Related
OK SO .. This is like my 3rd or 4th thread.... Apparently no one answers. Again i have read the noob thread on rom flashing and hdsplpslr or whatever the hell that is. Can someone please step by step tell me what to do to get rid of this horrid slowness and freezing of my htc hd2. Im seriously ready to call up TMO and tell them to take the phone back and go with sprint wait for the evo to come out. I really have no clue how to do this uhh Rom flashing even after reading that noob thread.. Anyone?
I have not flashed a winmo rom in a long time(been using an android phone till I got the hd2).
If you just want to fix the slowness and crashing turn off sense. That is what caused crashing on both of my HD2 phones and the replacement ones I received last week. If you want a nice looking gui install spb shell. It crashes on mine, but not on the other one. Good luck
aeagleboi22 said:
Im seriously ready to call up TMO and tell them to take the phone back
Click to expand...
Click to collapse
If you don't want to read/can't understand the instructions/are not willing to spend a couple of weeks tweaking your device, just do that. Will be easier for us all, and you too
wow
thanks for Obvious....
kilrah said:
If you don't want to read/can't understand the instructions/are not willing to spend a couple of weeks tweaking your device, just do that. Will be easier for us all, and you too
Click to expand...
Click to collapse
Agreed with Kilrah. Look man, as you can see I just pretty much joined this and didnt even know what flashing was until I got my HD2. If you honestly read the n00b guides you cant go wrong. I dont see what you could be missing? It took me a couple days to line everything up and be confident in what I was doing but the main thing of importance is the HPSL part. After that its honestly just downloading, hooking up and letting the program do itself. So as kilrah said, if n00b guides, youtube videos, etc. arent cutting it for you, I would suggest taking it back.
Im guessing no one has answered due to the fact that: What more can be said that an in depth n00b guide hasnt ?????
Good luck.
I will repost what I posted in your other thread...
"Can you tell what ROM/Radio/Manila version you are currently on?
(Go to settings/about phone/software information)"
If you can't be bothered to answer me, I won't bother trying to help you.
I'll help as best I can: (the links in this thread assume that you are using the European version of the HD2 as you posted this thread in the Euro Version.)
Step 1: Download HSPL2_RUN.zip for the European Leo here: http://forum.xda-developers.com/showthread.php?t=611433
Step 2: Turn on phone while holding the the volume down key, the phone should boot into an odd looking tri-color screen
Step 3: Plug phone into USB port on computer.
Step 4: Extract the HSPL2_RUN.zip file to a folder.
Step 5: Open the folder you extracted the file to and run HSPL2_RUN.exe.
Step 6: Follow the on screen instructions until finished, it should say something along the lines of "successfully done."
Step 7: If you are immediately going to download and change ROM leave the phone in bootloader and download compatible ROM of choice: from here (note this thread again assumes your using a European or Asian LEO because that is the section you posted this thread in.) http://forum.xda-developers.com/forumdisplay.php?f=534
Step 8: If you need to (note: and only if you need to but you shouldn't) update your radio please go here and download it: http://forum.xda-developers.com/showthread.php?t=611787
Step 9: Open the folder (if it's a .zip extract it) of the ROM you downloaded and run CustomRUU.exe or whatever similarly named file is present.
Step 10: Follow the onscreen instructions.
Step 11: If administered correctly the phone should automatically restart and presto new ROM.
PLEASE NOTE THE FOLLOWING:
I am not responsible for what happens to your phone. BY FOLLOWING THIS GUIDE YOU ADMIT THAT YOU ARE RESPONSIBLE FOR YOUR OWN ACTIONS. I have to put this for all of those people who will mess it up by not following it, then blame me. Good luck and enjoy whatever ROM you decide to use.
~Jasecloud4
P.S. If anybody has anything to add to this post please let me know and I will be happy to add it for the OP's sake.
jasecloud4 said:
I'll help as best I can: (the links in this thread assume that you are using the European version of the HD2 as you posted this thread in the Euro Version.)
Step 1: Download HSPL2_RUN.zip for the European Leo here: http://forum.xda-developers.com/showthread.php?t=611433
Step 2: Turn on phone while holding the the volume down key, the phone should boot into an odd looking tri-color screen
Step 3: Plug phone into USB port on computer.
Step 4: Extract the HSPL2_RUN.zip file to a folder.
Step 5: Open the folder you extracted the file to and run HSPL2_RUN.exe.
Step 6: Follow the on screen instructions until finished, it should say something along the lines of "successfully done."
Step 7: If you are immediately going to download and change ROM leave the phone in bootloader and download compatible ROM of choice: from here (note this thread again assumes your using a European or Asian LEO because that is the section you posted this thread in.) http://forum.xda-developers.com/forumdisplay.php?f=534
Step 8: If you need to (note: and only if you need to but you shouldn't) update your radio please go here and download it: http://forum.xda-developers.com/showthread.php?t=611787
Step 9: Open the folder (if it's a .zip extract it) of the ROM you downloaded and run CustomRUU.exe or whatever similarly named file is present.
Step 10: Follow the onscreen instructions.
Step 11: If administered correctly the phone should automatically restart and presto new ROM.
PLEASE NOTE THE FOLLOWING:
I am not responsible for what happens to your phone. BY FOLLOWING THIS GUIDE YOU ADMIT THAT YOU ARE RESPONSIBLE FOR YOUR OWN ACTIONS. I have to put this for all of those people who will mess it up by not following it, then blame me. Good luck and enjoy whatever ROM you decide to use.
