Database Users

more tips for 6900

At the end of this link/thread you will find tips (in English) for speeding up your 6900 and general maintains.
Sorry I did not explained/translate it all, but the main idea & tips are translated
http://www.pocket.co.il/community/showthread.php?t=149407&page=5
p.s. you will find in this thread more tips like how to use E-JAVA etc.
there is a say that one picture = 1000 words
you will see there lots of pictures
I will not be available in forums in the near future
so enjoy and use all tip as much as you can ,try them despite experts that will say otherwise on some issue
all been tested on the 6900 successfully with good improvements
I found the 6900 is a grate and not slow!! device if you tune it up to your needs
Enjoy

the above link was updated
I will try update it more soon
enjoy

great tip
Thanks for the link. I dont have 6965 at the moment but deciding to have one soon.
Now I'm checking if there any problem with the device.

xenon_art said:
Thanks for the link. I dont have 6965 at the moment but deciding to have one soon.
Now I'm checking if there any problem with the device.
Click to expand...
Click to collapse
if you can bay the 6915/10 [not us model] it has less problems but on specification they are the same ,do not know why but they just act diffrently on speed ,3pr software ,rigenal issues, any way enjoy
grate device

the above link was updated
I will try update it more soon
enjoy

English
The website is not in english...

EREZYAD said:
At the end of this link/thread you will find tips (in English) for speeding up your 6900 and general maintains.
Click to expand...
Click to collapse
ALSO TRY TO LOOK AT ALL PAGES OF THIS THREAD SOME WILL HAHE ENG TRANS AND SOME HAVE LOTS OF PICTURES TO GET YOU STARTED
ENJOY
P.S- LOOK AT THE END OF ANY POST TO SEE IF THERE IS ENG TRANS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

office 6.1
For U.K. users that had problems installing the office 6.1 update using MS installer (due to regional problems …) here is a CAB installation
Ignore any warnings (tap o.k.) and soft reset at the end of the installation
now your good to go
You can choose to install to card
Can be removed like any other software
http://rapidshare.com/files/76053596/Office-WM5.CAB.html
enjoy

Nice Old Bike

CBR1000RR said:
Nice Old Bike
Click to expand...
Click to collapse
yap
nice sofware that will let you fill like the 6900 is i-phone (free )
http://www.pointui.com/Home.aspx
one more (also supports hib) is pocket cm for contacts
http://rapidshare.com/files/80578896/Nadavi_and_Tene_Nadavi_Hebrew_Pocket_CM_0.17.cab
nice battery tray menu
HKLM/ SERVICES/POWER /SHOWICON
DWORD = 1
HKLM/SOFTWARE/OME/POWER
Dword showstandbypage=1
hw6915—DUN:
http://asukal.net/blog/?p=381
http://forum.xda-developers.com/showthread.php?t=322776

bt sound
http://mobilitytoday.com/forum/showthread.php?t=14646
good to know
voice dial
new live msn
install to device a lot better then old VER (also lite )
backup your device before any instalation/reg hack
some apps will replace the softkey function so you can restore with your backup or use sk-tools or restore using Registry Editor location:
"HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113"
"HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112"
enjoy

EREZYAD said:
yap
nice sofware that will let you fill like the 6900 is i-phone (free )
http://www.pointui.com/Home.aspx
Click to expand...
Click to collapse
works fast, nice

for the new users of the 6900
please read the tips from the link on my first post of this thread
the beginning is in hebrew but you will also find English translations
on my last post I have added new skin of destiator 7 (the new VER) and one more reg hack that will auto disconnect your GPRS
this hack is very useful if you want to update the weather or GPS … and not have the connection running after your "action" ended
if there is no data transfer the GPRS will shut itself at the end of the time frame you have set it to
there is no translation for the last post but the pictures will do the trick
don’t forget to go over all pages of the hebrew thread
enjoy

