Database Users

[Q] installing nan on hd2 PLEASE HELP NEEDED!

hi all i'm trying to install a nand build with magldr everything works fine and i follow the right steps untill i say to cwm load zip file from sd.
tried several roms with unpacking the intrd file with unrar/winzip/7zip
nothing works because my phone doesn't see the file
also tried to install the rom with and without system ,meta info,boot
only boot,only initrd.
tried everything only thing that did work was an old android build through the daf method.
who can help me and give me detaild clue's to let my phone work with a nandr build.
please help me!!!!

ikkeenjij36 said:
hi all i'm trying to install a nand build with magldr everything works fine and i follow the right steps untill i say to cwm load zip file from sd.
tried several roms with unpacking the intrd file with unrar/winzip/7zip
nothing works because my phone doesn't see the file
also tried to install the rom with and without system ,meta info,boot
only boot,only initrd.
tried everything only thing that did work was an old android build through the daf method.
who can help me and give me detaild clue's to let my phone work with a nandr build.
please help me!!!!
Click to expand...
Click to collapse
Hi,
I notice in your sig ,3.03 HSPL.
You should try with 2.08 HSPL.
The other thing is when you download the ROM,it comes as a zip file.DO NOT extract it.Just place it on the root of your sd card.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Flash radio...download HERE Enter bootloader:hold down volume button when you power on phone.When you are on tri-color screen,insert cable to usb.When screen changes from "serial"to "usb",proceed.
Open HD2 Installer:
Task 29 (Enter bootloader:as above)
HSPL 2.08 HSPL (Enter bootloader:as above)
MAGLDR (Enter bootloader:as above)
(when magldr has loaded,power on and enter by holding power button until you see magldr screen.)
Repartition according to ROM requirements.(via number 5 usb flasher)
(when this is done,Go to ad recovery>advanced>Partition SD Card.1024m with 0 swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.

ikkeenjij36 said:
hi all i'm trying to install a nand build with magldr everything works fine and i follow the right steps untill i say to cwm load zip file from sd.
tried several roms with unpacking the intrd file with unrar/winzip/7zip
nothing works because my phone doesn't see the file
also tried to install the rom with and without system ,meta info,boot
only boot,only initrd.
tried everything only thing that did work was an old android build through the daf method.
who can help me and give me detaild clue's to let my phone work with a nandr build.
please help me!!!!
Click to expand...
Click to collapse
Why the hell are you asking for help when you obviously havent even bothered to read a god damn thing?
Where did it tell you to extract the zip file??????
Please stop creating topic before even reading the simplest of instructions in the rom thread or any for the guides or stick topics, all your doing is cluttering up the forum for people who bother to look for the info.

@TheAtheist thnx for your support great to be helped
in answer did read other topics and instructions and even had help from dev and he didn't now what the f**k goes wrong.
@malybru thnx for your support and help tried all the things you said and haven't changed my sig but have radio 2.18 on my phone with hspl2.08
when i put the zip fil in my root en through cwm go to install zip file from sd card he doesn't see any zip or other file so thath is my problem.after doing all you said my phone says now E:failed ro mount /sdcard(no such file or directory)
E:can't mount /sdcard
any advice?

ikkeenjij36 said:
@TheAtheist thnx for your support great to be helped
in answer did read other topics and instructions and even had help from dev and he didn't now what the f**k goes wrong.
@malybru thnx for your support and help tried all the things you said and haven't changed my sig but have radio 2.18 on my phone with hspl2.08
when i put the zip fil in my root en through cwm go to install zip file from sd card he doesn't see any zip or other file so thath is my problem.
any advice?
Click to expand...
Click to collapse
Use a different sdcard or try properly formatting it. Use Panasonic sdformatter full+overwrite and size adjustment on.
Also task29 your device then re-install magldr.
Also you saif you read topics but you didn't read them properly otherwise you wouldn't be trying to extract the cwm zip file folders.

used panasonic all you said but device says still can't mount sd card and i'm not in position to put in ohter sd card all shop's are closed here?
can still flash the old rom with darkforces method
and my sd card is recosnisged with that build .
is this sdcard prob after all thiss trouble?
herefor (last week)device did see my sd card

ikkeenjij36 said:
used panasonic all you said but device says still can't mount sd card and i'm not in position to put in ohter sd card all shop's are closed here?
can still flash the old rom with darkforces method
and my sd card is recosnisged with that build .
is this sdcard prob after all thiss trouble?
herefor (last week)device did see my sd card
Click to expand...
Click to collapse
Hi,
I read somewhere that when the sd card cannot be recognised,it might be something to do with the VERSION of recovery you have.
Try to use the toolkit to DOWNGRADE recovery and see if that is successful...

after working sevral days i need help

hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
edit:i tried to restore and it says md5 mismatch
thanx

If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.