~Jasecloud4
P.S. If anybody has anything to add to this post please let me know and I will be happy to add it for the OP's sake.
Click to expand...
Click to collapse
remember to backup contacts etc
ok lastly
Jase that actually was a little more in depth thanks dude... uhhh, so i guess htis is all i need to stop the slowness speed up performance and crashing of the phone then? About the radio.. is that like a FM AM radio? do i need to worry about that? and how do i get out of the tri color mode screen when its done
aeagleboi22 said:
Jase that actually was a little more in depth thanks dude... uhhh, so i guess htis is all i need to stop the slowness speed up performance and crashing of the phone then? About the radio.. is that like a FM AM radio? do i need to worry about that? and how do i get out of the tri color mode screen when its done
Click to expand...
Click to collapse
The radio is a software that's installed on the phone which controls how the antenna operates. This means that you can get better signal/call quality/stability and this all links into battery life aswell.
Different radios will give you different results based on the location you are in.
You need to flash an appropriate radio (specified by the ROM you want to download) as some ROMs have settings which apply only to a specific radio (for example the 576MB RAM patch)
To get out of the tri colour screen just press the little red button just below the battery.
Remember to perform a task 29 before flashing to format your device.
cgrec92 said:
The radio is a software that's installed on the phone which controls how the antenna operates. This means that you can get better signal/call quality/stability and this all links into battery life aswell.
Different radios will give you different results based on the location you are in.
You need to flash an appropriate radio (specified by the ROM you want to download) as some ROMs have settings which apply only to a specific radio (for example the 576MB RAM patch)
To get out of the tri colour screen just press the little red button just below the battery.
Remember to perform a task 29 before flashing to format your device.
Click to expand...
Click to collapse
Good catch on the task 29 and radio explanation. Also good call on the contacts. Save your contacts to SIM or back em up. On getting out of the tricolor bootloader, the red button or just pulling and reinserting the battery will work (although the button is easier lol.)
When it comes to radio, the ROM chef will USUALLY tell you what radio he/she is using...hint at the usually part. If the ROM thread doesn't say, ask the dev they'll usually tell ya.
~Jasecloud4
aeagleboi22 said:
OK SO .. This is like my 3rd or 4th thread.... Apparently no one answers. Again i have read the noob thread on rom flashing and hdsplpslr or whatever the hell that is. Can someone please step by step tell me what to do to get rid of this horrid slowness and freezing of my htc hd2. Im seriously ready to call up TMO and tell them to take the phone back and go with sprint wait for the evo to come out. I really have no clue how to do this uhh Rom flashing even after reading that noob thread.. Anyone?
Click to expand...
Click to collapse
All the answer info given to your original question is readily accessible from the search function.
And the snappy title "will someone answer" will put more people off than make them interested in assisting.
Theres a learning curve involved in the getting to know the HD2 and its steep at times. You will have to decide whether its too steep for you.
THIS IS A THREAD FROM A NOOB FOR NOOBS!(I'm soooo sorry!)
I know I will be hated for asking this and reading all the threads, it appears most people here are light years ahead of me.
Anyway, I have been watching this site eagerly for Android for my HD2 over the last 6 months and it appears to me that this :
http://forum.xda-developers.com/showthread.php?t=795914
appears to be by far the best option available right now.
So I have downloaded :
data512.7z
data.7z
MDJ_FroYo_HD_v._4.1_MDJ_S7.3HD.7z
I believe this has to go onto my SD Card, but everyones talk is too fast for me (I'm so sorry!)
Do I need to change anything else before I do this?
For example, is the ROM required to be changed, if so, how?
If not, do I just create a file callled "Android" on the root of my SD card and extract all the files from the three downloaded files into this "Android" folder?
I'm really sorry, Winmo6.5 is destroying me and my patience for an Android HD2 is far richer than my wallet, your help is appreciated a million times over.
hey ill help u if u need it. i kno how u feel to be lost in this jungle. i bought the hd2 in the beginning thinkin it was android, so when i found the forum for android port and was excited. tell me what u need
mods please move this thread to the general section!
step 1: read this: link
step 2: download and run this first . its called HSPL3.
step 3: second download and run Leo_RADIO_2.15.50.14 from here
step 4: download and run this. its call VBNROM. it will replace your winmo rom.
step 5: download and run 7zip from here
step 6: extract MDJ_FroYo_HD_v._4.1_MDJ_S7.3HD.7z and data.7z to your desktop
step 7: move the data.img file from the data folder to the android folder in the MDJ_FroYo_HD_v._4.1_MDJ_S7.3HD folder.
step 8: press the start key on your phone and press wm5storage, then activate.
step 9: copy the android folder to your sdcard. it will take a looooong time.
step 10: press deactivate.
step 11: press the start button on your phone. then press EBL 2.0.
step 12: on the right side under the android logo, press autoboot and press the word \android
step 13: donate to m-deejay
step 14: donate to - Cotulla and the gang. someone please add their links, i can not find them.
the only reason i replied to this thread, it being a question that has been asked way to many times, was to shoot these guys some hard earned cash. be respectful.
also i recommend downloading the 1gd data for faster boot
first, a really big thank you!
(and I think there may be others that thank you for this "idiots guide")
Am I right in saying that the FROYO build 4.1 that I am attempting to go forward with is the most complete so far?
(I've been at work and will have to try this in the morning!)
What is the "1gb data for faster boot"?
I have downloaded :
data512.7z
data.7z
I guess I use one or the other (is that right?)