QuadSMS-Automatic Contact Lookup

Hello All,
Just thought i would share an application i developed to help using your Windows Mobile phone work a little more efficient. This application will automatically perform a address book lookup when receiving missed call SMS notification. Here are some screenshots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before. Standard SMS missed call notification
After. Automatically perform an address book lookup.
Website http://www.hexamine.com.my/QuadSMS
Download QuadSMS for WM5 PPC/Smartphone here http://www.hexamine.com.my/QuadSMS/QuadSMS_WM5.cab
Download QuadSMS for WM6 Standard/Pro here http://www.hexamine.com.my/QuadSMS/QuadSMS_WM6.cab
Installation - Run the .cab file and reboot/reset. No settings required.
Comments/Feedback appreciated

that's great piece of code, wonder why wM6.1 still does not do that natively, it has been in other brands for years...
Anyway only one drawback, it would be really nice if you posted here a version without a signature, i mean now i know who made, so i don't see the point to see your signature in every sms, it's just unprofessional, more even a spam
One way or another, thanks again

gaco said:
Anyway only one drawback, it would be really nice if you posted here a version without a signature, i mean now i know who made, so i don't see the point to see your signature in every sms, it's just unprofessional, more even a spam
Click to expand...
Click to collapse
+1 for that feature without a signature

But i've already removed all the development software from my PC ! Too much work reinstalling everything just to remove the signature ;P

just post the sources, i'll take care of the rest,
second drawback it only looks up first name so if have two michaels in my contatcs with different lastnames then i still don't know
so post the sources, i'll take care of that either
B/R

I will look into reinstalling my development tools and refreshing the code. Regarding posting the source, i shall refrain from that. The last time i did that , someone had added a trojen into my code, recompiled it and posted it as a legit copy and "general" uses who got caught blamed me and accused me of intentioanlly infectting their pc's. This really did happen.

I have just refreshed the code to new version v1.04 . Only 2 small minor changes.
7th July 2009 - v1.04 released
- Changed display "First Name" to "FileAs". This will show both First/Last Name.
- Removed the signature "Developed by ....." (Hope everyone who requested this is now happy
Files can be downloaded from the original link in the first post above. Remember, UNINSTALL previous version first.
http://www.hexamine.com.my/QuadSMS

SMSBubbles
rubik said:
I have just refreshed the code to new version v1.04 . Only 2 small minor changes.
7th July 2009 - v1.04 released
- Changed display "First Name" to "FileAs". This will show both First/Last Name.
- Removed the signature "Developed by ....." (Hope everyone who requested this is now happy
Files can be downloaded from the original link in the first post above. Remember, UNINSTALL previous version first.
http://www.hexamine.com.my/QuadSMS
Click to expand...
Click to collapse
I am using SMSBubbles and it does the same and more!
"SMSBubbles displays incoming text message or delivery receipt in a "bubble". If text of message contains a phone number SMSBubbles tries to find matching contact from the phone's contact list and according to the settings replaces the number by composed contact string. All phone numbers in a bubble are shown as links, so it is possible to activate them and then make a call to the linked phone number."
But decide yourself what to use...

How can I download the "SMS Delivery Receipt Fix" for PPC?
SGH-i200 said:
I am using SMSBubbles and it does the same and more!
"SMSBubbles displays incoming text message or delivery receipt in a "bubble". If text of message contains a phone number SMSBubbles tries to find matching contact from the phone's contact list and according to the settings replaces the number by composed contact string. All phone numbers in a bubble are shown as links, so it is possible to activate them and then make a call to the linked phone number."
But decide yourself what to use...
Click to expand...
Click to collapse

htc cube viewer will not open video

Hello. flashed my xv6900 to wm6.1 have wmp and the jade image viewer that is paired with the htc camea.
it appears the jade image viewer takes over both the image viewing and video viewing options within the cube 3 panel both open default into the My Photos directory regardless of what settings are picked.
I can surf to My Video and they thumbnail shows of the video but selecting the video products no moving image as expected in wmp.
such a bummer that I flashed to 6.1 to pick up some featues i like just lose a few others!

