Related
Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test
Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).
It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.
Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike
I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!
I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.
BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.
jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike
Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike
Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.
yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike
White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers
my first for ages.
I recently purchased a wizard which looks to be virtually brand new.
now the other day I updated it the the o2 uk latest rom as it was running a really old rom.
and it has been running perfectly, i have not looked into running any other rom or performance upgrades etc.
now I was using the device in landscape and after closing the unit my screen went bright white and my pride and joy is now not usable.
I can still acept calls, the touch screen still works but the screen is pure white.
Ive contact a few places and they all say the screen has died and needs replacing
Does this sound right.
its a £80 fix if this is right. im so gutted.
any advice is great before i pack it up and send it off.
anyone please....
Can you put it into bootloader mode? If not i would say you have a loose connection on the screen to the mainboard i had the same problem with my old phone the screen disconnected for the main board so no display! If you cant get it replaced take it apart and carefully check the connections if still doesnt work i would try another screen or buy one.
even when i reset it, it stays whits so cant see anyhting on screen,
ive had someone take it apart and re-seat the cables and still just a white screen
so im off to purchase another one in hope this is all thats gone
as your phone is booting up press and hold the camera button, is the screen still white?
cant tell now. ive sent if off for repair.
Im gutted.
bleep said:
cant tell now. ive sent if off for repair.
Im gutted.
Click to expand...
Click to collapse
I had a similar issue, the keyboard sliding in and out must have worn out the switch that detects when it is open/closed. I had had my wizard a year and the screen started flickering, i dealt with it for a while, then the scree was stuck blank white unless if i pressed on the area of the phone that had the contact.
I had to send it back and got a refurb.
sounds like thats what happened to you too. Hopefully when you get it back it will be good as new
ive sent mine for a screen replacement tho not a repair.
now im worrying that its gonna come back in the same state.
Gulp
got my wizard back after having the screen replaced.
2 days later when ever i touch the bottom of the screen with pen, finger or even breath on it.
the screen goes off and the phone locks up and dies.
I have to take battery out and restart it and it then works great till i touch the bottom again.
Sound like a dodgy screen or something else.
Seems like a flexi strip(The one conecying the display to the mother board) sometimes if the strip develops a tear or is not properly connected this issue usually happens.
the shop doing the repair have said there is the following issues
1- padding issue on the screen (either too much or not enough)
2- Problems with the main board. (something on there is failling, hardware wise)
How the hell could this be happening on a device that was working perfectly
apart from the screen had died.
have they done more damage attempting the repair... I think so .!
I had the white screen 6 months ago. Luckily still under warranty period so got it repaired. It was the flexo-cable. since the fix no problem so far despites using the phone (also in landscape mode) daily.
when i got it back after the screen was replaced my xda worked great but as stated as soon as some preasure was applied to the bottom of the screen it would just die there and then.
I would have to take the battery out and then it would power on as normal
but again if i put presure on the bottom of the screen.. bang DEAD !
so sent it back to them and they told me what I stated above !
now waiting 2wks to hear what they are gonna do about it
not a happy bunny
still nothing back from the company thats doing the repair.
i dont know why they do this.
Im now thinking of getting my Xda back, selling it either on here or ebay and purchasing a new one.
Should i quit now or wait out for the miracle that they fix it completly.
Anyone in the uk reconmend a good repair company please im pulling my hair out.
http://forum.xda-developers.com/showthread.php?t=303872
theres your answer
After 4 months of flawless work, the lower part of the screen (a strip several millimeters from the edge) suddenly stopped responding properly!
E.g., all buttons in this area (including launcher/phone/+ on home screen) either don't work at all, or sometimes activate after a while when strongly pressed with the thumb (orientation doesn't matter).
Just two hours before they responded fine to the index finger.
Also, I've noticed that when I "multi-touch" the lower line in a file browser with two fingers, it works nice! Buttons are too small for that, however
I first tried to restore backup, but it didn't help, of course.
Has anybody had the same problem?? I guess it's a warranty case ...
I would agree, it's probably a hardware problem that you'll have to bring your phone in for service to get fixed.
I'm having that same problem my self, but just now and then. What helped with me is that I press the upper left corner of the phone with my other hand and then the lower part works fine, so i think i should get a new digitizer or its just loose connector.
im having the same problem , i have put up with it for the past few weeks and its driving me nuts now. today i did a factory reset which made no difference , i called htc who didnt sound a bit suprised by my phone call it gets picked up tomorrow morning to go for repair so the question is ... is this a common fault? and how the hell am i gonna cope without my hero in my pocket ?