Is there another?
My HD2 has 512MB flash size!
Again, thank you for your help.
**edit**
does replacing my Winmo ROM render Winmo useless?
hkcharlie said:
(and I think there may be others that thank you for this "idiots guide")
Am I right in saying that the FROYO build 4.1 that I am attempting to go forward with is the most complete so far?
(I've been at work and will have to try this in the morning!)
What is the "1gb data for faster boot"?
I have downloaded :
data512.7z
data.7z
I guess I use one or the other (is that right?)
Is there another?
My HD2 has 512MB flash size!
Again, thank you for your help.
Click to expand...
Click to collapse
You can use either, the data512.7z will give you 512MB of ROM in which programs and system stuff are placed, the other will give you 1GB of data space.
You can choose either, regardless of which HD2 you have.
I would say don't bother with the data.zip files, I always let android creat it's own one. It takes more time but (it is my opinion) I think it is safer.
Also, on exceller, select autoboot on 3 seconds.
I am running the build you want and it is really good.
Oh yeah, to be on the safe side, format your sd card and don't worry, firt boot can take 15 minutes
I thought this would be helpful, but really it's overkill and as a result, again confusing.
SORRY
Your step 1 says to "read this" which is whole bunch of other steps. Do you want me to do those steps or read those steps? Which are also confusing.
like
Your step 2 says:: download and run this first . its called HSPL3.
and links to a page where someone is talking complete tech talk and doesn't tell me how to run it.
Unzip it ? Put it in another folder? What?
drag and drop from your pc to your device?
run it?
Same with all the ROMS and Android builds, nothing is clear.
Run this, install that.
Sure, HOW!
I unzip some of this stuff to put into a folder and there are duplicate files in them, so they are impossible to COMPLETELY unzip.
I'm sorry, I've been looking forward to these few hours I have in my day to do this and now I'm here, I'm still none them wiser.
GUTTED !
hkcharlie said:
I thought this would be helpful, but really it's overkill and as a result, again confusing.
SORRY
Your step 1 says to "read this" which is whole bunch of other steps. Do you want me to do those steps or read those steps? Which are also confusing.
like
Your step 2 says:: download and run this first . its called HSPL3.
and links to a page where someone is talking complete tech talk and doesn't tell me how to run it.
Unzip it ? Put it in another folder? What?
drag and drop from your pc to your device?
run it?
Same with all the ROMS and Android builds, nothing is clear.
Run this, install that.
Sure, HOW!
I unzip some of this stuff to put into a folder and there are duplicate files in them, so they are impossible to COMPLETELY unzip.
I'm sorry, I've been looking forward to these few hours I have in my day to do this and now I'm here, I'm still none them wiser.
GUTTED !
Click to expand...
Click to collapse
tell ya what just go to youtube and search for installing android on hd2
should cut the confusion out
good luck
hkcharlie said:
I thought this would be helpful, but really it's overkill and as a result, again confusing.
SORRY
Your step 1 says to "read this" which is whole bunch of other steps. Do you want me to do those steps or read those steps? Which are also confusing.
like
Your step 2 says:: download and run this first . its called HSPL3.
and links to a page where someone is talking complete tech talk and doesn't tell me how to run it.
Unzip it ? Put it in another folder? What?
drag and drop from your pc to your device?
run it?
Same with all the ROMS and Android builds, nothing is clear.
Run this, install that.
Sure, HOW!
I unzip some of this stuff to put into a folder and there are duplicate files in them, so they are impossible to COMPLETELY unzip.
I'm sorry, I've been looking forward to these few hours I have in my day to do this and now I'm here, I'm still none them wiser.
GUTTED !
Click to expand...
Click to collapse
Or you can do what I did in the start:
1. Copy everything from SD card to a safe location on your computer
2. format SD-card
3. Unzip you Android choise on your computer.
4. Move/copy the Android folder to your SD-Card
5. Find your file-explorer on your HD2 and start the files that are mentioned on the site (CLRCAD and HARET)
6. now it should boot up.
7. (maybe needed) I found that when i was using a old Original ROM-update for my HD2 none of the Android builds would start up.
If this is you... check HTC.com for the newest ROM-update and update your phone. think the ROM version should be 3.14 or something.
8. And If you love Android as the rest of us... you can install the auto-loader as mentioned earlier.
I think I'm just between you and the other guys. so I hope this is helpful.
Oh, btw. that build you have downloaded is good. I have not yet had this good luck with the same build just 4.4 version. Waiting for a new release.
Best Regards
When you finally get it figured out you are going to be kicking yourself when you realize how easy it is to put android on your hd2 please post something saying WOW this is as easy as putting a new song or picture on my phone lol good luck I am confident you will have it down patt and be trying every build in the near future
Hi all,
i've just done all these steps and it was pretty easy and understandable
i think i will post a clearer guild for you guys
step 1: read this: link ( don't read this cause it just cause confusion)
step 2: download and run this first . its called HSPL3. ( connect your device with the computer, select auto sync on the device, run HSPL3_PKG, select 2.08 hSLR, cause 2.08.0000 doesnt work for me T.T)
step 3: second download and run Leo_RADIO_2.15.50.14 from here ( after restarting your device, unplug and re plug the usb cable, select autosync on your phone. hit CustomRUU in the radio leo folder. wait a moment and it should do the job)
step 4: download and run this. its call VBNROM. it will replace your winmo rom. ( do the same thing like step 3, but with CustomRUU in VBNROM folder)
step 5: download and run 7zip from here
step 6: extract MDJ_FroYo_HD_v._4.1_MDJ_S7.3HD.7z and data.7z to your desktop
step 7: move the data.img file from the data folder to the android folder in the MDJ_FroYo_HD_v._4.1_MDJ_S7.3HD folder.
