Related
Hi everyone,
At first at all i would like to apologize for my language.
Well...
I have HTC HD2 LEO for East Europe.
I change Rom to Artemis HD2 ROM and it goes well. After few days it realese Artemis HD2 ROM Family Ver 22.0 Gen 2 and I update ROM.
At first boot it load normaly but after soft reset it stuck on HTC logo with information about ROM etc in left down corner. Then i do hard reset and htc load rom but the soft was unstable and when I put off battery it stuck on HTC logo even i do hard reset.
I read a loot about white htc logo and do many trick,
I try to instal official rom for east europe using usb connection, but instalation stop and 9% and triangle apear. Instalation stop at difrent stage for difrent ROM's, sometimes is 24% sometimes 2% but never goes to end.
I try instal by sd card but sytuation is that... 3 color apear, very quick white screen with "Loading..." and back to 3 screen color and nothing more. I try with 2 different cards unnamed 4GB and kingston 8GB.
I try to instal different radio 50 and 51, SSPL, HSPL it's says i mus have 1.42, HSPL2/3 it's stuck at usb connection searching. I forgot, 3 screen color show me i have 1.66.HSPL XE.
Only one operation goes well, to 100%, Task29 provided by doloop, after that HD2 buz and show only white htc logo. But when i try to do more... change radio with task29 it's stock on 24%
I don't know what to do now. Mayby goldcard will be helpfull but i don't shure what is wrong with the sd card and i don't now how to do this goldcard.
Thank You for eny sugestion,
I will try to do enything to wake up my HD2
Ask if You need more information.
Triceq said:
Hi everyone,
At first at all i would like to apologize for my language.
Well...
I have HTC HD2 LEO for East Europe.
I change Rom to Artemis HD2 ROM and it goes well. After few days it realese Artemis HD2 ROM Family Ver 22.0 Gen 2 and I update ROM.
At first boot it load normaly but after soft reset it stuck on HTC logo with information about ROM etc in left down corner. Then i do hard reset and htc load rom but the soft was unstable and when I put off battery it stuck on HTC logo even i do hard reset.
I read a loot about white htc logo and do many trick,
I try to instal official rom for east europe using usb connection, but instalation stop and 9% and triangle apear. Instalation stop at difrent stage for difrent ROM's, sometimes is 24% sometimes 2% but never goes to end.
I try instal by sd card but sytuation is that... 3 color apear, very quick white screen with "Loading..." and back to 3 screen color and nothing more. I try with 2 different cards unnamed 4GB and kingston 8GB.
I try to instal different radio 50 and 51, SSPL, HSPL it's says i mus have 1.42, HSPL2/3 it's stuck at usb connection searching. I forgot, 3 screen color show me i have 1.66.HSPL XE.
Only one operation goes well, to 100%, Task29 provided by doloop, after that HD2 buz and show only white htc logo. But when i try to do more... change radio with task29 it's stock on 24%
I don't know what to do now. Mayby goldcard will be helpfull but i don't shure what is wrong with the sd card and i don't now how to do this goldcard.
Thank You for eny sugestion,
I will try to do enything to wake up my HD2
Ask if You need more information.
Click to expand...
Click to collapse
I know this might be a dumb question but is your sd card formatted to fat32?
nvm try to put on orignal SPL? and than try to flash to stock rom with Sdcard?
i suspect that.....
when it first wouldn't boot artemis 22 you needed to change the radio not the rom but then you flashed official rom by sd card it removed hspl and then failed because wrong region.
boot to boot loader
install hspl3 choose 2.08.hspl
return to boot loader
flash any radio mentioned in artemis thread using usb
return to boot loader
flash artemis
when phone starts to set up force hard reset
allow to boot
let us know how it goes
thank You for request
roloracer
there is no dumb question but dump anserwers . Yes, card's are formated using fat32
Veldmuus
how can I put only SPL? any solution?
samsamuel
"boot to boot loader
install hspl3 choose 2.08.hspl"
I try, and it's strange. When I go in to boot loader plug usb cable to htc the "serial" change to "USB" and it is the end of my work becouse when I run HSPL3 it's stay at "Waiting USB connection..." and no else happend.
Mayby it will be succesfull if I use to do this sc card but.. as You know it isn't work.
When you tried to flash the official stock rom back from the sd card did you make sure the rom image was called “LEOIMG.NBH” and on the root of the sd card.
Triceq said:
boot to boot loader
install hspl3 choose 2.08.hspl"
I try, and it's strange. When I go in to boot loader plug usb cable to htc the "serial" change to "USB" and it is the end of my work becouse when I run HSPL3 it's stay at "Waiting USB connection..." and no else happend.
Mayby it will be succesfull if I use to do this sc card but.. as You know it isn't work.
Click to expand...
Click to collapse
try all different usb ports. try to not use ports in the front of pc case, use one around back of the pc.
also right click hspl and choose "run as administrator"
My hd2 see sd card beacouse when slot is empty "Loading..." don't apear. When I plug card "loading..." is apear but only for one socond mayby faster.
root.. you mean file not in eny folder, just on starage card without any folders, yes?
