Related
Let me preface my question with some info:
I have tried the limited viability market fix detailed in the ManualNooter 4.5.6 no less than 10 times.
I have gone back to stock, side loaded 1.2, and did a complete redo of manualnooter (I followed every single word in every single step to a "T", BOTH times.
I saved, then uninstalled, and reloaded the market from Titanium.
I am not a complete noob (and by that I mean, I am not a natural at adb commands).
I have rooted an Eris, I have used autonooter, I have rooted my Incredible.
I have been reading through posts on XDA and other sites for 3 days.
I absolutely positively cannot fix the limited visibility problem with the Market.
Can anyone give me any guidance?
Is anyone else having this problem but me?
Thanks for your time!
lcoughlin said:
Let me preface my question with some info:
I have tried the limited viability market fix detailed in the ManualNooter 4.5.6 no less than 10 times.
I have gone back to stock, side loaded 1.2, and did a complete redo of manualnooter (I followed every single word in every single step to a "T", BOTH times.
I saved, then uninstalled, and reloaded the market from Titanium.
I am not a complete noob (and by that I mean, I am not a natural at adb commands).
I have rooted an Eris, I have used autonooter, I have rooted my Incredible.
I have been reading through posts on XDA and other sites for 3 days.
I absolutely positively cannot fix the limited visibility problem with the Market.
Can anyone give me any guidance?
Is anyone else having this problem but me?!
Click to expand...
Click to collapse
I did the same and had no problems. Try the new MN 4.5.18 and post your results. Did you add any apps, kernels? What was installed prior to going back to stock BN and which version of BN? Did you overclock or dual boot?
fpga_guy said:
I did the same and had no problems. Try the new MN 4.5.18 and post your results. Did you add any apps, kernels? What was installed prior to going back to stock BN and which version of BN? Did you overclock or dual boot?
Click to expand...
Click to collapse
Before doing Manualnooter, I wiped the device as per the directions (8 failed reboots, and factory reset, in that order...again, as per directions)
I did not add any apps (aside what was loaded natively via the manualnooter process before trying the market either time.
I have never overclocked, or dual booted my Nook.
From stock 1.1, I used autonooter to root. I never installed any ROMs. From that state, I unrooted, and rerooted with Manualnooter following ALL of the directions (including making the bootable sd with CM), and again, never loaded any custom ROMs.
Before I rooted, I had a pretty good number of apps loaded both from the market, and side loading. I never messed with the Nook too much (no tasker, no tether, never tried to get bluetooth working, and nothing where I had to alter any lines of code.
I'm at work right now, so unable to try 4.5.18 at the moment. When I have a chunk of time, I will try the entire process over again with 4.5.18 from complete scratch (including redoing the bootable sd, wiping with 8 interrupted boots, and factory reset, etc)
I will report back.
Thanks!
Lynn
Did you remember to register the device following the wipe? Seems the device needs to be registered prior to rooting.
I started with a stock Nook and rooted it, then 1.2 came out.
My sequence was to flash with 1.2 with CWM peinstalled. Then I rebooted and registered the device on gmail and Youtube.
Next I downloaded manual nooter and put in root of sd.
Rebooted to recovery and flashed manual nooter. booted and tested, installed Nook apps, then rebooted into recovery.
From recovery I flashed the kernal fix to allow moving apps to SD. Tested Works!
The ONLY remaining issue I have is that some large apps are not found in market.
Market was fixed!, had to clear market cache, then kill it, then cleared data for the google frame work part and killed it. Rebooted and now see many more apps, especially the larger ones. This info is near end of first post; http://forum.xda-developers.com/showthread.php?t=1054027
framitz said:
Did you remember to register the device following the wipe? Seems the device needs to be registered prior to rooting.
I started with a stock Nook and rooted it, then 1.2 came out.
My sequence was to flash with 1.2 with CWM peinstalled. Then I rebooted and registered the device on gmail and Youtube.