Khan_ said:
hello guys i had NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7) on my htc hd2 then i wanted to use this rom
so after installing MAGLDR113 and CWR 5.0.2.6 i rebooted and created partition then i pressed mount and storage and pressed mount usb storage copied the the file name "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7).zip" onto sd card and when i pressed choose zip from sd card and tried to install this it gave me error
"finding package, opening package, cant open /sdcard/"romname", installation aborted"
Click to expand...
Click to collapse
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.
so i seaarched and i rename to update.zip still got the same error ,if i change it to "update" only it does not show up.
so somwhere i read to extract thee files and place in sdcard root and choos boot from ad sd , so i did that ,it loaded htc hd2 image on bottom it says NDT series by langthang" and it is stuck there not moving forward...
Click to expand...
Click to collapse
its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.
i know i am doing something wrong i searched alot i tried to get back on "NexusHD2-Gingerbread_V3.2a_NAND_(Android-2.3.7)" it also gives the same error saying cant open bla bla i downloaded winmo
Click to expand...
Click to collapse
which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshooting
went into bootloader tried to install winmo but it gets stuck on 0% please help i read tons of posts i searched alot after doing everything i came to get help from you
Click to expand...
Click to collapse
stuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
edit:i tried to restore and it says md5 mismatch
Click to expand...
Click to collapse
theres a few threads about fixing md5 sums, read them yet?
thanx
Click to expand...
Click to collapse
i would suspect a dodgy sd card, but thats only a first general guess based on little information.

icke said:
If you mounted sd card in CWM do not press back button!
Sd is still mounted...so press call button or restart your phone, boot into CWM and try again to flash your rom.
Click to expand...
Click to collapse
did that no luck
samsamuel said:
corrupted download? interrupted transfer? always try copying across / downloading it again before you do anything else.its a nand build so not sure it would cope with simply unpacking onto the sd card, i 'think' (i dont know, no clue about teh technicals) you have to alter something in teh init, but thats why i expect it isnt loading.which one? full filename please, also the version hd2 (regular, tmous) and its source, bought unlocked? branded from a provider? details are king when troubleshootingstuck at 0% usually points to the wrong rom for your phone, and/or no hspl installed. look in bootloader, whats teh spl line say?
theres a few threads about fixing md5 sums, read them yet?
i would suspect a dodgy sd card, but thats only a first general guess based on little information.
Click to expand...
Click to collapse
ya as i said i did alot of search with no luck .
so finally i just installed
Code:
XXX.jayceooi.com/2011/01/14/how-to-install-windows-phone-7-on-htc-hd2-video/
but srsly i dont like but atleast it ws very simple to install,is there any way to install nand android just like this cuz i didnt find any
again thanx for replies guys

let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully

I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium

It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun

gdsbalaji said:
let me know if you still want to install nand android...i can guide you..and possibly fight with you till u install it successfully
Click to expand...
Click to collapse
i really appreciate that bro ...yeah i really want android back on my hd2
kylew1212 said:
I have written a guide that makes it super easy to install. If you still have problems just post in my thread or pm me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
i ll look into it definitely.
Taco123 said:
It looks like a bad download.
But at first, check if your HSPL has version 2.08, and flash it, if it is other version.
Then check Radio version (2.15.50.14) and flash it, if it is other verion.
Do task29 and install afterwards magldr and recovery with right size for your rom.
Partiion you SD-Card like it should and wipe all you find (partition will delete all your data on sd-card).
Copy downloadet zip to sd card and install it.
These are only basic steps. More details you find here:
http://forum.xda-developers.com/showthread.php?t=905841
Have fun
Click to expand...
Click to collapse
HSPL version is 2.08 i dont know about that radio version but i tried installing radio from provided in "easyandroid by kevin" and it also got stuck on 0%.did task 29 installed magdlr 1.13 and CWR 3.2.0.0 (also tried the latest version of CWR 5.0.2.8 i think) formated sd card did a partition as well mounted usb storage from ad recovery rebooted it the again went to ad recovery and pressed choose from sd card it goves me that error "installation aborted.
just a quick question i have these roms on my computer
http://forum.xda-developers.com/showthread.php?t=905060
http://forum.xda-developers.com/showthread.php?t=1013852
what should be the neccesary steps to install these i read the both developers guides but there is something that i am missing...
i hv DFT windows 7 installed on my hd2 so what should i do to get android back.
what is Clk i did not installed that in my view was clk is same thing like magdlr so i skipped installing that n i had (hspl 2.08,magdlr 1.13 and cwr 3.2.0.0) only
is this the problem causing?
regards

