How do I format the SD card as Ext4 and then make a partition of about 750mb on it?
If you have a card reader you could just boot your computer with linux (live cd or usb stick) and use linux tools (gparted etc) to partition the card.
Daz555 said:
If you have a card reader you could just boot your computer with linux (live cd or usb stick) and use linux tools (gparted etc) to partition the card.
Click to expand...
Click to collapse
Do I need a card reader, I put my phone in Disk Drive and then tried gparted but it couldnt find it, Il try a card reader tonight!
You can actually just connect via USB. Then right click on it in Linux and chose Format. Then go into the advanced options. (I use Ubuntu and have used LinuxMint in the past)
vious21 said:
You can actually just connect via USB. Then right click on it in Linux and chose Format. Then go into the advanced options. (I use Ubuntu and have used LinuxMint in the past)
Click to expand...
Click to collapse
Ok thanks ive partitioned it, now how do I get all my apps onto my partition lol!
How about using windows platform? How to partition in ext4?
c_shekhar said:
How about using windows platform? How to partition in ext4?
Click to expand...
Click to collapse
Just boot Gparted Live from a usb or something.
Repsys7 said:
Ok thanks ive partitioned it, now how do I get all my apps onto my partition lol!
Click to expand...
Click to collapse
If the rom you're using supports A2SD (every rom doesn't) there's probably instructions in the thread for that. Here's from LeeDroid's thread:
LeeDroid said:
Q: What is A2SD+
A:
A2SD+ Moves your apps & Dalvik cahche to a hidden EXT partition on your MicroSD
You will be required to format you SD card with 2 partitions as laid out below
How do i set up my MicroSD ready for A2SD+
A:
Backup all data on you SD card (this will be Formatted)
The card should be formatted with your standard FAT32 partition 1st followed by an EXT3 partition (I would recommend a minimum 512mb)
Linux users use GParted or a similar software.
For everyone else I would recommend using Rom Manager or CWM
Once you have downloaded ROM manager from the market, open the app and click partition SD Card, Select your EXT size and set 0mb for swap
Restore your data to your SD.
Flash the A2SD+ Patch
Boot << Please be aware, 1st boot may take a while depending on how many apps you have installed.
Click to expand...
Click to collapse
Hawks556 said:
If the rom you're using supports A2SD (every rom doesn't) there's probably instructions in the thread for that. Here's from LeeDroid's thread:
Click to expand...
Click to collapse
Thanks! Im using RCMix3D at the moment, im not sure if it has A2SD though, if it doesnt is there a way to get it like just flashing it or something?
Repsys7 said:
Thanks! Im using RCMix3D at the moment, im not sure if it has A2SD though, if it doesnt is there a way to get it like just flashing it or something?
Click to expand...
Click to collapse
As I said, every rom doesn't support A2SD and those who do have it probably mentioned in the OP of the rom thread (RCMix3D doesn't atm). You can't add A2SD support by flashing, you can only flash the A2SD patch to a rom that supports it.
Hawks556 said:
As I said, every rom doesn't support A2SD and those who do have it probably mentioned in the OP of the rom thread (RCMix3D doesn't atm). You can't add A2SD support by flashing, you can only flash the A2SD patch to a rom that supports it.
Click to expand...
Click to collapse
Oh alright then, Il have to find another way to get apps to sd I guess!
Thanks for your help!
Excuse me for going off-topic a bit
But why are there so many people focused on moving every application to the SD card?
It can't be for the space... I just counted and I have 70 apps installed on my internal memory, using 274 MB with 883 MB free.
I just don't get it?
co2-guy said:
Excuse me for going off-topic a bit
But why are there so many people focused on moving every application to the SD card?
It can't be for the space... I just counted and I have 70 apps installed on my internal memory, using 274 MB with 883 MB free.
I just don't get it?
Click to expand...
Click to collapse
I dont know about other people but for me, there is a new rom out every day and full wiping makes sure nothings wrong and if the apps are on the SD then its just easier you dont have to worry about losing your apps
But always you can use Titanum Backup to backup your apps.