Next I downloaded manual nooter and put in root of sd.
Rebooted to recovery and flashed manual nooter. booted and tested, installed Nook apps, then rebooted into recovery.
From recovery I flashed the kernal fix to allow moving apps to SD. Tested Works!
The ONLY remaining issue I have is that some large apps are not found in market.
Click to expand...
Click to collapse
framitz,
I don't think I did. I don't remember doing that step at that point. And, I looked back over the directions I followed, and I didn't see that as a step. And I followed those directions like I needed to diffuse a bomb.
I'll follow your instructions when I get home, and let you know!
Thanks!!
lcoughlin said:
From stock 1.1, I used autonooter to root. I never installed any ROMs. From that state, I unrooted, and rerooted with Manualnooter following ALL of the directions (including making the bootable sd with CM), and again, never loaded any custom ROMs.
Click to expand...
Click to collapse
Instead of unrooting, etc.. just install BN1.2 from http://forum.xda-developers.com/showthread.php?t=1050520. I suggest using update-nc-stock-1.2-signed.zip.
From there MN should work fine...
My first MN followed the same process as yours (restore to stock, side load BN1.2). Subsequently, I used the nemith method.
fpga_guy said:
Instead of unrooting, etc.. just install BN1.2 from http://forum.xda-developers.com/showthread.php?t=1050520. I suggest using update-nc-stock-1.2-signed.zip.
From there MN should work fine...
My first MN followed the same process as yours (restore to stock, side load BN1.2). Subsequently, I used the nemith method.
Click to expand...
Click to collapse
I used update-nc-stock-1.2-keepcwm-signed.zip, which has the advantage of not needing to set up a bootable SD because CWM is already available.
To flash a new rom I just boot into recover, locate and install the zip file.
Battling Market Downloads with MN 4.5.6
Originally Posted by framitz>
My first MN followed the same process as yours (restore to stock, side load BN1.2). Subsequently, I used the nemith method.
I used update-nc-stock-1.2-keepcwm-signed.zip, which has the advantage of not needing to set up a bootable SD because CWM is already available.
To flash a new rom I just boot into recover, locate and install the zip file.
Click to expand...
Click to collapse
I did exactly this, then used MN 4.5.6 and had the same problem with "download unsuccessful" with the market. I was able to fix the limited market problem easily, but couldn't find a solution to the Market download problem.
Tired of beating my head against the wall at this point. Reverting back to my original ROM.
I am a noob and recently rooted my NC, which was on B&N firmware version 1.2, with Manual nooter 4.6.16. It was working fine. I was able to access Market and download and install apps. However, today I discovered that the B&N firmware had been updated to 1.3 overnight while I had my NC plugged in for charging. Some of my previously installed android apps are still working, but now I no longer have access to market. Can I re-install Manual nooter 4.6.16 on my 1.3 NC and regain access to Market?
Manual nooter works for NC 1.3
Based on some other threads, I went and re-installed Manual nooter 4.6.16 on my 1.3 updated NC via CWM, and it appears to be working just fine. Market and google apps are back. Apps that I had moved to my SD card, which I was unable to see when the NC was updated to 1.3, were once again visible and able to be used. I was even able to overclock the cpu to 1.2GHz by downloading update-Froyo1.2-dalingrin-OC-063011.zip, and then running SetCPU, which I downloaded from Market. At the moment, all is well with the world.
gbmungan said:
Based on some other threads, I went and re-installed Manual nooter 4.6.16 on my 1.3 updated NC via CWM, and it appears to be working just fine. Market and google apps are back. Apps that I had moved to my SD card, which I was unable to see when the NC was updated to 1.3, were once again visible and able to be used. I was even able to overclock the cpu to 1.2GHz by downloading update-Froyo1.2-dalingrin-OC-063011.zip, and then running SetCPU, which I downloaded from Market. At the moment, all is well with the world.
Click to expand...
