Hello..i just bought a second hand stock HTC HD2 which had the stock rom from O2 UK 1.43.*** After going on to htc support i ofund that there was an update for my phone, so i downloaded the new ROM which is 3.14.206.1. After installing the rom, the phone tried to reboot and it got stuck on the O2 welcome screen. I did the same procedure again, but same thing happened. I tried installing the 3.14 WWE rom from your site, but that failed, with an error 294: Invalid vender ID.
The phone was working perfectly fine before i do anything to it. Can anyone help me?
Please advise on what to do
P.S: when the 3 colour screen is on it says SPL 3.03.0000 XE
Related
Hi,
I have tried to flash a wiza200 that was already flashed with a manila rom, I checked that it is a G4. I used TNT.20273 Professional Wizard HTC Home FREE ROM, it seems to work , romupdate utility indicated that the device was flashed successfully but it reboots on bootloader screen. I tried to reflash it it gave the same result, I tried another rom but impossible to flash it with other roms. So I downloaded the official one from the operator O2 but I got "invalid vendor" message. I searched all the possible solutions but none of them worked( wizard love also). Is there a savior here ? someone who can give me the right procedure to follow.
initially the IPL was 2.21.0001 and spl 2.21 Olipr
now the IPL is 2.21.0001 and spl 2.21
Thanks
Best regards.
You must replace the Update.exe with a MaUpgradeUT_NoID.exe . Found here in Forum . Look in "Blue Angel" for it. Be sure that you flash the right ROM with it . It will no ask...
First of all, Hello to all of you, cause I'm new on this forums
Second- my problem...
I tried recently to upgrade rom in my phone. After installing localisation (polish_ it stuck, that's the thing that happens to branded phones, not only me... So I tried to install this ROM again (3.14) from card with HSPL. It installed SPL 3.03.0000 itself... And then crashed. Now I Have info:
SPL-3.03.0000 XE
"Upgrade ROM code error Please try again"
Can anyone help with repairing my phone to any working state? Or must I send it to service repair?
Hi
You have to go in (BOODLOADER MODE)to go back in you original ROM!!!
you have to press the volume button both up and the down volume button at the same time and start you phone, all at once, I know it`s very difficult but possible.If you see the 3colored screen,stop bushing the button, after that look at the screen and he will tell you what you have to do.(he will delete all the files what you have try to load on you phone,don`t worry about, after that you will be on you original ROM again.
Hi there everyone!
I installed a NAND Android Rom Dl Desire Z or something... everything was working, but suddendly phone just crashes, and nothing but a white screen appear as soon as HD2 powers on.
The only thing i'm able to do is to go to 3 color mode (hardspl) - but all attempts to flash a wm6.5 rom failed because customruu failed in the middle of the process. freezes at 0% and then appears a communication error in the application.
Conclusion: as soon as phone turns on, only a white screen appears, with nothing written in it.
i've searched for 2 hours in xda and google, nothing similar came...
i've reflashed hardspl3 - sucessfull, but nothing changed, white screen still appears.
i've tried to flash other roms but always freezes at 0%, and appears communication error in customruu application.
I don't know what to do :/
Is there anyone who can help me?
Thank you very much!!
If you can still get into bootloader and you do have hspl installed, try flashing the winmo rom via sd card.
Will do!
I'll post feedback
Start flashing official 1.66(its EU, you need analog to 1024 LEO) WM 6.5 rom from HSPL, than HPSL3, radio with 576 RAM(Radio_2.15.50.14 for example), than MAGLDR112, and after these steps flash Android
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Hello
Im thinking maybe your motherboard as many tmous users ?.. just thinking..maybe?? I don't hope it for you
Sent from my HTC HD2 using XDA App
It doesn't make sense :S
I never had any problem with it, and it was running a new Android rom for the second time.. then I take the phone out of the pocket and it is with a white screen...
I can get to the hspl boot but it isn't proving useful...
Any thoughts?
Hello;
I have a vodafone HTC elf phone
I flashed it with this ROM onyx_6_release14_2
it worked for a while than it broke down
when I try to open it it shows up starting screen Vodafone and directly shut down and does not boot up
i changed its IPL to to 1.17.002 and its SP to 2.28.0000
but now it does not even show up the starting screen Vodfone
any Help please???
Htcself010050—
please help me.i have this htc end i want to find original ruu becase is blocated in bootloader. ipl 1.17.002end spl 1.17.0000.
My htc hd2 is stuck on o2 welcome screen after running ROMUpdateUtility. First, the version of my phone was 1.66 then I unlocked it to 2.08 hspl by using hspl3, to root miui then I started ROMUpdateUtility and since then it is stuck on o2 welcome screen
please suggest me something? I have searched all over the internet but still can't find any solution
If it is not possible then is it possible to install windows back again?