good night friends!
I'm here asking for this help not for lack of looking for the solution, sorry my bad english, I'm from Brazil and I
defy caught in a bootloader, I tried almost everything I found here in the forum, but most of the problems is
reset solved by making the recovery, but in my defy the recovery does not open, the flash works only power + vol up, already
I spent several roms to no avail, could someone help me run my recovery? grateful heart
list of roms flashead
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FFJORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbfz
JORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbf
JRDNEM_U3_2.34.1_DEBLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA02B.0R_USAJORDANRTCEE_P029_A019_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTHKTW_P021_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
Motorola_Defy_Nu___Android_2.2_FroYo
shadow_defy_2.3.3_85_Orange
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
mmec2 said:
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
Click to expand...
Click to collapse
I really can not, no way to go to the screen with the robot android! he goes right on the logo motorola M!
can it be hardware problem?
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
farsight73 said:
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
Click to expand...
Click to collapse
I'm using motorola rsd 4.9 with updated drivers, what happens is install the rom normal after reboot gets stuck in the Motorola M logo, the software update site does not recognize my phone, do all these roms that I would be no my phone?
im tried this roms now
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF
3.4.3_11-Stock.UKTmobile_BLUR
but no results!
don't worry about it, dude.
maybe you can try the way followed:
1.power off your defy;
2.remove the battery from the phone;
3.plug the usb cable into the phone without battery;
4.open RSD and chose one of the roms your listed, but 3.4.2-177-005 NORDIC prefered,
5.take the battery into your phone, now your can see the "connected" on RSD;
6.click the "start" button to flash;
7.wait the phone reboot completely, usually it'll reboot.
if not reboot, remove and on your battery, power on your phone, then press the "volume - and power" botton together, you can enter the robot screen, press volume up and down botton together, usually you can enter the recovery, then chose wipe 3 and 4, totally you can save your defy~~
Be sure to have enough battery while flashing..
Get the phone into bootloader (hold volume down when switch on) and flash an SBF like one from the list you've attached using RSD lite. Surely you have used RSD Lite before?
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
jdearauj said:
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
Click to expand...
Click to collapse
This same friend, I have the same problem, is this a hardware problem? I move the roms but not normal
Vol I login recovery - + Power key
http://forum.xda-developers.com/showthread.php?t=966537
Try flashing nordic, if fails arabic, if fails, 2.3.3, if fails probably corrupt nand broken hardware.
Before and after every flash always try to access recovery (volume down) and WIPE. reboot and wait crossing fingers, if it fails to boot flash next sbf, try to go recovery + wipe; reboot, cross more fingers; if fails to boot try next sbf and repeat.
The reason for this is that you can flash a lower version but it wont boot, so you have to flash a higher and higher version until you get one that works.
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
zyxwvut said:
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
Click to expand...
Click to collapse
OMG Exactly!!!! i have same problem and nobody seems to be able to tell me what to do, they keep saying same thing about trying various SBF's and Vol down + power method. No matter what SBF file I successfully flash with, i cannot get into boot recovery mode.
I have heard before from desperate users that they were able to revive their phone by flashing a full 2.3.4 sbf. This however comes with downsides of not being able to downgrade to froyo by flashing ANY froyo sbf's. There is a way to downgrade back to froyo but its a dirty method. Even after downgrade you can't just flash a sbf, you will always need to restore nandroid and flash fixed sbf
So as my wife tells it she received a text message then the phone shutdown and went to the bootloader screen. She was running Liberty2 v3? up until now.
The phone boots to the bootloader showing:
Boot Loader
D2.37
err:A5,69,55,00,27
Ready to program
USB
The standard bootloader schpeal.
Unfortunately I can't do anything to get beyond this. I have tried SBF to 2.3.20 and 2.3.4 both come back to the same screen. Cannot access recovery by holding X or the down volume button.
On boot the phone shows the Red Moto "M" logo then fails to the boot loader.
HALP!
You don't see the M logo when you go into boot loader. Hold the up arrow on the keyboard as you power on. Boot loader will be the first screen that you come to.
Don't know what to tell ya. I can't get into recovery no matter what keys I press. I get the "M" logo then it fails into the boot loader with the above error.
I can ONLY get to the bootloader no matter what I do. No SBF files seem to work and I cannot get to recovery to try and wipe data/cache to fix the bootloop. Basically I'm stuck at the bootloader and can't do anything to get past it.
twiceover said:
I can ONLY get to the bootloader no matter what I do. No SBF files seem to work and I cannot get to recovery to try and wipe data/cache to fix the bootloop. Basically I'm stuck at the bootloader and can't do anything to get past it.
Click to expand...
Click to collapse
I'm pretty much in the same situation.