Click to collapse
There's an updated OC kernel for 1.3 if you want to update to it.
To the OP - there doesn't seem to be a standard answer. For some, it's simply a matter of reapplying MN. For others (like me), I had to apply MN 4-5-18 first and then MN 4-6-16, for some strange reason.
Another question: how does one enable installation of non-market apps in 1.3 (rooted as per above)? I can't seem to find a chechbox menu in settings.
Did you check under Development in Settings?
Root nook working after 1.3 push with 4-5-18 and 4-6-16
Thanks for the tip about 4-5-18, then 4-6-16. I still had 4-6-16 on my SD card and ran that after 1.3 was installed and the market still didn't work.
I also discovered, which I'm sure the experience folks here already know, that I couldn't apply, 4-5-18, then apply 4-6-16. I had to apply 4-5-18, reboot, log in with my gmail ID. Then shutdown and apply 4-6-16. All is well now.
Interesting part of all this for me, was that 1.0.1 was the only install that's been pushed to my NC. Ever since then I've expected them to push and break it, but despite being on wifi all the time at home, 1.1, and 1.2 were never pushed automatically. I was beginning to think BN wasn't pushing to rooted nooks. Oh well, learned the truth with this push, but thanks to the posts here, not a big deal.
morgman said:
I also discovered, which I'm sure the experience folks here already know, that I couldn't apply, 4-5-18, then apply 4-6-16. I had to apply 4-5-18, reboot, log in with my gmail ID. Then shutdown and apply 4-6-16. All is well now.
Click to expand...
Click to collapse
Yep. I know that's in the instructions I posted on the general board. Not sure exactly if it's in the MN thread or not... But thanks for reinforcing the point for others!
skeeterpro said:
Did you check under Development in Settings?
Click to expand...
Click to collapse
I did, and still don't see a chechbox toggling the install of non market apps. Is it "allow mock locations"?
Non Market Apps
You should be able to check for non market apps by running the Nook Color Tools. On my manual nooted 1.3, I discovered that the check box was there, but the label was not. (It was there under 1.2). The manual nooter is supposed to set the check box, but I had problems initially. I fixed the problem by unchecking the box, rebooting and rechecking the box (probably overkill, but it worked).
Hope this helps.
Guess I spoke too soon. My NC worked after 4-5-18 then 4-6-16, but after downloading a couple flash card apps, its back to the old behavior. Market closes immediately on open - is broke again. I'll rerun the installs, but wonder if other folks have seen this.
NormLondon said:
You should be able to check for non market apps by running the Nook Color Tools. On my manual nooted 1.3, I discovered that the check box was there, but the label was not. (It was there under 1.2). The manual nooter is supposed to set the check box, but I had problems initially. I fixed the problem by unchecking the box, rebooting and rechecking the box (probably overkill, but it worked).
Hope this helps.
Click to expand...
Click to collapse
Thanks - if only I could boot back into 1.3 - as after rebooting I am stuck at the rainbow Nook dev splash screen It seems my boot became corrupted, so I used CWM 3.0.2.8 SD to factory wipe and restore a nandroid backup made before everything crapped out - to no avail, still am stuck at the same splash screen after restoring. Followed all the instructions: installed 1.3, manual nootered x 2, fixed permissions... rooted stock just doesn't seem to agree with my Nook. Will go back to running CM7 off SD.
dohturdima said:
Thanks - if only I could boot back into 1.3 - as after rebooting I am stuck at the rainbow Nook dev splash screen It seems my boot became corrupted, so I used CWM 3.0.2.8 SD to factory wipe and restore a nandroid backup made before everything crapped out - to no avail, still am stuck at the same splash screen after restoring. Followed all the instructions: installed 1.3, manual nootered x 2, fixed permissions... rooted stock just doesn't seem to agree with my Nook. Will go back to running CM7 off SD.
Click to expand...