here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg

gdsbalaji said:
here are steps for ya
files you need: (if you need pm me)
-task29
-Radio Leo 2.15.50.14
-DFT_LEO_MAGLDR113_DAF
-Recovery_150M_system_5M_cache
-rom zip (dont alter/extract zip if you done know wat to do with this)
do these: (from your current WP7 rom)
-restart device
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-do a task 29
-get into bootloader again
-plug usb...hd2 should say 'USB'
-install radio by running 'CustomRUU.exe'
-get into tricolor bootloader
-plug usb...hd2 should say 'USB'
-run DAF.exe for installing MAGLDR
-reboot
-get into MAGLDR by holing power/end key while booting
-go to 'usb flasher' in the menu and press green/call button
-plug usb...hd2 should say 'USB'
-wait till it say 'wait usb...usb'
-get into your recovery folder
-run daf.exe
-reboot post completion
-get into MAGLDR by holing power/end key while booting
-get into ad-recovery
-get into mount storage
-activate usb mass storage
-now put the rom zip files into sd card
-press power to get back to recovery menu
-select install rom from sdcard
-choose rom file
-select install
this should typically install nandroid into your hd2...
if you face any issues, share the step and the error scenario/msg
Click to expand...
Click to collapse
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files again(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.

Khan_ said:
i used to get stuck on 0% while installing radio...i am at office so i downloaded these files(image attatched) .i will try to install when i get back to home with your instruction given and will post what ever result i get.
Click to expand...
Click to collapse
good luck.

gdsbalaji said:
good luck.
Click to expand...
Click to collapse
everything worked smooth untill the final test
i mounted usb storage copied HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR clicked power button selected install zip from sd card then selected choose zip from sd card selected HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR and selected Yes .
it says
installing :/sdcard/HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
Finding update package
Opening Update Package
E:cant open /sdcard.HD2_NDT_GINGER_2.3.7_CM7.2_BASED_V35.0_MAGLDR
(bad)
installation aborted
same old issue what i was getting.
edit:it was the sd card ...i changed the sd card copied rom and installed it smoothly thanks a ton bud i really appreciate the help u gave .God bless ya

Glad it worked dude...hv fun
Sent from my HTC HD2 using XDA App

[Q] HOW TO flash WP7 after having Android on my HD2

HOW TO flash WP7 after having Android on my HD2

1. Task29 (and format SD Card too)
2. Install Radio
3. Install a WM6.5 ROM.
Then, checkout xboxmod instructions:
----How to Update: ----
-1st it's recommended to flash an old rom wm 6.5 and let it boot entirely
-Format your SD card too
-Flash magldr 1.13
-Enable 24MB extra memory in Magldr services
-Delete MBR of SDcard in Magldr services
-Flash the rom with DWI & Set a correct time & date.
-Install the lastest version of zune client.
- You can Run the zune update process like a real WP7 device & go to build 8107.
-but it's better to look the cab thread and install os update via cab this is really faster than zune.
Update Cab tweak thread

Flash WP7 after Android
It's pretty simple I've done this several timez cuz android sukz on my HD2 -.-
You need to wipe all your data on you Flash memory of yuor Phone. So Wipe (Task29) all your data, you can do this with the HD2 Toolkit From Here. After you have done this make shure you've got the correct Radio for WP7. Now you go into bootloader (power+vol down) and install MAGLDR (i guess you know how to install this). When you Phone reboots into MAGLDR select Services->UseLast24MB NAND [something like that] and after that choose USB Flasher from MAGLDR Main menue to flash the WP7 ROM you have choosen. I also recommend you to clean up your SD Card before flashing (delete all patitions and data)
I hope it helped you out. If you have further questions let me know i try to reply.

