Database Users

Jamin flashed with Jester now in bootloader

Hi!
I flashed my Jamin with this ROm:
RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1
Now it is totally stick in bootlaoder. I tried to falsh it with other jamin roms but i get "This NBF file cannot be used for your PDA phone. please get new NBF file."
What should i do. how can i get it back to life. Please help.
Thanks

Is your Prophet a G3 or a G4?

How can i tell
Hi!
How can i tell it was G3 or G4? can you please guide me. i also downloded tht noVendor ID rom. it falshes it upto 80% then it gives same NBF error. please help me.
Thanks

i guess it is G3
Hi!
I guess it is G3
thanks

You can tell if it's G3 or G4 by reading the wiki here: http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how. Basically if your IPL/SPLversion ends with .0000 then it's a G3. If it ends with .0001 it's a G4.
If you flashed a G3 device with a G4 ROM, well ... I'm afraid it's bad news because you could have bricked your phone.

please please
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please

thornofcarrion said:
please please tell me that is not it. there must be some solution. i cant just let it go. i cant get it replaced so it has cost me a lot. is there any any way please
Click to expand...
Click to collapse
What is your IPL/SPL version to start with? You need to confirm whether you have flashed the wrong ROM or not.

mY IPL and SPL are..
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it

thornofcarrion said:
Hi KTA!
You are a great help. My
IPL 1.00
SPL 2.20.0001
Please tell me its not over yet. I am really in trouble. thanks a lot lot. i mean it
Click to expand...
Click to collapse
OK then, your device seems to have an IPL from a G3 and an SPL from a G4. This is probably because you flashed a G4 ROM on a G3. Did the ROM Update of Jester's ROM finish succesfully? If it did, can you try holding all the three buttons (Camera, Power, Comm Manager) while hitting the soft reset?
If the device comes back with a prompt to "Press the Send button ... " just hit the green telephone button and you're set to go. If it doesn't give you this prompt come back here and tell us what it's doing.
As someone told you in another thread I would suggest installing the latest ROM from imate, i.e. this one ftp://xda:[email protected]/JAMin_WWE_213923_2139123_022021_ship.zip. Alternatively you can download it from www.clubimate.com (you need to register first).

When i Try to Reset it
Hi KTA!
i did what you said. when i press send it says format failed. what next thanks already and need more help.
Thanks

Rainbow Screen after rom update failed How do I fix?

I have a Cingular branded htc wizard SPL 2.25.0001 IPL 2.25.0001 G4 im guessing.. I tried to do an upgrade to WM6.. It got to 70% and then quit. Now all I get is a rainbow screen. I do see USB on the lower portion of the screen when I plug it back in. ANY HELP?? PLEASE

First of all, if it's a G4 have you unlocked the CID?

Thanks for the quick reply. No I did not unlock it. :/ is there any hope for me? I do get the rainbow boot screen.

jive said:
Thanks for the quick reply. No I did not unlock it. :/ is there any hope for me? I do get the rainbow boot screen.
Click to expand...
Click to collapse
You need to go to the Wizard G4 forum and read the sticky on flashing a G4 phone. You will also find out how to recover with the Wizard Love ROM. You can't do some of the same things on a G4 that you can do on a G3 device, so READ EVERYTHING YOU CAN in that forum to keep from turning your phone into an expensive paperweight. . .

Jive, contact me via AIM and I can go over this with you..

Thanks to madcap180.. got it working by flashing oem rom back on. THANKS! http://www.htcamerica.net/support/8125/software-downloads.html

Flashed The wrong ROM to p4300 i need help!!!!!

Hey, I'm new to this forum and im in such a mess with my htc p4300. i flashed wizard_love ROM to my phone but now it takes forever to setup the software. Does anyone know where i can get the correct ROM for this model phone? I would dearly appreciate it if someone could help me out or at least lead my in the right direction.

flip0406 said:
Hey, I'm new to this forum and im in such a mess with my htc p4300. i flashed wizard_love ROM to my phone but now it takes forever to setup the software. Does anyone know where i can get the correct ROM for this model phone? I would dearly appreciate it if someone could help me out or at least lead my in the right direction.
Click to expand...
Click to collapse
HTC P4300 is AKA HTC Wizard isn't it? So, maybe have a look in the uhmm... Wizard forum? Right HERE or HERE for WM6 ROMs

i dont know if my wizard is a g3 or a g4, IPL 2.28.001, SPL 2.28.001. i flashed a herald ROM to it because some guy told me it would work.