Click to collapse
You rebooted after each step right? 1.3 -reboot - MN 4.5.18 - reboot - MN 4.6.16 - reboot - fix permissions.
doncaruana said:
Yep. I know that's in the instructions I posted on the general board. Not sure exactly if it's in the MN thread or not... But thanks for reinforcing the point for others!
Click to expand...
Click to collapse
I ran the 4-5-18 and when it said complete I ran 4-6-16. I rebooted and it works as advertised. Am I going to have some issues pop up later? I am able to install apps from the market and do everything I normally do. I could not find the setting regarding allowing non market apps. I was going to go through all the settings, but I couldn't figure out how to make the tool return to the main page once I viewed a particular setting. There was no return function that I could figure out.
brlarue said:
I ran the 4-5-18 and when it said complete I ran 4-6-16. I rebooted and it works as advertised. Am I going to have some issues pop up later? I am able to install apps from the market and do everything I normally do. I could not find the setting regarding allowing non market apps. I was going to go through all the settings, but I couldn't figure out how to make the tool return to the main page once I viewed a particular setting. There was no return function that I could figure out.
Click to expand...
Click to collapse
The non-market setting is the check box with no label at the top of the page when you open nook color tools. If it's checked, uncheck it, then check it again. And no there isn't really a return.
As far as whether you'll have issues - no telling. I had just posted what had worked for me. If it's working, you're in good shape for now.
doncaruana said:
There's an updated OC kernel for 1.3 if you want to update to it.
Click to expand...
Click to collapse
Where do I get this update?
Thanks!
Crissynak
manual nooter rocks
Installed with 1.3 and it does everything...except restart without hanging.
Anyone know a fix?
bassbrass said:
Installed with 1.3 and it does everything...except restart without hanging.
Anyone know a fix?
Click to expand...
Click to collapse
Have you found / read this thread? Might help you with boot loops...
How to avoid the nook boot loop problem before or after Adobe auto-updates
http://forum.xda-developers.com/showthread.php?t=1308304
before I start I really did search for days before... (>_<)
I have a Nook Color Stock 1.3
I follow the Directions from [NC][1.2][1.3] ManualNooter 4.6.16
I get the boot Loop when I install MN 4.6.16 and 4.6.16a
When I install 4.5.18, whenever I try to search the nook store I get an Error "A Problem Occurred"....
So I at the moment I have a (nook color 1.3/ MN 4.5.18) that wont let me search the nook store Dose anyone know how to fix the store or know how I can get the 4.6.16/a to not get a boot loop on me?
If you followed this guide, you should have installed 4.5.18 then 4.6.16 if you're on 1.3 (see "1.3 Must do these instructions first with 4.5.18 then with 4.6.16." mid-way down on post 1 in that thread). From your description, it sounds like you've done only one or the other.
bobstro said:
If you followed this guide, you should have installed 4.5.18 then 4.6.16 if you're on 1.3 (see "1.3 Must do these instructions first with 4.5.18 then with 4.6.16." mid-way down on post 1 in that thread). From your description, it sounds like you've done only one or the other.
Click to expand...
Click to collapse
First while I was in CWM I install 4.5.18 then 4.6.16 back to back but I got Boot loop
then I install 4.5.18 did the whole sign in and saw the market and it was all good then went back to CWM and instll 4.6.16 and got the good old boot loop again.
so now Im just on 4.5.18...(>_<)
what about 5.?.?? or something or whatever I haven't seen a post on what that dose...
also i was reading that if you want 4.6.16 to work you need to wipe everything and start with 1.2 but since my nook came fresh with 1.3 I cant do that right?
altoplayer said:
First while I was in CWM I install 4.5.18 then 4.6.16 back to back but I got Boot loop
then I install 4.5.18 did the whole sign in and saw the market and it was all good then went back to CWM and instll 4.6.16 and got the good old boot loop again.
so now Im just on 4.5.18...(>_<)
what about 5.?.?? or something or whatever I haven't seen a post on what that dose...
also i was reading that if you want 4.6.16 to work you need to wipe everything and start with 1.2 but since my nook came fresh with 1.3 I cant do that right?