step 8: press the start key on your phone and press wm5storage, then activate.( this step is on your phone, hit the start/ wm5storge, look at the bottom left corner you will see Activate button)
step 9: copy the android folder to your sdcard. it will take a looooong time.( open my computer, you should see your sdcard there, i would format it, and then copy the android folder to the sdcard)
step 10: press deactivate.
step 11: press the start button on your phone. then press EBL 2.0.
step 12: on the right side under the android logo, press autoboot and press the word \android
step 13: donate to m-deejay
step 14: donate to - Cotulla and the gang. someone please add their links, i can not find them.
Hope this will help
TekniskM said:
Oh, btw. that build you have downloaded is good. I have not yet had this good luck with the same build just 4.4 version. Waiting for a new release.
Click to expand...
Click to collapse
Agreed. v4.4 seems to have worse battery drain than v4.3.
I tried v4.4 with MDJ 8.0 kernel, battery life is better but LED doesn't work
singcheng said:
Agreed. v4.4 seems to have worse battery drain than v4.3.
I tried v4.4 with MDJ 8.0 kernel, battery life is better but LED doesn't work
Click to expand...
Click to collapse
use this file
just copy to your android folder in the sd card and reboot
Hello everyone I have just bought a new Samsung focus rev 1.3 and I migrated from android and I wanted you all to guide me abut unlocking rom., magdlr , side loading apps etc.. right now am on stock mango.......... plz help me.... thankd
Sent from my MB525 using XDA
devilthehellraiser said:
Hello everyone I have just bought a new Samsung focus rev 1.3 and I migrated from android and I wanted you all to guide me abut unlocking rom., magdlr , side loading apps etc.. right now am on stock mango.......... plz help me.... thankd
Sent from my MB525 using XDA
Click to expand...
Click to collapse
1. Stock roms. Custom ROMs: DFT+Magldr, mi7rom, CleanDFT
2. Dev unlocking through WindowsBreak project
3. To deploy XAPs you need Winco's mini WP7 SDK and Winco's deployer wXapAssistant
4. Deploy these 2 apps immediately: Samsung tools (to prevent relock) and WP7 Root tools (file explorer, registry editor etc)
I also suggest you read this thread, it's a bit oudated but it contains all the needed tools today.
This is what you need to start with, good luck!
Nice, concise post, EnderPsp.
EnderPsp said:
1. Stock roms. Custom ROMs: DFT+Magldr, mi7rom, CleanDFT
2. Dev unlocking through WindowsBreak project
3. To deploy XAPs you need Winco's mini WP7 SDK and Winco's deployer wXapAssistant
4. Deploy these 2 apps immediately: Samsung tools (to prevent relock) and WP7 Root tools (file explorer, registry editor etc)
I also suggest you read this thread, it's a bit oudated but it contains all the needed tools today.
This is what you need to start with, good luck!
Click to expand...
Click to collapse
Thanks for your concise email and the wiki.
Is there any step by step guide for first time flashing? It seems I am stuck with a ver1.3 demo mode phone and need to flash it to fix it. Any help and advise is highly appreciated.
Thanks.
cyclops13 said:
Thanks for your concise email and the wiki.
Is there any step by step guide for first time flashing? It seems I am stuck with a ver1.3 demo mode phone and need to flash it to fix it. Any help and advise is highly appreciated.
Thanks.
Click to expand...
Click to collapse
Sure, read here (part of step 1 of my Noob friendly unlock post)
EnderPsp said:
Sure, read here (part of step 1 of my Noob friendly unlock post)
Click to expand...
Click to collapse
Thanks! This steps seem simple enough for me to follow.
I am in a dilemma, help me out guys. I bought a used phone for $90 and its in a pretty good condition overall except for the demo mode issue. I have the option of opting for a replacement, but I am not sure whether the replacement would be as good as this one.
The phone is scratch-less and cosmetically in pretty good shape. I also checked the diagnostic menu and there was no issue found to my noobie eyes. The usual burn in problem with demo units is also not present. I could not check the calling features as its in demo mode. Is there anything else I should look for?
So what should I do? Keep this and flash with a stock ROM (which I am sure inputs by you all will definitely get me through) or I should just go ahead and take a replacement?
EDIT: Any inputs guys???
EnderPsp said:
Sure, read here (part of step 1 of my Noob friendly unlock post)
Click to expand...
Click to collapse
So I have decided to keep this phone and flash it to a stock ROM.
I was going through the posts referred by you (very helpful) and can figure that the bootloader is working fine. Will start the flashing when I get home from work.
One of the points mentioned in the tutorial says that the battery should be 80% charged before starting with the flashing process - which makes sense. BUT, I am having some issues here. The demo mode seems to be a battery hog, so even if I have plugged the phone to the charger, the battery is getting charged really slow (probably the battery is bad as well). Its been a few hours since I have plugged it in and its still probably at 20% and the phone is getting pretty warm at the back and the front. Is this going to be a problem???
cyclops13 said:
So I have decided to keep this phone and flash it to a stock ROM.
I was going through the posts referred by you (very helpful) and can figure that the bootloader is working fine. Will start the flashing when I get home from work.
