Database Users

keyboard problem cannot type uio,jkl,m:',.

hi im having problem on my x1 whenever i try to use my keyboard now
even i didnt press the blue buttons i can type in numbers and i try many ways to get my keyboard to function poperly. does anyone has this problem?
and is there any solution?

help please anyone???

CAN SOMEONE PLEASE HELP IM DYING TO FIND THE SOLUTION AS THIS IS VERY ANNOYING, I DO NOT WANT TO PERFORM HARD RESET ON IT EVEN AFTER I READ THE MENU IT SAYS NOTHING AOUT IT

Did the problem start after installing a particular application? Try uninstalling each application you've added from the most recent backwards, soft resetting inbetween each uninstallation in case something is causing a conflict.
As a last resort a hard reset* should sort the problem, assuming it's software related. Of course you'll need to reinstall any applications you've got on the phone, and back up any data you want to keep on the phone (I always forget to copy newly added numbers from the phone onto the sim before hard resets, unfortunately ).
*switch the phone off, then hold both silver buttons closest to the screen either side of the optical joystick and switch the phone on while holding the buttons. Keep them pressed until a white screen with blue writing appears. Now follow the onscreen instructions to reset your phone to it's factory default settings.
e: just noticed that you replied while I was writing this. no need to shout! It's an odd problem, and there's probably no one else who's had it, hence no replies. If the problem hasn't been solved after a soft reset, then more than likely a program that's been installed has either taken over a keyboard function, been configured incorrectly, or has overwritten a system file when installing. In which case, like I said, uninstall each program you've installed. If that doesn't work, I think you'll have to hard reset it.
e ii: does the "Fn" icon appear at the bottom of the screen, to the left of the middle, right next to the SIP icon?

I HAVE SOLVED IT BUT I HAVE NO IDEA WHY IT IS FIX
first i slide out my keyboard keep preesing the numbers on microsoft word then i go to dail pad and keep pressing the keyboard numbers then i close the keyboard and began to type with compact qwerty later i slide the keyboard out again and it works............... wtf?????????? is this some bug or what if anyone experience it please tell me. no idea what the hack is happen............ btw thanx anyone who helped me, at least now i dont need a hard reset. (i have been hard resetting my x1 more than 10 times within 3 weeks time................)

SquidgyB said:
Did the problem start after installing a particular application? Try uninstalling each application you've added from the most recent backwards, soft resetting inbetween each uninstallation in case something is causing a conflict.
As a last resort a hard reset* should sort the problem, assuming it's software related. Of course you'll need to reinstall any applications you've got on the phone, and back up any data you want to keep on the phone (I always forget to copy newly added numbers from the phone onto the sim before hard resets, unfortunately ).
*switch the phone off, then hold both silver buttons closest to the screen either side of the optical joystick and switch the phone on while holding the buttons. Keep them pressed until a white screen with blue writing appears. Now follow the onscreen instructions to reset your phone to it's factory default settings.
e: just noticed that you replied while I was writing this. no need to shout! It's an odd problem, and there's probably no one else who's had it, hence no replies. If the problem hasn't been solved after a soft reset, then more than likely a program that's been installed has either taken over a keyboard function, been configured incorrectly, or has overwritten a system file when installing. In which case, like I said, uninstall each program you've installed. If that doesn't work, I think you'll have to hard reset it.
e ii: does the "Fn" icon appear at the bottom of the screen, to the left of the middle, right next to the SIP icon?
Click to expand...
Click to collapse
even the fn sign is not there it just straight away type out numbers, after a soft reset when slide out the keyboard instantly when i type it has numbers..... really weird....

That is very odd. I thought for a while that maybe the phone thinks it's in the dialpad, so I tried to see if the dialpad running in the background would cause the same thing in word, but mine seemed to be ok.

SquidgyB said:
That is very odd. I thought for a while that maybe the phone thinks it's in the dialpad, so I tried to see if the dialpad running in the background would cause the same thing in word, but mine seemed to be ok.
Click to expand...
Click to collapse
i think im the first xperia user to encounter this problem i just going mad keep pressing the button and think of related applications that relates both so dailer and microsoft word solve my problem. at first i encounter tthe keyboards button starts from opera mini when i try to type in my address and ended up with numbers

I have almost the same problem i have install TOUCH HD Keyboard and after that i couldn't make èòàù (italian) so after uninstalling that .cab all works well again but no more Virtual Keyboard

you probably have press the function key twice, such that it function-lock your keyboard, so all the keys that you hit will yield the numbers or whatever the function+key is supposed to yield.
just hit the function key again to unlock function lock.