Hmm.. So, ext4... For what? I know, ext4 is newest than ext3, but performance ext4>ext3 or for what?
suroegin said:
Hmm.. So, ext4... For what? I know, ext4 is newest than ext3, but performance ext4>ext3 or for what?
Click to expand...
Click to collapse
ext4 is the same as ext3, but has journalling initialised that makes it more fault tolerant. Don't take my word for it read me here
Dod6 said:
But always you can use Titanum Backup to backup your apps.
Click to expand...
Click to collapse
But if I do that when I restore it do I still get my progress in apps, like where im up to and stuff?
Repsys7 said:
But if I do that when I restore it do I still get my progress in apps, like where im up to and stuff?
Click to expand...
Click to collapse
Yes, as long as you backup and restore apk + Data for the required apps
ghostofcain said:
Yes, as long as you backup and restore apk + Data for the required apps
Click to expand...
Click to collapse
Oh I didnt know that, how do I do that?
Related
Hello XDA,
Can anyone instruct me on how i would go about disable Apps2SD on my Cyanogen 2.7.1 Mytouch3g? Thanks.
By posting in the Q&A
But follow the guy below me's answer. Meant to put that to not seem like a butt, but forgot
If you don't have a partitioned sd card it will be disabled. Just have one partition (fat32) and viola, no apps2sd
perhaps a way to disable without having to re-partition an sdcard (currently using apps2sd) would be helpful?
iKse said:
perhaps a way to disable without having to re-partition an sdcard (currently using apps2sd) would be helpful?
Click to expand...
Click to collapse
Format your ext2 partition as fat32.
st0kes said:
Format your ext2 partition as fat32.
Click to expand...
Click to collapse
Is there a way to move the apps of the partition first? Just mv everything into /system/data?
perbu said:
Is there a way to move the apps of the partition first? Just mv everything into /system/data?
Click to expand...
Click to collapse
exactly what i wanted to ask...
Any help with this?
You could try removing them all from the SD card and just install them using a batch file, any data that was created should still be on there as you just removed the .apk and they won't be modified. And to format the SD card, easiest way I know how is just flash AmonRa's recovery image and use the option in there, but before you do, take all the files off of your SD card.
hi guys i have been searching the forums for tutorial on how to properly partition your sd card and your phone to use a swap partition for swapper. i heard it allows speed up performance for the phone while using some apps. can anyone pls help me with this. i just want a better performing GT540. thanks in advance
I'd be interested in a tutorial for this as well.
Thanks
Most opperating systems have a built in manager for it, including windows. Look on YouTube, that's how I did mine.
Or use clockworkmod.
lukemovement1 said:
Most opperating systems have a built in manager for it, including windows. Look on YouTube, that's how I did mine.
Or use clockworkmod.
Click to expand...
Click to collapse
On windows you can create partitions but swap belongs to linux so unless you use a ubuntu live CD or a machine with ubuntu...
Veronica
lavero.burgos said:
On windows you can create partitions but swap belongs to linux so unless you use a ubuntu live CD or a machine with ubuntu...
Veronica
Click to expand...
Click to collapse
A ext2 partitions is the same on all operating system
Clockworkmod will also partition you sdcard
So i just create an ext2 partition on my sd? Then what's next?
Sent from my GT540 using XDA Premium App
Back ur memory card up first. Depending what size memory card you have depends on the size of the partition
The most you will need is 2gb, I would only us 500mb.(2gb sdcard)
You need to have a fat32 partition for your normal data and the ext2 for the swap file. Then just put it back in you phone.
BTW I lost my last memory card trying to unpartition it. So if you only want 1 extra paelrtition use clockworkmod.
NEXT STEP
lukemovement1 said:
back ur memory card up first. Depending what size memory card you have depends on the size of the partition
the most you will need is 2gb, i would only us 500mb.(2gb sdcard)
you need to have a fat32 partition for your normal data and the ext2 for the swap file. Then just put it back in you phone.