One of the points mentioned in the tutorial says that the battery should be 80% charged before starting with the flashing process - which makes sense. BUT, I am having some issues here. The demo mode seems to be a battery hog, so even if I have plugged the phone to the charger, the battery is getting charged really slow (probably the battery is bad as well). Its been a few hours since I have plugged it in and its still probably at 20% and the phone is getting pretty warm at the back and the front. Is this going to be a problem???
Click to expand...
Click to collapse
Flashing implies some risk, so having more battery definitely helps. By my experience, 40% is enough but I recommended 80% for the general case (to cover all possibilities). But considering your battery is slow charging, I would do 2 things to charge faster:
- set airplane mode
- turn screen off
So when you reach 40% you should be fine for flashing stock ROM. But I don't know all the particular details so you need to consider all. Normally, flashing a stock ROM takes about 10 mins, so it doesn't require a lot of battery.
And just to be clear, for demo phones I first recommend you return the phone, since these aren't normally sold to users. But that is your choice and again, I don't know all the particularities (for demo phones) or even if flashing a stock rom actually works, for that matter.
EnderPsp said:
Flashing implies some risk, so having more battery definitely helps. By my experience, 40% is enough but I recommended 80% for the general case (to cover all possibilities). But considering your battery is slow charging, I would do 2 things to charge faster:
- set airplane mode
- turn screen off
So when you reach 40% you should be fine for flashing stock ROM. But I don't know all the particular details so you need to consider all. Normally, flashing a stock ROM takes about 10 mins, so it doesn't require a lot of battery.
And just to be clear, for demo phones I first recommend you return the phone, since these aren't normally sold to users. But that is your choice and again, I don't know all the particularities (for demo phones) or even if flashing a stock rom actually works, for that matter.
Click to expand...
Click to collapse
SUCCESS!!! Thank you guys!
All the posts were really helpful. Now I can confirm that the demo version phones can be fixed by this method!
Registry Editor
Guys, I see a lot posts about editing the registry entries to tweak stuff. I need to change my default live ID and found a suggested way to change that through registry edit. BUT how do I do it? I am not having enough posts, so cant post in the dev threads.
My bad, the answer was right in this thread! I gotta windowbreak and then install WP7Roottools to edit the registry!
EnderPsp said:
1. Stock roms. Custom ROMs: DFT+Magldr, mi7rom, CleanDFT
2. Dev unlocking through WindowsBreak project
3. To deploy XAPs you need Winco's mini WP7 SDK and Winco's deployer wXapAssistant
4. Deploy these 2 apps immediately: Samsung tools (to prevent relock) and WP7 Root tools (file explorer, registry editor etc)
I also suggest you read this thread, it's a bit oudated but it contains all the needed tools today.
This is what you need to start with, good luck!
Click to expand...
Click to collapse
Did everything till step 3, but at 4 not able to proceed. No matter what I do, it wont detect that my device is connected. Please help..
cyclops13 said:
Did everything till step 3, but at 4 not able to proceed. No matter what I do, it wont detect that my device is connected. Please help..
Click to expand...
Click to collapse
Kill every program you've opened. Skype messes up the connection. If you're able to sync in Zune, it should work. Also
- don't close Zune while you do that
- make sure you're synced fully in Zune, not in Guest mode
EnderPsp said:
Kill every program you've opened. Skype messes up the connection. If you're able to sync in Zune, it should work. Also
- don't close Zune while you do that
- make sure you're synced fully in Zune, not in Guest mode
Click to expand...
Click to collapse
Tried doing it afresh as well, did a hard reset and then windowbreak - did not work. I did connect to Zune but did not do a complete sync, will do that tonight and check.
It works! Thanks again EnderPsp!
Glad it's sorted for you in the end!
cyclops13 said:
Did everything till step 3, but at 4 not able to proceed. No matter what I do, it wont detect that my device is connected. Please help..
Click to expand...
Click to collapse
EnderPsp said:
Kill every program you've opened. Skype messes up the connection. If you're able to sync in Zune, it should work. Also
- don't close Zune while you do that
- make sure you're synced fully in Zune, not in Guest mode
Click to expand...
Click to collapse
cyclops13 said:
Tried doing it afresh as well, did a hard reset and then windowbreak - did not work. I did connect to Zune but did not do a complete sync, will do that tonight and check.
Click to expand...
Click to collapse
cyclops13 said:
It works! Thanks again EnderPsp!
Click to expand...
Click to collapse
Help! I am stuck again.. No matter what, the device shows disconnected! I just downloaded the Nokia Drive XAP and trying to install it since more than 2 hours. Reinstalled everything, still wont work! Its so frustrating!
cyclops13 said:
Help! I am stuck again.. No matter what, the device shows disconnected! I just downloaded the Nokia Drive XAP and trying to install it since more than 2 hours. Reinstalled everything, still wont work! Its so frustrating!
Click to expand...
Click to collapse
Can you please post your PDA/Phone? (*#1234# in Diagnosis)
EnderPsp said:
Can you please post your PDA/Phone? (*#1234# in Diagnosis)
Click to expand...
Click to collapse
PDA: i917UCKH1
Phone: i917UCKH1
Sorry for the delayed response, I was out for the weekend. Any thoughts on what would go wrong? I still have the WP7 Root Tools installed and it seems to be working fine!
cyclops13 said:
PDA: i917UCKH1
Phone: i917UCKH1
Sorry for the delayed response, I was out for the weekend. Any thoughts on what would go wrong? I still have the WP7 Root Tools installed and it seems to be working fine!
Click to expand...
