Related
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael
Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.
Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!
karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.
Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards
VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY
i don't have Vista, XP but same problem...
Persuader X, does it say to you "loading...no image file"?
Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.
Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see
Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.
Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus
Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers
hi everybody i am new here and i need some help
How To Install a Rom in Omnia 2 (i8000)
step by step
and thanks
Hi chabahed
I was in the same boat few days ago. After doing some research in modaco, xda forum - I had succeeded in install energy rom (I install PDA part only) - Great ROM, i must say.
You can read more at modaco forum (sorry, can not post URL since I am new member)
I only worked on windows XP - It can be done on windows 7 but I had not tried it yet
- Require software to install you need:
ActiveSync installed (from microsoft webside)
Samsung_CDMA_modem_4_1_.34.zip
OCTANS_Mini.v2.11.exe
(see the modaco link for a link to download those software)
1. Insteall ActiveSync (if you had not done so)
2. Extract Samsung_CDMA_modem_4_1_.34.zip to a directory, and run the "setup.exe" in that directory to install the drive
3. Turn off your phone (push and hold on the right button of the cube button for a few seconds) - DO NOT USE THE RIGHT SIDE BUTTON (turn off screen only) - DO NOT CONNECT THE PHONE TO YOUR PC at this time
4. Run OCTANS_Mini
5. Click ".NB0" button to upload the PDA rom that you want to flash - Now the Detect button is enabled
6. Click Detect button
7. Now connect the phone to your PC using the supplied USB cable - the phone should be off as step 3 above.
8. Wait until OCTACT detect the phone - now the Start button is enabled
9. Click on the Start button to start flashing the ROM to you Omnia2 phone
10. Take a deep breath, drink a cup of coffee - Wait until the phone seft power on and start initializing
11. Enjoy your new shiny beautifull phone - (As I am with mine )
Hi, Vphung. I'm on official Rom 6.5 proffessional. But it doesn't look cool like those customized rom. So i want one. Any suggestion on any ROMs cool and perfect for Samsung Omnia 2 i8000? and of course, if possible please provide the link to download that roms. Thanks.
Kanntola said:
Hi, Vphung. I'm on official Rom 6.5 proffessional. But it doesn't look cool like those customized rom. So i want one. Any suggestion on any ROMs cool and perfect for Samsung Omnia 2 i8000? and of course, if possible please provide the link to download that roms. Thanks.
Click to expand...
Click to collapse
I'm using JI1 Cooked ROM ....{ Cooked By MS Team }
it's cool
i'm using it for a while now..and i didn't find any bug in it yet..!!!
Looking alot here on XDA reading things about roms and such. But I wonder. If I would like to go back to the original rom (factory default), is that still possible? I only have this phone so I don't want to get stuck and having no phone at all.
Installing via Windows 7 machine
vphung said:
Hi chabahed
I was in the same boat few days ago. After doing some research in modaco, xda forum - I had succeeded in install energy rom (I install PDA part only) - Great ROM, i must say.
You can read more at modaco forum (sorry, can not post URL since I am new member)
I only worked on windows XP - It can be done on windows 7 but I had not tried it yet
- Require software to install you need:
ActiveSync installed (from microsoft webside)
Samsung_CDMA_modem_4_1_.34.zip
OCTANS_Mini.v2.11.exe
(see the modaco link for a link to download those software)
1. Insteall ActiveSync (if you had not done so)
2. Extract Samsung_CDMA_modem_4_1_.34.zip to a directory, and run the "setup.exe" in that directory to install the drive
3. Turn off your phone (push and hold on the right button of the cube button for a few seconds) - DO NOT USE THE RIGHT SIDE BUTTON (turn off screen only) - DO NOT CONNECT THE PHONE TO YOUR PC at this time
4. Run OCTANS_Mini
5. Click ".NB0" button to upload the PDA rom that you want to flash - Now the Detect button is enabled
6. Click Detect button
7. Now connect the phone to your PC using the supplied USB cable - the phone should be off as step 3 above.
8. Wait until OCTACT detect the phone - now the Start button is enabled
9. Click on the Start button to start flashing the ROM to you Omnia2 phone
10. Take a deep breath, drink a cup of coffee - Wait until the phone seft power on and start initializing
11. Enjoy your new shiny beautifull phone - (As I am with mine )
Click to expand...
