My nook is stuck in the screen right after the screen that says a new way of reading. Its a black screen with the nook logo in the middle. Please help!
Related
ok so i go thru the procces of getting to the bootloader screen no problem... after the colored screen comes up it goes to the white page with "loading..." at the top... this is were my problem comes in... it quickly reverts back to the colored screen as if the loading failed. can anyone help me get to the bootloader screen?
The colored screen IS bootloader...what are you trying todo?
Take the sim card out. I had the same problem
tizocalamilla said:
after the colored screen comes up it goes to the white page with "loading..." at the top...
Click to expand...
Click to collapse
do you have a leoimg.nbh on your sd card?, cos thats usually why it jumps to the loading screen, however is the card the stock 16gb card? cos if so they dont work for flashing. Use a 4gb or smaller. (some 8gb work, too, but not all)
So my USB cable came out of the tablet while the screen said entering download mode and had Acer in the middle too, inside DotNetDetector the green bar wasn't even at 25%. Now it's stuck in a black screen and I cant figure out what to do. Nothing seems to be working.
EDIT: I got it to work, just finished installing CWM and looking for roms now.
Hello:
As stated above, I've a NST 1.1 succesfully rooted with TouchNooter 1.11.20
It has worked fine for months, and it was working fine today:
The device was switched off
I turned it on
I read some with CoolReader
I switched it off
Later on (3 hours or so) I turned it on and since then it's stuck on the start screen, the one that says "nook tm by Barnes & Noble" and has a line of five dots below.
The black dot cycles through the white dots.
If I try to restart it using the power button, the screen flashes and then remains there, never pasing through the "Read forever" screen.
If I simply wait, the screen freezes, displaying "nook tm by Barnes & Noble" with the black dot in one of the five dots below, no longer cycling. If I then try to restart it using the power button, the screen flashes and then remains there, cycling through the white dots, never pasing through the "Read forever" screen... and then it freezes after a while.
If (with screen frozen or not) I try to use the power -> screen flash -> hold down left + right lower buttons it remains in the same screen.
If (with screen frozen or not) I plug it through USB to my PC it will flash the screen, the black dot cycling through the white dots; I do gain r/w acces to the local drive and SD Card
After removing the SD Card, I've tried all of the above, with no change.
So: it doesn't complete the start up and I can't shut it down completely.
Any suggestins on how may I unbrick my NST?
Awaiting your kind reply,
I have been using my nook color for over a year now. I tried to boot it in android using an sd card method.
Now when i switched it on after a few days it will power up, show the read forever logo and then the screen goes black.
I thought maybe the bootloader is gone or something. So I prepared an sd card with cyanogenmod in an attempt to flash it internally.
Even then when I press the power button it turn on, shows the loading screen and the screen goes black.
When I do this for seven times then the factory reset screen appears but when i select the factory reset it just gets stuck there and nothing happens. I left it there once for over an hour to see if something happens but without any luck.
Is there any solution for this or my nook is bricked completely??
Hello,
Trying desperately to repare my phone before a close trip..
I was using the Skype lite app on my yotaphone2 (YD201 android 4.4), then the Skype screen freezed and the communication stopped. Then the "powered by android" black screen appeared. Since then, when the phone charges, the screen alternates the "powered by android" image with an entirely blue screen.
I don't manage to reboot android. What would be the easiest solution?
Thanks in advance.
PM