Hi,
The LED on the front panel has became very dull. It's barely visible if my phone is charging or I've received any message. Is there anything that i can do to increase the brightness of this LED?
Regards,
Naveen
Clean it ... i did and it's brighter now ...
LtBlue said:
Clean it ... i did and it's brighter now ...
Click to expand...
Click to collapse
Thanks for the reply LtBlue. Is there any way through which it can be opened to clean?
Hi,
Does anyone know the link which can show how to open the front panel of Touch2?
You have to dissasemble the hole device to get to the front panel , I cleaned mine with a toothbrush , also applied 1-2 drops of water onto the brush but be carefull !!
Hi LtBlue.. Another trick worked.. Used a Safety Pin to clean the holes.. It worked.
naveenbhatia said:
Hi LtBlue.. Another trick worked.. Used a Safety Pin to clean the holes.. It worked.
Click to expand...
Click to collapse
I'm glad to hear that be carefull doing that otherwise u'll scrath the paint ... the metal is silver and it's really noticable once chopped ...
Related
noise when shake the phone or when hit with finger. this is normal ? look like a little vibration.
the same here.
perhaps it is the g-sensor?
does somebody know more?
Mine does not.
-Sie- said:
Mine does not.
Click to expand...
Click to collapse
put your phone in hand and bit with the finger( drop the finger on the buttons, on the metal or on the back)
It's a setting in your phone, i'll translate it from a Dutch device:
Goto Settings and click on the left bottom of the screen on More.
In Tab: System you will find: TouchFlo.
Inthere you can (un)check if you wan't your phone to vibrate or not when touching the screen.
In some occasions my phone still vibrates but i don't find it anoying so i didn't bother that and don't know how to change it.
criszz said:
put your phone in hand and bit with the finger( drop the finger on the buttons, on the metal or on the back)
Click to expand...
Click to collapse
And your phone drops on the floor and the vibrating is gone because phone is broken.
Tom Lenferink said:
And your phone drops on the floor and the vibrating is gone because phone is broken.
Click to expand...
Click to collapse
lol i never droped my phone
criszz said:
put your phone in hand and bit with the finger( drop the finger on the buttons, on the metal or on the back)
Click to expand...
Click to collapse
Nope sorry, no vibration here just the sound of my finger against the case. For example it doesnt rattle/vibrate etc when shaken either.
I read in czech forum about that noise. Somebody wrote there, it could be shade of camera. ???
prdic said:
I read in czech forum about that noise. Somebody wrote there, it could be shade of camera. ???
Click to expand...
Click to collapse
noise is in bottom part of the phone
I've read about noise nearby camera lens
My phone also does it, I thaught it might be coming from the vibrator inside.
prdic said:
I've read about noise nearby camera lens
Click to expand...
Click to collapse
I have this problem... But i don't care... it's not annoying or something...
It just when i tap on the back, can't really subscribe the sound
omar302 said:
My phone also does it, I thaught it might be coming from the vibrator inside.
Click to expand...
Click to collapse
i do think so , just hoping it's not a big problem.
what was the noise by the camera lense? do you have a link?
Hi
I think it is the accelerometer, my laptop which has one to detect if it is falling also makes the same noise.
Regards
Phil
what is the accelerometer? is it normal then or something to worry about. if you tap the top of the phone with your finger you can hear something like a faint ratle or something along them lines.
I think i know the sound you mean, and if we thinking of the same sound its the focuus in the camera. you hear the same sound after you take a photo and the focus releases
Hi
I think i know the sound you mean, and if we thinking of the same sound its the focuus in the camera. you hear the same sound after you take a photo and the focus releases
Click to expand...
Click to collapse
Could be indeed. The lens is suspended on a wire spring so an electro magnet can move it in and out to focus. So it would move about if the camera is shaken.
An accelerometer of the type in our phones I think is the same sort of thing, a magnet or coil of wires suspended on a wire spring so it can move about.
The noise is normal.
