Related
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
isoDUB said:
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
Click to expand...
Click to collapse
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
T-Macgnolia said:
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
Click to expand...
Click to collapse
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
isoDUB said:
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
You can't have them all. You can have WP7 running from NAND and Android running through SD. Not too sure on the rest though.
Sent from my Nexus One using XDA App
isoDUB said:
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
T-Macgnolia said:
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
Click to expand...
Click to collapse
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
isoDUB said:
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
Click to expand...
Click to collapse
You know I can not say for sure if turning off the screen lock would solve your problem. But it sure is worth a shot so I say go for it and see. Also you can use a app like Touch Tools or BsB Tweeks to cut the lock screen off in Windows Mobile. Just do a search here on XDA or do a Google search for them and you will find them I recomend the Touch Tools this is a really great app. It adds a lot of tweeking ability to your HD2. I love it and have been using it for atleast 5 to 6 months now. Anyway if turn off the lock screen with one off these apps and it fixes your issue. Then you will know if you turn off the lock screen in Andriod it should have the same result. Heck if it fixes it you might just keep Windows Mobile ha ha just joking. I would not blame anyone for flashing a NAND Andriod ROM and getting rid of Win Mo. I personaly like Win Mo.
You're best off investing in a USB cable too lol. Your local hardware shop will have them. Its just a basic USB to micro USB cable.
I dont think any amount of tinkering with any OS is going to resolve your touchscreen problem............
The screen is cracked right?? Theres your problem.........
Could be issues with the digitiser as well because of this.
First job, new screen...........
i've been messing with the phone last night, and it seems the problem is related to the end call button. it seems whenever i try to wake up the phone with that button, it will freeze, while using the green button will wake up with no problem most of the time (>20% chance of freeze). it seems the freezing doesn't happen after a certain amount of time, since i left the phone in sleep all night and woke it up in the morning no problem. so in case anyone has the same problem as me and is too cheap to fix it, try only using the end call button when actually calling/putting the phone to sleep.
and where could i get a micro usb cable cheap besides online? i think t-mobile has them but they're like $10+...
it's dead again!
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Body said:
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Click to expand...
Click to collapse
isoDUB said:
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
Click to expand...
Click to collapse
Sorry to tell both of you but your problems are hardware related. Member isoDUB yours is most definitly a hardware issue, but it has been a little bit sense you posted that post so I hope you have got your HD2 fixed or are working on getting it fixed. Member Body yours sounds hardware related to cause if you flash another ROM and you still have the problem with your buttons then it is most definitely a hardware issue.
Best option is to send to HTC and see if you can get a new one for free if you are under warranty.
same problem
hi
im not original english speaking so please excuse my bad english.
a few days ago i got the same problem. the display doesn't work when the phone was waked up with the endcall button.
when i woke up the phone with an other button the display worked.
i sended it to htc an they just told me they will not repair it because it is not in the original contition.
i flashed it with the latest original rom from htc but they didn't tell me what is wrong in detail.
i answerd them an asked what is wrong but until now i didn't get an answer.
Hello, I have a similar problem. When you unlock the screen so we jump on the green but some spots that disappear after a while.
Disaster strikes !!! Same prob here !!!
its indeed something with the buttons ... Touch screen is dead ... but sometimes its workin!!
Three months ago ... I changed the case of the HD2 with a new one. The "old"one was full of scratches ...
I think yhat HTC is not gonna accept that ... the "void-label" on the screw is damaged...
What do you think Guys ??
Grtz
every where the htc hd2 screen problem ........... i think that every one who has the htc hd2 facing the screen problem we shopuld start the new thread where we that who has the htc hd2 without any touch screen problem
Have the same damn problem ..once the screen is locked ..its impossible to slide it to unlock ..previously it was working 50% of the time and now it doesnt work at all :-(( ..
Any suggestions ? ...I read alot on the forums and people seem to say that its digitizer related but the imp thing is to note that almost 98-99% of the people having this problem are frequent Android rom flashers ..so does Android have something to do with this and will flashing original stock rom back be the solution ??
