Ok so here is what is going on with my ATRIX... I have searched for answers and not found any so here I am. I wonder if anyone else has seen this. Please note I am not new to flashing, rooting, romming, etc... This week is my first go around with the ATRIX (or any other moto for that matter).
So I went from rooted 1.8.3, unlocked the BL, and was immediately prompted for the 4.51.9 OTA upgrade. I did this and everything was fine when done. No data loss or issues. I of course lost root and the unlock, so I went to taking care of this.
I rerooted but waited a few days and read more before unlock because of known brick issues. I didnt want to be there!
next I decided to try ROM MANAGER to flash CMW. Flashed but of course needed to unlock BL so I used the auto method by mramirez (auto script for known methods). Anyway no matter what I did after unlock I had to reflash everytime the recovery to be able to boot into it. It would not hold, and after 1 or 2 boots I would be back to android stock recovery.
So then I decided to try a rom or to. Flashed ninja and gingerblur with no issues, wiped data, cache, dalvik and rebooted into new rom with all my data still intact!!!! I wiped again, factory reset from recovery... still there! I did a factory reset from within android... still there!!!!
SO.... next I decided I need to flash moto firmware 4.51.9 to get back to stock. Did this and rebooted. Back to stock YES. Rooted-NO. All data still there!
SO... I reunlocked with the method that should have wiped my device and rooted again, install tenfar's CWM. Rebooted and all my stuff is still there!
Guys I am talking everything, accounts, wifi settings, alarms etc. All this flashing and wiping and resetting and I still retain everything!
Anyone care to take a stab at why?
EDIT: So far this time around CWM has stayed put after several reboots but I have not tried a reset today. (It is kinda nice not losing all that but I am pretty sure I should have lost it!)
You just need to delete the following file first:
/system/etc/install-recovery.sh
then you need to install again CWM as you did before.
What is happen is everytimr you reboot the phone is checking the recovery partitions and if the check is different it will rewrite the stock recovery, so you need to delete or rename that file and that will solve the issue...
Related
So like the title says, I SBF'd my phone yesterday to start from scratch, and now the damn thing is boot looping. I was running LB .5 on .595, and flashed the VRZ_MB810_2.3.34_1FF_01.sbf file using RDLite 4.8 (same thing I've done before, just not while on GB).
I've tried SBF'ing it a few more times, and I've let it sit, trying to boot, for 20+ minutes. The SBF seems to go through successfully. The result says PASS, so then I reboot the phone, and then boot loop.
Anyone have any suggestions?
Well, nevermind...instead of doing those multiple SBF's, I should have just looked around. Found this on droidxforums.com, and it's going through the activation now.
http://www.droidxforums.com/forum/droid-x-rescue-squad/14548-bootloop-after-flashing-sbf-file.html
You always need to wipe data and cache a few times before SBF'ing or installing any new ROM from scratch. Only with incremental upgrades to existing ROMs where the ROM chef says you don't have to wipe, can you avoid doing so.
Well, I didn't think I needed to specify, but yes, I wiped data/cache/dalvik when I flashed the ROM. So I don't really know why I then had to boot into stock recovery and do it again.
How many times did you wipe them? It doesn't work like deleting regular files on a computer, you need to clear them at least 3 times each. I don't know the details as to why, but never clear data/cache fewer than 3x. I do 5x.
weird.... mine usually works and on the pc just stops on 99% eventhough it's done and working. And once it bootlooped after installing a custom ropm and coudn't access both clockwork or original recovery so sometimes it may work, sometimes it may not work.
I made the mistake of encrypting my phone and am now paying the price. It is rooted and I had installed the Google Edition 4.4.2 ROM by Danvdh, Kryten2k35 & Ktoonsez. I'm using TWRP 2.7.0.1.
I first tried going into recovery and doing a factory reset and got the an "Unable to mount '/data'" error, followed by a big red FAIL. So I rebooted into the system and tried to do a factory reset from there. Went through all the steps, phone rebooted into recovery and I got the same error - unable to mount.
