Related
when i try odin back to stock from cm7 screen on the phone went light orange and odin stopped working .now phone is dead any ideas, its actually second time ,never ever have problem before
Have you tried removing the battery and going into download mode plugged in?
nothing works cant put the phone in download mode or start
rafal2006 said:
nothing works cant put the phone in download mode or start
Click to expand...
Click to collapse
Even after removing the battery and trying from USB power? Have you tried different cables/ports/computers?
man i try every possible configuration (done flashing a lot never have problems before cm7 i always was able to go back with odin)
It was a bad connection... biggest give away was the color...wait a solid color right? Like everything went blank and it turned orange? If so then its your cable use a different cable....
Also did you have repartition check as well as auto reboot?
Not to be that guy but better me than some jacka** but this posted in the wrong section should be in q&a
Sent from my SPH-D700 using xda premium
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
yes
rafal2006 said:
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
Click to expand...
Click to collapse
Leave the battery out for a while like an hour or so and then try it again....
But it could be the cable keeping it from going into download mode cuz its bad
Sent from my SPH-D700 using xda premium
rafal2006 said:
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
Click to expand...
Click to collapse
Keep trying all the suggestions. Sometimes it just gets picky. Try it without a battery and with a new cable.
i have had this too
I have had this too in green, blue, and red before. I have been always been able to fix it by waiting with sdcard and battery out and trying it later.
rafal2006 said:
ok but i cant put the phone in the download mode any more, so new phone and new cable then?
yes
Click to expand...
Click to collapse
So an update please what happened?
Sent from my SPH-D700 using xda premium
People have had success by popping battery in and out several times and simultaneously trying to get into download mode.
Sent from my SPH-D700 using XDA App
You're attempting to put it in download mode *before* connecting the cable, right?
that helped im in download mode
thanks kennyglass123
As VassagoX suggested in his posts I have had luck a number of times where I cannot get into download mode on a failed odin flash until I try with no battery in the phone and usb into pc.
1) remove battery, leave it out.
2) start odin on pc
3) plug usb into pc, and phone
4) hold 1, hit power (still no battery) to go into download mode.
Glad you were able to get it working. Figured I'd throw this out there again in case it can help anyone else.
I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Try usb jig
Sent from my GT-N7000 using xda premium
musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??
if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.
hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??
That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.
i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.
Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.
Hello everybody,
i´m new here and have a great problem on my Galaxy S I9000.
I hat Android 2.2 installed on that device and wanted to install Cyanogenmod by this guide (cant post links)
The Problem i had was i couldn´t get into the downloadmode or recoverymode (Volume up/down, home and Power button)
So i made it with the Android SDK (adb reboot download) to get into the downloadmode.
Once I was there i made the part with the heimdall flash --kernel zImage.
In the end it said the Installation was succesfully and rebootet the Phone. Now it always reboots and only shows the "Samsung Galaxy S I9000" screen and then restarts.
Notice, i didnt do anything else instead the things above (no rootet phone, no flash or something like this). I also had problems installing Android 2.3 with Kies on this device so i tried it with 2.2.
Is there a chance for me to get the phone back to stock? If i connect the USB to the PC it sounds like it detected the device, but then it restarts.
If i only stick in the USB cable to the PC without booting the device a round loading screen apears but stock.
Odin also dont show up anything. Is there anything i can do? Thank you.
Pinije said:
Is there a chance for me to get the phone back to stock? If i connect the USB to the PC it sounds like it detected the device, but then it restarts.
If i only stick in the USB cable to the PC without booting the device a round loading screen apears but stock.
Odin also dont show up anything. Is there anything i can do? Thank you.
Click to expand...
Click to collapse
For USB Connection issues try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
For recovery try to Flash Rescue kit for i9000 http://forum.xda-developers.com/showpost.php?p=29331775&postcount=1
Sounds like you flashed kernel only, so the proper system is missing.
