Related
I have successfully flashed my Sprint THC hero with no problems.
My issue though is flashing the phone to 2.1d. i can't for the life of me follow these directions and I am really stumped on the process of doing a nandroid and flashing the ROM.
I downloaded the nandroid from this site but not sure where I put the directory with the files at. Can anyone break this process down into "ejpyle terminology"?
My problems are:
- where to copy the nandroid directory
- where to put the 2.1d ROM
- do i need this busybox that everyone is talking about?
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
gunnyman said:
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
Click to expand...
Click to collapse
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
ejpyle said:
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
Click to expand...
Click to collapse
DO NOT FLASH THE 2.1 Signed RUU Test ROM
OR I WILL FIND AND KILL YOU!
gunnyman said:
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
Click to expand...
Click to collapse
thanks man, if I win the power ball lottery I will be sending you all a private message.
one more quickie though, If Sprint releases the 2.1 before I become eligible for AARP will I have to flash back to the 1.5 version before updating my device with it?
Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
I hope the possible step left out above does not give me "another" bricked phone.
ejpyle said:
I hope the possible step left out above does not give me "another" bricked phone.
Click to expand...
Click to collapse
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
smw6180 said:
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Click to expand...
Click to collapse
Because you too seem like a decent person I will share this with you....
I followed a thread on here at the beginning of march to install a ROM and the directions (which I followed exact) bricked my phone. I spent hours reading up on this website to find out after the fact that the RUU might have a bug and some users will have issues. With that said, I decided to ask questions. This site has a lot of cleanup going on (no disrespect to anyone here as you are all VERY intelligent) and I do not think that someone as myself would be comfortable just "searching" for the answer without asking questions first with respect to the experience we have had in the past.
Kcarpenter said:
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
Click to expand...
Click to collapse
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
ejpyle said:
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
Click to expand...
Click to collapse
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Kcarpenter said:
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Click to expand...
Click to collapse
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
ejpyle said:
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
Click to expand...
Click to collapse
Ok, so this leads me to another question. Where is the thread that links to this download?
The reason I am worried about this file now that I see it:
It's only 942kb - WAY to small for a rom or nandroid.
gunnyman said:
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
Click to expand...
Click to collapse
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
ejpyle said:
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
Click to expand...
Click to collapse
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Kcarpenter said:
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Click to expand...
Click to collapse
I copied everything you indicated to my card. When I press HOME and PWR together I get a triangle with an exclamation point. Did this monkey not do something right?
Hey guys.
I've been attempting this all morning and so far I've had no luck. I have a VodafoneAU Legend which I updated to the official 2.2 yesterday. But now I want to try root.
I've been trying to follow the HBOOT 1.01 guide but there's a few problems. First, I cannot connect to the phone with adb unless it's in htc sync mode. No other mode will work. So when it's time to copy testimage.zip to the card I have to change from sync mode to disk mode, whereby adb loses it's connection. What do I do about this? Is it a driver problem (in Win7 here) or something else?
Thanks,
Dave.
Ok, the first problem were drivers.
Now I can't finish the second guide. When I try using clockwork to install the firmware.zip, the phone just boots to the red triangle. What do I have to do?
Dave.
So I pressed the up button/power combo at the red triangle and get the Android system recovery. Selecting "apply update.zip" says it can't verify. What do I do? Is this guide for my phone or do I need to follow something else?
I don't understand this guys. Anyone help? I'm thinking since this is a step to root the phone, I'm not actually rooted yet so I can't use the clockworkmod? Then what is the guide for? The guides at unlockr don't mention what firmware/hboot they work for so I'm not keen to try them yet.
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
whitetigerdk said:
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
But isn't that what Rom Manager does? Download the update.zip then run it? Man this is getting even harder to understand.
Edit: And this is left out of the HBOOT 1.01 guide because.....????? When I work this out I'll write a PROPPER guide, lol.
Just checked and update.zip is on the card.
So which part of the guide am I getting wrong?
Decided to reinstall phone with the official froyo release and am now ready to try this again. Is there anyone that will walk me through the process? I will write a complete guide if the "gotchas" are still there.
i feel for you ... hope you get it fixed... thats one of the reason i havent dared messing with the phone because i've seen a few post like yours where something didnt go quite as described... for whatever reason... and im sure the answer is out there but just not within the guide instructions... i guess there is no way to gather all gotchas because there are so many environment variables...
good luck
and please share your technique
Just saw gobczak's thread in the developer forum having similar troubles with Vodafone UK phone, getting the red triangle at reboot. I'll keep an eye on his thread and see how he goes with it.
Did you run the stage1 and stage2 bats while in recovery?
dezzadk said:
Did you run the stage1 and stage2 bats while in recovery?