Wish someone with better knowledge than I can pipe in.
Been stuck like this going on 2 weeks now.
There has to be an .sbf to flash that'll work.
phirewire110 said:
I'm pretty much in the same situation.
Wish someone with better knowledge than I can pipe in.
Been stuck like this going on 2 weeks now.
There has to be an .sbf to flash that'll work.
Click to expand...
Click to collapse
Yeah, today I'm in search of a DInc2 to replace it. Luckily I do have a Droid1 that uses the same battery so I can charge it and keep trying various things to get it working. Just sad that a phone that was perfectly good one second is toast in minutes. She could have at least dropped it and had it die that way...
Bricked D2
bump. D2 Bricked. Saw there was a sbf for D2 global, but those of us with bricked D2 seem to be out of luck for now. Oh well, I guess i don't need a phone for a while. . .
Did you guys take the newest Verizon Over the Air updates?
I have Motorola Defy MB252
When i bought the phone i installed MiUI to it. I have been since always upgraded MiUI using its updater. Yesterday I was drooling after the Android 4 for the Defy and decided I would try it out. I had some rom loader with 3 buttons installed on the Android. I pressed the one with boot rom manager button or something like that – I cant precisely recall what the buttons said or what was the name of the program. After this the phone booted and got stuck to the Motorola logo. I then tried to recover the phone to working state by flashing different SBF files from umts_jordan/list.php. None of them work – I am currently stuck in situation where the phone wont even show the Motorola logo. The phone automatically goes to the SBF flash state. Im flashing from Windows using the RSD like v5.5. Latest SBF I flashed was 3.4.2_145_finland\JRDNEM_U3_3.4.2_145-003_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA039.0R_UCAJRDNFRYORTCOREEU_P009_A006_HWp3_Service1FF.sbf
I only get blank screen with white front indicator led shining. I can get to flash state and it will only then print its programming it. The RSD lite says flashing was OK.
I did not keep good track what SBF files I have tried to flash.
I’m desperate – do you have any ideas what I should do?
[EDIT]
I flashed Defy-BL6Downgrade.sbf. Now i can get to Bootloader 09.10 (i see the normal bootloader when booting the phone but still no android).
FIXED EVERYTHING: Follow instrucsions in thread #1152377 post #8
Hi guys, back to this phone and beginning to think i wasted my time again getting this phone again.. smh.. I downgraded the os from a version higher than 2.26.20. Flash the sbf correctly with these instructions...
http://forum.xda-developers.com/showthread.php?t=1165672
Now when i boot the phone, i cant go into recover meny to wipe the system (Shows a triangle and android, buttons do nothing), also.. when the os loads up, the wallpaper is black and i can only go to the apps menu.. NOTHING launches..flash a few times, no success.
I am guessing the bootloader needs to be downgraded or another file has to be flashed??
Any advice?? so annoyed -_-
jxs714 said:
Hi guys, back to this phone and beginning to think i wasted my time again getting this phone again.. smh.. I downgraded the os from a version higher than 2.26.20. Flash the sbf correctly with these instructions...
http://forum.xda-developers.com/showthread.php?t=1165672
Now when i boot the phone, i cant go into recover meny to wipe the system (Shows a triangle and android, buttons do nothing), also.. when the os loads up, the wallpaper is black and i can only go to the apps menu.. NOTHING launches..flash a few times, no success.
I am guessing the bootloader needs to be downgraded or another file has to be flashed??
Any advice?? so annoyed -_-
Click to expand...
Click to collapse
I hope you tried this:
http://www.hard-reset.com/motorola-droid-pro-xt610-hard-reset.html
If not, please try, if this don't help, try to access download mode:
When phone is off, hold both volume buttons and power on. Release volume buttons when you see black screen with bootloader.
Hi from Lithuania!
please help someone
short story - i tried to flash recovery image via asus flash tool and when it stuck. now i havent any droid at begining no recovery option, and when it powers up touch screen dont work.
long story- 1. my friend ask to remove password from zenpad,his children add it. password with program app lock or something.
2. i tried to do hard reset but i didnt find the combination (it was very strange) only three options comes with vol down and pow. nothing comes with vol up.
3. i decide to flash it to stock firmware, download stock img drivers and etc.
4. i used asus flash tool, and it stucks at the moment, and now i cannot flash it anymore. the symptoms are-
nothing comes when power up(only light)
when its power on touch screen not working,but still see the locked app and all concent.also cannot turn it off (need mouse to turn it off)
how i can get out of this situation? how to fix it ? please help guys, i dont have any minds now, searched info for 1 week, but maybe bad.
Greetings from Lithuania
the biggest question how to get the device to bootloader? i cannot to it by buttons