So I did a bit of searching on the forums here and someone had suggested using the format option in TWRP. So I did that and it seemed to work - did not get the dreaded unable to mount error. So I tried flashing the new rom (the updated version from a couple of weeks ago). Got a message indicating it was successful. Rebooted, and to my dismay, got the prompt for the encryption password. Saw the little line drawing Android, then... nothing - I found myself in brick land.
Managed to get back into TWRP and, based on another post I found, tried Advanced Wipe, selecting everything except Micro SDcard and USB-OTG. Tried installing the new ROM again, says successful, but nothing has changed - I still boot into blackness after inputting my encryption password.
Not sure what else to try. Any suggestions would be most appreciated.
not_su said:
I made the mistake of encrypting my phone and am now paying the price. It is rooted and I had installed the Google Edition 4.4.2 ROM by Danvdh, Kryten2k35 & Ktoonsez. I'm using TWRP 2.7.0.1.
I first tried going into recovery and doing a factory reset and got the an "Unable to mount '/data'" error, followed by a big red FAIL. So I rebooted into the system and tried to do a factory reset from there. Went through all the steps, phone rebooted into recovery and I got the same error - unable to mount.
So I did a bit of searching on the forums here and someone had suggested using the format option in TWRP. So I did that and it seemed to work - did not get the dreaded unable to mount error. So I tried flashing the new rom (the updated version from a couple of weeks ago). Got a message indicating it was successful. Rebooted, and to my dismay, got the prompt for the encryption password. Saw the little line drawing Android, then... nothing - I found myself in brick land.
Managed to get back into TWRP and, based on another post I found, tried Advanced Wipe, selecting everything except Micro SDcard and USB-OTG. Tried installing the new ROM again, says successful, but nothing has changed - I still boot into blackness after inputting my encryption password.
Not sure what else to try. Any suggestions would be most appreciated.
Click to expand...
Click to collapse
Can you go into download mode, revert back to a stock rom (or flash a stock one or something) and turn encryption off? edit: on further research it looks like the only way to completely unencrypt is to reset your device. dunno if that's something you'd want to try, but considering you already wiped multiple times.. i'd say try it?
Also what carrier do you have? That's pretty important. AT&Ts i337 and Verizon's variant cannot flash AOSP roms (more specifically, kernels) due to the bootloader being locked. That might be the issue you're experiencing? I looked up the ROM and it's using ktoonsez kernel, so I imagine that'd be why. Someone just made a version that does not include the kernel and has multiple issues the ROM you're trying to use fixed here.
Rhymey said:
Can you go into download mode, revert back to a stock rom (or flash a stock one or something) and turn encryption off? edit: on further research it looks like the only way to completely unencrypt is to reset your device. dunno if that's something you'd want to try, but considering you already wiped multiple times.. i'd say try it?
Thanks - that's exactly what I've been trying to do. I haven't tried reflashing back to stock with Odin though. Hmmm...
Also what carrier do you have? That's pretty important. AT&Ts i337 and Verizon's variant cannot flash AOSP roms (more specifically, kernels) due to the bootloader being locked. That might be the issue you're experiencing? I looked up the ROM and it's using ktoonsez kernel, so I imagine that'd be why. Someone just made a version that does not include the kernel and has multiple issues the ROM you're trying to use fixed here.
Click to expand...
Click to collapse
Bell, up here in the Great White North. I don't think locked bootloader is an issue - I was on the previous version of Danvdh's ROM, and everything was hunkydory. I just made the unfortunate decision to encrypt. Big mistake.
May try flashing back to stock. Nothing to lose, at this stage...
Thanks!
Hey just wanted to mention for the benefit of anyone else who got into this bind, flashing back to stock using Odin did the trick. Still wouldn't boot, but then I rebooted into stock recovery and did a factory reset, and finally was able to reboot back into stock. What a nightmare. Ugh. Thanks for the tip though - never occurred to me to try to go back to stock. Lesson learned though - no more encryption for me!
not_su said:
Hey just wanted to mention for the benefit of anyone else who got into this bind, flashing back to stock using Odin did the trick. Still wouldn't boot, but then I rebooted into stock recovery and did a factory reset, and finally was able to reboot back into stock. What a nightmare. Ugh. Thanks for the tip though - never occurred to me to try to go back to stock. Lesson learned though - no more encryption for me!