Yeah happened to mine last week, a few have had the same issue where it's just the launcher bit not responding. Although the good news is that I'm getting it back tomorrow though so it's good times!
I had the same problem with my touchscreen (after a month or so!)
Mine got picked up thursday by HTC and I just checked the tracking site and they just recieved it.
I wonder how long it's going to take
Visited their service center last week.
They've immediately replaced my screen with a new one without any ado. Now everything works as before!
BUT a friend of mine who bought his Hero in January is having similar problems now...
It is a common problem according to HTC.
Mine was repaired in just 10 days.
Same problem here, did htc said anything about this problem? is it a common fault?
thank you
I said it in the post above yours.
ah yes, right, thank you
mach2005 said:
It is a common problem according to HTC.
Click to expand...
Click to collapse
If they acknowledge it officially, couldn't you provide a link please?
i gave mine last week to repair, they returned to me unfixed. on the paper stated that they only updated the software, what a dumb this htc guys. need to go back and tell them again the same story. im wasting my time only for this. wtf
I recently had this problem. The 3 buttons at the bottom of the screen wouldn't respond, took it into T-Mobile who said I'd have it back within about 7 to 10 days... 3 weeks later I got a text saying I could collect my phone...
On the paper sheet it says they've replaced the lens.. Which I can see they have as before I had a miniscule hairline scratch near the top.
They also mention a software update (1.0.0.A6288)
Either way it works nicely now.
I've recently experienced the same issue - the lower part of the screen, the one where the LauncherPro icons usually are stopped responding to touch. If I press really hard it works sometimes, but it's pretty annoying. I didn't sit on the phone or drop it recently, it just stopped working all of a sudden.
Is there anything I can do, as the phone is out of warranty ?
HTC South Africa gave me a new hero after I took mine in for the 3rd time. Hardware problem. Very happy with their service.
i have this exact same problem, is the only solution to send to htc? >_> Cuz my warranty's out already unfortunately... i flashed my hero to CyanogenMod 7 and it seems to have helped, but still not completely responsive... I also have a problem where at times i completely lose control of my touch screen where the spots i touch seem to respond to opposite sides of the screen... anyone else?
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
^ wtf do u mean?... are u just being a gimp...
VillainRocks said:
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
Click to expand...
Click to collapse
i am having the same problem and i badly need to solve it please could u tell me that what do you exactly mean by put a dryer on the htc logo
thanks
I remember reading a thread about this back when the HD2 was released, but I haven't really thought about it until now.
Since I bought it on the release date, I've been having problems typing on my HD2. The keyboard seems over sensitive and not accurate. When I press one letter, I genereally get the one next to it. When I try and delete the accidental character, I end up typing a heap of L's, M's and P's!
If I do the screen re-alignment it seems to be better for a while, but then after a reboot (which you need to do every couple of days with WinMo!) it goes bad again.
I hate texting now and entering passwords is impossible! I've got to the point where sometimes I want to throw the damn thing away.
I've had 2 iPhones, and HTC Touch Diamond and Touch HD previously so I know its not me. If I try my father-in-laws HD2, I can work it no problem.
I contacted HTC who told me to try a Hard Reset - but as I flash ROMS frequently I know this isn't going to make a difference. They said to contact them if the Hard Reset doesnt work and send the phone in for repair.
Obviously I'll need to reflash a stock ROM first!
Has anyone sent their phone back and what happened? Did it get fixed, and how long does it take?
p3eps said:
I remember reading a thread about this back when the HD2 was released, but I haven't really thought about it until now.
Since I bought it on the release date, I've been having problems typing on my HD2. The keyboard seems over sensitive and not accurate. When I press one letter, I genereally get the one next to it. When I try and delete the accidental character, I end up typing a heap of L's, M's and P's!
If I do the screen re-alignment it seems to be better for a while, but then after a reboot (which you need to do every couple of days with WinMo!) it goes bad again.
I hate texting now and entering passwords is impossible! I've got to the point where sometimes I want to throw the damn thing away.
I've had 2 iPhones, and HTC Touch Diamond and Touch HD previously so I know its not me. If I try my father-in-laws HD2, I can work it no problem.
I contacted HTC who told me to try a Hard Reset - but as I flash ROMS frequently I know this isn't going to make a difference. They said to contact them if the Hard Reset doesnt work and send the phone in for repair.
Obviously I'll need to reflash a stock ROM first!