It's only the cube!
Change the reg values.

wow! how vague is that response, is that a serious answer?

rsfeller said:
wow! how vague is that response, is that a serious answer?
Click to expand...
Click to collapse
Opposed to being the truth?
Don't believe me, a simple search will prove it correct.

ok, time to rant...
1. If i was a complete newbie then you answer is useless. It provides no direction, no specifics and reads like a smart a$%! comment.
2. If I am not a newbie then obliviously 99% of all tweaks are handled in the registry and a more specific or useful answer would be far helpful then telling someone "go fish".
"it's the cube" has little meaning as an aswer and obviously it has something to do with the cube, as that is the program I am referring too!
So usually when one inquires about a poor or vague answers it's pretty predictable that the next one tells the inquire to learn how to use the search function or google as "it's been covered 1001 times before". Let's just hope they have tried that but either due to not knowing what key words to search, what direction to go or just far to many hits due to far to many threads...it just doesn't always work out. In my case I spent an hour researching the topic...then I asked...and this is what I get?
Hopefully as a senior member you are far more helpful in the real world then the virtual one. My guess (and I frequent my share of forums) is the people who have been around since the early days of a particular BB or technology just get so sick of the same questions or the fact many people don't have great logic or tech skills.
I could be dead wrong on every comment here but your vague answer really is not helpful. If you know something specific on this topic, then add to it. If you felt that you did write something useful then you should elaborate when the inquirer is not "getting it" which may be my case. We both could be wrong but I seriously got no help from either reply.
It's funny how much I see this on tech boards but seldom on my automotive boards.

I imagine you still haven't searched yet. You see, all the new people start new threads because they can't find their answer, then get **** because they pay no attention to a general rule. Had you searched anything remotely close to my search below, you would have found your answer in under FIVE minutes, guarenteed. Call me nuts, but I think that's a lot quicker than waiting on another smart ass comment from me, don't you think?
In fact, I tried a few other very simple searches, all with the same basic result, THE ANSWER.
The below image is page 1 of my search, some titles are quite to the point on whether or not it's what you are looking for.
So, when I say "It's only the cube", that's because it's just the cube, been discussed over and over and over again. What's that mean? There are more than enough threads to give you good search results.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[APP]Open That URL!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone, I'm pleased to present my new app (available for free on Google Play Store): Open That URL!
OTU is a client-alike application to speed up file shared with the great app Fast File Transfer but in what way? Actually by downloading the file for you! In this first release, it opens the browser, but I plan on just launching download intent (I'm working on it right while I'm writing) so that, together with the above mentioned software, you can share your files easily and really fast.
This software is intended for those devices that are not equipped with NFC Chips, but it's compatible with every Android from FroYo 2.2 and above.
On the next post you'll find changelog and features, while here below you can find the download link.
Please, tell me what you think about it and what feature you would like to see in future releases.
​

Version 1.4 -> 1.5 - 14 march 2013
New shortcut icon
Bugfix for double download issue
Version 1.3 - 06 march 2013
New tablet layouts, everything at your fingertips!
Version 1.2 - 04 march 2013
Fixed italian translation
Version 1.1 - 03 march 2013
Added the possibility of downloading directly without opening browser
Added default Google backup for settings
New icons in "about" window and ActionBar
Added the possibility of canceling a download (only from direct download) from the main app
Features
DashClock compatibility
Shortcut available
Opens default browser just when you ask it!
Free - donations available but not for unlocking features, they are ALL available!
Needs Fast File Transfer
Localized in english and italian
No AD at all!
Holo themed

First of all THANKS for working to add features for FFT, And no offending.
The main success of FFT is other end device does not need to install FFT to download files, just opening browser and entering IP address every time is a little headache, present the FFT developer is working on those to make it easy for transfer.
So if you could also think regarding that, it would be nice.
What I say is to think on how to assist FFT to easily receive files on other end device without installing the app.
My opinion is just other end device just need a password to receive file that show in sending device, just like bluetooth pairing
Thanks..