Click to expand...
Click to collapse
Good to hear. Should be able to flash to the rom once again no problem now that it's unencrypted!
Well this is my 1st post so first of all hey everyone
I just spent a week in Amsterdam and my phone restarted twice, different times different days and I dont remember what I was doing with it back then.
But as I landed back home I put the phone back from "Airplane Mode" and went on to toggle "Cellular Data" on.
The second I pressed the cellular data shortcut on my the phone restarted itself but this time whenever it would finish the screen would be on but fully black and sometimes it'll show battery precentage at the top but then will restart again in an infinite loop.
Sometimes it'll pop up the "Optimizing Apps" window and will go through all 24, upon finishing it will restart once more and do the same.
I tried using the bootloader and it worked (the bootloader that is) but the phone would do the same thing even after Rebooting from there or shutting down from there and then turning back on.
I contacted tech support on chat but they couldnt help past telling me to go to bootloader and reboot, said I should factory wipe when it failed.
Also tried wiping cache but to no avail.
I have no backup of my phone (wanted to do one before the flight but got lazy and I suck for not doing one sooner) since probably October and google doesnt backup my contacts properly for some unknown reason.
I already downloaded Android Studio with everything included for me to try using adb to sideload stock without wiping but its my first time and I couldnt get it to do anything at all...
I already got the official stock .gz file from the motorola website.
Anyway here are the specs to my phone:
XT1575
Everything is stock. didn't root or change recovery once in my life.
Was fully updated and had plenty of drive space (I have almost 128GB with the 64GB version + 64GB SD)
I'm really lost here so help will be very appreciated.
Thanks in advance,
-Noam
Start with a full wipe and if that doesn't work flash the stock image. Not sure what your question is though as you never really say. Once fixed I would unlock and make a backup so you don't have to deal with this again.
lafester said:
Start with a full wipe and if that doesn't work flash the stock image. Not sure what your question is though as you never really say. Once fixed I would unlock and make a backup so you don't have to deal with this again.
Click to expand...
Click to collapse
The thing I pretty much want to know is if theres a way to either backup the phone now with it connected to the computer while in bootloader or recovery. or a way to flash the stock rom without wiping which I read someone did with his tablet. I cant post source normally because I'm a new user so here it is but change spaces to dots: schnouki net/posts/2014/08/13/flashing-a-stock-android-image-without-wiping-user-data/
Also while in recovery I noticed 2 options under wipe: 1. userdata only. 2. userdata+(insert something I dont remember here) and I was wondering what gets deleted in both? if I delete only userdata what data will remain? something helpful?
Sure you can try flashing without wiping data but being locked I personally wouldn't risk it. No idea about backing up in your state... somewhere I remember a thread on backing up without root try searching in q&a.
lafester said:
Sure you can try flashing without wiping data but being locked I personally wouldn't risk it. No idea about backing up in your state... somewhere I remember a thread on backing up without root try searching in q&a.
Click to expand...
Click to collapse
Out of curiosity why shouldnt I try flashing with no wipe if ill lose the data anyway? worst case wont I just have to wipe after it fails and flash again?
And I will try thank you
Do you have any knowledge about the 2 wipe options?
Thanks in advance
Well I tried turning the phone on and it took a couple of minutes before loading to a fresh start. It apparently wiped itself on its own. Managed to restore almost everything.
Anyhow the phone takes too long to boot now. Was even stuck at boot and I had to restart it.
Anyway to fix my software? Or at least check for corruption?
Sent from my XT1575 using XDA-Developers mobile app
For a week my G935A worked fine... direct out of the box I flashed ENG Kernel and Rooted, then installed apps and configured - no issues.
Today it was working then it hung on wake.. I tried to reboot and now it gets stuck at the AT&T logo and vibrates 3 times - over and over
I can get to Odin and Recovery screens easily so I tried to flash the ENG Kernel again & deleting Cache Partition few times - didnt fix it.
