does anybody install the destinator3 on an XDA II? the install programm can't found the memory card, can see only the main memory and the virtual the memory of 14,5mb.
thanks for your help.
I think a patch has been released for use with activesync 3.7.
I used the patch for destinator3 from the destinator2.com web site but doesn't change, I was got the same problem with the destinator 2 software, I can install the program but I can't install the maps on the secure digital card.
If I remember correctly, I think it is possible to copy the maps to the storage card without using install, just put card in card reader and copy files as usual but make sure directory structure is correct.
I tried but the card is protect from writing! you can do it only with a brand new card, I tryed to format the card but it writing protected, do I could put it in a boiler or in a microwave to restore it?
I wouldnt bother with the microwave or the boiler, a melted card wouldnt hold maps. Check if the switch on the card is in correct position. You should be able to format the card, if you cant format or write to it then I suggest it may be faulty/broken.
I know, the switch is in the right position, and is the same with both cards one 256 and one 128mb.
I wrote to the destinator help desk and I'm waiting for a reply, I hope they found a solution.
thanks for your help.
fabio said:
I know, the switch is in the right position, and is the same with both cards one 256 and one 128mb.
I wrote to the destinator help desk and I'm waiting for a reply, I hope they found a solution.
thanks for your help.
Click to expand...
Click to collapse
Ciao, dove hai acquistato destinator 3 ?
Grazie.
;-)
ho fatto l'aggiornamento sul sito destinator1.com, mi è arrivato in 24 ore, troppo simile a tom tom ma è un gran bell'oggetto, funzionasse!
fabio said:
ho fatto l'aggiornamento sul sito destinator1.com, mi è arrivato in 24 ore, troppo simile a tom tom ma è un gran bell'oggetto, funzionasse!
Click to expand...
Click to collapse
Grazie! :wink:
This the answer of the Destinator support team:
Please follow the instructions below if you experience any problem with selecting Storage Card under 'Select Target Device' in the Installer.
1. On the original Destinator CD ROM, open a map folder, for example America.
2. Select a folder with a map you want to install i.e. USA-1etc.
3. Open the selected folder and unzip USA-1.zip
4. Sync your PDA with PC. In the root directory of your PDAs Storage Card create a folder Paradigm
5. In the folder Paradigm, create a folder with the same name as the one you selected on the CD ROM i.e. USA-1 etc
6. Copy all files from unzipped folder incl. WCE.Txt into the new folder on your Storage Card
If you have any other questions please feel free to contact us via email and we will gladly assist you.
Thank you,
Destinator Technical Support Team
They reply me in less than 24 hours, thanks a lot, fabio.
I have this not note evry time i reset my compact "Your SIM card has no application installed". Evrything works ok.
Does anybody now how to remove this not?
This also happens with me whenever I soft-reset the device after it hangs!
When I reset the device normally thru software, it won't show!
I donno why it appears! everything just works fine after this msg shows up.. :?
Go to \windows\startup folder, and delete STK shortcut there.
Best regards,
Arto
Yeaaaaaah it worked! :lol: Thanks a lot Artosoft :wink:
Hi
I just bought the Magic and inserted my dual sim card.
Unfortunately I can't find the stk in the programs menu.
I read in internet, that this should be there by default.
what am i doing wrong?
Rgds
update: i'm on version 1.5 where sim toolkit should be inclusive?!
check ur magic if there is a "stk.apk" at /system/app menu
if not maybe ur room did not added it
u should flash a new rom which is very latest version with stk.apk
I downloaded the stk.apk from this forum and tried to install.
but it does not allow to install and it also doesn't allow to copy it to /system/app
Hi All,
For some reason i'm unable to import contacts from my SIM to android ( MDJ Gingerbread v0.9 )
When i tap "Import Contacts from SIM" it says: "No contacts on your SIM" however all my contacts are on my SIM?
NLCandyman said:
Hi All,
For some reason i'm unable to import contacts from my SIM to android ( MDJ Gingerbread v0.9 )
When i tap "Import Contacts from SIM" it says: "No contacts on your SIM" however all my contacts are on my SIM?
Click to expand...
Click to collapse
Check this link and read post #769:
http://forum.xda-developers.com/showthread.php?p=10010754&highlight=contacts#post10010754
deadmansink said:
Check this link and read post #769:
http://forum.xda-developers.com/showthread.php?p=10010754&highlight=contacts#post10010754
Click to expand...
Click to collapse
Thanks for your response but that was set ok allready..
What i did now is:
- I exported all my SIM contacts to .vcf files (vCard) via Windows Mobile.
- Then i imported all the vCard files into my google account.
- Then i synchronized my google account with my phone.
And now all contacts seem to be there
Anyway, thnx for your response
I try to put [ROM] CM9 4.0.4 ICS HTC HD Mini without success. I'm stuck here : http://postimage.org/image/ygfbc0wyh/
How risky is this method http://forum.xda-developers.com/showpost.php?p=33344567&postcount=804 ?
I try the method described here http://forum.xda-developers.com/showthread.php?t=1041988 but with "00028002 Not allow" error ... I try it om 4 different types of sd.
Have anyone other methos/ solution ?
Thank you.
PS. I try to create a goldcard like here http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/ (here http://psas.revskills.de/?q=goldcard i choose windows mobile 7) and then i copy PHOTIMG.nbh on card. After restart, i have the same "00028002 Not allow" error"
Maybe i shoud generate goldcard for wm6.5 ?!?
Can anybody help me with that ?
Thank you all for responses.
This thred can be closed !