Btw i lost my last memory card trying to unpartition it. So if you only want 1 extra paelrtition use clockworkmod.
Click to expand...
Click to collapse
after this, how can i configure swapper 2??
Thanks in advance
I think you tick a box. Download swapper2 from the market place, one of them has more options than the other
When I try to use A2SD commands I get "darktremor apps2sd may not have ran during boot cannot read a2sd.mountpoint"
Its saying my sd partition is not mounted, and no apps have moved to sd card
please help guys!
Have you partitioned your SD card correctly so that it works with a2sd?
Daz555 said:
Have you partitioned your SD card correctly so that it works with a2sd?
Click to expand...
Click to collapse
I think so, I partitioned it Ext4. what else do I have to do?
Please list the exact partition config you have on your SD card. That way we'll hopefully be able to see the problem. Also please tell us which ROM you are using.
Daz555 said:
Please list the exact partition config you have on your SD card. That way we'll hopefully be able to see the problem. Also please tell us which ROM you are using.
Click to expand...
Click to collapse
Ok I have an Ext4 745.20mb partition with 28mb used (I dont know what its used on)
Im using RCMix3D but I installed the A2SD script and I know its working because I can use A2SD Commands!
Repsys7 said:
Ok I have an Ext4 745.20mb partition with 28mb used (I dont know what its used on)!
Click to expand...
Click to collapse
Sorry, you have an SD card with a single 745MB ext4 partition?
Can you post your exact SD card partition info - all partition sizes, file systems, and in what order they are partitioned.
Also, your ROM - have you asked this question in the relevant thread?
Daz555 said:
Sorry, you have an SD card with a single 745MB ext4 partition?
Can you post your exact SD card partition info - all partition sizes, file systems, and in what order they are partitioned.
Also, your ROM - have you asked this question in the relevant thread?
Click to expand...
Click to collapse
Sorry what I meant was my first partition was 6.69gb and Fat32, Then I partitioned 750mb off as Ext4.
Data first and then A2SD partition second is usually the right way around but I am not familiar with your ROM. For example, does it support EXT4?
Might be worthing popping over to the thread for your ROM in the Development forum and asking around there.
Daz555 said:
Data first and then A2SD partition second is usually the right way around but I am not familiar with your ROM. For example, does it support EXT4?
Might be worthing popping over to the thread for your ROM in the Development forum and asking around there.
Click to expand...
Click to collapse
Yeah I did data first, and yeah it does support EXT4.
The rom doesnt actually have A2SD in it, but I put it in myself so its probably no use asking in the rom thread.
I've tried everything, I've partitioned it on linux, gparted, minitool partion on windows, Clockwork recovery, none work.
Thanks for your help anyway!
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
ejebyte said:
Hi guys,
I've installed a CM7 ROM then installed S2E, then flashed an AOSP build to replace it. When I try to use S2E to move the apps back to NAND from sd-ext, it shows up in NAND in the first couple of boots, but later on goes back to sd-ext without S2E doing the job. I kinda figured that it's built into the ROM to move the apps to sd-ext.
What would be the safest way to move the apps from sd-ext back to /data/app, and then repartition my SD card into a single partition and use its whole storage capacity?
Thanks in advance!
Click to expand...
Click to collapse
try link2sd in the market,it's free,but once you've moved all u want to,boot into recovery and wipe cache partition and wipe dalvik,that MIGHT do the trick
one question, how do you want to partition your sd? i mean one fat or one ext partition? But seriously, one partition is a bad idea, i wouldnt recommend that.
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Ty5982 said:
Partition ur sd card in recovery with 1gb and swap size 64mb,THEN,open link2sd and when u 1st open it,it checks your phone and sd card then prompts u were u want to send apps to,ext 2,3,4 or FAT 32,select FAT 32 as its what u want,then a error msg will appear,reboot,then open link2sd and now you've got your fat 32 lol
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
Click to expand...