Has anyone sent their phone back and what happened? Did it get fixed, and how long does it take?
Click to expand...
Click to collapse
i have the shaking screen issue when zooming and i cannot detect if it is hardware issue or software or it is normal
Search for "weird touchscreen behaviour".
If you send it back to HTC they'll change the screen and it will come back fixed, or they'll do something random and it won't.
I don't think its just you, I have similar issues! I'm learning to type slower, and there are some links in the tips & hints thread that may help.
I reflashed back to the stock ROM and surprise surprise, same problem.
I emailed HTC back who then said it would have to come back for repair.
They said to phone them to arrange, so its all set up - being collected by UPS tomorrow. Hopefully it will all get sorted.
On another note - I'm now using an old Nokia 3600 Slide while my HD2 is all packed up. I'm loving having an old keypad again! Texting is a delight again, and the small form factor of this phone is great. Its a shame the screen is tiny and the Opera Mini functionality is poop!!
If HTC did a modern version of the Touch Dual with a big touch screen and a slide out keyboard then I'd buy one in a flash! Maybe I'll get a Touch Pro 3 when it comes out
did you try this?? it works for me.Hope it helps
jaqubek said:
did you try this?? it works for me.Hope it helps
Click to expand...
Click to collapse
I have been using that - or a similar one - for the last few months, which helps a bit. The problem isn't the sensitivity though, its the accuracy of the screen. When I press 'P' I get 'O', or 'R' I get 'E'. Its like its not quite lined up correctly.
hmm... I had exactly the same problem,but just because screen was too sensitive and this cab helped. Have you also tried align screen??
If this one won`t help I think your fingers are too big (sorry,joke)
hoss_n2 said:
i have the shaking screen issue when zooming and i cannot detect if it is hardware issue or software or it is normal
Click to expand...
Click to collapse
I have the same issue...
Registry tweaks to decrease sensibility help but I think is a hardware problem, so I'd like to know if someone has sent his phone for repair
patton82 said:
I have the same issue...
Registry tweaks to decrease sensibility help but I think is a hardware problem, so I'd like to know if someone has sent his phone for repair
Click to expand...
Click to collapse
all my friends iphones have this issue but less than hd2 i think it is capastive screen issue
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Did you flash the phone back to stock at all?
Yes, you need to remove the HSPL and that can only be done by flashing a stock rom from the memory stick - USB flashes the stock rom but leaves the HSPL intact. If you don't they will send it back to you saying the warranty is void. As well as replacing my screen they upgraded the stock O2 rom I had on it so they obviously check the software even if it's a hardware issue you have sent it back for. It goes without saying the first thing I did when I opened the box was replace the HSPL and flash Xannytech's Evolution.
I know to get rid of it, was just wondering if you did
Touch wood never had to send mine back but at least they can't tell you've HSPL'd it in the past...
hoss_n2 said:
all my friends iphones have this issue but less than hd2 i think it is capastive screen issue
Click to expand...
Click to collapse
Not all HD2 have this issues, at default (without registry tweaks) was impossible to write anything for me.
Pagnell said:
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Click to expand...
Click to collapse
You had a different kind of issue, should know if someone with shaking/poor accurancy screen has sent his phone back
Well folks... my phone was picked up last week by UPS and returned to me today.
Before sending it off I reflashed the stock ROM and got rid of HSPL.
I've tested it a bit and am very happy - so I'm now flashing my Miri ROM back on as I type! HTC have replaced 'LCM (LCD)' and replaced 'Rigid-Flex Board (FPC Board)' as their diagnostic stated 'Touch Panel function abnormally and Camera Flash Malfunction'.
Typing feels like it should as the key I hit is now the one that actually presses. I don't know about the camera as I haven't tried it yet - but I didn't think there was anything wrong with it.
My only complaint is that the phone went in for repair with an HTC Screen Protector fitted, and they must've removed and refitted it - as its full of bubbles and knackered! Never mind - I'll order another one.
If anyone has the problems I described... contact HTC and get it sorted, as this is like using a new phone. Hopefully I won't feel the need to throw it again!
I'm mightily pissed off as I have just had to return my Leo back for the 2nd time with exactly the same problem as I had previously (see above). HTC and their crappy cheap LCDs must be costing them a lot of money.
I've been experiencing almost all the bugs in my HD2, last month i sent it back to HTC for repair.
They changed the touchscreen and display because they thought it wasn't bright enough (i didn't notice that).
