Related
Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks
If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).
i have a problem like that
If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....
But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes
osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks
That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App
This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard
Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated
Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation
DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).
i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do
tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??
Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
Hi guys,
How to run MAGLDR without booting Android?
I have problem and I can't solved it by myself. I have installed Android on my HTC HD2. I did it by MAGLDR. Now I'd like to run only Magldr without booting Android. How can I do this? Is it any hotkeys to run only MAGLDR?
I'd like to do that, because my android for some reasons stoped booting. I only can see HTC text on white background. If I put off SD Card and start booting I can see HTC text on white background and then Quietly brilliant text.
P.S. I have NAND ver. of Android which is booted by MAGLDR.
Please Help,
Greetings
Tomasz Pietrzak
Hold power key down.
Hi there,
Very simple. Just hold down the power key after your device switches on and wait. MAGLDR should boot in a sec. or 5
Pozdrowienia,
Janek.
Boot to MAGLDR (all the time)
I called myself flashing a new rom. I was running CMYLXGO 1.1.18n on my HD2. I wanted to change to Hyperdroid. After the wipe, partition, bla bla bla stuff. When I restarted the device, It failed. I decided to return back to the CMY rom to make sure I did not ruin my phone. Did the wipe, and all that stuff again.
Long story short, now if I pull the battery, turn it on, I boot straight to MAGLDR (not holding the button). I have to select option 3 (boot to ad nand). Then everything runs fine. What did I do wrong?
Running
SPL 2.08
MAG 1.3
Kernel 2.6.32.15raf
I still would like to switch to Hyperdroid -
Thanks in advance.
jwgizmo said:
I called myself flashing a new rom. I was running CMYLXGO 1.1.18n on my HD2. I wanted to change to Hyperdroid. After the wipe, partition, bla bla bla stuff. When I restarted the device, It failed. I decided to return back to the CMY rom to make sure I did not ruin my phone. Did the wipe, and all that stuff again.
Long story short, now if I pull the battery, turn it on, I boot straight to MAGLDR (not holding the button). I have to select option 3 (boot to ad nand). Then everything runs fine. What did I do wrong?
Running
SPL 2.08
MAG 1.3
Kernel 2.6.32.15raf
I still would like to switch to Hyperdroid -
Thanks in advance.
Click to expand...
Click to collapse
well if u want to boot directly from nand do the following things
turn on the phone
when u will see the magldr menu go to services ( # 10 if i still remmember )
u will see 5 choices ...t=choose the first : boot settings
u will see 3 choices ...choose the first boot sources and choose android from nand
go back to the last screen and choose always display menu ...it will ask u yes ( call button) or no (end call button) ...press end call end go back to reboot ...now u will boot directly to ur rom
for the part about changing to hyperdroid ...u ned to know the exact recovery partition to use ...for hyperdroid 150mb and for CMYLXGO 1.1.18 400mb ( i think so cuz it's a sense rom) ...so flash 150mb recovery partition and install hyperdroid ...
hope that helped u
Big thanks
Yes you fixed it. Thank you....
I'll work on the Hyperdroid later.
jwgizmo said:
Yes you fixed it. Thank you....
I'll work on the Hyperdroid later.
Click to expand...
Click to collapse
dont forger To hit The thanks Burton
now all u need to do is install the newest clwm and click on fix permissions,then GET RID of hyperdroid and get ultimate droid 3.3,the best rom ive EVER had on my hd2,tried over 100 roms over the last 20 months and ive stuck with this 1 for 3 months instead of 3 days lol,it has EVERYTHING built,all the **** removed,WORLD CLASS,only thing that could beat it is a htc thunderbolt rom or a htc sensation rom on a hd2,that would b ****in sick and i'd wet myself lol
Sent from my HTC HD2 using XDA App
hi, i have HTC HD2 with NAND android with magldr,and yesterday the phone show me sime error,I don't remeber what was,i have onle "Force Stop" botton,but the error shows again and again,and i turn the restart but. and the phone die ,Now i can't turn it on,is there a way to activate magldr,the phone don;t recognise the USB cable ,the battery is full...
a cant go to bootloader the volume key not work!What to do,please
hey anybody here??????????????????
Open it fix the volume key hardware prob, will be a help for u in future too. No other solutn i have got
Sent from my HTC HD2 using xda premium
Hi there,
yesterday I tried to flash a wp7 ROM to my HD2 (Europe version) and after installing HSPL and MAGLDR I flashed the ROM . It went pretty smooth , but after I clicked Finish on my PC . My phone first - didn't reset(don't know if i should do it manualy ) and second stops at the DFT wallpaper , or at some cases goes rebooting randomly . I know that it has Storage card issues .. i tried several cards... and still didn't boot up the OS .. any ideas .. .??
OK slight update...
now it boots up WP7 , but when i restart the phone it goes back to MAGLDR .. is that normal ... ? And also when I plug in the Storage Card it still goes rebooting at will ...
make WP7 default for booting
10. Services, 1. BootSettings, 1. Boot source 3. WPH from NAND
seems your card not compatible
but it's not giving me the menu now.. just loading 123456... go go go and boots up ...
MoveMaker- said:
but it's not giving me the menu now.. just loading 123456... go go go and boots up ...
Click to expand...
Click to collapse
That's how it should normally boot up. if you're getting stuck in the boot loader, then it must be your card.
if you want to access MAGLDR, when your phone is booting up, hold the power button until the menu appears.
Thanks... all's good now ..
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
that doesnt sound good, can you get the magldr boot menu to load?, hold down call end from when you turn it on
Do the volume buttons work there?
can you get to the tri coloured bootloader at all?
sounds kinda serious, if possible id want to SD flash a stock WM6 ROM, SD flash because it would overwrite the SPL, which may be buggered, course 1E can be a memory address which is deffinitely not good :/
Raviteja894 said:
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
Click to expand...
Click to collapse
with UltraFruit ROM restarts is because problem with multitouch driver..
also try remove battery and wait one minute, put back battery and try boot now...
if you want reinstall WP7, no need to flash WM6.5
simply use NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
install, run...
1. use Task29 and flash it (this will be formatted NAND memory)
2. use MAGLDR and flash it
3. flash WP7....
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
goldfly90 said:
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
Click to expand...
Click to collapse
Isnt anyone to guide me?!!!!!!!!
Flashing and doing task29 multiple times are harmful for any ROM . Every ROM has a read write life.
Anyways, just download the winmo from HTC site for your mobile.
Go to the tri color screen, and connect your mobile . USB will be shown in your mobile once connected.(I hope you have necessary drivers installed...if not install windows mobile device centre.)
And flash the ROM. N be patient....it may take some time..10..15mins. Just wait.
Sent from my T-Mobile HTC HD2 using XDA Premium.