Click to collapse
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
jwchips said:
Won't that have moved his apps to a fat32 partition?
If I'm reading this correctly what the OP wants is to move his apps to NAND so he can format his sd card to its full capacity in FAT32, presumably so he can use it as a normal SD card (eg for a camera, moving files etc)
I personally use a very popular app called DarkTremors Apps2SD GUI, it comes preinstalled on a lot of custom ROMS. This app checks where your apps are when you launch it, and gives you the option to either move them to SD-EXT or back again. Launch APPS2SDGUI, let it check your system, then click 'Apps are on SD!' to move them back to NAND.
P.S. I don't think you can wipe the SD-EXT partition off the SD card using Windows' built-in formatter. There are lots of freeware apps that can and will do this though, google is your friend =]
Click to expand...
Click to collapse
@Ty5982, unfortunately it didn't work. It went badly and I lost the apps in sd-ext so I ended up restoring them..
@jwchips, thanks! Will try that one instead. Yep, I've read about the tools/apps that can be used to partition/format storage devices with EXT. Thanks again.
ejebyte said:
@Ty5982, Thanks for the input! Will try that later.
@greg17477, I'm using Windows so I want to format it to a single Fat32 partition. What's your recommendation?
Click to expand...
Click to collapse
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
greg17477 said:
well i would recommend tu have 2 partitions, ext and fat. Just to be safe or prapared in case your want to try a different rom. Nowadayes almost every rom uses ext partition. And you won't run out of space, if you install some more apps.
Click to expand...
Click to collapse
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
ejebyte said:
I see. Thanks! Currently I have a 512MB EXT partition on my SD card. I thought I'd be able to choose which apps to move there but it seems my ROM automatically symlinks the apps installed to the EXT partition.
So I decided I want to just install the apps to NAND since I don't really install a lot of apps and I'm using a TMOUS HD2, just for an extra boost in performance compared to when apps are installed to SD-EXT. Then I'll just selectively move apps to SD.
Click to expand...
Click to collapse
ah ok, on TMOUS HD2 you might do not need an ext partition
greg17477 said:
ah ok, on TMOUS HD2 you might do not need an ext partition
Click to expand...
Click to collapse
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
ejebyte said:
That's what I've figured..
I might just back-up everything then re-flash and repartition my phone and SD card. Anyway, thanks everyone!
Click to expand...
Click to collapse
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
colinmc8 said:
Hi, I hope you guys are still around, I´ve been looking for an answer and can´t find anything, heres the question I posted on another thread:
I´ve been having trouble with my phone freezing even after full wipes, so I´ve come to the conclusion my sdcard is corrupt.
So I want to go through the Gparted process to format and re-partition my sdcard.
Currently I have 16GB class 6, which has the recommended FAT32 and 1GB ext4.
Is it safe (or even possible) to format the sd card now. I tried with Gparted and only the FAT32 partition showed up???
The rom is runnymede aio which requires the ext4
Thanks
Click to expand...
Click to collapse
be sure to format both partitions as primary.
Hello guys,
I installed this particular rom on my HD2: http://forum.xda-developers.com/showthread.php?t=2224469
The installation completes succesfully but when I reboot it stucks on a black screen. Using MAGLDR and CWM, in the installation I chose NAND installation type. Is there maybe anything I do wrong?
Thx in advance
KIdDarkness said:
Hello guys,
I installed this particular rom on my HD2: http://forum.xda-developers.com/showthread.php?t=2224469
The installation completes succesfully but when I reboot it stucks on a black screen. Using MAGLDR and CWM, in the installation I chose NAND installation type. Is there maybe anything I do wrong?
Thx in advance
Click to expand...
Click to collapse
You chose ONLY Nand? You must have enough system partition. What device do you have? (Eu or Tmo) and what is your partitioning?
Marvlesz said:
You chose ONLY Nand? You must have enough system partition. What device do you have? (Eu or Tmo) and what is your partitioning?
