I'm running Virtuous Unity. I downloaded the Hulu Plus app yesterday after hearing that the MyTouch 4G was now supported. However, when I run the app, I get a message that the device is not supported. I think this is because the rom is set to show the device as being an HTC Sensation which the ROM is based off of but a device not supported by Hulu Plus. Is there anyway around this?
Also, I noticed on this rom that when using wifi calling, when I answer an incoming call, the caller can't hear me nor I them until I put on the speakerphone. I can than take it back off speaker phone and resume the conversation. Anyone else experience that on this rom?
Related
I was able to get Internet Calling (integrated VoIP) on the mogul working with the Gizmo VoIP service. The big problem is that the volume is so low it is pretty much unusable. I followed all of the guides here on xda and came up with the same issue as everyone else; i could not get internet calling to show up on the today screen and i did not have any of the internet options under the phone settings. What solved it for me was Schap's Setup VoIP tool version .3. This tools gives us the ability to now set the items that us Mogul users do not have available under the phone settings.
In a nut shell:
1) install WM6VoIP.CAB then reboot
2) install SetupVoIP_v0.3.cab (Schap's VoIP tool)
3) open Schap's config tool and set:
a) all of your SIP settings.b) Set outgoing calls using VoIP to Whenever available.c) enable VoIP over 3G.
Now when you go to your phone dialer it should now show the name of your VoIP service at the top rather than your carrier (Sprint PCS in my case). You will have to force your internet to connect first (i use PIE to start my internet connections up, not sure of a better way to do this.) Now you will be able to make and receive VoIP calls. I have verified this by calling another phone and seeing that the caller ID is from my VoIP. I have also been able to stay on a call and browse the web at the same time (not normally possible on sprint). The 1X icon never appears over my Evo icon while on the phone now. Interestingly enough i could not get this to work over WiFi, it would only work on Evdo.
This integrated VoIP is so seamless that it pains me to use another app just because of this volume issue. I have tried:
Skype. Works great, but not with Gizmo.
SJPhone. Works with Gizmo, but is VERY choppy.
GoSip. Works great with Gizmo, but is very big and slows the phone down.
Fring. Works great with Gizmo and the mem usage is great, but has no dial pad and that pretty much makes the app useless.
Wengo. Works great with Gizmo. Mem usage is on the big side, but is manageable. Seems to be the best for me so far.
I have tried many others that either work as dial out only or only work with their makers SIP service.
Any other ideas or thoughts?
Thanks,
JD
You got the mic working using Fring ? I always got one way audio
What version of WM6VoIP.CAB did you use ?
The mic did work for me on fring. However, the instant that i realized that i didn't have a dialpad i removed it. I use VoIP mostly for conference calls and i need to be able to enter in conference room passwords.
How would i be able to tell what version of WM6VoIP.CAB i am using? I cannot find version information anywhere.
JD
You are lucky with the Fring since there is many complaints from Mogul owners that Mic doesn't work
What version did you use ?
When I was searching for the WM6VoIP.CAB there was indication that there is some new version but the link was dead when I tried to download
Can you please post it here?
When i tried Fring it was a few months ago and i don't remember the version number. I do remember using my bluetooth headset for SIP rather than the internal mic and speaker. I just tried the newest version of fring (downloaded last night) and my internal mic and bluetooth headset now do not work for SIP. Interesting.
For WM6VoIP.cab I searched here on XDA and downloaded the first link i found. Here is the one that i used, not sure if there is a newer version? http://218.93.115.138/d900/patch/WM6VoIP.CAB
JD
That's the same I'm using ... I did read some article about this couple weeks ago ( can't find it) where there was reference and non working link to new version of this file.
Did you read this post ? :
http://www.eten-users.eu/lofiversion/index.php/t8854.html
There is reference to switch.cab ( can't find link to download it )
switch.cab
Try this:
http://www.etenblog.com/downloads/Software/switch.cab
I did, it did install ok but it doesn't work
Thanks
well i tried the configuration and everything, but the thing is that when i try to call out it says dialing then it says call ended, like it doesn't even ring. I entered the correct settings and everything.
