Hi,
I buy ----->http://www.bargaincell.com/black-wi...4c9f6a8990df99b&cPath=58893_59052_59053_59061
I have tried to make it work but can not get anything.
I tested with Blueinput and EasyConnection.
Any ideas? someone has been able to connect a Bluetooth keyboard?
Thanks in advance
Rom: Dexmod 1.42
Im Not To Sure About This, But since it has been real quiet in here lately i would try searching through the Elocity A7 Accessories Section, There are Alot Of Guys That Play With This Stuff over there.
I find solution.
Only enter pass "1111" on menu bluetooth and press 1111 + {Enter key} on keyboard bluetooth.
Related
Can anyone help me!!!
When i press the bluetooth button in the lower right corner, i don't have the option for the Bluetooth Manager.
It seems there is noch BT Manager installed on my XDA mini. I want to make a connection with my PC to surf with my XDA to the internet.
I was looking trough the internet for HowTo's and always i need to open the BT Manager.
So where do I find the BT Manager to install it?
nobody of you pro's can help me?
plz help me, i have just bought my XDA and i am an absolutly newbie. what can i do to get the BT Manager?
Have you looked in Start>Settings>Connections. If there's no bluetooth control panel there, then I'd suggest a hard reset.
Hello,
I have recently bought the Parrot Minikit bluetooth speaker but it seems that there is something wrong with connection between it and the touch cruise.
pairing is performed with no issues but when i want to make a call it RANDOMSY sometimes transfer audio yo the Parrot minikit but sometimes it does not and the call stays in the phone (which of course makes me unable to hear...)
I really do not know what to do. i have tried several ROMs and several Radios (including the original ones) but it seems the problem is consistant with all of them.
Please of anyone knows if there is someway to solve this problem make some bluetooth patch to the polaris or an alternative bluetooth stack i can install that may help ... or any other suggestions...
Please Help
Thanks
Same problems here. How can I downgrade to BT 1.2?
Hi guys,
This problem was handle before. Just look in http://forum.xda-developers.com/showthread.php?t=437888&page=4
Succes
WAS
Hi, i recently got a HTC HD Touch on Orange which i bought on ebay. The phone already came loaded with WM 6.5 on and so far i love it except for one problem. I have a Datsun 350z with intergrated bluetooth. When i tried to search on my phone it couldnt see anything, so this morning i upgraded my phones ROM to the latest Dutty's_HD_WM6.5_5.2.23016.5.0.3_Leo_R5. Since then i can search and find the bluetooth device of the car, input the pin code for it and it is added in my devices tab, however nothing appears in the "Select services to use from this device" section.
I am wondering if nyone had any idea if i am doing something wrong or whether its jsut that my car doesnt support the phone? I was also thinking about reverting back to WM6.1, would that work? Also, how do i go about getting a vanilla copy of WM 6.1?
Any help would be much appreciated,
Regards
jc0r
Just a quick update. I can get the phone to connect to the bluetooth module in the car but its not easy. Basically when i put the keys in ignition that bluetooth gets power, i then have to quickly search for bluetooth devices on my phone and then it will connect. Would be nice if the phone just connected everytime to the car like my Blackberry did. Is this hardware or software problem please?
Not that anyone actually cares about my problem but i thought i post the answer up for anyone that might be struggling in future.
What was stopping my Bluetooth working with my car was having WiFi on. When i disable WiFi the car + phone works perfectly together. In my particular situation i use my phone to connect to an ad-hoc network, and because the phone is not connected to the ad-hoc when in my car the searching constantly is causing the problem. Whether this would be the same with infrustucture mode im not sure.
I had my PS3 keyboard working great on my topaz( same bt as HD2?). I was using an energy rom and I had to install BT_HID.cab file and it paired and worked great is was handy as hell. I could play galaga, Dial the phone from across the room, using ear peice, texting was wonderful,etc. All new roms I try on my hd2 (energy, kumar, mirri, elgoncia) non will allow paring of keypad.