I got it back a week ago and immediately saw that i now have a different touchscreen, more dots and diagonal lines can be seen.
All the problems are gone and i haven't been experiencing any problems the last week.
My Advise for people with touchscreen problems, have your touchscreen replaced !
Pagnell said:
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Click to expand...
Click to collapse
i had the white blotches issue too and htc also replaced my screen under warranty (turnaround 11 calendar days) and paid carriage both ways; this despite my lacking a sales invoice, having bought the phone used on ebay and the moisture tab being tripped (which they also replaced).
a very good service from htc only slightly spoiled by the tech who reassembled my phone leaving a fingerprint on the *inside* of the camera lens cover glass which rather than sending it back to them again, i cleaned off myself by means of unscrewing the back panel.
Hi all dear members. Since the first day i bought this phone i've been seeing lots of screen issues about it but i never thought i would have one. It's proved me wrong.
So here's my problem, my device has developed halo all around it when the bg color gets grey. Most of the time , it's not obvious. I can live with that. Recently, my screen starts to show me some tv-like stripes every now and then, it doesn't last long. after one second or two, it disappera and then it'll show from time to time.
I'm afraid it's just the start. It's similar to most of the issue ppl claim as screen flikering or screen jittering or shaking screen, it's a bit different though.
Has anyone encountered the same issue. More importantly, has anyone found any solutions yet? I searched google and failed to find answers. And i looked into it on Baidu,a chinese search engine, where i found some answers that claims it's not the screen issue ,instead , it's just the ribbon cable is lose. And anyone who replace a new screen for that is stupid.I'm just not sure about this.
My phone was bought on the internet and shipped to China, thus, I don't have warranty to rely on. And my phone is only 10 months old. I never dropped it and i have kept it well.(LG logo on the rear back still falls off), I just don't get why LG made this so vulnerable.
Even though i have ordered the nexus 6, my g2 running CM12 is still crazily fast and I don't want to give up on it. I'm so happy about my d802 except for all issues about the screen.
Any help would be aprreciated. Thanks again. Hi all dear members. Since the first day i bought this phone i've been seeing lots of screen issues about it but i never thought i would have one. It's proved me wrong.
So here's my problem, my device has developed halo all around it when the bg color gets grey. Most of the time , it's not obvious. I can live with that. Recently, my screen starts to show me some tv-like stripes every now and then, it doesn't last long. after one second or two, it disappera and then it'll show from time to time.
I'm afraid it's just the start. It's similar to most of the issue ppl claim as screen flikering or screen jittering or shaking screen, it's a bit different though.
Has anyone encountered the same issue. More importantly, has anyone found any solutions yet? I searched google and failed to find answers. And i looked into it on Baidu,a chinese search engine, where i found some answers that claims it's not the screen issue ,instead , it's just the ribbon cable is lose. And anyone who replace a new screen for that is stupid.I'm just not sure about this.
My phone was bought on the internet and shipped to China, thus, I don't have warranty to rely on. And my phone is only 10 months old. I never dropped it and i have kept it well.(LG logo on the rear back still falls off), I just don't get why LG made this so vulnerable.
Even though i have ordered the nexus 6, my g2 running CM12 is still crazily fast and I don't want to give up on it. I'm so happy about my d802 except for all issues about the screen.
Any help would be aprreciated. Thanks again.
Hi, I also have a problem with the screen on my lg g2, appeared to me that the white line disappears and comes back, when I do print screen and transfer the image on the computer that line is not visible, and that line is not always the same intenziteta.Try to do print screen and set an image or we send the mail to compare the problem
i'm so pissed about the screen, yes, my gnex bought 3 years ago looks yellow and ****ty. but other than that, totally fine, but for g2, ive read so many complaints about it. Guess no one has figured it out. Maybe I will open my phone and try to figure out when the screen completely goes crazy. During I type, it has happed for 4 times . so very annoying.
Sent from my LG-D802 using XDA Free mobile app
I think you should try to put in some rom, I hope it's a software problem, I found the solution for my phone cloudy g3:good:
i flash different cm12 nightlies. i don't think its a software related issue. I'm not the only one with this issue. Yesterday I opened this phone ,well with my fingernails. And coz I didn't have the right screwdriver, I wasn't able to open that black cover at the button down bellow the battery, but I cleared the places around the USB port and there's a black tape glued near the camera , I pressed it and I put the phone together and guess what, the problem was gone for one day, and I will continue to keep an eye on it.
Sent from my LG-D802 using XDA Free mobile app