flip0406 said:
i dont know if my wizard is a g3 or a g4, IPL 2.28.001, SPL 2.28.001. i flashed a herald ROM to it because some guy told me it would work.
Click to expand...
Click to collapse
Don't post these questions here. There is a Wizard forum with a lot of Wizard experts for that. I have taken a quick look in the WIKI, and IPL 2.xx.000x should be a G4.

no one can help me... my herald dead now

I try to use HERALD-USPL and Now phone is dead..dead forever
Only can enter in bootloader mode by pressing boot mode keys
and Only show
IPL :1.08.001
SPL :1.08.001
and I try to RUN Orignal RUU HTC_P4350_NOR_4.17.409.3_4.1.13.44_02.94.90_Ship.e xe
and many other tools.
But I always get ERROR [300] INVALID UPDATE TOOL.
help me please.....

Unfortunately, if your SPL was below 4.0.0.0 when you HardSPL'ed, your phone is bricked and will have to be serviced by a repair center. There is no way to fix it, I'm sorry to say, other than replacing the memory chips/circuit board altogether. There is a warning about it, but unfortunately, quite a few people tend to miss it and this is the end result. I'm sorry.

thanks for info, i will donate $100 if you help me...
thanks

I've got exactly the same problem.. but
IPL :1.09.0001
SPL :1.09.0001
Hope there is a solution.

well, im proud to contradict you but fixing is possible. Just contact OliPro... he haves your solution

tramuyo said:
well, im proud to contradict you but fixing is possible. Just contact OliPro... he haves your solution
Click to expand...
Click to collapse
I don't mind being contradicted on this. I just haven't seen a fix from him anywhere.

bcoz its a server-based solution only from Olipro... just contact him...

Server based?
I know he was at least working on a possible way, but that's the last I heard of it.

oh please.... come on... where is the solution .... :-(

Please help - stuck bad

So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck

almost 50 views and no help
somebody please help me out
Goshdarn invalid vendor id

megagprime said:
So i have an HTC Snap S510
Its telus and the xda wiki says its a WILLOW
but under my battery it says CEDA100!!!
so when i tried to flash the SPL it works fine
accessing the 3 multi color boot spl-0.39.0000 is no problem with the vol down+power NOT HARD
but i cant flash the HARDSPL or anything i have the 3volution ceda rom but the romupdate utility loads and goes fine but when it changes to the progresss bar it doesnt go past 0%
?????????????/ please help
have tried diff roms: snaps511 rom and ceda rom with no luck
Click to expand...
Click to collapse
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.

ookba said:
A Snap S510 is a Willow but it will say CEDA in the bootloader. You have to App Unlock the phone, then install HardSPL for the SNAP S511 per JockyW's instructions. Once your bootloader says 0.39.Hard (or whatever version #), then you can flash any ROM. That's all the help I got for you. Read up a bit more if you are still stuck. All the answers are there.
Click to expand...
Click to collapse
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.

sorry about the late reply
i have tried the willow spl (that was my original path)
didn't work can get my spl hard lol
still need help, i think she is bricked
i got the ceda100 boot loader up and cant flash willow or cedar hard spl.... or anything and it doesnt even boot up into windows or anything anymore possibly shes a nice shiny brick

ariesq said:
Hey Megaprime,
Please let me know if this works for you. I'm using a Telus SNAP as well.
Thanks Ookba for your feeback. Always appreciated.
Click to expand...
Click to collapse
hey i got another snap and am ready to flash again but dont really want another paper weight, all i really need help with is usb tethering that doesnt use pam/let my carrier know i am tethered....
i need internet connection sharing like my snap needs a hard spl

different computer, cables, compatibility modes, etc
nothing works

My friend
i have the exact same problem
Bieng researching for the past few days, spent hours on this
Did u find a solution?
I could really use some help right now
Thanks

Hi
Please be sure your phone is HardSPL before testing/using this rom.
download below rom and happy using win 6.5
http://www.mediafire.com/?s59k13tugcw03i4
i am using this on my ALLTEL HTC SNAP SMT 6175
WORKING FINE.
[email protected]
bye/punnoose