The phone sees the keypad, starts to pair , the phone gives me a number to type in the keypad and the keypad leaves paring mode and an error occurs. I tried the bt_hid.cab file on all roms and still no luck. If I had it workind my HD2 would be perfect for me. I want to know if the bt from my topaz can be put on my HD2? or maybe the bluetooth manager? Any help would be greatly appreciated, and it doesnt seem to difficult because topaz and hd2 have same similar bluetooth stack and software if I am correct. It seems a lot of people would like this fixed or patched. I am going to write down what version of what works on topaz and start there. Please help me OBi Wan HaHA
stevem68 said:
I had my PS3 keyboard working great on my topaz( same bt as HD2?). I was using an energy rom and I had to install BT_HID.cab file and it paired and worked great is was handy as hell. I could play galaga, Dial the phone from across the room, using ear peice, texting was wonderful,etc. All new roms I try on my hd2 (energy, kumar, mirri, elgoncia) non will allow paring of keypad.
The phone sees the keypad, starts to pair , the phone gives me a number to type in the keypad and the keypad leaves paring mode and an error occurs. I tried the bt_hid.cab file on all roms and still no luck. If I had it workind my HD2 would be perfect for me. I want to know if the bt from my topaz can be put on my HD2? or maybe the bluetooth manager? Any help would be greatly appreciated, and it doesnt seem to difficult because topaz and hd2 have same similar bluetooth stack and software if I am correct. It seems a lot of people would like this fixed or patched. I am going to write down what version of what works on topaz and start there. Please help me OBi Wan HaHA
Click to expand...
Click to collapse
Not sure if this will help you , but other BT keyboards do work on the HD2 so, do not think it is actually an HID driver issue, I use an apple BT keyboard, and a Logitech DiNovo, both work very well ... I had one issue with the keyboard that was very close to what you see with yours, I took the batteries out of the keyboard overnight, it paired the next morning without a problem ....
Might help, might not ....
thanks
Thanks for the input. Tell me why there is a great number of people wanting tekosoft to adapt to broadcomm for Hd2 . Loads of people waiting for someting that worked great on my topaz. I have tried the reset button on the keypad. The phone spits out a 5 digit code and the pairing lights on keypad go out. I have tried lots of options. The bluetooth manager looks very different on hd2 than it does on topaz. Since the hd2 sees the keypad it seems like it might be easy fix since I have both phones to tinker with. What rom are you using?
Has anyone made any progress on this i would love to get this working on my hd2
if it pairs the same as the ps3 controller, this might be a workaround:
http://forum.xda-developers.com/showthread.php?t=689984
I tried different roms curently using hyperdroid/ Miri with no success the phone always crashes when i pair/connect my bluetooth and try to make call. I followed directions of a poster to pair/connect and unpair and reboot. It worked once and then same problem again.
I want to use android on a regular basis but cant use it without bluetooth. Can anyone help ? Thank you !! I searched this forum and on the web for a while before posting this. If you have a solution please help.
cmboud said:
I tried different roms curently using hyperdroid/ Miri with no success the phone always crashes when i pair/connect my bluetooth and try to make call. I followed directions of a poster to pair/connect and unpair and reboot. It worked once and then same problem again.
I want to use android on a regular basis but cant use it without bluetooth. Can anyone help ? Thank you !! I searched this forum and on the web for a while before posting this. If you have a solution please help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=780020
Well I tried that without any success, anyone else has another solution ? let me know i cant use the HD2 without bluetooth. I live in CA mandatory bluetooth in the car and i drive a lot.
cmboud said:
Well I tried that without any success, anyone else has another solution ? let me know i cant use the HD2 without bluetooth. I live in CA mandatory bluetooth in the car and i drive a lot.
Click to expand...
Click to collapse
Try different kernels. I've found that even though I continue to use the same build (ShubCRAFT 1.5), when I swap kernels I get differing results with the BT headset.
Media Audio tends to work whatever, I've had no problems with that, but phone audio is a different matter.
I've been using michyprima's r11 kernel lately (noAXI) and that seems to just about work but I do have to make a call and press the Bluetooth button immediately initially to get it to work.
Even then, it's flaky, as when the phone rings and I press the answer button on my BT headset, it brings up the Voice Dialer dialog over the top of the phone app and doesn't answer the call. I've resorted to only connecting BT to media and not using it for the phone.
I appreciate that doesn't solve your problems - I've simply decided to try each and every kernel until it's fixed! I'm sure the wonderful devs here will get round to fixing it soon but I think they've probably got other things higher up on the priority list right now!
I'm using a Sony Ericsson MW600 BT headset btw.
hello sorry for my English
my jabra bt hyperdroid on 1.2 works, but sometimes there is more sound for the march to re-I does not restart it by pressing the restart button, but I removed the battery!
For me works like that
success
I forgot to tell you that I deactivated the sound of media