Hi,
I had Darky v9.5 running and wanted to update to v10 - unfortunately I didnt read the guide completely and started by flashing the new kernel with sgs kernel flasher. As a result the phone hangs in a reboot loop. After the Galaxy S splash screen the phone shows many single pixels with different colors, then reboots.
Is there a chance to rescue this phone or should I look for a new one?
cheers
mathiase
Get it into download mode and flash back to stock through odin.
Just flash some 3-part fw (jpu f.e.) with odin with repatition and pit, and it should be fine.
Hi,
okay but how do I get the phone attached to odin? Usually I put it into download mode, but the vol up + home button does not work.
any suggestions?
cheers
mathiase
Download mode is vol down, not vol up.
Vol up is for recovery
Hope this helps
Download mode is vol down/home/power..... i think your phone will be fine buddy. If you check out darkys v9.2 resurrection edition, follow the guide and then should be up and running in no time.
Tip on 3-button combos; (The way I remember it):
Download mode: Vol DOWN + Home + PWR
I mostly use recovery (CWM) for upgrading my phone: Vol UP + Home + PWR.
Hi, aah I mixed up the two modes - sry. By the way: is there any Linux to I can use instead of Odin? The problem is that I use Linux _only_. I just installed an XP virtual machine in Virtual Box but it seems like the device cannot be passed through to the Windows VM.
cheers
mathiase
There is the Heimdall project.
It should work. You can find it here on XDA.
Related
i have problem with SGS i9000 i go to in recovery mode cwm i upgarde it without wipe it
with this rom (I9000_Alpha_HTC_Sense_v0.5)
now my sgs not go in 2e recovery with 3(volume up+home+power)it is not woring yet
main screen (galaxy GT-i9000) appear but it just restart when boot in 3 or 5 sec and usb plugin not long::: in 3sec only after that disconnet
now im not have in sgs software (rom) and 3button not working and not have 2e recovery and CWM all just only have boot screen (galaxy GT-i9000) 3secnd restart sgs
ithink it understand my problem
plz quickly solve my problem
Go to download mode (volume down+home+power) and flash any stock rom with repartition checked. your phone should be okey
Remove battery and try again.
Can you get into download mode ??
If so flash a stock rom with pit 512 and repartitioning checked via Odin .
The rom you installed is Alpha that means not ready for Beta full of bugs use only if you know what you are doing .
ROM does not work is what the post says where it says must read .
jje
i do all
i use odin
i remove battery
im not have (software now ,2e recovery and 3button v up+home+power not working to go in recovery mode)
but my sgs when i connect it with pc usb plugin 3sec and restart
If you have any other ROM zip on your SD card then just flash speedmod kernel with odin to get CWM recovery back (see my signature for link)
If you don't have any other rom zip to update with CWM recovery then you will need to flash a stock rom with odin.
i try with odin but useless
if you have program anther odin give me plz
may be try the reset button, which in the middle of the cam and speaker, search in forum for details
Sent from my GT-I9000 using XDA App
i'll be crazy with this SGSi9000
i want help
Which part of using odin you didnt understand? just go to download (vol DOWN+home+power) mode and flash with pit.
Sent from my GT-I9000 using Tapatalk
i'll be crazy with this SGSi9000
i want help
You may be better off paying a service centre to fix as you seem incapable of following instructions .
jje
I tried using the 3buttons (volume up+home+power)it is not responding
I can not inter to recovery mode or download moded
always my sgs restart in 5sec when i run sgs
recovery mode does not respond
I think it's somehow deleted of the device
warning, I didn't try #2 before, but may save you if you don't have JIG
1. JIG
2.
Originally Posted by Yovi
Wassup all...
Back story
I managed to brick my SGS within 24 hours of getting it:
My computer wouldn't (and still doesn't) recognise my phone (sometimes for a few minutes at a time) when I plugged it in.
I thought it would be a great idea to try flashing from to Froyo from Eclair anyway, and while it was going on, my pc disconnected the phone and bricked it COMPLETELY... I pulled the bat, tried all the 3 button combos (they worked before I flashed, I tested to make sure), and nothing worked...
I spent hours looking through the forums and the only advice I saw was to try a jig, before reading that for a 100% bricked phone it would not work...
What to do
- Take of the back case of your SGS, inbetween the camera and the speaker, you will see a little circular hole...
- Take a pin/pen and poke it...
- Hold the hole pressed in and press the 3 button combo for download/recovery mode
It should go into download mode and from there you can flash on a fresh firmware!
I saw NO mention of this hard reset's existence anywhere on the website at all, it worked perfectly for me!
kasserx said:
I tried using the 3buttons (volume up+home+power)it is not responding
I can not inter to recovery mode or download moded
always my sgs restart in 5sec when i run sgs
recovery mode does not respond
I think it's somehow deleted of the device
Click to expand...
Click to collapse
i tell you,,,
its not volume up+home+power
but volume down+home+power (download mode)
i hade this problem once,,,
i can,t go to recovery mode, but i still able to go to download mode..
xfakexbloodx said:
i tell you,,,
its not volume up+home+power
but volume down+home+power (download mode)
i hade this problem once,,,
i can,t go to recovery mode, but i still able to go to download mode..