Regards
Phil
Hello,
I have the same noise... i think that is the camera lens or the stylus... not a big problem...
hey
my magician falled from my hand
bat and bat cover droped off !
after i reattached them to my mag it made a hard rest but with no back light
it works fine now but now back light at all i went to settigns
and raised back light to top but no thing changed can any body help me plzzzzzzzzzz
dump :
now i detached the screen golden cable from main bored and reattached it back
now back light is fine but screen on blue first screen is white then more colored lines apears and then i see mobile 6 grean screan at the midle of screen but not clearly !
i repeat the process again but with the same result ?
give it to me... I need it for developing new FP
err... I think LCD is broken...
no lcd is not cracked or broken like it was !
khaledvic said:
no lcd is not cracked or broken like it was !
Click to expand...
Click to collapse
send it to me lah...
give me pic please...
LCD Connector damaged?
maybe but i don't think cuz its enter till it touch some thing inside the white adapter
then it enters frm one side only left or right but not both like there is som thing in !
opps i can't try couttula works any more !
Hi everyone one
I'm not sure this is the right section for my topic, if not I'm sorry and pls direct me.
So I got this phone from my brother whith a weid screen he has no idea how he got this problem, it had a charging issue that he already repaired after that this problem appeared
The phone screen looks a bit weird no scratches or visible damag. but the screen is blurry the contrast is a so hight that the colors are a bit off and are not seamless, and there is this stains as if the screen is brocken (see atached pictures), so far if I hide the upper bar the rest of the screen will looks normal as if there's no problem with it
Any Idea on how to fix this problem is the screen damaged ?
Thanks in advance
No fixing that I doubt, unless the cable for the screen is loose, in which case I still would not try to fix it yourself unless you're very patient and have steady hands.
To fix, you need screen replacement.
According to samsung technician at service center, the purple strain damage are caused by having the phone being press on or under high pressure such as putting the phone inside tight jean pocket or being sit on etc.
Sent from my SM-G935F using Tapatalk
Thanks for the help guys, I opened the phone and checked there is nothing pushing the screen or any visible damage
**update**
Good new the screen went back to wotk notmaly 3 4 days after wotking intensly with the phone using an app called twilight, it helps remove the stains when activated blut it's a blue light filter
Now the phone work well without that app
Thanks
Hello,i don't know if this is correct section where to describe this problem,but anyway is just an question so let it go.
Like title says,on Nokia 6 there is a problem with buttons design or i broke them ? Because i can see the backlight from LCD through power button,its just a very small space betwen aluminium body and those button,
where you can cleary see the light from screen.
I observed this after i did an hard reset,and i pressed maybe a bit to much power + volume up buttons,but they're working fine.
Also remember,in order to check this for me,do it in a dark place with LCD brigthness at least 50%,and move your phone whille looking at those buttons,you can only see the backlight from two differents angles,at least on mine.
So please check and report back to me,to know if this from design of the phone,or i broke them in some way.
My phone is global version,TA-1021,my english is bad sorry for that,i hope you understand me.
Normal, my ta-1033 is equal.
It's a build default.
wolfpower95 said:
Normal, my ta-1033 is equal.
It's a build default.
Click to expand...
Click to collapse
You mean you can see an very small light from these buttons too right ? I barely see the light without case that cover those buttons from scratches & dust particles.
Marius.Petran said:
You mean you can see an very small light from these buttons too right ? I barely see the light without case that cover those buttons from scratches & dust particles.
Click to expand...
Click to collapse
Yes! I have a transparent cover, and I have the same "issue".
It's normal, don't worry about it.
Hello I'm wondering what is the white plastic circle next to the top microphone I know for certain that it is not the proximity sensor so what the hell is it.
BAHKOne said:
Hello I'm wondering what is the white plastic circle next to the top microphone I know for certain that it is not the proximity sensor so what the hell is it.
Click to expand...
Click to collapse
Do you have picture of this?
jtonius said:
Do you have picture of this?
Click to expand...
Click to collapse
It doesn't matter any more bro I've completely destroyed the phone and I've moved on thanks for the reply any way
Heyyo, the white plastic circle is the light sensor which is use to detect how bright the area is around the phone for automatic brightness
My condolences on your phone breaking