Database Users

P4350 " invalid vendor"

i have a problem with one HTC p4350 hera100 his rom is in espaniol and i want to change rom in english with HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe and say "invalid vendor id" i read on this forum and i follow steps of "hdubli" when press " e" everything goes ok but i have one problem when i press "w" for write rom the software don't show me any roms,(i have extract the nbf file and i put os.nb rename to os.nba ) when i p[ress any number it goes out! do u know what problem is! thx!

Do the HARDSPL and you will be able to flash any rom you want.
HARD-SPL

my ipl is 1.xxx what can i do!!! are u shure it work?!?

Read the post and see if it will work for you.

i try with HERALD-USPL-beta3 and now is dead!!! no boot no anything!!! what can i do!!! pls help me
!!

frunzygsm said:
i try with HERALD-USPL-beta3 and now is dead!!! no boot no anything!!! what can i do!!! pls help me
!!
Click to expand...
Click to collapse
try and ask ivanmmj - he is used in falshing with uspl.
soryy

USPL, just like HardSPL requires your SPL to be 4.0.0.0 or higher. You had to run the stock RUU to update to WM6 FIRST to update your SPL. Now, unfortunately, unless you're really lucky, you'll have to bring it in to a repair center. I'm sorry. But first, try to run the stock RUU and see what happens.

Oh no. USPL and HARDSPL are 2 different things! thats why I posted the link to the HardSPL in that post.
Now you need to install your stock RUU to unbrick your device.

duprade said:
Oh no. USPL and HARDSPL are 2 different things! thats why I posted the link to the HardSPL in that post.
Now you need to install your stock RUU to unbrick your device.
Click to expand...
Click to collapse
Well, the only thing I'm worried about is the partition tables being slightly different in the different SPLs and therefore, trying to write them with an SPL of 4.x when the device is formatted to an SPL of 1.x, it might cause a problem. Two different issues, but still issues none-the-less. But that's just a guess.
If you can place the phone into bootloader mode and flash the RUU, then you're right. Hold your camera button while softresetting to get into the booloader menu.

sorry but i cannot understand in that phrase the sintax of "stock ruu" can u help me! meens all ruu that's i have??!?

hy! i read all posts about htc p4350 and i decide to use the HERALD-USPL-beta3 and now phone is dead only bootloader, i try with original flash from spain from support and says" invalid update tool"! here is the story:
i have one htc p4350 with ipl 1.08.0001 and SPL 1.08.0001 from spain and i want to change language to english, i donwload de rom WWE from forum and says "invalid vendor" and i decide to write de nbh file with this program and now phone is how that i say to you up! So u know a metod to write any rom in that situation?? if u know pls help me! thx! so if somebody know a good solution pls share it!

can anybody help me pls!! how can i jump spl into ram or how can i flash a new rom now from bootloader mode!!!

Maybe Try different RUU's to see if one of them works.
What is your phone company? Maybe they have the RUU on their website if you try logging into your account.

my htc is from spain do u know what operator sell this this htc!

I'm sorry. As I said, you'll have to bring it in to the repair center. USPL jumps a hacked SPL into memory. The problem is that you had a pre-4 SPL and that they're not compatible.

thx ivanmmj! i understand but u know how people are...we must hope! for now i see that is no solution but in future u can get one? now i have to pay de phone to customer (!!

Pleasee, help me, please help me

My Gene (older Gene) had this configuration:
ONBL 1.11.0000
SPL 1.10.Olip
It worked very well with WM6.5
But when I downloaded the orefkov spl to unlock it will not turn over and just enter bootloader mode
Now this:
ONBL: 1.11.0000
SPL: 1.07.Oref
Please help me, I do not know what to do
Everytime I try to install the new rom, even as a unique, does not work and displays the error 300 in ROM Update Utility
Help me
please!!

I redid all the method described by Orefkov
I tried several roms, but when it comes time to write the rom on the device, is at 0% and the RUU gives error 300
I do not know what else to do.
This happened after I try to unlock CID.
Somebody help me, please, this phone is not mine.
Show me some topic, whatever.
I also tried the method to make it boot from the SD CARD, but I could not make it work, maybe cuz this is the old gene.
Help me ..... please!

mobilicity htc snap s520 flash rom help please

hi, anyone can help me, my htc snap s520, spl 1.24
i used jockyw hardhspl ,,,follow guide ,, it said all done successful
but my spl still 1.24 not 1.19

Same problem!
yes.. help us.. same problem it all looks like it worked fine and then i reboot and im back to the same spl and nothing has changed at all.