So my HD2 freezes constantly. I don't have the unlock freezing issue nor the black screen freezing issue. My phone will just freeze quite constantly. Doesn't matter if I'm just doing a message, online, or it's just sitting there doing nothing. It will freeze and will have to remove the battery and restart it. I've reinstalled MAGLDR, CWM, and tried several ROMS and it still doesn't make a difference. I remove the battery and have to let it cool for around an hour just to turn it on and be able to use it for a period of time.
Any suggestions out there? Could the battery be bad? The hardware? I constantly use Task Killer and Data Eraser to make sure there aren't unnecessary programs running. I've narrowed my app collection to just the necessary ones that I need. Still doesn't make a difference. Any programs out there that would help with this issue in any way. Would repartitioning my SD card help at all. I have pretty much everything on my SD card as well so the hardware shouldn't be overloaded at all.
Any help would be greatly appreciated.
Thanks!
check here
LOADS of people are having this problem including myself.
As long as Mobile Data and Gps are OFF, I have no freezing issues.
BUT, if I turn on Mobile date or Gps, or both, then GAME OVER.....it freezes within seconds.
It's not your battery, or SD card and don't listen to the muppets who repeat themselves by saying "do a task29" coz it doesn't work.
I've tried 5 different SD card, got 2 hd2's, task29, over 100 roms, different radios etc etc.
Never used to happen on SD builds, only Nand.
if i had the cash, i'd smash my hd2 against the wall and get a Android native phone.
this aint ever gonna be solved.
matt
freeridindirtbiker said:
So my HD2 freezes constantly. I don't have the unlock freezing issue nor the black screen freezing issue. My phone will just freeze quite constantly. Doesn't matter if I'm just doing a message, online, or it's just sitting there doing nothing. It will freeze and will have to remove the battery and restart it. I've reinstalled MAGLDR, CWM, and tried several ROMS and it still doesn't make a difference. I remove the battery and have to let it cool for around an hour just to turn it on and be able to use it for a period of time.
Any suggestions out there? Could the battery be bad? The hardware? I constantly use Task Killer and Data Eraser to make sure there aren't unnecessary programs running. I've narrowed my app collection to just the necessary ones that I need. Still doesn't make a difference. Any programs out there that would help with this issue in any way. Would repartitioning my SD card help at all. I have pretty much everything on my SD card as well so the hardware shouldn't be overloaded at all.
Any help would be greatly appreciated.
Thanks!
Click to expand...
Click to collapse
Hi,
It might be worth trying to flash an original ROM and seeing if the same thing occurs in WinMo.
Have you properly formatted card? (overwrite with size adjustment)
Which rom are you using?
Does it do it on multiple roms?
Have you done a task29?
have you tried a different radio version?
TheATHEiST said:
Have you properly formatted card? (overwrite with size adjustment)
Which rom are you using?
Does it do it on multiple roms?
Have you done a task29?
have you tried a different radio version?
Click to expand...
Click to collapse
I've tried all those things. I'm using the Nexus 2 Gingerbread ROM by tytung. I've tried winmo roms, android, etc. I've done task 29 several times. Different radios as well. It doesn't make a difference at all. I found a thread that might be the culmination of it all. If anyone else is having problems like I am, take a look at this thread. It's definitely the motherboard overheating and freezing/and or shutting itself off.
http://forum.xda-developers.com/showthread.php?t=982454
Luckily, I pay insurance through t-mobile so I will be picking up a new HD2 pretty soon.
I had a similar problem, but mine came about under different circumstances. I smashed my HD2 against a wall for whatever personal reasons that you shouldn't care about, anyway, so I ordered a replacement display. When I installed the display the phone would freeze just as described by OP. I found that disabling GPS and WiFi allowed me to use it for a longer time, but if I ever so much as applied any pressure to the display (rather than just lightly touching it) the screen would freeze and sometimes it would just straight shut off until it didn't turn back on at all (this was barely the first day after installation). I opened the phone and tested, found out that the LCD flex cable had a defect to it where if it was bent (the position it's supposed to be in once the phone is assembled) the display would "short out" and with the cable fully extended no problems would be present, even after applying pressure to the display or any of the other internal components.
I'm sending my LCD back for a replacement and hopefully the new one will work fine. I've read that some LCD's cause the HD2 to freeze and I think I was unlucky enough to receive one such. I need the phone to hold on long enough until I get my contract renewal May 2012. I'm surviving on my Dream right now and I'm going through Angry Birds withdrawal...