Click to expand...
Click to collapse
I'm in the same boat, system is stuck in boot loop after applying the 4.6.16 MN.
I'm somewhat confused about the sequence we are supposed to follow.
#1 flash 4.5.18
#2 reboot and activate tablet?,, or just reboot into recovery?
#3 flash 4.6.16
Do we need to wipe, or can we just flash away? No combination I've tried seems to work.
I experienced the same thing, first with my wife's NC and then with mine. I stayed with 4.5.18 at 1.3 and that got sick (no market). I installed cherry 1.2, rooted with 4.5.18 and was happy. I'm on 1.4.1 rooted and only problem is B&N archived books won't download but so what, everytning is cheaper or free in Kindle. However, as retired IT professional, this software isn't most robust I've seen, but hey, remember Vista?
Hi,
I have the same problem. I tried it several times. First, I flashed 4.5.18 without any problems, step 1-12. But when I did the same again with 4.6.16, I got a Boot Loop. Step 1-8 were possible without any problems.
I did a complete wipe again, it's always the same problem.
It would be great if anybody here could help me.
PS: Sorry for mistakes, I'm not a native speaker.
Hey guys thanks for the info!
Finally I just wipe and started with 1.4.1 wasn't to sure on 1.2
now...
I have the NC on 1.4.1 rooted with MN 5.12.20
and I have no problems from what I can tell!!! YAY!
I did a complete wipe with CWM "format/system format/data format /cache" and install "1.4.1 complete" not the "upgrade" boot it up and enter my Info and went back to CWM and install MN 5.12.20 and no BOOT LOOP! YAY! everything seems cool but I first made sure when it ask for Zeam lancher I tick the box to make sure its default and after the google setup I tick the box again for the "nook home" or something but its all good after that. I have to check the nook store about the archived books but the books I download seems to be good.
altoplayer said:
Hey guys thanks for the info!
Finally I just wipe and started with 1.4.1 wasn't to sure on 1.2
now...
I have the NC on 1.4.1 rooted with MN 5.12.20
and I have no problems from what I can tell!!! YAY!
I did a complete wipe with CWM "format/system format/data format /cache" and install "1.4.1 complete" not the "upgrade" boot it up and enter my Info and went back to CWM and install MN 5.12.20 and no BOOT LOOP! YAY! everything seems cool but I first made sure when it ask for Zeam lancher I tick the box to make sure its default and after the google setup I tick the box again for the "nook home" or something but its all good after that. I have to check the nook store about the archived books but the books I download seems to be good.
Click to expand...
Click to collapse
I also updated to 1.4.1 and used MN 5.12.20.
B&N store works, Market works, Sideload apps work. This is much easier than fiddling around trying to get root and Market without Bot Loop on 1.3.
Just read there is a new update for stock Nooks... basically gives more comic-reading options.
I currently have a rooted Nook color and don't really see any real reason to want the latest Nook update, but did want to ask: What would happen if i did update? Would I need to root again afterwards?
I know there's guides on previous versions of Nook, but was wondering if anyone had experience yet w/ the latest update.
I just downloaded it to look at it. It is a complete reflash of your ROM. So my guess is it will undo root. And this from B&N:
The NOOK Color Ver1.4.3 update contains new features and enhancements, including:
• Zoom view in comics and graphic novels
• 2-Page mode in landscape for viewing PagePerfect™ and PDF documents
• Other minor system enhancements
Sent from my Nook Color running ICS and Tapatalk
Thanks for the reply, very helpful!
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
I'm in the same state. One of my two Nook Colors auto-updated to 1.4.3 and I'm having the exact same symptoms. The other hasn't yet updated and still works fine. Please share your results
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
thegraak said:
Mine just automatically updated to 1.4.3. When I boot up it asks if I want to go to the normal home or the rooted home. I can go to the rooted home and my apps are there but I can't launch Google Play. Also, if I select the N button and then Home it just goes back to the default Nook home and I can't switch back to the rooted home. I have to restart the Nook to get back.