Click to collapse
This is the way of installing within Windows XP but it will not work inside Windows 7.
Any ideea when PC only runs Win7?
Thanks & Regards,
hmm I'm trying this exact procedure in XP, w7-64, w7-32, in neither Pc is the program able to detect the phone.
I must add though that i had tried to do an update using KIEs. It hang in mid-upgrade.. and i had hopes that Octans could repair this bricked phone,
anyone else having this predicament?
Ihave flashed my omnia with vista 32 bit and windows 7 64 bit ...flashing with vista 32bit is easy but you need to update the vista driver...
For windows 7 64 bit you need to stop the stupid driver signature enforcement at the start of windows by pressing F8 during the bootloader or installing DSEO( Driver Signature Enforcement Overrider) which is a free application( and you can google it) to do that before updating the driver ...there is a specific driver for 32 bit and 64 bit in windows 7....I have attached vista driver and w7 23 and 64 drivers....
maybe somebody can help me.
i made some flash to my fone, no problem under w7. onde day trying a new flash, the mobile simply don't talk with my pc.
format c:\
install w7, install drivers, nothing happen.
format
instal xp, same procedure. nothing happen.
hard reset between flash ...
now i have the phone full of samsung, windows, and my provider trash.
something like 37 mb memory
and ..i can't charge my phone when is on, only when i turn it off he charge the baterry via usb or wall charger.
i have two cable.
if somebody have some suggestion idea, resolution.
tks
wat is d use of changing d ROM's?? im new here so pl help me
---------- Post added at 09:21 PM ---------- Previous post was at 09:15 PM ----------
can u also give me a direct link to install windows phone 7 onto omnia2?? i need help i searched a lot but i didnt find it can u pl help me??
[email protected] said:
wat is d use of changing d ROM's?? im new here so pl help me
---------- Post added at 09:21 PM ---------- Previous post was at 09:15 PM ----------
can u also give me a direct link to install windows phone 7 onto omnia2?? i need help i searched a lot but i didnt find it can u pl help me??
Click to expand...
Click to collapse
1.There is No Windows Phone7 for Omnia2
2.Read carefully post by member vphung
thx..
I have a serious problem i can't update my x2 at all.Because when i connect my phone to pc on normal way i can see my phone and storage card,win mobility working but when i restart phone on update mode and connect to seus,just only animation screen how can i connect and update my phone.
I tryed many ways to solve this problem but i have nothing.Anybody knows why my phone invisible to seus?
pls help, i need to update my phone.
i suppose your windows is vista or seven... to update without any problems try using xp... or try another compuer.
waiting for your answer.
you are right,my windows windows7 i have 2 computers both of them 7,i tryed also on winvista,ok i am going to find windows xp and try.
fire-warrior said:
i suppose your windows is vista or seven... to update without any problems try using xp... or try another compuer.
waiting for your answer.
Click to expand...
Click to collapse
unfortunatelly on windows xp also seus not working for updates
anybody could help me pls!
solved
problem solved,5th computer with win7 recognized all driver and seus worked,i changed my phone's language russian to english succesifully
to change language it is simple just copy what in cab file(extract first) than paste to windows folder,good luck
Hello. I have two consoles Gizmondo . First is a Gizmondo GZ020 (silver) - it's work fine.
I have problem with my second Gizmondo GZ021(black).
As everybody know console working on Windows CE 4.2
When i put power button Giz - I see a Gizmondo Wallpaper and screen is frozen .
But when i connect to my pc via active sync Windows XP see this device. I can run program from sd card via Gizmondo Control Center. But when i run update GIZ SPA or SPB it crash on update GPS ( GPS error update).
So i download trial of Microsoft Windows CE .net 4.2 Platform Builder.
I would like to update software via PC ( like phones HTC, Samsung etc.) but i dont have a application to update ROM ( from .bin file)
I have a second idea , to copy Rom image from GIZ020 and write do GZ021.
But i dont have idea how
Help me please.