Click to expand...
Click to collapse
No because the guide didn't say to.
The thing is it seems I'm only stuck on the part where the firmware.zip file has to be flashed. The guide says to use clockworkmod for this. But when I try installing the clockworkmod recovery it gives some file verification error. Isn't there ways to do this via the pc, either through those batch files, adb etc? Or will that fake-flash update.zip file work?
jabbado said:
No because the guide didn't say to.
Click to expand...
Click to collapse
As I just posted on the other forum, I think you need to skip that step in guide 2 and go straight onto guide 3 after you have flashed the LEGEIMG.zip, rebooted, and then removed LEGEIMG.zip from the SD card.
Guys I've got to the point of downgrading to 1.31. But when I run the first batch file it just hangs at the "Writing zip" part, with the htc logo on the screen. Is there any way to fix this?
Can someone please explain this part of the guide:
Phone will reboot and find LEGEIMG.zip on your sdcard, copy it into RAM and check it. If you get CID error at this point, then you don't have goldcard.
Click to expand...
Click to collapse
Ok, so I don't get an error. I get nothing. The phone just boots to the fastboot screen. If I press the power button it goes to the hboot screen and I can see the messages of loading LEGEIMG.zip. But the guide doesn't say to press anything.
So should I or shouldn't I press the power button? Also, if I try making the goldcard again, at which point in the guide do I start from again? The entire process or just copying LEGEIMG.zip to card then rebooting phone? I mean, will all the other things like flashing misc1-2.img still be there?
Guys I finally got this working.
The first problem was with the goldcards. For whatever reason formatting them with the win7 format tool just wouldn't work. I had to use the command-line format tool, setting the block size etc manually.
The second problem was the unnecessary steps in the guide. A few people helped me out with this (namely blackbart at the Aus Whirlpool forum), but basically in the second step you can stop after flashing the LEGEIMG.zip. The updating froyo part isn't needed - for my phone anyway.
Then when running the batch files in the third part, for whatever reason the first batch would keep hanging at 'writing zip...' and I needed to remove the battery to unfreeze the phone. flannigan, also from the Aus Whirlpool forums suggested to just go on to the second batch file. This worked!
So my Legend is now finally a true Legend
Anyway, thanks for the help everyone - couldn't have done this by myself.
Dave
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 / Stock Froyo to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Sent from my HTC Legend using XDA App
EpicSauce said:
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Click to expand...
Click to collapse
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Sounds good! Happy to help and add my 20c worth along the way. The existing guide has got the meaty bits, a new guide would cull the stuff not relevant, help fill in the gaps and alert to the pitfalls we've fallen into.
jabbado said:
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Click to expand...
Click to collapse
I agree... i've done my reading since june of last year but then didnt check for another 4 months... and so many how to's pop up with various ways of doing it depeding on the situation... a lot of those howtos were consolidated howtos which sometimes make intermediate steps unenecessary (may be in some cases causes more head aches since it didnt take into considerations on newer version of hboots...etc)... an updated how to will be much appreciated...
And you're right the most important pre requirement is to have a safety net ... so starting with how to create a back up in case you screw it up is a must!
but im glad it worked out for you!
so i just bought my nook color today and i have some questions, i was searching around in the android development forum and their were about 50 different methods of doing everything.
i am experienced with android and how to do anything just if somebody could post up links in an order i need to follow to be able to get CM7 on to it.
if possible flashing to nand would be preferable but if all we have is SD support thats okay too
thanks for the help guys
also i know i will likely get flamed for this thread but just know i am experienced with android and i have ran it on a non native device before (htc vogue).
My go-to link for flashing CM7 to the internal memory:
http://forum.xda-developers.com/showpost.php?p=11452450&postcount=19
thoughtlesskyle said:
i am experienced with android and how to do anything just if somebody could post up links in an order i need to follow to be able to get CM7 on to it.
if possible flashing to nand would be preferable but if all we have is SD support thats okay too
thanks for the help guys
Click to expand...
Click to collapse
You can get just about anywhere with the nook via two steps:
1) run autonooter for your software version (THIS is for 1.1, obviously for the other versions it will be a different thread)
2) use the market to download ROM Manager, then flash the CWM recovery and download 7.0.2 from the app (or pull a different CWM zip from the forums onto your card if you prefer) and flash.
Simple enough
EpicFail236 said:
You can get just about anywhere with the nook via two steps:
1) run autonooter for your software version (THIS is for 1.1, obviously for the other versions it will be a different thread)
2) use the market to download ROM Manager, then flash the CWM recovery and download 7.0.2 from the app (or pull a different CWM zip from the forums onto your card if you prefer) and flash.