I did everything and it DOES NOT show on my Today screen, I see the item "Internet Calling" checked in the today screen options. Any ideas?
Telus phone right ?
I if so that's normal with the Telus ROM
lifeisfun said:
Telus phone right ?
I if so that's normal with the Telus ROM
Click to expand...
Click to collapse
No, I have a Sprint Mogul with the "unofficial" leaked GPS rom. Anyone else know how to fix this? I really need this to work, thanks a lot.
It will not show on your today screen. When you go to your dialpad, the name of your VOIP provider should be listed at the top rather than sprint. If it shows that then you should be good to go.
JD
When you make a call, does the sound come through the earpiece or the speakerphone?
How can I have the sound coming from the speaker on the screen side instead of the back speaker?
Thanks!
I'm afraid you can't
as we all know, the AT&T Atrix has problem with most VOIP softare. Just wondering if the Canadian Bell version is also experiencing the same problem? If not, that means AT&T is doing more than just turning off HSUPA...
I bought a Bell Atrix two days ago and I am DEFINITELY having issue with Skype either thru. WiFi or 3G connection. I am unable to make clear calls and often encountered LOUD STATIC sound on the earpiece.
Please assist...
RN-Eric said:
I bought a Bell Atrix two days ago and I am DEFINITELY having issue with Skype either thru. WiFi or 3G connection. I am unable to make clear calls and often encountered LOUD STATIC sound on the earpiece.
Please assist...
Click to expand...
Click to collapse
No can't do at this moment. Need to wait for Motorola to sort this VOIP issue.
Sent from my MB860 using XDA Premium App
Well, I really do hope Motorola will address this issue...
IM+ Talk Skype Calling
Just an update to using the newly purchased IM+ Talk, a web-based Skype calling service. Well, it took me a whopping two-hour to figure out how to make calls and it was super frustrating...I subsequently had to purchase another Skype subscription (unlimited world, in addition to my original unlimited calls to Hong Kong plan) because of the call-back feature IM+ Talk uses.
So how it works is that you enter the CALL BACK number of the device you are calling on, enter the number you want to call, press the CALL button, and then your device will ring. Answer the call and you will then hear your number connecting. I don't know how to clearly explain it but it works on my Atrix thru. 3G connection
.Eric
im using an att atrix on Fido in canada and i can use skype just fine. i think its att network that is blocking this somehow not the atrix itself or maybe the combination of the two. so if a bell atrix allows voip on bell network it might still not work on att network.
I am using a Bell Atrix on Rogers and am having a hard time using the Skype for Android to work properly. I previously used Skype on my iPhone 4 (also on Rogers) and it worked like a charm...
I am surprised that it's working for you on Fido. There is a big thread from the Motorola support forum that discusses about this issue.
BELL Atrix ain't working on Fido. none of VOIP apps is, tried Tango, Skype from Market, Skype hacked for 3G, SIPDroid Csip, Fring........
Sux....
sorry I made a mistake. it doesn't work for me the sound is horrible. I only install and made a call and assume it was working.
If the problem with Skype is sound quality it may be that Skype needs updating to support the phone properly. In my experience with Galaxy S the sound quality was horrendous for the first while (that Skype was even functional) until updates sorted things out. Actually it took a while to even be able to login, when it could first be installed it wouldn't accept any login info. Picky program.
Atrix, Skype, IM+, ClickTalk, Tango vs Bad Audio
I've the same problem as all you and i've try the following apps like Skype, Skype(3G), IM+, ClickTalk, Tango and Yahoo....
All exept the Yahoo is work badly with the audio, it cutting off and here i'm talking about using WIFI connection ... with the 3G forget about-it.
Only Yahoo look to get a good result and not mentionning that only the Qvix, Yahoo and Tango as the Video working correctly
As winner the Yahoo Video and Audio work over WIFI.