Same problem here. Bricked my Snap.

Me too..need mobilicity snap MAPL100 SPL 1.24 official ROM. Stuck at startup and wont take any other rom.

rapswiller said:
Me too..need mobilicity snap MAPL100 SPL 1.24 official ROM. Stuck at startup and wont take any other rom.
Click to expand...
Click to collapse
I too have the same problem... mobilicity malp 100
when I boot in normal mode this rows appears:
smart mobility
B 00
G 61.36t.25.29AU
R 3.47.25.48m
D 2.08.82894
when i boot in bootloader mode this appears instead:
MAPL100
SPL-1.24.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
reset with volume up + power on key resets the phone and it says reset successful and then again gets stuck at the same initial screen... any help will be greatly appreciated... thanxs...
even rebooting with the SD card does not work...

[Q] HTC Touch Elf / ROM Problem

Hi
I have just updated the ROM of my French HTC Elf
The new ROM is official ( HTC_Touch_FRA_2.20.406.1B) from HTC support site
The problem: after the installation, done successfully , the HTC does not boot !!!
It shows me "Smart Mobility" then restarts
PS:
IPL : 2.20.0002
SPL : 2.20.0000
Soft and HardReset gives nothing
I can not make CId Unloak because I am blocked in mode Bootloader (No. ActivSync) thus I can not install Cooked ( custom ) ROM
Any solution ?
Thank you

Just go there http://forum.xda-developers.com/forumdisplay.php?f=372 , hit the Search this Forum button and write "stuck in smart mobility" and read the results, it will take time but you'll find your answer.
Good luck

I have already done a big research but no solution
I have 2 problems :
- I did'nt find an original ROM ( to my HTC_Touch_FRA )
- There is no way to CID Unlock from Bootloader ! I can't do a CID Unlock because my HTC stuck in "smart mobility"

PS :
Device: ELF0100
CID: HTC__203

Sorry to hear, did you also read the 1st sticky and especially this http://forum.xda-developers.com/showthread.php?t=406721#7.
If nothing works and the device is unusable, I would try some shipped roms with equivalent cid, even another language, flash them from SD card and hope to find a working rom, then cid unlock. I'm not telling to do that, just what I would
Bonne chance!

Bizarrely there is no official ROM with the same CID ( HTC__203 )
I don't find the original ROM ( factory ROM ) which was installed in my HTC !!!
How can I install ROM from SDcard ?! I have already put the file .nbh in SDcard but nothing takes place

this is how http://forum.xda-developers.com/wiki/index.php?title=Elf_SD_Card_Flashing

when i am flashing from a usb it shows invalid certificate please tell me what to do

[Q] htc trophy (Spar100) flash error [244] help!

Hi everybody,
I have installed on my vodafone SFR htc trophy, RSPL and then HSPL, after that i tried to install some cooked roms by ansar, after the flash process the phone did reboot to stuck in a black screen, pulling out the battery and placing in again the phone now stuck in the bootloader and went from being PC40100 as a Model ID to be like:
SPAR100 SS-BC (4K)
HSPL-1.10.2250.1(112663)
MicroP(LED) 0x09
Touch A1(v10,20)
and everytime i try to install any firmware even the phone's original stock ones i get the error INVALID MODEL ID [244], i've tried also to flash it using a Y-cable and a Goldcard and when i plug the micro usb cable in the phone while this later in the USB HOST MODE the phone stuck forever in CHECKING.., anybody has any idea how to fix this SPAR100 bootloader problem? thanks in advance.
--------------------------------------------------------------update-----------------------------------------------------
it did work the hex editing and i could bypass the invalid model id error, but now i'm stuck in the [266] error every time i try to install some stock firmware, and i get Radio Update Fail when trying it using the Y-cable, and when flashing a custom rom the flash process goes well until the phone reboots to stuck in htc logo with the 7 vibrates, and searching the [266] error they said about it, it caused when flashing a custom rom that erases a partition the stock firmwares use to install their bloatware so i'm trying more custom roms hopping that one of them finally successfully boots the phone, have you any idea what could be done to bypass the [266] error?