Compatible-Bad Hardware-Insurance Questions
freeridindirtbiker said:
I've tried all those things. I'm using the Nexus 2 Gingerbread ROM by tytung. I've tried winmo roms, android, etc. I've done task 29 several times. Different radios as well. It doesn't make a difference at all. I found a thread that might be the culmination of it all. If anyone else is having problems like I am, take a look at this thread. It's definitely the motherboard overheating and freezing/and or shutting itself off.
http://forum.xda-developers.com/showthread.php?t=982454
Luckily, I pay insurance through t-mobile so I will be picking up a new HD2 pretty soon.
Click to expand...
Click to collapse
I have similar issue. Could use advice. Please.
My HD2 is about a year old. Decided to try android on the sd.
Device: HTC HD2 TMOUSA
Radio: 2.10.50.26 (Original) NOW flashed to 2.15.50.14
SPL: 2.10.xxxx (Original) NOW HSLP 2.08.0000
Android Rom: SD AmeriCanAndroid AOSP HD2 GB234 CM71
WM Rom: 2.13.531.1 (Original)
ACA seemed ok but would freeze randomly. So I flashed the radio to the 50.14. Seemed a little better but still a few freezes in android. Thought I would try the partition to improve the sd card performance. can't tell if it helped or not to many freeze ups to use android during the day. NOW my winmo side it giving me random reboots. It gets hot reboots, especially bad if using gps. I know overheating is part of the issue because during the middle of the day in my car without A/C it is terrible.
I also have an OTTERBOX Defend which has kept the phone looking great but is a really pain with on all the battery removal with the freeze ups.
I have read that this can be a mainboard issue, but how can I tell if it is or not?
Could the radio and winmo rom be incompatible?
Should I flash the winmo rom to a more compatible android rom?
Should I send it in since I have TMO insurance? (Anyone know if there is a deductible if you didn't lose the phone?)
I have also noticed the on the winmo side it reboots less if I turn htc sense off.
Not sure if I should go back to a different radio or send it in?
Are the insurance replacements refurbished or new? do they have the same issue?
Thanks for any expertise you care to share.
Had similar problems with Tmous HD2. Problems were really bad in Winmo; aca worked somewhat better. Read forums, tried standard "solutions". With time the problems got to the point where the HD2 would not boot unless it had been placed in the refrigerator for 5 minutes.
Did T-Mobile warranty exchange in April. Replacement was refurb (arrives without battery or sd card, used old one), but looked fine. Had a week to test "new" phone, before sending the old one back. Replacment phone works much better. In Winmo, gps, videos, sense no longer cause reboots; aca also works great.
Hope this helps...
TheATHEiST said:
Have you properly formatted card? (overwrite with size adjustment)
Which rom are you using?
Does it do it on multiple roms?
Have you done a task29?
have you tried a different radio version?
Click to expand...
Click to collapse
Exactly as my post from a few days ago predicted..."task 29"
FFS.
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Does the area beneath the battery shell, behind the phone, feel particularly hot? If so, it's likely overheating (HTC calls it a current leakage... something?) and if you're under warranty you may wish to send it back.
Otherwise, there are fixes (suck as devising your own extra heatsink, reflowing the solder).... but it's non-trivial.
Does it freezes while using any particular applications, and what happens when it freezes???? I mean does it get to normal by itself or you have to pull the battery out and restart your HD2.
I am asking this because I was also having the same issue with my previous HD2, and then I came across this post
http://forum.xda-developers.com/showthread.php?t=1189544
which explains a lot about bad blocks which affect the android build.
DutchMaster117 said:
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Click to expand...
Click to collapse
dude, u need to give the detail of your problem, when and how it freezes. Cuz there are lot of problems by which a phone can be freezed up.
hstr said:
dude, u need to give the detail of your problem, when and how it freezes. Cuz there are lot of problems by which a phone can be freezed up.
Click to expand...
Click to collapse
yea sorry im just at the point where idk what else to do.
Lemme be more specific about this.