Click to collapse
That's good, you don't have KK2 and if Root Tools works, it's a problem with your PC, your phone is fine! Make sure you close all programs that may use https connection. I also recommend the reading here (pasting some relevant bits):
Steps for unlocking:
...
6. Open TCPView. (tcpview.exe inside of the downloaded archive) Click on the heading marked "Local Port" until the arrow next to it is pointing up.
7. Look on the Local Port column for any entries labeled "HTTPS". These programs MUST be closed for Chevron to work properly. Common culprits are Skype, and XAMPP. Use Task Manager (CTRL+ALT+Delete) to ensure they are closed if you run into issues.
As of now, when we charge the phone, it shows a max of 70+. Hardly does it move beyond.
However, when we run AtrixBatteryFix.apk, it shows >100%. I have seen it go beyond 200% as well when i run the fix from the apk again and again.
battd changes is to fix the percentage problem and hwcomposer.default.so is to get rid of HDMI infinite loop. Thanks @fehead for putting it altogether and creating a zip.
"JUST FLASH THIS ZIP" (Forget not to thank @fehead in http://forum.xda-developers.com/showpost.php?p=59671500&postcount=12)
After this, Run AtrixBatteryFix application and you should see the battery percentage coming properly.
When the battery fell <80%, i put it on charge and it reached 90%.
I hope this fix helps 4.4.4 users who have battery percentage issues.
guruzen said:
As of now, when we charge the phone, it shows a max of 70+. Hardly does it move beyond.
However, when we run AtrixBatteryFix.apk, it shows >100%. I have seen it go beyond 200% as well when i run the fix from the apk again and again.
Here is a way to fix this problem.
1. Extract batt_fix_444.zip
2. Replace "battd" under /system/bin. (Back up the old one in sdcard)
3. Change the permission similar to rest of the files under /system/bin
4. Replace "libbattd.so" under /system/lib. (Back up the old one in sdcard)
5. Change the permission similar to rest of the files under /system/lib
After this, Run AtrixBatteryFix application and you should see the battery percentage coming properly.
When the battery fell <80%, i put it on charge and it reached 90%.
I hope this fix helps 4.4.4 users who have battery percentage issues.
Click to expand...
Click to collapse
in what why this method is diffrent from batteryfix.apk by railov? is it permanently? i wont need to run batteryfix.apk ever again?
torecdude said:
in what why this method is diffrent from batteryfix.apk by railov? is it permanently? i wont need to run batteryfix.apk ever again?
Click to expand...
Click to collapse
Running the fix the OP provided fixes the 70% cap that some users are experiencing and prevents the 100-200% showing when only using the batteryfix.apk before applying the OP's fix
As reported in the CM11 thread, adding the 1% line to the build.prop also assists in making this fix better. You can still run the batteryfix.apk if you want after applying fix
Will this work on CM10.1?? I've found some battery issues
Great jobs !! Work good~ battery 100% is come back !
I've installed it, after installing ir ive deleted the batterystats and battd resources under data/battd, now the battery shows real porcentage and lasts around 2hs+
Works on [ROM] CM 11 ( Android 4.4.4 ) for Atrix (BigPart) by Zn7mkUKzN1r8aCIV
This fixed the annoying battery percentage issue I was having. For me it was stuck at 85% but the voltage was correct and my phone was lasting an 1-2hours at 1%.
I will report back if it has a noticeable impact on battery life.
Thanks!
EDIT: Odd this morning its at 102% @ 4203v. I'm pretty sure my battery is worn enough that it shouldn't be able to reach that voltage. Backstory: after some usual usage involving an external battery my phone got stuck at 66%. Rebooting had no effect. I learned many moons ago that rebooting and shutting down isn't the same as pulling the battery. When I pulled the battery and reinserted it read 99% @ 4197v - success! So I plugged it into my slow charger over night to maintain that level.
the apk from where I can download? inside .zip I do not Seg.
Thank you
-- Sent from my Palm Pre using Forums
joshua764 said:
the apk from where I can download? inside .zip I do not Seg.
Thank you
-- Sent from my Palm Pre using Forums
Click to expand...
Click to collapse
Where in the first post did it say that zip had an app in it? Did you try searching for the app in the appropriate section?
Sent from my ATRIX HD using XDA Free mobile app
palmbeach05 said:
Where in the first post did it say that zip had an app in it? Did you try searching for the app in the appropriate section?
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
I will find the apk. Thank you.
Enviado desde mi GT-I8190 usando Tapatalk 2
battery fix + infinite loop of hdmi mirror battery drain fix
I made update.zip file for battery fix(this thread)
and Plus HDMI MIRROR battery drain(infinite loop of hdmi mirror) fix.
http://forum.xda-developers.com/showpost.php?p=54947913&postcount=129
http://forum.xda-developers.com/showpost.php?p=54940267&postcount=121
This update works...
delete /data/battd directory. (but this directory will be recreated. first time 108% charge, next time 100% charge)
replace /system/bin/battd.
replace /system/lib/libbattd.so.
add /system/lib/hw/hwcomposer.default.so file.
delete /system/lib/hw/hwcomposer.tegra.so file.
fehead said:
I made update.zip file for battery fix(this thread)
and Plus HDMI MIRROR battery drain(infinite loop of hdmi mirror) fix.
http://forum.xda-developers.com/showpost.php?p=54947913&postcount=129
http://forum.xda-developers.com/showpost.php?p=54940267&postcount=121
This update works...
delete /data/battd directory. (but this directory will be recreated. first time 108% charge, next time 100% charge)
replace /system/bin/battd.
replace /system/lib/libbattd.so.
add /system/lib/hw/hwcomposer.default.so file.
delete /system/lib/hw/hwcomposer.tegra.so file.