Click to expand...
Click to collapse
unless you mess with your bootloader (in this case you didn't) you must be able to go into download mode and flash a fresh odin rom with pit 512 and repartition enabled
i have been doing alot of rom upgrade via clockwork and this is the first time my phone brick.
i tried the vol up, vol down and power button at the same time and it just brings me to "vibrant samsung" screen.
i also tried removing battery, hold vol up, vol down and insert battery, it goes to a screen where it says downloading. but didnt move for hours.....
and if i switch on normally, it just keep restarting on vibrant screen.
how do i solve this problem?
You have to use odin to flash back to stock....
That's what the download screen is for.
From that downloading mode screen you can odin it back to stock.
http://forum.xda-developers.com/showthread.php?t=734475
lazylilsnoop said:
i have been doing alot of rom upgrade via clockwork and this is the first time my phone brick.
i tried the vol up, vol down and power button at the same time and it just brings me to "vibrant samsung" screen.
i also tried removing battery, hold vol up, vol down and insert battery, it goes to a screen where it says downloading. but didnt move for hours.....
and if i switch on normally, it just keep restarting on vibrant screen.
how do i solve this problem?
Click to expand...
Click to collapse
removing battery, hold vol up, vol down and insert battery, Have Odin up and running then plug in your cable. Then let go of the button
yea, i found that page too. but anyone can get the link working?
thanx!!!
lazylilsnoop said:
yea, i found that page too. but anyone can get the link working?
thanx!!!
Click to expand...
Click to collapse
can't see the page?
here i quoted the OP
justanothercrowd said:
T959 (US T-Mobile version of the Galaxy S) Firmware that can be flashed through Odin to restore all partitions to the way your phone was shipped to you.
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
JFD ODIN Images from Samsung (PDA)
www.justanotherdev.slackdev.com/T959UVJFD.tar
MD5:632730f6b637f53e5b10e5cbc8b966a7
512 PIT File (PIT Extract first!)
www.justanotherdev.slackdev.com/s1_odin_20100512.rar
MD5:b5628c8e183fdd8f4c703321ca40e33a
ODIN
www.justanotherdev.slackdev.com/Odin3.rar
ALL 3 Files plues the root update.zip
http://tinyurl.com/2bc5b6r
thx to KopyKatKiller
INSTRUCTIONS!
1.Your Device must be in DOWNLOAD mode to use ODIN.
2.Get your phone into Download mode by holding vol down and power.
3.THEN connect your phone to the USB. (some folks have had luck doing it in reverse..connecting the USB then Power and vol down)
4.Open Odin and load each file with it's corresponding field..PIT,PDA,CSC etc. (In this case we just use the PDA and PIT)
5.Don't check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6.Hit "start"! be patient!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
Finally we get some U.S love from samsung firmwares.
For those looking the Nandroid method it is in the post below but only recovers ,system, data, cache and datadata. Not your kernel/recovery or BASEBAND/RADIO (Modem.bin)
Thx to all helping work on the Vibrant. Especially Youneek, Scepterr, MS_Guru, Wes Garner, rhcp0112345, and anyone I may have forgot.
Twitter
Click to expand...
Click to collapse
sorry, what i meant was the link to download odin.
all link by "justanothercrowd" is not working
Get in download mode like you have before then..
Use the Vibrant Toolkit and then click Flash to Stock and then press "Reboot into Download + Start ODIN" (ignore the "Check that USB debugging mode is enabled" because you're already in download mode), it'll open up ODIN and then follow the instructions for using ODIN.
http://forum.xda-developers.com/showthread.php?t=954509
From bay_wolf's post, some information about setup of odin,
When you select the PIT and PDA files, it should default to the installed location and if not then browse to where you installed AIO Vibrant Toolbox as the files are in there.
Click to expand...
Click to collapse
Note: there are instructions on how to use odin on the Flash To Stock screen. All the files you'll need will be downloaded with the download for the vibrant toolkit.
I've had this problem and freaked when i couldn't find a download to Odin, so I used the vibrant toolkit and it worked.
Here's the download link from his thread (credit to bay_wolf): http://www.multiupload.com/G3LUINMUE0
THANX ALOT GUYS!!!!!!!
now gonna start to update it to http://forum.xda-developers.com/showthread.php?t=1021383
just another quick question, which rom are you guys using? i came from bionix rom to the simply galaxy v3.0, it doesnt seem to b fast and smooth. any other recommended rom?
Try some EDT roms...beast...Malice, Trigger, or Bi Winning.
Flash back to stock too.
I use simply Galaxy with Crysis Sensation theme (TWiz 4.0 + tweaks) & DamianGTO Gold v2.0 kernel (not available on XDA). Then use an app called Blade buddy to set up all Stagefright tweaks (under advanced settings) and debug.sw.hf then menu > apply > save. Quadrant scores 2200+.
Trigger is really good (2.2) and there's a cool new theme called Vibrant HD for it.
Haven't tried CM7 but it looks cool, lots of themes with it.