I'm using also the SMSSpeak, Call Annoncer and EmailSpeak, the playback are for unknown reason playing back too fast. To fix Reboot the phone, i think the audio driver as something to do here too.
I've read also for our Bell Canadian friend that the Firmware is out of date... like far away ... AT&T as the patch to fix this problem of audio in the next release 1.57 and BELL CACA is still at the Beta 0.83 no fix planned!
After chatting with a tech at Motorola we can't dream for a new version until the new kernel will be availlable to get the Android 2.3 (What a great one i was using this on a real google G1 this is a real charm) ... So since we known that BELL, ATT and Motorola are not reading our note, it's useless to try the get them to move ... exept to get everyone who as a Atrix to Call/Email/Fax Motorola,Bell,ATT,Fido ....
and btw Moto is coming with a new phone... they act like this is just junk hardware like a batterie. Change phone to fix.
This is the second time i've asked this question. I hope someone can assist me this time. I flashed the RoyalMIUI rom however couldn't get wifi calling to work. i know about the issue were is FC's when you first turn on wifi and you have to pull the battery out. but i've yet to see a real answer to the actual wifi calling. can someone please help!!!
thanks.
I think I read somewhere on that roms page that wifi calling doesn't work with that rom but I'm not sure
Sent from my HTC Glacier using XDA App
Wifi calling does not work on miui afaik.
Sent from my HTC Glacier using XDA App
I appreciate the response from both of you. I just wanted to verify if it worked or not. The roms awesome other no wifi calling feather.
The rom has voip its build in gingerbread since gingerbread has built in sip intergration which is more of a true wifi calling. The wifi calling app for tmobile isn't really wifi calling.
MIUI+LvBfskernel+launcher pro=fastest smoothest experience yet on android.
ok cool. thanks. i'll try that. do you know of any issues with bluetooth? i normally sync my phone to my car (for obvious reasons). however, with this rom i did and i couldn't hear the person i was calling. i could answer but thats about it.
SpYDaGurl77 said:
ok cool. thanks. i'll try that. do you know of any issues with bluetooth? i normally sync my phone to my car (for obvious reasons). however, with this rom i did and i couldn't hear the person i was calling. i could answer but thats about it.
Click to expand...
Click to collapse
I not sure don't have a bluetooth headset to find out if it does work. Only thing is try a different kernel. See if bluetooth is working with out syncing with the car first.
MIUI+LvBfskernel+launcher pro=fastest smoothest experience yet on android.
I've searched everywhere for a solution to this, tried both the official Skype app and the modded one that supposedly allows more devices to video call and I just can't seem to get it working.
I have an i9023, and whenever I start a video call, I'll see myself for a few seconds and then it'll just go back to voice calls.
A lot of people seem to have this issue, is there any kind of workaround or solution that I haven't found yet? I'm using WiFi so its not a carrier issue.
Thanks in advance.
Using 9023 with stock ICS. Tried skype video a few times and it's working fine.
Sent from my Nexus S using XDA App
Hello All,
This is my first time to XDA and im hoping i am able to find a solution to a very frustrating problem!
I just recently bought a LG G2 (LG-D802) in the UAE. It is running the android 4.2.2
Now, everything on the phone works absolutely perfect, except, VIDEO CALLING through softwares! I tried connecting via skype - messaging works fine, however, when i try establishing a video call - the app either restarts, i get a message saying that call failed, or i get a notification showing that the person i was calling, is calling me which is NOT TRUE.
There is not problem with the app as i have tested this on the S4 to the Iphone 5 and works perfectly well. S4 to S4 too.
Secondly, i am unable to establish video calling on hangours as well
Everytime i try to connect - its connection timed out, please check your network.
I have tried this over wifi and 4G.
The phone is a beast but its sad that this does not work.
Anyone else facing the same problem? Solutions?
Thanks for all the help!