Click to expand...
Click to collapse
Thanks for putting it altogether.. I have updated the original post with the zip that you have provided.. Thanks a ton.
guruzen said:
Thanks for putting it altogether.. I have updated the original post with the zip that you have provided.. Thanks a ton.
Click to expand...
Click to collapse
Ok.
fehead said:
I made update.zip file for battery fix(this thread)
and Plus HDMI MIRROR battery drain(infinite loop of hdmi mirror) fix.
http://forum.xda-developers.com/showpost.php?p=54947913&postcount=129
http://forum.xda-developers.com/showpost.php?p=54940267&postcount=121
This update works...
delete /data/battd directory. (but this directory will be recreated. first time 108% charge, next time 100% charge)
replace /system/bin/battd.
replace /system/lib/libbattd.so.
add /system/lib/hw/hwcomposer.default.so file.
delete /system/lib/hw/hwcomposer.tegra.so file.
Click to expand...
Click to collapse
they have been tested in android 5.0?
joshua764 said:
they have been tested in android 5.0?
Click to expand...
Click to collapse
No b/c 5.0 is not stable enough and we don't know if the mod for a dalvik/ART system will work on an ART only system. On top of that, this thread is for 4.4.4, not 5.0, 5.0.1, 5.0.2, or 5.1.
Sent from my ATRIX HD using XDA Free mobile app
joshua764 said:
they have been tested in android 5.0?
Click to expand...
Click to collapse
It's only for 4.4.4.
guruzen said:
"JUST FLASH THIS ZIP"
After this, Run AtrixBatteryFix application and you should see the battery percentage coming properly.
When the battery fell <80%, i put it on charge and it reached 90%.
I hope this fix helps 4.4.4 users who have battery percentage issues.
Click to expand...
Click to collapse
I just flashed zip with recovery, I think its fixed now...Do I need to do anyting with the batteryfix application ? I dont even installed it, just flashed the given zip and restarted phone...
OBLIVION007 said:
I just flashed zip with recovery, I think its fixed now...Do I need to do anyting with the batteryfix application ? I dont even installed it, just flashed the given zip and restarted phone...
Click to expand...
Click to collapse
You're good to go. You can install that app if you want. Its been a few wks since i was doing stuff with my A4G, so i can't give feedback on that beyond what i've said so far
Sent from my ATRIX HD using XDA Free mobile app
Hi, guys!
The HDMI mirroring works perfectly with audio?
What ROM are you using?
With many thanks to @TaylorofCanada for acquiring and sharing this ROM, I would like to share with you a method to downgrade a Samsung ATIV SE to Windows Phone 8.0 GDR3. This method can be used to completely remove the Preview for Developers configuration from your device. This method wipes all of your data, and you cannot restore 8.1 backups on 8.0; if you are not experiencing significant issues with the current preview release, it may be ideal to wait patiently until another PFD update is pushed to this device. Another reason to flash 8.0 would be to take the OTA updates to 8.1 when they are released, in the event that the updates (or at least the firmware update) are not initially available to users with PFD installed (and you grow impatient). I have compiled a .zip file which contains everything that is necessary for downgrading your device. The .zip contains a README.txt file which contains detailed instructions on following the correct process; read it carefully and completely before attempting to follow.
If this method has brought you enough relief to feel like making a donation, I would suggest you donate to @TaylorofCanada. Without his release, this would not be possible, especially with such ease:
Code:
[URL="http://forum.xda-developers.com/windows-phone-8/development/taylors-super-rom-tool-dump-sgh-t899m-t3037789"]Taylor's Super ROM and Tool Dump![/URL]
I have created a thread for discussion of development with this device, so if you have an ATIV SE and you're into this kind of stuff, take a gander over yonder:
Code:
[URL="http://forum.xda-developers.com/windows-phone-8/development/research-reference-samsung-ativ-se-sm-t3044123"]Samsung ATIV SE (SM-W750V) - Research and Development Hub[/URL]
Please understand that following this tutorial may permanently brick your device or make it unusable in another way, even if you follow it correctly. It probably voids your warranty, as well. If this concerns you and/or you do not have a second device to use in the event of a mishap, I would suggest closing this page now. Following this process is of your own accord, and I will not be held responsible for any form of damage, losses, or anything else you may experience from proceeding. This phone has limited availability due to its Verizon-exclusive release, and as a result, there is minimal public research and development for it. I cannot guarantee that there will ever be a consumer-friendly way to de-brick your device in the future other than this, which can only do so much, so please proceed with caution:
Code:
[URL="https://mega.co.nz/#!mYhhSAZL!n4AEwN0eQfyLApr21nyGR4p9NcqIs4zo0_syN0TIk34"]ATIV SE - Flash to 8.0 Stock.zip[/URL]
Thanks
what a shame no one bothered to bump this up and show gratitude
God bless
i hv samsung ativ se
i want to unlock it and use it as gsm
is it possible
Can you prove some details of what the drivers look like on the PC as mine fails to see the phone and also a pic of what phone should look like when its in flashing mode
DelphianAus said:
Can you prove some details of what the drivers look like on the PC as mine fails to see the phone and also a pic of what phone should look like when its in flashing mode
Click to expand...
Click to collapse
Did you follow this tutorial when installing the drivers?
Code:
[URL="http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/"]http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/[/URL]
Also, download mode on this phone is Vol Up + Home.
Yes the unsigned drivers are installed ok. i have two laptops one win 10 64 bit and the other i put a fresh copy of win 7 32 bit on just to compare. both act like they see the phone but do nothing when it gets plugged in.
On Both systems the phone shows up as Samsung Windows 8 Phone , under universal serial bus controllers
DelphianAus said:
Yes the unsigned drivers are installed ok. i have two laptops one win 10 64 bit and the other i put a fresh copy of win 7 32 bit on just to compare. both act like they see the phone but do nothing when it gets plugged in.
On Both systems the phone shows up as Samsung Windows 8 Phone , under universal serial bus controllers
Click to expand...
Click to collapse
Post a picture of the phone in download mode, i wanna make sure you're at the right mode.
EDIT: I saw your other post. The lightning bolt is incorrect. You need to hold both Volume Up AND the windows/home button
Ok did not know the home button was the windows key now I do that it comes up into download mode and I get normal operation I he it saying every thing is fine . How long should it take once I hit start ?
DelphianAus said:
Ok did not know the home button was the windows key now I do that it comes up into download mode and I get normal operation I he it saying every thing is fine . How long should it take once I hit start ?
Click to expand...
Click to collapse
Just be patient. Once the Gears are spinning you can unplug it from the computer. Glad you got it working
G.moe said:
Just be patient. Once the Gears are spinning you can unplug it from the computer. Glad you got it working
Click to expand...
Click to collapse
got it working... after the nov update on my win 10 laptop finished ( it took 12 + Hours )
Got the stock rom on it ok. can you give some pointers on what to do to get the internet sharing working ? i assume get the phone into download mode and use MBM Creator to modify it i will search the forums in the mean time.
DelphianAus said:
got it working... after the nov update on my win 10 laptop finished ( it took 12 + Hours )
Got the stock rom on it ok. can you give some pointers on what to do to get the internet sharing working ? i assume get the phone into download mode and use MBM Creator to modify it i will search the forums in the mean time.
Click to expand...
Click to collapse
Glad you got it working!
I don't think MBN Creator works with this phone, but let me know if you get it working. Here are some helpful guides:
MMS/Internet sharing (haven't tested, I'm on VZW): http://forums.windowscentral.com/samsung-ativ-se/339425-6.htm#post3309723
Upgrade to Windows 10 (this is partially incorrect; once at Windows 10 you can and should do a Hard Reset): http://forums.windowscentral.com/sa...rading-samsung-ativ-se-windows-10-mobile.html
Mbm creator works i have changed tge csc code to match what my older ativ s had.
G.moe said:
Glad you got it working!
I don't think MBN Creator works with this phone, but let me know if you get it working. Here are some helpful guides:
MMS/Internet sharing (haven't tested, I'm on VZW): http://forums.windowscentral.com/samsung-ativ-se/339425-6.htm#post3309723
Upgrade to Windows 10 (this is partially incorrect; once at Windows 10 you can and should do a Hard Reset): http://forums.windowscentral.com/sa...rading-samsung-ativ-se-windows-10-mobile.html
Click to expand...
Click to collapse
I'm going to go look at the windows 10 one... i have now got the phone on 8.1
Got Windows 10 on my ativ SE. still working around the LTE APN Setting. but i did manage to get a registry editor on my ATIV S NEO and its got a working LTE APN on it so i will duplicate it and see how i go.
DelphianAus said:
Got Windows 10 on my ativ SE. still working around the LTE APN Setting. but i did manage to get a registry editor on my ATIV S NEO and its got a working LTE APN on it so i will duplicate it and see how i go.
Click to expand...
Click to collapse
Were you able to manage changing the APN, can you please share some details how we can do that .. thanks
Sent from my SM-N9208 using Tapatalk
Any chance of being able to flush the ativ se with the ativ s ROM? I am in UK, want to buy the ativ se from USA but if its not working correctly or something it would be nice to know that I could use the ativ s rom UK and be done with it.
I already own the ativ s its been 3 years now, but its time to let it rest, plus I cracked the screen.
Thanks in advance people and thanks for the hard work on setting ROMs and everything.
Also a quick one. Is Samsung backing away from the ativ phones? I love windows phones but Microsoft etc are not quite the same as my trustworthy ativ s. Screen is not gorilla so it feels cheap etc.
ATIV S i8750 ROM on ATIV SE sm-w750v
Anyone???
4evermetalhead said:
Anyone???
Click to expand...
Click to collapse
No, it won't run a rom for a different device. Why do you need it to run an Ativ S rom? If the problem is setting it up for a different carrier, you can adjust that through the registry, as long as the phone's hardware supports your carrier.
G.moe said:
No, it won't run a rom for a different device. Why do you need it to run an Ativ S rom? If the problem is setting it up for a different carrier, you can adjust that through the registry, as long as the phone's hardware supports your carrier.
Click to expand...
Click to collapse
Is not only the carrier i am worried. So since my Ativ S works perfectly fine (to what i need it to do) i thought if something goes wrong with the SE i could use the S ROM and be fine.
Oh well. i guess we will see???
I am using Ativ SE in India (got it from US) and it works flawlessly.. I am sure it would work on any GSM without any issues.. Worst case you may have some challenges in setting up APN but for that you don't need to port Ativ S ROM.. There are multiple tweaks which will take care of such issues
Sent from my SM-N9208 using Tapatalk