Click to expand...
Click to collapse
I have EU device and my partitioning was 190kb if my memory serves me well coz I've been updating my roms since March 2012 ;/ (1 year now)
KIdDarkness said:
I have EU device and my partitioning was 190mb if my memory serves me well coz I've been updating my roms since March 2012 ;/ (1 year now)
Click to expand...
Click to collapse
You should use DataOnExt. Create an ext partition on your sdcard and reinstall the ROM with the installation option "Nand with DataOnExt" chosen. And you should be good to go.
Marvlesz said:
You should use DataOnExt. Create an ext partition on your sdcard and reinstall the ROM with the installation option "Nand with DataOnExt" chosen. And you should be good to go.
Click to expand...
Click to collapse
Ok thx a lot.. huhmm, how am I gonna create the partition? And if my memory serves me right it must be FAT32 format right?
You can follow this great tutorial by mengfei up to the point where he says "Another method of creating an EXT4 partition". (don't forget to thank him)
Edit: Your memory failed you , it must be an ext2/3/4. (In addition to your original FAT32)
Marvlesz said:
You can follow this great tutorial by mengfei up to the point where he says "Another method of creating an EXT4 partition". (don't forget to thank him)
Edit: Your memory failed you , it must be an ext2/3/4. (In addition to your original FAT32)
Click to expand...
Click to collapse
If the pc doesn't have an input for the sd card, should I use the second method?? Is it reliable as well?
KIdDarkness said:
If the pc doesn't have an input for the sd card, should I use the second method?? Is it reliable as well?
Click to expand...
Click to collapse
I used the second method (well, CWM not TWRP) to partition my SD and it's always worked perfectly well.
Nigeldg said:
I used the second method (well, CWM not TWRP) to partition my SD and it's always worked perfectly well.
Click to expand...
Click to collapse
That comes really handy.. How did u partition it with CWM?
KIdDarkness said:
That comes really handy.. How did u partition it with CWM?
Click to expand...
Click to collapse
If I'm not mistaken it's almost exactly the same as in mengfei's guide. Just boot into AD Recovery from MAGLDR, select Advanced then partition SD card. Choose whatever size you like (if you're not sure then 1GB is always a good safe option) and usually you won't have need for a swap partition so select 0 here. This will delete all of the data on your SD card though so make sure to back anything important up first.
Nigeldg said:
If I'm not mistaken it's almost exactly the same as in mengfei's guide. Just boot into AD Recovery from MAGLDR, select Advanced then partition SD card. Choose whatever size you like (if you're not sure then 1GB is always a good safe option) and usually you won't have need for a swap partition so select 0 here. This will delete all of the data on your SD card though so make sure to back anything important up first.
Click to expand...
Click to collapse
Ofc it has a selection for an EXT4 partition as well right?
KIdDarkness said:
Ofc it has a selection for an EXT4 partition as well right?
Click to expand...
Click to collapse
I actually don't remember having to select ext3 or 4 when installing but normally it doesn't make too much difference as far as I know.
Nigeldg said:
I actually don't remember having to select ext3 or 4 when installing but normally it doesn't make too much difference as far as I know.
Click to expand...
Click to collapse
Ok, and as long as I do partition the sd card it will obviously need to copy the .zip of the ROM again onto the sd card correct?
KIdDarkness said:
Ok, and as long as I do partition the sd card it will obviously need to copy the .zip of the ROM again onto the sd card correct?
Click to expand...
Click to collapse
Yeah, the best way to do it is using an SD card reader but since you don't have that using USB mass storage or the option in cwm should be fine.
KIdDarkness said:
Ok, and as long as I do partition the sd card it will obviously need to copy the .zip of the ROM again onto the sd card correct?
Click to expand...
Click to collapse
That process is likely to format your sdcard, so MAKE SURE you have backed up everything. That means you'll also have to recopy the .zip file of the ROM.
Ok, so thx each one of u for the help, rly appreciate it Thx a lot guys