Simple enough
Click to expand...
Click to collapse
thanks, i was reading it from the app so i missed the 2nd part about loading it to my sd card thanks for all the help guys im going to try this now
so i did the rom manager thing picked nook color (old) that might have been the wrong choice but now it wont boot past recovery it just keeps rebooting into recovery
also it wont allow me to flash anything it says i have the wrong prop=encore help somebody
okay got that fixed thanks to one of the tutorials on here (thank god thought i bricked it)
so cm7 is booting now how long does this thing take, mine has been going for like 10 minutes but its not like bootlooping is this just because the tablet builds are huge or do i have cause to be uneasy (nook builds like stock software def didnt take this long)
http://wiki.cyanogenmod.com/index.php?title=Barnes_&_Noble_Nook_Color:_Full_Update_Guide Just in case
First boot will take 5min+.
Nburnes said:
http://wiki.cyanogenmod.com/index.php?title=Barnes_&_Noble_Nook_Color:_Full_Update_Guide Just in case
First boot will take 5min+.
Click to expand...
Click to collapse
we are on like 20 minutes now
thoughtlesskyle said:
okay got that fixed thanks to one of the tutorials on here (thank god thought i bricked it)
so cm7 is booting now how long does this thing take, mine has been going for like 10 minutes but its not like bootlooping is this just because the tablet builds are huge or do i have cause to be uneasy (nook builds like stock software def didnt take this long)
Click to expand...
Click to collapse
This isn't your Hero!!! I don't think you can brick this thing.... The Nook always tries to boot from SD before internal memory!!! I had a hell of a time getting CM7 to load originally (at least 10+ minutes). Once you get it loaded, put away that SD card you burned the recovery image too.....Put a new SD card in, install Rom Manager, and flash recovery to it from Rom Manager. Once you get there you can Nand and flash stuff just like you do on your phone.
**Edit** If you get really jammed up, here's the thread on returning to stock unrooted B&N firmware, so you can start over....
http://forum.xda-developers.com/showthread.php?t=914690&highlight=return+stock
Hello, I am slowly learning how all of this works, and i have successfully rooted and custom ROMed my phones, and this is the first time I have tried a tablet. I have been trying to boot my Nook Color from sd card with CM7 and I got it to work great, except... I cannot get into a recovery. I even installed das uboot to choose where and how to boot, and it only takes me into a screen with a penguin and writes some code then wants to reboot. I have re done this several times, (I had the thing for 3 hours before I started trying, lol) I have no way to access recovery to install some changes I made to the ROm as Some Icons, animations, ect, I made on UOT. I have done this with my phone several times but this does not give me the option to do anything in recovery, No UI at all..
I was thinking of starting again, and wanted to know before I did if anyone here could give me a suggestion on what would be a good way to go or ROM to choose for a dual boot situation. I have seen on a thread that Dualboot Mirage CM7 / ICS CM9 ROM is a decent setup, but wanted to ask a few Nook users first.
Does this version let you go into recovery and flash things to the sd card ROM like changes and tweaks to the ROM ?
Would there be any better one to try?
Thanks for the answers in advance.
Chris
The screen with the penguin is verygreen's SASD "recovery" mode. To update to your "customized" ROM... name it update-WHATEVERYOUWANT.zip and copy it to the boot partition then go back into that recovery... it will install the updated ROM.
What you had seen was actually a Recovery mode.
Note: with verygreen's image, as soon booting into recovery mode, it will AUTOMATICALLY detect .zip files, install it/them, delete it/them then AUTO shut down.
Youre kidding me, right? I just had it named wrong? Im going to try again, I had the zip file from UOT on the boot partition, changed the name and it did something, but then had an error. Ill try loading the file again. I cant believe it was something so simple, and I have been asking over at CM and on the site where I followed the tutorial for a few days with no answers....
Any suggestions or comments about any other ROMS?
*edit* same error again, but at least it is doing it now! I can work with it now!!
line 1: syntax error: unexpected word (expecting ")")
Redneckhightech said:
Youre kidding me, right? I just had it named wrong? Im going to try again, I had the zip file from UOT on the boot partition, changed the name and it did something, but then had an error. Ill try loading the file again. I cant believe it was something so simple, and I have been asking over at CM and on the site where I followed the tutorial for a few days with no answers....
Any suggestions or comments about any other ROMS?
*edit* same error again, but at least it is doing it now! I can work with it now!!
line 1: syntax error: unexpected word (expecting ")")
Click to expand...
Click to collapse
Might have to edit the updater-script in META-INF\com\google\android of the ROM... I'd suspect the first line is not formatted correctly.