BrigateGB said:
I have almost the same problem i have install TOUCH HD Keyboard and after that i couldn't make èòàù (italian) so after uninstalling that .cab all works well again but no more Virtual Keyboard
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=450188&page=2

anheuer said:
http://forum.xda-developers.com/showthread.php?t=450188&page=2
Click to expand...
Click to collapse
At last no solution right?

How do I change my keyboard?

Hello,
I've been struggling with my keyboard settings since I got my Touch HD. At first, it was a complete QWERTY keyboard. I wanted to change it to a normal keyboard, like on a regular cellphone. I didn't know how to do this. But suddenly, without knowing what the hell I was doing, I accidentally got the keyboard to change. But now my problem is... Well, you know the layout is as such:
1 2 3
4 5 6
7 8 9
Shift 0 Symbol
...I have two problems with this. The first is: I can't type any letters, even if I hold the keys down, so basically, I can't text message to anyone. The second problem is that I have no idea how to change it back. If you could just tell me how to change keyboards, AND how to make the regular cellphone keyboard layout WORK (I have chubby fingers), I'd be really, really grateful.
Thank you for your time.
EDIT:
Oh. I see. How irritating. How am I supposed to know that there are actually two buttons in the center button? Oh well. This still doesn't change my ABC / Numeric problem.

Hi Alfa Jez
Assuming that you have not tweaked your phone in anyway.
There are two ways to change the keyboard settings on your phone.
First, is to go to Settings and within settings your Windows menu option (press window flag top left hand corner of the screen, settings is the second from bottom menu item) and then it gives the option of "Input" showing a keyboard and from there it gives you the option to set your "Input Method" as well as other options on word completion etc.
Secondly, you should be able to change the input settings directly from the middle bottom of your screen once your virtual keyboard has been activated. There is a little up arrow which if you press should give you the option of "Touch Input Settings".
Hope this helps. This information is in the manual.
Best wishes
Kaid

Thank you for taking the time to reply, but I'm afraid this doesn't help me. What you've told me so far, I already know.
Although, I have tweaked my phone with HD Tweak. But no big changes at all.

What does your keyboard look like right now?
Are you stuck on a number-only pad or symbols-only pad or do you see letters on the keys?
Here are some pictures. Tell us which one is the one you have right now.
You should be able to switch through these pads via Sym, 123, ABC keys in the different keypads. You also see that the symbols keypad has 13 different pads to scroll through and it can be "locked" (lock key). That causes it to stay there after pressing different keys. When unlocked, it automatically goes to the normal letters/numbers pad after you have entered one symbol.

Well, my problem is that, even though I have the one with the letters, (of course, it's needed to type letters) I can only type numbers. If you see my problem. I can see the letters and the number, but it seems only to want to use the numbers. Even if I hold the keys down, no letters appear.

Hmm, if you what you have is the second picture above and yet you can only type numbers, then I don't really know what to do. On that screen I only get the numbers if I tap and hold for a second. A quick tap gets me the letters.
Maybe someone else might know what is wrong there.
Did this start recently or have you always had that problem on your HD? Or did it start after you installed a certain program or made some kind of registry change?

Alpha Jez said:
Thank you for taking the time to reply, but I'm afraid this doesn't help me. What you've told me so far, I already know.
Although, I have tweaked my phone with HD Tweak. But no big changes at all.
Click to expand...
Click to collapse
I suppose you turned on T9 in HD tweak? If so, turn it off, then soft reset. This problem is being brought up on an almost daily basis.......

michi123 said:
I suppose you turned on T9 in HD tweak? If so, turn it off, then soft reset. This problem is being brought up on an almost daily basis.......
Click to expand...
Click to collapse
Did turn it on, yes. But I read other people having the same problem, and they were also told to turn off T9, so I tried that as well. Haven't tried soft resetting, though. (Soft resetting = Turn off, and back on, right? ) Will do!
EDIT:
After soft resetting, it worked! Thanks to both of you, I'm jumpin' up and down as we speak. ^^

Glad it worked. Just a word of caution: as you don´t seem too familiar with windows mobile (soft reset is one of the most used word/actions as it´s still windows...) just be careful when using different kinds of tweaks (HD tweak, advanced config) or modifying the registry directly. Don´t just change/turn on/off something because it sounds good. If you don´t know what you are doing it can mess up your device real bad......
Been there, done that......