i recommended you Pdamatejam ROM, not Yuki....
Yuki ROM lock SD cards (dont forget this)... Pdamtejam also can update with CAB's files
http://forum.xda-developers.com/showthread.php?t=1356833
look in my signature... you have all there.... also read tutorial.... you find all links which you need (task29, MAGLDR, ROM, radio's)

neji4ever said:
It's pretty simple I've done this several timez cuz android sukz on my HD2 -.-
You need to wipe all your data on you Flash memory of yuor Phone. So Wipe (Task29) all your data, you can do this with the HD2 Toolkit From Here. After you have done this make shure you've got the correct Radio for WP7. Now you go into bootloader (power+vol down) and install MAGLDR (i guess you know how to install this). When you Phone reboots into MAGLDR select Services->UseLast24MB NAND [something like that] and after that choose USB Flasher from MAGLDR Main menue to flash the WP7 ROM you have choosen. I also recommend you to clean up your SD Card before flashing (delete all patitions and data)
I hope it helped you out. If you have further questions let me know i try to reply.
Click to expand...
Click to collapse
Whats the best wp7 rom out there?

Constant errors installing WP 7

I have tried almost everything to get wp7 roms to work Format sd card Class 10 8meg tried 2 different ones.
Task 29 - install magldr - 10 services (5clearsd mbr then 4 uselast24 nand) i have tried it both ways.
Task 29 -install wp 6.5 install magldr - 10 services (5clearsd mbr then 4 uselast24 nand)
I have also tried it this way An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
Hopefully someone has some suggestions I have tried several roms
I am using TMous hd2 (us hd2)

hmmm it could be the procedure or the SD card?
this is what i did & it ran smoothly
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.

mengfei said:
hmmm it could be the procedure or the SD card?
this is what i did & it ran smoothly
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
Click to expand...
Click to collapse
I think i am going to have to get a class 4 i have tried 2 different class 10 the only class 4 i have is locked from a previous rom (yuki rom) cannot get that one unlocked so i will have to go buy a new one any brand preferences.

try this way :
1, task29
2 falsh any rom of wm6.5
3,flash maglr 1.13 or higher
4, enable the last 24M of memory with the 8 option of maglr
5. flash wp7

wollice said:
try this way :
1, task29
2 falsh any rom of wm6.5
3,flash maglr 1.13 or higher
4, enable the last 24M of memory with the 8 option of maglr
5. flash wp7
Click to expand...
Click to collapse
i do not see the option to use the last 24m with option 8 in magldr i only see it in option 10 services

oler69 said:
it is in fact in option 10
Click to expand...
Click to collapse
i still get the errors no matter what i have done several ways

mengfei said:
hmmm it could be the procedure or the SD card?
this is what i did & it ran smoothly
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Clear SD MBR
- uselast24NAND
- USB Flaser
- Flash WP
- Done!
if still the error persist try replacing the SD card coz mine had a problem with Trancend's 16gig card.
Click to expand...
Click to collapse
I was finally able to install WP7 thanks to you

Errors while trying to flash new ROM on my HD2 - [SOLVED!]

Hello everyone,
i have a problem setting up wp7/nativesd android dual booting on my HD2.
I've read all the guides and troubleshots but I don't seem to bypass my errors im getting.
So let me explain things, I own HD2 with 2.08 hspl and 2.15 radio.
My procedure:
A.)
1. Task29
2. install MAGLDR 1.13
3. (optional) repartition MAGLDR to system 300mb/45mb cache
B.)
1. (optional) services/uselast24nand and clearSD mbr
2. (optional) AD Recovery - working!
3. USB Flasher mode
4. Start DWI.exe (tried some: .., Pdaimatejam Rom Wp7.8 OS 7.10.8835.35 v8.5, DFT Ultrafruit, H2O2)
Result: Procedure B/4 always fails with an error while flashing partition 4:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
I get that error whatever I do. I repeat the steps from my Procedure A/1 and onwards with different (option) points written above with no success.
Can anyone please help me? I am desperate, seriously, already changed my HD2's motherboard and upper board for nothing - same problem persists.
Thank you for trying and reading!
PS.:
I've tried the above procedure with 3 SD cards, Samsung 16gb class 6, Transcend 32gb class 4, Kingston 8gb class 10. No luck

did you forget use last24nand in magldr? this not optional... this is important... be sure you confirm this step with green buttom
also check did you have activesync (XP) or WMDC (Win7/8, Vista) installed
also did you try flash WP without repartition of NAND? maybe this is problem

I did try it several times. As I said, those (optionals) are just the points where I tried to change whole procedure so I would make it work but I didn't. I DID try that 24mb nand 90% of the time. Currently I reflashed stock wm6.5 back and starting from begining. Will report to you.

It does work now! I think I did a mistake after I installed HSPL i always did task29 thank you for your help guys!
Task29 before instaling wp7 is not smart hehe