I'm going to try nooting it again to see if that corrects the issue.
Click to expand...
Click to collapse
This is why you're supposed to disable OTA updates when you Root a Device. Otherwise your device will update without your permission or foreknowledge. Usually it'll reset everything in System so you'll loose things like Root and Gapps.
Personally I just run CM9 off my 16gb class 10 SDcard. No OTAs to worry about and I get pure Android, all without modifying any of the Nook's Internal Memory.
roustabout said:
"back in business on both of them"
Including the google app marketplace? Super cool - the market (and gapps in general) require some things to be in /system to hook into to handshake with the Google servers.
I threw together a super minimal "install su and busybox" rooting tool that lets all of my apps run as I prefer but doesn't include the Market. Nice to know I'll be able to get the Market back as soon as I like.
Click to expand...
Click to collapse
Yup, everything works fine. I was able to install a new app after the update from the Play store
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
eyecrispy said:
I've been out of the loop for awhile but need to restore my NC to stock to sell it. What's the easiest way to do it? I'm currently running an older version of ICS from cyanogen. Help?
Click to expand...
Click to collapse
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
thewaywardgeek013 said:
Download the latest update from B&N, download the CWM 3.2.0.1 SD Card Image from here, create a CWM uSD Bootable using Win32 Image Writer, link here, load the downloaded Update file from B&N into the uSD, turn on/reboot NC, clear System, Data, Cache, install the update.
Click to expand...
Click to collapse
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
Thanks for correcting me there, thought that it was possible already to install it thru CWM…
bigdweeb said:
Update:
I used clockworkmod 3.2.0.1 and manualnooter 5.02.19. I reinstalled manualnooter without wiping the Nook and I am back in business on both of them
Click to expand...
Click to collapse
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
tigger2u said:
I tried this and I cannot access the market. I had a stock unrooted 1.4.2 and then rooted using mn 5.02.19 on CWM 3.2.0.1
My device is rooted but the Market will not download apps. I have followed the guides to clearing the Vending.apk cache and Google Framework Services here: http://forum.xda-developers.com/showthread.php?t=1494901 but Market is not updating and I cannot install apps.
Even after flashing the two files here: http://bookclubs.barnesandnoble.com...tock/m-p/1356004/message-uid/1356004#U1356004 and then re-flashing MN 5.02.19 I just have root.
Currently I have the standard/stock build.prop. I can push files to /system/app and /data/app but that is getting old. And so far no combination of checking or unchecking the NookTools toolbox is letting me install apps via Market.
Any help would be greatly appreciated!
Click to expand...
Click to collapse
Under the "Let's get started:' section in the MN 5.2.19 OP thread, perform step #14, let Market update by waiting patiently for some time.
Check comment #216 in that thread from reebz which he resolved a problem like yours.
8GB 1.4.3 Nook Tablet Root?
So I am really new to this whole idea of rooting but I was wondering if anyone has found a reliable way to root the new (1.4.3) nook tablet? PLEASE!
Error message
DizzyDen said:
You forgot a very important part... follow the first portion of the Customize ROMs thread in my signature... B&N stock is not CWM flashable until the first edit in that thread is made.
Click to expand...
Click to collapse
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Psyphurr said:
I have downloaded the update twice from B&N and copied it to the sd card root. Keep getting a message when I try to install the update, using your instructions, that it can't open the archive (bad).
I am trying your method because I can't get the Nook to update normally. I even followed the default NookColor reset instructions then tried to install the update. The update would never even start. Currently sitting at 1.3.0. So I decided to try this CW mod route. More problems...
This update process is getting so frustrating...... I must assume at this point that the archive is bad again. Tried using both IE and Firefox (heard FF causes problems). The CW boot process worked fine so that's not it.