I called leoimg.nbh every time I put file to sd card
What operating system is on the pc you are tring to flash hspl with?
samsamuel
how do You know i use front usb port?
I plug to other usb ports but effects are the same. What I discover... when the HSPL3 is searchin usb connetion and I pluget off hd2 from usb there apear Critical error from HSPL3 program. It mean probably HSPL3 connect to hd2 but stuck.
I work on Xp profesional SP3
hspl is picky about which port it uses.
Personally i would enter bootloader manually, connect to usb, wait for 'serial' to change to 'usb', and only then run hspl3.
what radio rom is currently on the hd2?
Well.. Every time i try to instal something I go manualy to bootloader. As I say hspl3 stuck at connetion with hd2, i can turn of program run again but nothing happends.
Probably radio was 2.10 or official now i dont remember but I gues 2.10
When you connect the phone to the pc the pc does detect it, right? becuase i had a couple of instances where i've tried to install updated radios, ran the installer and windows hadn't finished detecting the phone and that caused a connection issue and the radio installer to quit but when i ran it immediately after this it worked fine.
So i suggest you get the phone to the bootloader manually then connect it to the pc an then leave it a few minutes before you run the hspl3 installer.
Guys... all of You are brilliant. If I don't ask what the problem is on this forum probably I cry on my htc box. But I don't .
It's working... rom instal and everything goes well.
The thing i change to work: I change home I was in my second home and now I'm In my family home special to test instal HSPL3. I have here other USB cable and other computer with XP OS. I read all post and do all again.
First I plug usb cable to front panel... too fast, my bad. It's going wrong.
Then I read about chose different USB connector... too fast becouse when I try i fail, but read last post, plug htc to pc, go make coffe and back. Turn on HSPL3 and it's work, find my hd2 and give me a choose witch spl to instal.
Then I back to samsamuel post and make his instruction. When I end every thing work very well i restar my hd2 and by the now i don't see eny problems.
At finish I would like to thanks
roloracer
Veldmuus
and special for giving best tips
samsamuel
qwerty_7564
M3PH
Thank You very much Guys,
Good news! and now a long deep breath of relief.
No problem dude. The wait is caused by windows XP needing to install and then load a couple of drivers so it can talk to the phone in bootloader mode. If you're not amazingly rich like me (OK i'm not really) and can't afford a cutting edge PC like mine this may take a few minutes to complete.
hi
i tried to flash my hd2 wp7 i installed magldr then my phone freezing on the "htc" screen nothing happening please help me nothing works
Go into bootloader mode, flash magldr and try flash wp7 again. Or if you're afraid to try WP7 again, go into bootloader mode and flash a winmo/rom, whichever you prefer.
This is all assuming you know how to operate magldr, read all the guides on HD2, and did all the reading one should do, and it just didn't work for you.
P.S. did you even have an sd card in your phone when starting up WP7 for the first time?
i went to red green blue screen and tried to install old rom wm 6.5 but it didnt install
thanks dude i got the wm 7 at last just last question if i remove the my sd card and add the new one i get wm 6.5 back or i need to flash?
hi forum members
so sory for bad language first thanks for understanding
bring a htc loe my customer tryed rom update and take error and tryed hard spl and update rom good than open phone but not open only htc logo show and wait tryed different radio and rom ... same hard reset same
l tryed very very different rom same radio same
boot is eresed than make write boot again with jtag try hardspl and room radio same again l dont understand
now phone not accepted any rom and radio flash all time error %8
sd card flash rom tryed same
official rom tryed same
phone bought italy
l take s/n number used htc.com rom same error
.....
can you halp me if you have a idea please write here have a cobay htc hd2
Try running a task 29 on the phone it might help as task 29 reformats the NAND memory of the phone. You will have to reflash a ROM to the phone though after the task 29 cause the task 29 will remove the current ROM.
My Leo start to restart or crash , in the last months, and some time as grafical problem wrong color and flashing some time problem at boot! Now don't boot at all!
first, at the moment of it stop on device was:
HSPL 2.08
CLK and CRW
some CM7 build!
radio 2.13.50.xx version
The Leo was discharged, and i as some trouble to restart it attached to the charger
but finally it boot, then was discharged and never boot up!
I have put to charge but it freeze after some time (botton back light on and red led on if i disconnect to charger) so i have try to charge it on boot screen, tricolor )
I have try after i was charged everything without success !
The only thing i can access is Tricolor boot screen whit HSPL 2.08
when i try to boot only white screen!
Task 29 - fail (270 error) from HD2 toolkit, from task29.exe and from mtty
Flash 1.66 and 3.14 Original HTC ITA rom from SD, fail at radio!
i have try task 2a, task 28 as well task 29. then flash from sd original htc rom, same fail !
Flashing clk, magldr. or HSPL 2 fail!
Custom 6.5 rom, from sd go until finish but on reboot, as usual white screen!
So i have try flashing radio 2.xx.51 and 2.xx.50 but fail at end.
I have also try flashing custom rom, 6.5 and android from pc, but obviously no way!
The only way to remove clk is from sd HTC flash, and is possible is this the problem?
Some one can help me to try recover or understand what is happen to my Leo??