Looks cool, I'll keep an eye on this!
Sent from my very expensive paperweight!

sekhar13515 said:
First of all THANKS for working to add features for FFT, And no offending.
The main success of FFT is other end device does not need to install FFT to download files, just opening browser and entering IP address every time is a little headache, present the FFT developer is working on those to make it easy for transfer.
So if you could also think regarding that, it would be nice.
What I say is to think on how to assist FFT to easily receive files on other end device without installing the app.
My opinion is just other end device just need a password to receive file that show in sending device, just like bluetooth pairing
Thanks..
Click to expand...
Click to collapse
Hello mate,
no offense at all What I thought when developing this little help is the fact that I wanted something to launch directly from my lockscreen and that's all I too think FFT is a great app, and I'm pretty convinced that if my application is useless for most of people (those with NFC for instance), they will at least know FFT and keep it, so I think it's not that bad to have some more visiblity
Anyway, my app does not add any feature to Fast File Transfer, I'm just downloading from a fixed location, no less and no more
I hope nobody gets disappointed by my answer, and if, in any way I offended you, I apologize, since I wasn't meant to be rude
Thanks for commenting, if you all think my app needs any other feature, let me know
Tip: I'm thinking bout a widget (for those who use WidgetLocker) and a Tablet layout
Thanks,
Tiwiz

Any Ideas Please?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the screen on my junsun v1 pro when I go into the trip computer on my Peugeot 208 1.4HDi. The gear icon (ringed in red) asks for a code when I tap on it and I cannot find a code for this anywhere. I have no idea what it's for since the other 2 screens just have a clear button to reset the trip memory. I assume there are some settings but since I can't find the code, I have no idea. If anyone knows what this code is I would be grateful!!
[edit] I have tried all the obvious ones: 8888 8878 1234 5678 etc etc etc

As per usual, post Android system information including MCU version.

marchnz said:
As per usual, post Android system information including MCU version.
Click to expand...
Click to collapse
I assume this means that no-one here knows, or can hazard a guess. I posted the question in the wild hope that someone might have the same setup and know what the code is. To be honest, if you don't know what the code could be then I doubt that the system info and Mcu version will make any difference unless you have a magic key to extract it.
I don't have access to the car just now but, if it will make any difference I'll get the info when I do...

Candesta said:
I assume this means that no-one here knows, or can hazard a guess. I posted the question in the wild hope that someone might have the same setup and know what the code is. To be honest, if you don't know what the code could be then I doubt that the system info and Mcu version will make any difference unless you have a magic key to extract it.
I don't have access to the car just now but, if it will make any difference I'll get the info when I do...
Click to expand...
Click to collapse
Usually it's better to post your question in a thread related to your head unit because many users will get an email with your question.
Most users will not read a thread with the generic title "any ideas please?" because in most cases it only contains a thrown down question asked by a lazy user.

Please install this tool
Current Activity - Apps on Google Play
A useful tool for Android Developers
play.google.com
and open the screen you posted in your first post.
The app will show the technical name of the app (package) and the technical name of the screen (activity).
Package name should be com.ts.MainUI but activity name needs to be provided by yourself to allow further investigation.

Candesta said:
I assume this means that no-one here knows, or can hazard a guess.
Click to expand...
Click to collapse
It means you haven't provided enough information and crystall ball not working. Perhaps the seller might be a better choice for support.

Looks like the question wasn't important enough to provide further information.
Sometimes I wish to be an admin with the authorization to delete whole threads.

TorstenH said:
Looks like the question wasn't important enough to provide further information.
Sometimes I wish to be an admin with the authorization to delete whole threads.
Click to expand...
Click to collapse
Oh dear.
It would have been useful if someone with the same setup had happpened upon the question and know the answer. Every other feature works fine so I didn't expected someone to put in days of work to solve the issue and, honestly, I'm not that worried about it.
FWIW I have not had access to the car since last I posted the original question, so have not been able to get more info. I realise it was probably very rude of me not to say that before but the post had dropped down so many pages I assumed it would fade into obscurity, like an 80s rock group.
I don't really want to get into an argument here, TorstenH, but are you a little bitter? Do you feel the world is treating you unfairly? It's the only reason I can see for that last post from you. I don't spend a lot of time on this forum and when i went looking for my post it was, something like, ten plus pages down so, as i said, I assumed it would be forgotten. Lighten up.