Not sure what more I can do.
Click to expand...
Click to collapse
You can't edit the zip with archive software. You must entirely extract it, then edit the files, then rezip and re-sign the zip.
To save you the effort, I made a version of 1.4.3 that is CWM flashable and posted it. See my tips thread linked in my signature. See item A12.
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
carlo.edmon said:
I'm using CM10 internally. Do I need to update to firmware v1.43 or not needed anymore?
Click to expand...
Click to collapse
Not needed.
I used manualnooter, I was on stock 1.4.3 when I started. I followed the video and chose the 5.08.20 basic zip to keep B&N upgrade but no App2sd. Since MN my nook is back to 1.3.0. I added the update zip and flashed that with CWM and copied the update from B&N to my Nook, restarted and have had solid WIFI connection, yet my Nook will not upgrade. I have been able to get most of the apps I want from the playstore, but occassionally get an error message that the app is not compatible with my device. For example I can install Temple Run 2 but not temple run 1 or subway surfers. Is this because I am back to 1.3.0? Aside from playstore, is there any other benefit to upgrade now that I am rooted?
The only other issue I've had is once after turning Nook off and letting battery die, I was stuck in boot loop. When Nook restarted it brought me to CWM recovery to reboot which I wouldn't work. I had to wipe, factory reset and flash MN again. Third time seems to be the charm and I have problems when I turn Nook on or off.
Do I need 1.4.3 back? Should all apps on playstore install equally?
Lastly, any opinion on CM10 compared to MN?
The instruction on MN was so clear and easy, I'm tempted to try something new.
thanks for your time.
kellym said:
I used manualnooter, I was on stock 1.4.3 when I started. I followed the video and chose the 5.08.20 basic zip to keep B&N upgrade but no App2sd. Since MN my nook is back to 1.3.0. I added the update zip and flashed that with CWM and copied the update from B&N to my Nook, restarted and have had solid WIFI connection, yet my Nook will not upgrade. I have been able to get most of the apps I want from the playstore, but occassionally get an error message that the app is not compatible with my device. For example I can install Temple Run 2 but not temple run 1 or subway surfers. Is this because I am back to 1.3.0? Aside from playstore, is there any other benefit to upgrade now that I am rooted?
The only other issue I've had is once after turning Nook off and letting battery die, I was stuck in boot loop. When Nook restarted it brought me to CWM recovery to reboot which I wouldn't work. I had to wipe, factory reset and flash MN again. Third time seems to be the charm and I have problems when I turn Nook on or off.
Do I need 1.4.3 back? Should all apps on playstore install equally?
Lastly, any opinion on CM10 compared to MN?
The instruction on MN was so clear and easy, I'm tempted to try something new.
thanks for your time.
Click to expand...
Click to collapse
First, just because Play Store says an app is incompatible does not mean it will not run. It just means they will not let you install it. So you have to get it somewhere else, like the Amazon Store, 1Mobile Store or somewhere else.
Second, you can easily update to 1.4.3 using CWM. See my NC tips thread linked in my signature. See item A15.
And the reason your device got stuck in a bootloop is because you replaced your stock recovery with CWM. See my item A12.
And CM10 is head and shoulders above NC stock, even rooted stock. Stock is Froyo and CM10 is Jellybean. Three Android generations ahead.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
fantastic information! thx.
Thanks for all of this, amazing what you've put together.
leapinlar said:
First, just because Play Store says an app is incompatible does not mean it will not run. It just means they will not let you install it. So you have to get it somewhere else, like the Amazon Store, 1Mobile Store or somewhere else.
Second, you can easily update to 1.4.3 using CWM. See my NC tips thread linked in my signature. See item A15.
And the reason your device got stuck in a bootloop is because you replaced your stock recovery with CWM. See my item A12.
And CM10 is head and shoulders above NC stock, even rooted stock. Stock is Froyo and CM10 is Jellybean. Three Android generations ahead.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse