Has anyone noticed that when you press the camera button, the screen brightness goes up above the maximum level available?
Just wondering if anyone knows of a registry hack that will keep the screen at this higher brightness level?
Cheers
i know of one.I can send by message...
I wrote VJLumos II to do this.
Chatty has written a better one more recently just for the magician, called CameraSetBL/ CamSetBL.
V
I donwloaded it ( camsetbl ) but i dont know how to use it.
the links tell me that .exe is not find. exe is on my sd like those other links!
please help!!!
damien
Damien - you have to install the app to the same folder the links are hardcoded to. That might mean nothing to you, in which case, download gsfinder or another explorer that can make links.
Find camsetbl, make a shortcut to it, edit the shortcut to use the command line options Chatty indicated, eg -on, -install etc.
If that means nothing to you either, do some more reading or try using my version.
V
Hi,
download my zip from this thread, then put all files from the zip into \ on your Magician.
(If you want to use another directory edit all *.lnk files beforehand with any text editor (notepad for instance) to suite your chosen directory.)
Once copied, tap "on.lnk" or "off.lnk" to set BL (=backlight) once to the selected state (goes to off during suspend automatically). If you want it on all the time you may consider "installing" it by tapping "install.lnk". This uses the notification queue to run "on.lnk" every time your Magician comes off of stand by.
Getting CamSetBl to install
Chatty,
Thanks for your help but I'm still having trouble getting CamSetBl to stay on. Now that I realize that the files go into \ (not \Program Files) the shortcuts turn the program on and off, but the -install shortcut seems to do the same thing as the -on shortcut, ie it doesn't keep the backlight bright after you turn the power off. Strangely, the backlight stays bright for me no matter how I turn CamSetBl on as long as I only turn the JAM off for a second or so. Any longer than that and the backlight goes back to the old level. Any ideas?
Thanks.
Chatty said:
Hi,
download my zip from this thread, then put all files from the zip into \ on your Magician.
(If you want to use another directory edit all *.lnk files beforehand with any text editor (notepad for instance) to suite your chosen directory.)
Once copied, tap "on.lnk" or "off.lnk" to set BL (=backlight) once to the selected state (goes to off during suspend automatically). If you want it on all the time you may consider "installing" it by tapping "install.lnk". This uses the notification queue to run "on.lnk" every time your Magician comes off of stand by.
Click to expand...
Click to collapse
I Have A Tmobile Wing, I Have Already Changed The Splash Screen But I Know It Has To Be A Way To Change The Startup Sound Just Like I Changed The Splash Screen. What File Format Does It Have To Be In And What Do I Call It? Also If There A Size Limit On The Sound Byte?
anybody??
look for a sound called startup or some thing like this in \windows folder..or u can use Audio Boot ( a s/w)
Change Start-up Sound
First you have to have a Registry program like Resco.
Find or create a .wav file and copy it into your windows directory with whatever name you want, just remember exactly what you called it.
Open your Registry program and got to:
HKEY_LOCAL_MACHINE
Software
HTC
Startup Animation
The bottom two should be Volumn and WAVfile
If there is already something there just change the string to your file name. If nothing there you will have to add as follows.
Choose WAVfile Name = Wavfile and string = \Windows\yourfilenamehere.wav
Choose Volumen Dword data =4555 and Base= dec
Click Done and Exit Perform soft reset and watch and listen. I'm no Pro, but that should be correct. Let me know.
Edit- I double checked the setup in my device TILT and this is what I had.
[HKEY_LOCAL_MACHINE\Software\HTC\StartupAnimation]
"Volumn"=dword:000003E8
"WAVFile"="\Windows\YourFileNameHere.wav"
"Enabled"=dword:00000001
"GIFFile"="\Windows\animated.gif"
"Priority"=dword:000000C8
worked great, thanks. also i say the tmobile startup wall paper, i can change that the same exact way i changed my splash screen and just edit the registry value correct?
T-Mobile Start screen
If you are refering to the very first Boot screen then NO. You have to flash that with RUU like you do a ROM. The animated.gif file and the
welcomehead.96.png are easily done. You just have to name them as above and use Resco File Explorer to drop into Windows directory and overwrite the original file. If you want to keep the old file and not overwrite just rename it by adding a "2" after the file name that way you know which one is which. That way you can just rename it again to the original if you want to put it back. Glad to actually help someone, Kevin
Been experimenting a bit with this as well...
Works all fine but I just don't understand the "Volumn" registry value. On my Hermes, it was set to 9 by default, giving a pretty loud startup sound. On my Kaiser I set it to 4555 now before I could even hear it, and still it's pretty silent. Both are running WM 6.1.
Any logic behind this? (except maybe that a Kaiser isn't a Hermes )
You can use Schap's adv config, didn't work for me on my Touch, maybe it will work for you. But, I manually changed the sound. It's either startup.wav or silent.wav.
Works half now
Some sounds are played okay, but I tried the Diamond startup sound and that one just makes a strange noise instead of the real sound... Works fine when playing it in Media Player
I'll just keep messing with it some more
Hello All.
I was jus wonderin that could i change the Spash screen where the Windows green screen come up as i find it a lil annoying and want to change it to some good screen made by me...
Any help on this...
yea its quite simple. connect to your pc, make sure you got your pc set to view hidden and system files. then go into the windows folder on you phone and look for ms_splash or something like that then copy it over to your computer, edit it then put it back on your phone. (you will have to remove the "read only" property). you can use resco explorer to overwrite on your phone if you want to
Will give it a try and will show the results asap
This thread is for those who use the HTC Lockscreen and who:
A) Like the slider at the top of the screen, but are looking for a fix for that pesky 3-4 second delay before it becomes responsive. For this method, you can either apply the reg edit below in "UPDATED FIX 1-Dec-2010 Registry Edit Fix", install the attached cab and follow the instructions in the "UPDATE 1-Jan-2010 paragraph" or install the startup exe. as per UPDATE 30-March-2010;
and for those who...
B) would like to flip the slider from the top to the bottom. For this, I highly recommend HeartofWolf's Lockscreen fix located here http://htcpedia.com/forum/showthread.php?t=363. There are plenty of mods that move the slider to the bottom, but the benefit of his cab is that the calendar notification icon disappears once a calendar event has expired. The downside for me is that the slider is resized a bit too skinny. If you install the cab and find the slider to be too small and would prefer the slider to be the normal oem size, I have modified the LS_Lockscene_480x800.cpr to do just that. Further in the mod, I have moved the slider up from the bottom to be at approximately thumb height. To install the modified LS_Lockscene_480x800.cpr:
1)You will first need to install HeartofWolf's Lockscreen fix V4, if you haven't already.
2)Download and unzip the LS_Scene_480x800_modification file below.
3) Move the LS_Scene_480x800.cpr file to your device and copy and paste it into the lockscreen folder located in File Explorer->Windows->Lockscreen.
4) Soft-Reset. You're done.
Note: If you install HeartofWolf's cab, there is no need to install the registry delay fix. Flipping the slider from top to bottom solves the delay. If you later uninstall the cab, you may lose the lockscreen. If that happens, no problem, just copy the original lockscreen files also attached below back into the Lockscreen file in File Explorer->Windows and soft-reset.
TIP: Slider Notifications
If you use the notification sliders to access missed calls, voicemail, email etc. , but wished the voicemail slider called your voicemail instead of taking you to your dialpad or the email slider went to your inbox instead of the manila tab, then take a look at the following thread by Da_G:
http://forum.xda-developers.com/showpost.php?p=4268138&postcount=3
___________________________________________
History and Updates
UPDATED 21-April-2010 Fixed each of the notification sliders' position in LS_Lockscene 480x800 so as not to overlap the unlock slider. When I moved the unlock slider up further from the bottom to be at approximate thumb height, I did not adjust the notification sliders up along with it. So, when you had more than one notification and the sliders dropped down, one or two would overlap the unlockslider. That has been adjusted.