Try to get into download mode again, and flash a complete ROM (kernel, phone, csc, database, pit512, repartition...) using Heimdal or Odin. Search sammobile.com or the forum to get the ROM/version you need/want (if stock is your choice, use the 3-files-firmware).
If you want to install CyanogenMod, you'll need to get into recovery mode and install the CyanogenMod.zip from here.
Sent from my GT-I9000 using xda app-developers app
Hello, I so hope someone can help. I just updated my galaxy tab 2 7 p113 to Android 4.0.4 UEBLH2. That was done automatically from samsung. I wanted to then install the newest update to 4.1.1 jellybean. So I downloaded it from this link. http://www.trickytweaks.com/update-...ecli4-4-1-1-jelly-bean-ota-test-firmware.html. I put the official Android 4.1.1 UEBLH2 Firmware on my sdcard then held down my power and up volume and installed it. HOWEVER, it never finished installing. Went all the way to the end. Now I HAVE NO USB CONNECTION and NO BOOT UP. Just black Since I dont have usb connection I cant us oden. CAN ANYBODY PLEASE HELP? I still can put files on my micro disk card and then put sd disk in my tab and use the power button up arrow to install something but I tried installing clockwork mod but that did not work. Iam out of ideas. P.S. My tab IS NOT ROOTED. I tried updating back to and original rom 4.04 I download but that did work. Thank you.
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Mohamedselim said:
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
Yup, this should get you going again. If you can get into download mode, you should be okay. That's what Odin needs.
Download mode is volume down plus power. Then volume up
Recovery mode is volume up plus power.
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
I can not understand how you can not access usb, is it a lacking driver so download kies and reboot and try connect again ,also try a different usb ports (esp the rear of case) of your computer
Was usb working before the problem?
do you have cwm or stock recovery?
If cwm so download cm10 or cm9 from www.teamhacksung.org and put in usb card and flash but do a cash delete and dalvik delete afterwards not for boot loop
If stock so try stock firmware from www.samfirmware.com (register their first) and put in sd card and try to flash
Sent from Galaxy S2 or Galaxy Tab2
growthweb said:
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
Click to expand...
Click to collapse
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
dictionary said:
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
Click to expand...
Click to collapse
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
How about you just gtalk me, lol. I'll probably reply faster there anyway. deliberation at gmail dot com.
Don't use kies. Install the Samsung driver for mobile phones (Google it).
Sent from my GT-P5113 using Tapatalk 2
Download Mode
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
Once you are in download mode, connect your tab to the computer with the usb connection.....you should see a com xx number pop up in Odin in yellow reporting your device is connected thru a communication port. From there you will be able to choose the file you want as a PDA uncheck everything else...reboot...reset timer....whatever. Just make sure you have the correct firmware. There is a Odin flashback to Stock rom in the development section. Make sure it's for your device. Once you start Odin, should take about 4 mins...disconnect and hold the power button down to reboot. That's it....
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
growthweb said:
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
Click to expand...
Click to collapse
Glad you got it sorted.
i jus did the same thing u did
hi how r u doing. i jus did the same mistake u did and i really need your help please
Maxwell255 said:
hi how r u doing. i jus did the same mistake u did and i really need your help please
Click to expand...
Click to collapse
Hi.if u have done the exact same thing then just read the previous page and comments.
Sent from my GT-P3110 using xda app-developers app
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
PeartFan40 said:
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Click to expand...
Click to collapse
Thread is still actually open, lol
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
igotbricked said:
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
Click to expand...
Click to collapse
You have to reflash your tablet using ODIN. It's not that hard. Just follow the second method here (you don't need to download android SDK)
copy this in your navigator bar : rootzwiki . com/topic/37272-verizonsch-i705-root-for-all-current-firmware/ ( delete space around the dot)
Plus, your tab will be rooted.
You're welcome.
P.S : This limitation of URL is annoying as hell.
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.
GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk
lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!