Also tried booting into Safe Mode - it never gets there, stays at AT&T logo.
When I go into the Recovery menu, I see at the bottom, in red... "dm-verity verification failed"
Anyone know how I can recover from this without Factory Reset? It took 6 hours to reinstall and config all my apps - really want to avoid that.
thx for the help!
as far as I know there is no way to fix and save your stuff. I had the same problem with G930A and even doing a factory reset would only allow my phone to boot but then I get apps crashing and then a reboot puts you back at ATT logo and the vibrates. Best to ditch the whole engboot and go back to stock until a more stable rooting method comes out.
Some searches shows posts that say using Odin to flash HOME_CSC without having to wipe and everything survive
... Where can I get HOME_CSC? I dl'd stock rom and dont see it in there.
thx!
Same here this morning on my 930A w/ PK1....went to watch a youtube vid and everything google related began crashing.
Only been on engboot for a couple days but did flash the v15 debloat last night. hmmmm.
Any luck with the files or procedure LivinOne?
Update: Flashed the PK1 CSC and got into recovery.
Wiped cache and reboot, same failure mode....sad face.
Flashed CSC again, into recovery, factory reset, wiped cache.
Back to setting my "new" device up.
Dec 30 update: Same crash, SEMI same problem.
I get the single vibration followed by the 3 vibrations after I put my pin in from a restart.
Same symptoms prior, all background activities began crashing.
Running all PK1 files from QRhinehardt post.
Any thoughts?
I ended up wiping and flashing the T-Mobile firmware and using the ENG bootloader (but not rooted yet). It is WAY faster than the AT&T was. I've only had issues with Wifi Calling (it doesnt seem to work most of the time)
s7 at&t
Hi, did you first flash with eng bootloader and then tmobile rom? I miss this step...I appreciate your help please
Single vibration followed by the 3 vibrations
Hi, were you able to fix the problem? I'm also getting the single vibration followed by the 3 vibrations.
Do you know why is this occurring? I performed a wipe cache and factory reset but still nothing.
bweegn said:
Same here this morning on my 930A w/ PK1....went to watch a youtube vid and everything google related began crashing.
Only been on engboot for a couple days but did flash the v15 debloat last night. hmmmm.
Any luck with the files or procedure LivinOne?
Update: Flashed the PK1 CSC and got into recovery.
Wiped cache and reboot, same failure mode....sad face.
Flashed CSC again, into recovery, factory reset, wiped cache.
Back to setting my "new" device up.
Dec 30 update: Same crash, SEMI same problem.
I get the single vibration followed by the 3 vibrations after I put my pin in from a restart.
Same symptoms prior, all background activities began crashing.
Running all PK1 files from QRhinehardt post.
Any thoughts?
Click to expand...
Click to collapse
Good morning.
After almost 3 years with no problems with a XT907, I have again an issue with it (this time, my father's one). Again, I come to you requesting help.
It all started with all apps crashing over and over. With an old XT907 I have for emergencies, the common fix method is flashing VZW_XT907_4.4.2-KDA20.62-15.1_1FF.xml.zip with RSD Lite v6.1.5 and all solved.
I tried that method with my father unit, and when it started again, all process were still crashing. I thought it was still nothing (just a harder issue), and tried flashing VZW_XT907_4.4.2-KDA20.62-15.1_CFC_1FF_SVC.xml.zip, just deleting all his data, to fix it.
When the process ended, it turned on and it had still the same problem. In this point, I got worried the /system and /data partitions got locked
I re-started, went to stock Recovery, and wiped system and cache. Then, went to Fastboot a third time and tried again flashing VZW_XT907_4.4.2-KDA20.62-15.1_CFC_1FF_SVC.xml.zip. Guess what? Still the same problem
The phone turns on, but ALL apps keep crashing over and over. I can't even take an screenshot, as it immediately reboots.
Someone know what happened with it? And... how to fix this issue?
To make things worse
Fastbook Locked
No Root
Last 4.4.2 stock ROM
by twrp try make Wipe Data Or Repair File System, if not done mybe your internal memory Currpted