I'll be cautious, and try to control my curiosity. ^^

Are you still jumping up and down? Or has the excitement worn off?
I'm glad it works now.

[Q] homekey setup on D2?

OK so I just got my D2 last week, and I have to admit its kind of a grows on ya thing. I also have an hd2 as my personal phone so im spoiled with the giant screen. D2 is much more responsive then my hd2 and dont get me started windows lame OS.
BUT....
Why is there no built in "home" key? when Im browsing there doesn't seem to be any way to get back to the desktop of my phone with out hitting the return button and exiting all applications.
Very annoying. And the whole bajillion apps running that can't be shut off. I bought an app that "freezes" them, so far so good. Why do I have to buy an app to open the cmd prompt?
and the searchsoft key. wtf nothing happens.
IS there any way I can hack and re-assign my keys to different functions?
I would like the search key (magnifying glass) to bring up google search any time i hit it, and my home key to always go back to the homescreen.
is this just me being a noob and cant git' r' done or is this a D2/android thing? THis is only my first week with the android operating system, I realy love it, really makes WM look like a pos. yeah and windows 7? it just ads more ghey to the old wm. stil sucks.
Any help would be nice thanks!

Are you using the stock ROM and launcher? or do you use launcher pro or ADW?
the home key should already be assigned to go back to the desktop as far as I know.

Hi yes I still have stock rom. Also my lockscreen doesn't work and when I push the keylock\power button it doesn't fully lock the screen as if I push the volume button the screen turns on. So im not sure what's up. Homekey as I said doesn't work anymore as well.isn't there someway to hack the phone to re assign keypad softkey function? Also none of these keys work on th KB as well. I still havnt upgraded to 2.3 yet. Seems like a hassle to unroot delete every thing and start over. Yes I have clockwork also TI backup pro
Any suggestions would be great
Sent from my DROID2 using XDA App

freakboy13 said:
Hi yes I still have stock rom. Also my lockscreen doesn't work and when I push the keylock\power button it doesn't fully lock the screen as if I push the volume button the screen turns on. So im not sure what's up. Homekey as I said doesn't work anymore as well.isn't there someway to hack the phone to re assign keypad softkey function? Also none of these keys work on th KB as well. I still havnt upgraded to 2.3 yet. Seems like a hassle to unroot delete every thing and start over. Yes I have clockwork also TI backup pro
Any suggestions would be great
Click to expand...
Click to collapse
I don't use the stock launcher anymore. ADW and from what I hear LauncherPro both have preferences that change the home key assignment. I would upgrade to 2.3.20 though it's not a big of a hassle as you would think. I've sbf'd my phone twice and factory reseted everytime I upgrade a ROM. It doesn't take that long as long as you know what you are doing and you have backed up what you need. Google will remember your contacts and apps and settings if you tell it to. The only thing I have to setup are my non gmail email and a few apps that I have login info for. You don't have to unroot. You can just flash the new sbf and then re-root and you'll be updated (always flash with a full or near full battery) and I wouldn't be surprised if it fixed the problem. I've never heard of the soft key's not working on the stock ROM. They worked when I used it before we even had root.
The only way I can get my phone to wake with the volume button is to use "no lock" to turn of the lock screen. But if the lock screen is in place the only way to wake the phone is to press power and then use the sliders.

Need help w/ SystemUI/framework to enable NavBar/soft keys...