Theres times where it would actually boot up to where i can make a call but only for less than a couple minutes most of the time. There are times where i get lucky and it stays on for a good while ( couple hours ) and it'll stay that way as long as i dont use it. It freezes up starting up just about any app so i have this odd feeling it might be my sd card. But then i dont understand why the next thing happens. After i remove the battery and put it back in and boot either 1 of the 3 happens.
1) 1EFATAL HIT 1
2) Gets stuck on Go go go
3) gets stuck after go go go when rom tries to boot up.
Only thing i can do to get it to boot up again is take the battery out and leave it out for a good 10-15 minutes.
I tried Task29 and reinstalling magldr, cwr, and Rafdroid Rom and i still get the same crap
The Phone gets a little warm under the cover sometimes but its right were the micro sd is located
I'm having the same problem. My HD2 will freeze if I play games on it causing me to pull out the battery and when I boot it up, sometimes it will freeze at the MAGLDR screen, will freeze as soon as the rom boots. Right now my phone seems stable and I'm only using it for texting and making calls and nothing else for the fear of damaging the phone any further. I have a TMOUS phone btw.
DutchMaster117 said:
yea sorry im just at the point where idk what else to do.
Lemme be more specific about this.
Theres times where it would actually boot up to where i can make a call but only for less than a couple minutes most of the time. There are times where i get lucky and it stays on for a good while ( couple hours ) and it'll stay that way as long as i dont use it. It freezes up starting up just about any app so i have this odd feeling it might be my sd card. But then i dont understand why the next thing happens. After i remove the battery and put it back in and boot either 1 of the 3 happens.
1) 1EFATAL HIT 1
2) Gets stuck on Go go go
3) gets stuck after go go go when rom tries to boot up.
Only thing i can do to get it to boot up again is take the battery out and leave it out for a good 10-15 minutes.
I tried Task29 and reinstalling magldr, cwr, and Rafdroid Rom and i still get the same crap
The Phone gets a little warm under the cover sometimes but its right were the micro sd is located
Click to expand...
Click to collapse
Last question to u, that when u had ur stock windows rom in ur mobile , does any thing happened like this.
if not, then the problem is not in your mobile or sdcard, the problem is in the method u are intalling by.
1)try to get back to windows mobile.
2)install hardspl4 - 2.08 (not Hardspl3 - 2.08)
3)install magldr 1.13 (not magldr 1.11)
4)install clockworldmod recovery 3.0.0.5 (if ur rom is a cwm rom.)
5)Now flash the rom.
6)give it a try, if not any issue, then
7)push the thanks button. .. lol
hstr said:
Last question to u, that when u had ur stock windows rom in ur mobile , does any thing happened like this.
if not, then the problem is not in your mobile or sdcard, the problem is in the method u are intalling by.
1)try to get back to windows mobile.
2)install hardspl4 - 2.08 (not Hardspl3 - 2.08)
3)install magldr 1.13 (not magldr 1.11)
4)install clockworldmod recovery 3.0.0.5 (if ur rom is a cwm rom.)
5)Now flash the rom.
6)give it a try, if not any issue, then
7)push the thanks button. .. lol
Click to expand...
Click to collapse
That's actually the same thing I do.
Alright I know this might sound ridiculous but it seemed to work ( so far ). After 6 hours of trying to get this phone to work I decided to try something I saw on another thread. I got an icepack and did a complete install while having the phone on the icepack to keep it from getting warm. To my suprise it worked... I'm using my phone now with no issues yet and its been about 12 hours and it hasn't frozen yet. Although it did do a random reboot once ( I have a few bad blocks so I'm guessing that might be the reason). But Yea this worked for me some how. I'll update on any issues I get as soon as I can.
Sent from my HD2 using XDA Premium App
Same problem for me. My hd2 always freezes with any sense ui android build. MIUI and Nexus HD rom works fine.
My simple advise is... reinstal windows. And try again.
This worked for me when i started with the HD2.
Sent from my mercury using XDA App
Hi I had the same problem, but I sent my phone for repairs and it never froze again. According to HTC they just replaced the main board. But before I did that I actually flashed the official RUU (windows 6.5), and it continued to freeze, so I was quite sure it was a hardware problem. Indeed after repairs my phone didn't freeze anymore.
Sent from my HD2 using XDA App
DutchMaster117 said:
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Click to expand...
Click to collapse
I also had 2 x HD2 which did this.