yakie47 said:
Hi everybody,
I have installed on my vodafone SFR htc trophy, RSPL and then HSPL, after that i tried to install some cooked roms by ansar, after the flash process the phone did reboot to stuck in a black screen, pulling out the battery and placing in again the phone now stuck in the bootloader and went from being PC40100 as a Model ID to be like:
SPAR100 SS-BC (4K)
HSPL-1.10.2250.1(112663)
MicroP(LED) 0x09
Touch A1(v10,20)
and everytime i try to install any firmware even the phone's original stock ones i get the error INVALID MODEL ID [244], i've tried also to flash it using a Y-cable and a Goldcard and when i plug the micro usb cable in the phone while this later in the USB HOST MODE the phone stuck forever in CHECKING.., anybody has any idea how to fix this SPAR100 bootloader problem? thanks in advance.
Click to expand...
Click to collapse
Sounds like you flashed the HSPL for the Verizon version of the trophy. The Spar100 is a name change so as not to flash roms not specific to the Verizon Trophy. All you should have to do is revert back to OSPL using the HSPL software which should allow you to flash a stock rom. See this post for more info http://forum.xda-developers.com/showthread.php?t=1195647. Hope this helps!!!

tonbonz said:
Sounds like you flashed the HSPL for the Verizon version of the trophy. The Spar100 is a name change so as not to flash roms not specific to the Verizon Trophy. All you should have to do is revert back to OSPL using the HSPL software which should allow you to flash a stock rom. See this post for more info http://forum.xda-developers.com/showthread.php?t=1195647. Hope this helps!!!
Click to expand...
Click to collapse
thanks man for your replay, but that's what i get every time i try to revert back to OSPL using DFT RSPL HSPL tool:
-------------------------------------------------------------
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkHSPL.cpp (301)
[Error Description]:
ModelID is 'SPAR1000'. Please report this info to DFT.
---------------------------------------------------------------
any idea how to change that SPAR100 to PC401000?

yakie47 said:
thanks man for your replay, but that's what i get every time i try to revert back to OSPL using DFT RSPL HSPL tool:
-------------------------------------------------------------
[Error Description]:
Invalid ModelID. This means that your phone not supported.
This installer supports only limited number of the phones.
SPARK, MOZART, MONDRIAN, GOLD, SCHUBERT.
If you have phone from this list, but still have this error, please contact with DFT team.
[Info]: USBWorkHSPL.cpp (301)
[Error Description]:
ModelID is 'SPAR1000'. Please report this info to DFT.
---------------------------------------------------------------
any idea how to change that SPAR100 to PC401000?
Click to expand...
Click to collapse
Honestly I don't but if it's a matter of just getting a rom on the phone you can change the model ID in the signed .nbh file to SPAR10000 using a hex editing tool and it should flash. Is it SPAR10000 or SPAW10000? My Verizon Trophy changes to SPAW10000. Regardless, the model ID is right there on the 4th line in the hex editor. Beyond that PM'ing one of the dev's, Cotulla or mwang from DFT, would be your best bet. Since the arrival of WP8 the experts seems to have abandoned this forum and it's just us noobs :silly: Sorry!!!
The bootloader will show 4 characters and only the first 4 numbers of the model ID, like SPAR1000 or P0401000. If you do use the hex editor only change the first 4 but leave remaining numbers as they are.

tonbonz said:
Honestly I don't but if it's a matter of just getting a rom on the phone you can change the model ID in the signed .nbh file to SPAR10000 using a hex editing tool and it should flash. Is it SPAR10000 or SPAW10000? My Verizon Trophy changes to SPAW10000. Regardless, the model ID is right there on the 4th line in the hex editor. Beyond that PM'ing one of the dev's, Cotulla or mwang from DFT, would be your best bet. Since the arrival of WP8 the experts seems to have abandoned this forum and it's just us noobs :silly: Sorry!!!
The bootloader will show 4 characters and only the first 4 numbers of the model ID, like SPAR1000 or P0401000. If you do use the hex editor only change the first 4 but leave remaining numbers as they are.
Click to expand...
Click to collapse
man i really appreciate for you your care, i had read about the hex editing in the DFT team's chines forum concerning the same issue i'm facing, and since i don't understand chines it remained not that clear for me what should be hex edited in the .nbh file, and now as you have shaded some light about it i'll give it a try,
I've already tried to PM some developers out there but they don't respond, may be too busy to do so..., anyway i'll try the hex editing thing and i'll let you know the result.
thanks.