UPDATED 30-March-2010 Thanks and big credits to Trueg who created a start up exe. that will run the reg edit at start up. The beauty of his exe is that in the past if you realigned your screen, on your next softreset, the delay would return, at which point you would have to reinstall the cab or reapply the reg edit and soft reset. What Trueg's exe. does is run the reg edit on each start-up. So each time you reset your phone, the reg edit that solves the delay automatically runs.
To install:
1. Download and unzip the "setFirstCal" file below.
2. Copy and paste the setFirstCal.exe inside your "StartUp" folder located in File Explorer->Windows->StartUp.
3. Softreset. Done.
If you choose this method, there is no need to install the cab or apply the reg edit. This will take care of everything for you.
UPDATED 1-Jan-2010 Cab file for Registry Edit is now available below. Credit and thanks to cduijker. After installing, please remember to soft reset. If for some reason the cab does not work for you, check to see if you have the registry setting as discussed below in the "UPDATED FIX 12/1/09". If you do not have the setting then it appears this fix is not the solution for you.
UPDATED 1-Dec-2010 Registry Edit Fix
For those who would like to fix the lockscreen delay, but would prefer to do so without having to hardreset or reflash, I have the fix for you. Before I begin I would like to give a BIG thanks and credit to kieboy for testing this edit and providing feedback!
Open your favorite registry editor and navigate to:
1) HKLM\Hardware\DeviceMap\Keybd
2) look for the entry named: FirstCalibration
3) If it's there, you can do one of two things 1) delete it or 2) as suggested to me by kieboy, you can change the dword value from 1 to 0.
4) softreset. To be sure, I recommend a manual softreset using your stylus opposed to a softreset program. I've tested this fix on a couple of roms and one of the softreset programs would not allow the fix to take.
5) bring up the lockscreen in "start", push the power button to turn the screen off (standby) and then back on. The slider should immedietely respond.
If it doesn't work, you can always realign your screen and the deleted or changed value should reappear after a softreset.
Please note: From time to time you may need to realign your screen. If you do, remember to go back into the registry and perform the edit again. The reason being is that manually aligning the screen creates the value "FirstCalibration", which appears, at least in part, to be the culprit causing the delay.
Also note that on occassion the slider gets stuck on one side or the other depending on which way you slide it. If it sticks, just tap the slider and it will unlock. Doesn't happen very ofter, but it does happen.
If you would like to solve the delay by avoiding the screen alignment process altogether after each hard reset or flash, please continue reading below.
November 22, 2009 Alternative Solution
The lockscreen delay is nothing new and has been defined around the forum as a 2-3 second delay between the time the device is woken up from standby and the time the slider becomes responsive to either unlock the device or access the slider notifications. Indeed, in the past there have been some excellent fixes: mindfrost82, tommy34 and heartofwolf, just to name a few. By in large, these fixes are edits to .Cpr files and in most cases no longer work, except for heartofwolf, on the newer manila 2.1 and 2.5 roms with the HTC Lockscreen. The heartofwolf fix, however, resizes the slider and puts it at the bottom of the screen, which at the time was the known protocol to fix the delay. It should be noted that using a password to unlock is a fix too. Some are not bothered by the delay while others are. I myself like the slider instantly responsive and accesible once the screen is on. If you fall into the latter category I may have a fix.
I believe the slider delay is the direct result of manual screen calibration or aligning the screen during initial set up after either a new rom flash or hard reset. If you skip the "welcome" process, i.e. screen alignment, date and time setting etc. you will also skip the process that creates the delay. What in manual screen alignment is linked to the delay is something I am looking into.
The solution, as I see it for now, is to skip or bypass the screen alignment process altogether. Some Chefs do this already, namely Dutty, to among other things speed up the set up process.
How to do it: there are a couple of ways you can find in the forum, however, one way is to:
1) Create a blank text file on your PC and name it, welcome.not Be sure it does not save as welcome.not.txt or it won't work. If so, remove the .txt.
2) Next, place the text file in the root of your storage card.
3) Now, flash a new rom or hard reset and you're done.
Another way:
1) Open file explorer on your device.
2) Go to the root directory of your storage card.