DizzyDen said:
Might have to edit the updater-script in META-INF\com\google\android of the ROM... I'd suspect the first line is not formatted correctly.
Click to expand...
Click to collapse
This is the first line.
ui_print("Applying UOT framework");
Is it supposed to be lowercase or is there a space supposed to be between print and the parenthesis?
Still new to the language but learning. I am on linux (ubuntu) now I self taught myself some of it with googles help! Im going to try mint on another computer soon as well.
Thanks,
Chris
That line looks to be right.. not sure what the issue is.
Noob, here. I have a small computer repair business and offered to take a look at a friend's A501. I am quite embarrassed to admit it, but I have searched through these (and other) forums and I am clueless. Due to my complete ignorance, I fear I may have made matters worse by becoming flash happy. Would anyone be able to give me *very* remedial instructions for what to try? I have no idea what the CUID is or how to obtain it, and I know nothing more about the machine than what I am able to extract by looking at it. Humbly, Anne
Let me add that I have searched and tried to follow the instructions on many other posts on this subject, I believe that haven't been successful because it seems that there is a prior knowlege/familiarity required with the OS/device that I don't have. Thanks again.
annenap said:
Noob, here. I have a small computer repair business and offered to take a look at a friend's A501. I am quite embarrassed to admit it, but I have searched through these (and other) forums and I am clueless. Due to my complete ignorance, I fear I may have made matters worse by becoming flash happy. Would anyone be able to give me *very* remedial instructions for what to try? I have no idea what the CUID is or how to obtain it, and I know nothing more about the machine than what I am able to extract by looking at it. Humbly, Anne
Let me add that I have searched and tried to follow the instructions on many other posts on this subject, I believe that haven't been successful because it seems that there is a prior knowlege/familiarity required with the OS/device that I don't have. Thanks again.
Click to expand...
Click to collapse
hehehe 'flash happy' welcome to the club!!! Yes the acer is a strange beast, luckily though its fairly 'unbrickable' unless your tab suffers from the hardware fault prob.
There are a couple of guides in my sig you should look at before attempting a fix.
The cpuid guide for a start, there are quite a few different ways of retrieving this - its all explained in the OP.
The root guide is a500 based, but everything will work for the 501 and has links to all the tools you will need
You don't say whats actually wrong with the tab - does it boot still, is there a custom recovery (power vol down buttons) on there and can you boot to that?
The more info you can give the easier it will be to provide the best solution
rgds donna
dibb_nz said:
hehehe 'flash happy' welcome to the club!!! Yes the acer is a strange beast, luckily though its fairly 'unbrickable' unless your tab suffers from the hardware fault prob.
There are a couple of guides in my sig you should look at before attempting a fix.
The cpuid guide for a start, there are quite a few different ways of retrieving this - its all explained in the OP.
The root guide is a500 based, but everything will work for the 501 and has links to all the tools you will need
You don't say whats actually wrong with the tab - does it boot still, is there a custom recovery (power vol down buttons) on there and can you boot to that?
The more info you can give the easier it will be to provide the best solution
rgds donna
Click to expand...
Click to collapse
Hi Donna-
Yeah, I guess explaining what it's doing might be helpful. Right now, if I just power it up, the acer logo is in the center and in top left corner is "boot verified failed" in red.
Power + vol up, displays in the top left corner:
erasing cache before sd update
sd update cmd: recovery
update package=sd card update.zip
booting recovery kernel image
then it shows the android guy working then the android guy dead
I'll take a stab at determining the CPUID tomorrow.
Thanks again.
annenap said:
Hi Donna-
Yeah, I guess explaining what it's doing might be helpful. Right now, if I just power it up, the acer logo is in the center and in top left corner is "boot verified failed" in red.
Power + vol up, displays in the top left corner:
erasing cache before sd update
sd update cmd: recovery
update package=sd card update.zip
booting recovery kernel image
then it shows the android guy working then the android guy dead
I'll take a stab at determining the CPUID tomorrow.
Thanks again.
Click to expand...
Click to collapse
EDIT: I'm just uploading a 501 update.zip - the 500 will work ok you just won't have 3G
I'll post a link when its done
ok you might be able to get fixed by heading to the root guide in my sig.
download the 3.1 FULL update.zip - rename it to update.zip and make sure it doesn't end up as update.zip.zip
Copy it to your external sd card
Start the update by Pwr and vol up
If it works your tab will be back on HC 3.1
Grab your CPUID - its the easiest way
From there you can get system updates all the way to ICS OR
Install the v8 bootloader to flash any ICS/JB roms
If it doesn' work you will need that CPUID
Good Luck m8!!
rgds donna