Hi,
Can anybody reply the steps to hard reset Idea ZTE Blade. My mobile is struck at start up screen android logo.
Tried multiple ways to unlock .... home + vol up + power... but no use.
Tried to connect system, but system is not recognized as a usb device.
Please reply imm...if anybody have the solution.
Thanks
sri
Assuming you have cwm installed, did u try volume- and power?
QuantumFoam said:
Assuming you have cwm installed, did u try volume- and power?
Click to expand...
Click to collapse
Actually i have installed z4root and rom manager, then tried to install new custom ROM using CWM. It is started and and rebooted once and showed some command line agruments and then again tried to reboot. But it got struck at green andriod logo white background screen.
Tried all possibilities to reboot recovery mode (home + vol + power, vol - + power, vol + + power, ...) But no use.
And also tried one more also, installed sdk in fastboot. but my mobile is not recognizing. showing waiting for devices for hours when i run "fastboot reboot".
If do you have any other solution please let me know immm..
Thanks
sri
h**p://wwwen.zte.com.cn/endata/mobile/India/
h**p://wwwen.zte.com.cn/endata/mobile/India/India_SoftWare/201205/P020120521626244417125.zip
This is the original bin file for idea blade. Download this file and put image.bin file in image folder of sd card. and then power on holding the vol+ and menu buttons.
Kindly check this
h**p://www.modaco.com/topic/356286-official-imagebin-for-idea-blade-stock-rom-tpt-from-zte/
Thanks it worked menu +vol+ +power.
But struck at 75% error.
any other image file.
I have a Samsung Galaxy S (i9000). If I connect it to PC, I can see it is charging but I can not see the phone nor in Explorer or Download Mode.
The phone is using [NIGHTLY][ROM][4.2.1] CyanogenMod 10.1 for Samsung Galaxy S and I have installed it via CWM. No matter what ROm I installed via CWM, I could not see the phone in Explorer.
Another problem I encountered is that the phone can not be shut down: if I choose Shut Down it is restarting.
Any help will be appreciated.
Thank you.
Are you on windows 8?
Install the newest USB-Driver in Windows-7-Compatibility-Mode. If you are not on windows 8 it could help anyway.
http://forum.xda-developers.com/showthread.php?t=961956
Another solution for accesing your phone would be Airdroid on Play Store https://play.google.com/store/apps/...t=W251bGwsMSwxLDMsImNvbS5zYW5kLmFpcmRyb2lkIl0.
I would try to reflash your rom to solve your other problem.
I am using Windows 7.
I want to access Download Mode in order to change the ROM with ODIN.
I do not know how to reflash it. Can you provide me more details?
Thank you.
Save your Data and make a backup before doing anything.
First of all try to go to recovery wipe chache + dalvik + fix permissions reboot
Factory-Reset would be next to try.
If wiping does not help:
Solution 1 - Odin:
Access Download Mode over Powermenu -> Bootloader
or with shutdown (in your case press power ~8 seconds or remove battery), press volume-down + home + power than flash a rom with Odin.
Solution 2 Download your prefered rom copy the zip-File to your phone and flash it through recovery (same way you installed CM 10.1). Wipe cache + dalvik in recovery.
HOWTO GET INTO RECOVERY:
- Turn off your Phone
- Hold VOLUME UP + HOME Buttons
- While holding VOLUME UP + HOME Buttons press POWER Button until Display lights up, then release only POWER Button
- Still hold VOLUME UP + HOME until you got into Recovery
- Release all Buttons
------------------------------------------------------------------
HOWTO GET INTO DOWNLOAD-MODE (Bootloader):
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
Thank you for answering my question, but I already did all of above. Even so, the problem is that my phone can not be seen in Download Mode.
micutzul said:
Thank you for answering my question, but I already did all of above. Even so, the problem is that my phone can not be seen in Download Mode.
Click to expand...
Click to collapse
But you managed to install a working rom?
Tried with another usb-cabel, computer or usb-port?
Perhaps this helps, although i never used Mobile Odin.
http://forum.xda-developers.com/showthread.php?t=1347899
So I bricked my new toy, luckily it has nothing important on it--except for a lot of dank memes, I do mean a lot.
Anyways here what I did:
-Downloaded kingoroot
-Rooted Device with no custom recovery (my bad)
-It fell out of my pockets therefore the batteries came out
-When I turned it back on I was greeted with Kernel security error
-Kies doesn't recognize it nor does Odin
Now I'm here.
Boot into download mode (vol. Down + home + power) then press vol. Up to enter download mode. Now plug in your USB and Odin should see it. Flash new firmware (stock firmware should un-brick it)
njturner84 said:
Boot into download mode (vol. Down + home + power) then press vol. Up to enter download mode. Now plug in your USB and Odin should see it. Flash new firmware (stock firmware should un-brick it)
Click to expand...
Click to collapse
Quick question, it's really nothing: Did you bother reading my post at all?
MrCoolesta said:
Quick question, it's really nothing: Did you bother reading my post at all?
Click to expand...
Click to collapse
Yup, you never said that you went in download mode when it wasn't being recognized, so I assumed you were connecting it to usb on the error screen.