Froze when got to hot, or if using gps or mobile data.
Sold it 2 weeks ago, now own Desire HD and it's BRILLIANT!!
So now ive been running rafdroid on the phone without an sd and it runs.. but laggy since theres almost no space left in phone and it isnt getting hot. It only gets hot when it operates with the SD inside.
anyone know anything about that?
same problem
i have the exact same issues. the phone freezes every time it boots, be it magdlr nand, sd, wm 6.5 anything. however my old hd2 had no problems at allbut i broke it changing the screen digitizer and lcd.
(the white plastic on the connector that connects the lcd and digitizer to the main board broke.)
im pretty sure the reboots are mother board related but i don't know if telling tmobile or htc that will do anything because the phone is old. (i got this other hd2 from a guy on craigslist.)
I had the same freezing problem with my HD2. After all the research I've done, none of them worked. Then i put the phone into the freezer for a minute and took an ice pack, placed it on the back of the phone where CPU is located. While holding the ice pack, I re installed the ROM and at the and freezing issues were solved. It never froze again.
I hope this solves your problem too.
oztorque said:
I had the same freezing problem with my HD2. After all the research I've done, none of them worked. Then i put the phone into the freezer for a minute and took an ice pack, placed it on the back of the phone where CPU is located. While holding the ice pack, I re installed the ROM and at the and freezing issues were solved. It never froze again.
I hope this solves your problem too.
Click to expand...
Click to collapse
I want to ask whether this cooling trial fixed freezing problem forever? suppose if u use your set for more than for hour streaming over wifi? never it got freeze again?
The best solution that you can flash back to WinMo 6.5 and run Android from SD Card.
I have the same issue... but...
Make a complete instalation with an ice pack?? Are u joking me?? It works??
well... i have not to lose... i will report if i try it...
I flashed stock rom and run android from sdcard. but when i press Haret.exe is going to HTC green logo and after restarting. some solution?
Similar problem
I have a similar problem. But with two different phones.
I bought LG Optimus One about two years ago. After a few months, some freezes appeared... I've sent it to manufacturer three times and every time they changed some parts... but nothing have helped. I've made some experiments (another battery, SIM card, MicroSD card, custom ROMs) and than I realized, that the problem occurs only while the mobile internet is ON.
This summer, my friend offered me used HTC HD2 and I bought it. He used to have Android there with no problems. After a few weeks, the freezes occured again. And again: I can surf internet all day by wifi with no problems, but when I tunr on the mobile internet (MI), the phone freezes. The back cover of battery is a bit hot, but this appears while long using the phone too without MI (without freezes).
I've tried almost everything to solve this problem: changed SIM card, changed SD card, everytime with flash of the newest ROM... nothing helped.
I'm not sure if the problems with LG OO and HTC HD2 have the same reason, but I can't believe I can buy two phones with similar problems without transfering them.
What aboutthat crazy plan of flashing with ice cooling? Does it work afret a few months too?
PS: Sorry for my English
Installed IceCreamTosti HD2 ROM 0.9 worked well for a day or two then all of a sudden my screen would stop working when it went to sleep. I researched and found that there is an undervoltage script that could be causing this problem. So i deleted the script. Then it started happening again. Task29'ed, installed HyperDroid Gingerbread Xtreme to see if that would fix my problem, nope still happening. It works when it wants but the funny thing that if I get it to work, I can use it until I have to go back to the previous screen, then I would have to hit the power button to put it to sleep, unlock it for the screen to become responsive. I know it sound like a Digitizer problem but I was wondering if anyone has any other suggestions before I buy it.
Thanks!
read here http://forum.xda-developers.com/showthread.php?t=993787
I've already read that. Thanks
Im just seeing if it could be a Kernel problem or something of that sort.
I've had this problem on one of the ROMs i used, not sure which one since i didn't stay on it for to long.
After i flashed a different ROM it fixed it. This might seem like a lot of work but why not reinstall MAGLDR,
CWM & a new ROM. Maybe try RAFDROID HD. Yes i know its a really old ROM but its a goodie and this
would be for test purposes anyway. You can always switch back.
I read the mentioned thread before too and im sure it does sound like it happens but since it happened so
soon after you installed a new ROM it makes me think its the ROM, eventhough you tried to reinstall a
different one. Maybe you can make a backup of your SD card and repartition both your phone and SD.