3) With your stylus or finger, tap and hold the screen and wait for the menu to pop open.
4) from th menu create a new file and name it welcome.not
5) Now you can hard reset or flash a new rom.
It's up to you whether you leave your SD in during flash. I do not. If you do not, after the rom flash, stick your SD in and hard reset. If all goes to plan, the "welcome" phase will be bypassed, and you will not be prompted to align the screen or set the date, location, time etc.
To test and see if there is no delay, once the device is set up, go to the start menu, press the lock button at the bottom of the screen. When the lock pops up, turn your screen off. Wait a second or two and turn it back on. The slider should respond instantly. NOTE: if you go into settings and manually align the screen, upon soft reset, the delay will be back.
The screen coordinates should load automatically after the bypass. If for any reason you need them, here are the Blackstone alignment coordinates from HKLM/Hardware/Devicemap/Touch/ Calibrationdata:
511,542 183,881 183,198 834,197 883,880.
S3
Thanks for the useful info!
I also don't like the delay in lockscreen slider, so at next flash I will test it.
EDIT: I tested it and works great!!!
Thanks!!!
I stopped calibrating my screen, because it seemed unnecessary. My screen seems to work flawlessly without it.
Btw - I'm using LIA 13.5 MobileShell version without manila. I didn't calibrate and I have no delay when it wakes up. You might be onto something!
Rob
@jolas, Excellent! Did you use a blank text file or a blank file folder inside the SD root?
@Rob, I was hoping someone who did this as a matter of course would post!
Sean3 said:
@jolas, Excellent! Did you use a blank text file or a blank file folder inside the SD root?
@Rob, I was hoping someone who did this as a matter of course would post!
Click to expand...
Click to collapse
I use a blank text file (welcome.not).
Wow super tip, thank you Sean3
The welcome.not empty file works for me on L26HDLEOV3 as well
The screen react the second it wakes
//M
im not quite sure if i do something wrong in the process, but when i flash energy 28005 rom from sd card, it doesnt skip the screen allignment.
i created a blank welcome.not .txt file and put it in the sd card as described, but nothing happens...
i hate the delay, can anyone help me?
Actorios said:
im not quite sure if i do something wrong in the process, but when i flash energy 28005 rom from sd card, it doesnt skip the screen allignment.
i created a blank welcome.not .txt file and put it in the sd card as described, but nothing happens...
i hate the delay, can anyone help me?
Click to expand...
Click to collapse
The file needs to be named welcome.not instead of welcome.not.txt. Just remove the .txt and you should be good to go.
Sean3 said:
The file needs to be named welcome.not instead of welcome.not.txt. Just remove the .txt and you should be good to go.
Click to expand...
Click to collapse
the file is already named welcome.not. the ".txt" was to show that its a text file...
Edit: ok, you were right. now i removed the .txt bit.
gonna try again tomorrow.
Hope you can find the culprit for this delay for someone like me who cannot afford to do a hard reset..so troublesome. Thanks for the tip though.
I think I found it. See Edit at the top of post #1.
i don't have that key on my Hong Kong machine english rom.... I have done a calibration before and did it once more but it is still not there.. and yes i have about a 1 to 2 seconds delay... cheers...
Sean3 said:
I think I found it. See Edit at the top of post #1.
Click to expand...
Click to collapse
You DA MAN! Thanks for the fix Sean.
kieboy said:
You DA MAN! Thanks for the fix Sean.
Click to expand...
Click to collapse
Thanks for testing!
This definitely deserves a sticky.
tsttse said:
i don't have that key on my Hong Kong machine english rom.... I have done a calibration before and did it once more but it is still not there.. and yes i have about a 1 to 2 seconds delay... cheers...
Click to expand...
Click to collapse
Are you using an HD, HD2 or other? If HD, what rom are you using and what is the winmo and manila build? If you get a chance, could you list the keys that you do have?
good stuff - props given and sticky requested!
this definitly works....good work...should be added to the wiki
Thread has been stickied. Obviously if a permanent fix is already embedded into future roms or if this fix becomes obsolete I will remove it from being stickied