(yes is bricked probably ......but what? )
Thanks
huggy_72 said:
My Leo start to restart or crash , in the last months, and some time as grafical problem wrong color and flashing some time problem at boot! Now don't boot at all!
first, at the moment of it stop on device was:
HSPL 2.08
CLK and CRW
some CM7 build!
radio 2.13.50.xx version
The Leo was discharged, and i as some trouble to restart it attached to the charger
but finally it boot, then was discharged and never boot up!
I have put to charge but it freeze after some time (botton back light on and red led on if i disconnect to charger) so i have try to charge it on boot screen, tricolor )
I have try after i was charged everything without success !
The only thing i can access is Tricolor boot screen whit HSPL 2.08
when i try to boot only white screen!
Task 29 - fail (270 error) from HD2 toolkit, from task29.exe and from mtty
Flash 1.66 and 3.14 Original HTC ITA rom from SD, fail at radio!
i have try task 2a, task 28 as well task 29. then flash from sd original htc rom, same fail !
Flashing clk, magldr. or HSPL 2 fail!
Custom 6.5 rom, from sd go until finish but on reboot, as usual white screen!
So i have try flashing radio 2.xx.51 and 2.xx.50 but fail at end.
I have also try flashing custom rom, 6.5 and android from pc, but obviously no way!
The only way to remove clk is from sd HTC flash, and is possible is this the problem?
Some one can help me to try recover or understand what is happen to my Leo??
(yes is bricked probably ......but what? )
Thanks
Click to expand...
Click to collapse
Please explain to me how this is related to "Android NAND Development" ?
And once that is done, would you like to calm down and use a better translator as from what you just posted above, i seem to make out nothing other than the fact English is not your native language.
All I know is:
- make sure you have the latest OFFICIAL ROM for your device
- flash it via SD
- flashing an original ROM from the SD if you have HSPL and a custom ROM will cause the process to reboot at some point; this is normal, and the update process should continue (you write that it fails on radio, but you didn't mention what exactly happens)
If flashing an original ROM doesn't work, then I'd wager your HD2 is busted.
In what way are you developing for HD2 NAND ROMs? Also, your device is not bricked if you can access the tricolour bootloader. The post above pretty much sums up any useful info I could give.
If your HD2 gives short 7 vibrates, its time for replacement. thats a panic vibrate by the processor. one of your chips is on its way out. this should be connected to temperature as well. keep it cool and without power for few hours, and it mught revive. but just for time being. it might worsen with time.
and please better translator.
Oh please, sorry for my English !
I do my best to try to make me understand!
Here is an International forum and here we all speak English!
have you ever tried to translate from English into Italian? is almost incomprehensible, anyway if someone does it, I try to do everything possible to understand him, and answer !
comfortable life to have all the information in their native language huh?
you know what ?, we Italians are so uncivilized, that where I work in IT department of a large company,
with Indian colleagues, who deal with Unix, we communicate on English! Find the same in other countries.....
Please explain to me how this is related to "Android NAND Development" ?
Click to expand...
Click to collapse
Why you are so rude whit a person that as probably just fried his device!!
Please why ?, and why "TO ME" ? (seems arrogant)
is not enough to say, I don't know how help you, and also probably is not the appropriate section....
And once that is done, would you like to calm down and use a better translator as from what you just posted above, i seem to make out nothing other than the fact English is not your native language.
Click to expand...
Click to collapse
1-Leo don't boot OS
2-Leo go on BootLoader (HSPL2.08)
3-Flash from SD , nbh extracted from original HTC_Leo_update. FAIL!
4-Overwrite HSPL, whit Other HSPL version or respective SPL (2.08) FAIL
5-mtty (bootloader commands) Task 29, Task 28, Task 2a, execute but not solving the problem, maybe is not nand format or bad block related....
Can you please say something different from the fact that Leo does not go?, like spl code to investigate what kind of hardware fault?
Have a good Day
Thanks & Regards
(you write that it fails on radio, but you didn't mention what exactly happens)
Click to expand...
Click to collapse
Yes, just because i don't know, what i can see is a , after the upgrade go to end,
the blue write ,become red ..like this
00018003
LEOIMG.nbh - FAIL
RADIO_V2Fail
Update Terminate
UPDATE FAIL
Same Code ,radio error, when i try to update whit full rom.nbh, so is a radio fault i think!
In what way are you developing for HD2 NAND ROMs? Also, your device is not bricked if you can access the tricolour bootloader. The post above pretty much sums up any useful info I could give.
Click to expand...
Click to collapse
no way is related, and sorry to you too .... my only last beloved device......
PLEASE MODERATOR
IF
the thread is on the WRONG PLACE ,# SORRY
Then
CAN YOU PLEASE move the THREAD, # and forgive me,
Thanks
NOW Can you share your Knowledge!
argue if i can access The SecondProgramLoader device is not bricked!
If your HD2 gives short 7 vibrates, its time for replacement..
Click to expand...
Click to collapse
No my Leo don't gives 7 short vibrates.......
This is not and android problem nor related to development.
You will get more qualified answers if you ask in the right forum.
Its just that simple
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?