I have only tested on the Sprint N3 so far, I will test on the T-Mo version later.
In the past, Note 2, S4, etc., I was able to enable the ICS-style soft key by using the qemu.hw.mainkeys=0 trick. When I apply that on the N3, the System UI crashes constantly.
Is there a way around this? Is this a situation where the System UI is missing the icons or something else? I would very much like to have the soft keys back...
Thanks.
Edit: It has become clear that I will need to edit SystemUI to add the missing parts to get this to work. Please see post 5 below.

snovvman said:
I have only tested on the Sprint N3 so far, I will test on the T-Mo version later.
In the past, Note 2, S4, etc., I was able to enable the ICS-style soft key by using the qemu.hw.mainkeys=0 trick. When I apply that on the N3, the System UI crashes constantly.
Is there a way around this? Is this a situation where the System UI is missing the icons or something else? I would very much like to have the soft keys back...
Thanks.
Click to expand...
Click to collapse
I am curious as to why you would want the soft keys back when the hardware buttons work with the s-pen and you should be able to reprogram the function of the hardware button if you have root.

iankellogg said:
I am curious as to why you would want the soft keys back when the hardware buttons work with the s-pen and you should be able to reprogram the function of the hardware button if you have root.
Click to expand...
Click to collapse
Preference. The hardware Home key is mechanical and the "feel" is different. I like having the consistent touch experience of the on-screen soft keys. I especially miss the ICS customizable soft keys where I was able to customize the location and menu, but that is another story.
In my N2s, I turn off the backlight to the hardware keys and used the on screen soft keys. Worked well for me.

Oh yea, the soft key/NavBar also provides a dedicated button for switching between apps that the hardware doesn't.

I found that the S4 needed its SystemUI edited to enable the NavBar. At the very least, the images are missing. I believe the same goes for the N3. See this post:
[GUIDE][MOD] Enable navigation bar 4.2.2
I can use some help on porting the edits to N3. Anyone?

I've been looking for a solution for a long time now and now finally, I found it!
Thanks! Let me know how it works out for you

Did anyone get this working?
Could someone provide the SystemUI.apk?

Shameless bump. I've read the guides but it's all a little over my head. I really want soft keys, its the last piece of the puzzle to get the phone that way I want it to be. Anyone willing to help out?

bnevets27 said:
Shameless bump. I've read the guides but it's all a little over my head. I really want soft keys, its the last piece of the puzzle to get the phone that way I want it to be. Anyone willing to help out?
Click to expand...
Click to collapse
Same here, I really would like soft keys if anyone would be willing to work on it

[Q] Key remapping issues

Hello,
So... I successfully remaped the left buttons to hardware Menu and Back buttons, but the top right is giving me headaches. It's set from 4 different places (Settings>Reader, NT Mod Manger, twl4030_keypad.kl file and from Cool Reader itself) to work as page back button, but it still turns the pages forward and I can't get what is forcing it to do so. I've tried to set it as a Menu button just from the twl4030_keypad file and it works as intended, but then again, when I set it to RIGHT_PREVPAGE it goes back to be a < button...
Any ideas how to fix this?

Anyone?
I've tried to bind PREVPAGE to the other buttons, but it doesn't seems to work at all. Am I doing something wrong or what?

Maybe the problem is that too many things are trying to control the button. If you want it to function that way for Cool Reader alone, why not let everything else off the hook and let Cool Reader do its thing? Just a thought. I've not encountered problems with hardware button assignments,but then I've only ever used NTMM to do the work.

nmyshkin said:
Maybe the problem is that too many things are trying to control the button. If you want it to function that way for Cool Reader alone, why not let everything else off the hook and let Cool Reader do its thing? Just a thought. I've not encountered problems with hardware button assignments,but then I've only ever used NTMM to do the work.
Click to expand...
Click to collapse
Thanks for the reply!
It turns out that Cool Reader f*cked up somewhere. I re-installed it before, but I didn't notice that my settings were saved, so I thought the problem was somewhere else. BTW, Cool Reader's button assignment options didn't work at all - something was overriding them. What crossed my mind now was to delete the .cr3 folder and that fixed my problem.
P.S. Aaaaaand the problem is back! And I didn't even touched the Key actions... Interesting.
P.P.S. Changing the tap zones is messing with my hardware buttons... oh well.
P.P.S. So, when I change the left middle tap zone from previous to next page it also changes my top right button. Mystery solved. Right middle is also bugged.