[Q] how to downgrade S.P.L 3.15 and flash it - P3300, MDA Compact III upgrading etc.

i am using htc artemis (p3300)
when i was i flashing it 2 days back,it got struck in middle,so i just removed the cable n tried to restart it ,now the phone got struck in boot loader showing
I.P.L 3.15.0001
S.P.L 3.15.0000
and nothing else.,
i tried to hard reset but it failed,tried to flash through SD card but showing invalid certificate error
so please any1 could help me in solving this error..............

Related

no software

I have rogers htc Touch. after trying unlocking the phone, my phone stopped working i tryied hardware reset it show it format but after that all blank it just dies, if some one can help
can you start your phone?
It power on shows HTC logo then stopped black screen, I tried loading rom after pressing Camera button and power it copy the ROM but still not boot.
Before I tried to do CID unlocking afterwhich the problem starts
Which gold card wont work for you?
Have you tried reading through the tutorials when CID unlock fails?
i tried installing Onyx_utl_4.6 & Tabish_rom_V3.3.6.1
It shows that it installed but not boot,
I can't found link to tutorials when CID unlock fails . Can you please send me Link
Thanks for you time and help

Trinity stuck in boot-loader mode after bad flashing , pls help

Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!

Htc Touch 2 T3320 Special Edition Stuck at Startup Logo..

Hi,
To all Masters,
I have an HTC Touch 2 T3320 Special Edition {India} Stuck at logo.I tried hard reset,i tried to upgrade it but i am facing an error 294 Invalid Vendor ID.Details on screen when i power up device and stuck at HTC startup screen are as follows.
R 3.50.25.15
G 61.48t.25.33G
D 1.32.72483
It is not updating with Gold card also.seems that only official rom will do the job but hard to find.Anyone with same issue has solved it or anyone with official rom link.
I tried to upgrade with {RUU_Mega_hTC_Asia_SEA_2G_WWE_1.32.729.3_Radio_Signed_61.48t.25.33_3.50.25.15_Ship}
It didn't work for me and returned with an error of 294.
NouB....
Moved to general as not rom development
NouB said:
Hi,
To all Masters,
I have an HTC Touch 2 T3320 Special Edition {India} Stuck at logo.I tried hard reset,i tried to upgrade it but i am facing an error 294 Invalid Vendor ID.Details on screen when i power up device and stuck at HTC startup screen are as follows.
R 3.50.25.15
G 61.48t.25.33G
D 1.32.72483
It is not updating with Gold card also.seems that only official rom will do the job but hard to find.Anyone with same issue has solved it or anyone with official rom link.
I tried to upgrade with {RUU_Mega_hTC_Asia_SEA_2G_WWE_1.32.729.3_Radio_Signed_61.48t.25.33_3.50.25.15_Ship}
It didn't work for me and returned with an error of 294.
NouB....
Click to expand...
Click to collapse
Finally revived it.....!
I changed the device Security CID with the help of Jtag and upgrade it
{RUU_Mega_hTC_Asia_SEA_2G_WWE_1.32.729.3_Radio_Signed_61.48t.25.33_3.50.25.15_Ship}.
This ROM has the { PB741300} Security Cid.
it worked for me...!
Regard
NouB..!

Boot loader lost Orbit 2

Dear Friends,
I need your kind help to get back my orbit 2,
I have flashed android built on nand and flashed update too, but it has stop working touch screen. so i tried to get back my windows rom back. but now i have lost windows default bootloader. i have tried all the buttons too with soft reset. but i am failed to get back. i have tried t remove battery then reset , also not working this trick.
When i power on, it start scrolling android booting...
is there any hope to get my phone back???
please help me...
link:
[SOLVED] Connection Error [262]. Stuck in bootloader (tri color) mode

HTC HD2 keep resetting its own.

Hey so i tried to install a different rom on the hd2 so i just downloaded another rom and tried to install it through the clockwordmod recovery. I formatted the sd card and wiped to the factory settings but it didnt install any roms and when i turn it on, it shows the tmobile logo and goes to the magdlr screen and it finally shows the cyanogen's android logo but it resets again and start all over again from the tmobile logo and it constantly does that. I am trying to reset my phone to the factory settings (windows 6.5) through the pda phone rom update utility but i get the error 260 (connect). my computer recognizes my phone but this doesnt. Please please please help!!! Thanks :/
did u install the right partition for the rom ? and for the connection error it does it when u dont have hspl installed

Categories

Resources