PC10DaTruth said:
Installed IceCreamTosti HD2 ROM 0.9 worked well for a day or two then all of a sudden my screen would stop working when it went to sleep. I researched and found that there is an undervoltage script that could be causing this problem. So i deleted the script. Then it started happening again. Task29'ed, installed HyperDroid Gingerbread Xtreme to see if that would fix my problem, nope still happening. It works when it wants but the funny thing that if I get it to work, I can use it until I have to go back to the previous screen, then I would have to hit the power button to put it to sleep, unlock it for the screen to become responsive. I know it sound like a Digitizer problem but I was wondering if anyone has any other suggestions before I buy it.
Thanks!
Click to expand...
Click to collapse
After reading the other guys thread about the end key it does seem like a bad digitizer . i read other threads explaining your exact same issue . the only way to figure out if its ROM related is to flash the stock winmo 6.5 ROM . yes , i said it , winmo but thats the last resort before deeming something hardware related . if you tried the end key option , pressing really hard on the key , then i guess i would change tto winmo and try to see if it still happens then
I do have to admit it could just be coincidence and the digitizer went up but considering this happened
only a few short days after he installed a new ROM makes me feel that there is a possibility its the ROM,
or maybe even the partition he changed (if it applies) when flashing that ROM over. I still suggest to start
over from MAGLDR on, including repartitioning your phone to the proper needs of the new ROM to see
if it helps before doing something drastic like reverting back to winmo.
Thanks for the help everyone, opened the phone up. Was hard as hell! But I cleaned the dust on the contacts under the end button, still no luck. I bought a new phone. Going to get a digitizer down the road and fix this one, If anyone want to buy it just let me know.
You will get a lot more people to see your interested in selling the phone if you post it in the xda marketplace found here.
Just open a new thread there and post how much you would want for the phone. I'm sure people would be interested
especially when you can get a new digitizer off ebay for so cheap.
change an other rom,if the problem still exist,i am sorry to tell u that u should send it to fix the touch screen..
Hello everybody!
I have a serious problems with my Streak. Few days ago, i installed an update from DSC v1.1 to the DSC v1.7. Two or three days everything was fine but then started a hell.
First problem, which appeared, was that it reboots itself. Anytime, for no reasons. Doesnt matter if I was working on the Streak or device was on the table. Then next day came the second problem, which is much more worse. When I was calling somebody from my Streak, the person on the other end was not able to hear, because everything was "lagy". Phone call was discontinuous.
I tried to reinstall that ROM (DSC v1.7), to perform a factory reset or go back to the previous version of DSC ROM.
Then new problems appeared - nothing is running now on the Streak, and most applications or processes is ended on the startup. And phone calls are still discontinous.
There is only one hope, is it possible to get back all the stuff from factory? I mean completely - ROM, kernel etc.
Thanks for every idea and help.
(I am sorry for my english).
Read this topic, you will know what to do after that.
From HERE:
_2bad4u_ said:
100% the problem comes from internel sd card, i used to have this problems, after testing dif. rom and settings, i got the impresion it was from the internel sd card and change it, and no more reboot problems, it's a good thing because i could sell it, and i sold it last week.
Click to expand...
Click to collapse
Thanks for helping. This can solve problems with rebooting, but do you thing thats the reason for problems with GSM - Cell phone network?
Try it, and then you tell us if it's that the problem or not. Because i suspect the sd card, but maybe there is a problem with the streak.
is flashing another ROM doesn't solved the problem?
Sent from my Dell Streak using Tapatalk 2
Flashing another ROM doesn't solving this problem on my device. I will try to replace the internal SD card tonight and I will post news about it.
Rebootinf - fixed, phone calls problem not.
Hello everybody.
Yesterday, I tried to change the internal SD card in my Streak to solve problems with booting and with the discontinuous phone calls. And here is the result:
Problem with rebooting was solved, but not with the phone calls. I found only one solution to fix the problem with phone calls. I took screen from this Streak and I put it into another one with broken screen (which I had, because it was cheaper to buy a used Streak than new screen). So I made from two devices, with a different problem, one device which is working fine.
I think that there was some problem with Main Board.