saphire pvt 32b eng s-off h
hboot-1.33.2010 (SAPP30000)
cpld-10
radio-2.22.27.08
june 2 2009, 17:27:03
I was trying to flash Ginger Yoshi rom but I think I flashed the wrong SPL and now is stuck at fastboot screen not able to get to recovery mode. I flashed a few roms before but is really a newbie. I read another posting with similar problem and saw that someone suggested flashing recovery img again but I don't know how to do that. Please HELP!
Julie2010 said:
saphire pvt 32b eng s-off h
hboot-1.33.2010 (SAPP30000)
cpld-10
radio-2.22.27.08
june 2 2009, 17:27:03
I was trying to flash Ginger Yoshi rom but I think I flashed the wrong SPL and now is stuck at fastboot screen not able to get to recovery mode. I flashed a few roms before but is really a newbie. I read another posting with similar problem and saw that someone suggested flashing recovery img again but I don't know how to do that. Please HELP!
Click to expand...
Click to collapse
Ah, very easy to fix. You need to get fastboot installed on your computer and verify that it can see the phone (plug the USB cable in after booting into fastboot) by issuing the following command from the folder with fastboot in it:
Code:
fastboot devices
Let me know when you get there and what the results are.
Sent from my HTC Glacier using Tapatalk
After you issue the fastboot devices command, you should get your phone's serial number back indicating that your computer and phone are talking. Then you need to download this recovery and this hboot. Copy both those files over to the folder that has "fastboot.exe". Back at the command prompt issue the following commands:
Code:
fastboot flash hboot hboot-1.33.0013d.img
fastboot flash recovery recovery.img
fastboot reboot-bootloader
That should reboot the phone back into the bootloader and you should now have the 1.33.0013d SPL. You can then boot the phone into recovery mode and flash Yoshi.
I installed fastboot and was able to see my device.
HT96XLV04762 fastboot
But was unable to flash the 2 files.
error: cannot load 'hboot-1.33.0013d.img'
error: cannot load 'recevery.img'
After playing around a bit i was able to get to recovery mode by pressing power+home. I did a nandroid restore but still could not get passed the green screen...
Julie2010 said:
I installed fastboot and was able to see my device.
HT96XLV04762 fastboot
But was unable to flash the 2 files.
error: cannot load 'hboot-1.33.0013d.img'
error: cannot load 'recevery.img'
After playing around a bit i was able to get to recovery mode by pressing power+home. I did a nandroid restore but still could not get passed the green screen...
Click to expand...
Click to collapse
That's because your nandroid probably isn't cool with the SPL. Did you copy the files to the same folder fastboot is in?
Sent from my HTC Glacier using Tapatalk
Yes fastboot is in C:\android and the files are in the same directory.
Julie2010 said:
Yes fastboot is in C:\android and the files are in the same directory.
Click to expand...
Click to collapse
Did you rename the files?
Sent from my HTC Glacier using Tapatalk
That was just a typo on my previous posting. Am I supposed to rename them though?
Julie2010 said:
That was just a typo on my previous posting. Am I supposed to rename them though?
Click to expand...
Click to collapse
No. Download them and put them in the folder again. If you have the newest version of SDK the folder should be \AndroidSDK\tools.
Sent from my HTC Glacier using Tapatalk
It worked. I download a new version and was able to replace the SPL file. Thank you!
I was able to flash ginger yoshi but now only has H connection instead of 3G?
There were these errors when flashing in recovery mode:
E: Missing bitmap progress_empty (Code-1)
E: Missing bitmap progress_fill (Code-1)
choice: error fixed, please ignore
Does these errors have anything to do with why I no longer have 3G?
H stands for HSDPA which is enhanced 3g. Ginger Yoshi ditinguishes between regular 3g and HSDPA. So it's a good thing you have H instead of 3g. For more detais you could google HSDPA.
I was just reading out that on Google. Thanks for the quick reply. Do I need to worry about the missing bitmap error?
Nope because "choice: error fixed, please ignore"
Related
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I flashed the 2.22.23.02 through fastboot by mistake and now I can't get into recovery mode, or flash any other radios onto the phone. The fastboot menu is the only thing I can get to on the phone.
I tried reflashing the 2.22.23.02 again but it won't go through...
Anyone have any ideas on what I can do to unbrick it?
Edit: Tried sappimg.nbh via volume down and power button but i get a Model ID error. Now i can't fastboot anything over to my phone.
Edit: Flashed the sappimg.nbh, sappimg 2.16.707.3, sappimg 2.53.707.2, via gold card but I now get the error: Main Version is older!
I have answered similar questions before...
Use the search function.
But to get you started here is a quick solution.
1) flash eng spl that starts with 1.33.20XX where XX can be 05,09 or 10.
Restart into fastboot.
2) flash the right spl/radio/recovery combo.
This is confirmed to work....
Next time post ALL fastboot info... there are some info mission in your post!
all the fastboot info...
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I have just tried flashing hboot-1.33.2010 via fastboot.
However, I get the error message:
sending 'hboot' (512 KB)... FAILED (remote: not allow)
do this:
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
in http://forum.xda-developers.com/showthread.php?t=605239
Unfortunately... I can't boot into recovery either, nor can i push a recovery image to the phone. I get the same error: "fastboot:remote not allow".
ok... you are very limited...
Do this:
Find a suitable sappimg.nbh... Not sappimg.zip...
Use this which i just uploaded for you:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Using your goldcard flash the sappimg.nbh in fastboot.
The sappimg.nbh does not need any unzipping... it's a complete img of the nand and overwrites everything.
I can't seem to find the answer to this anywhere....
is there a way to create a goldcard at this point for me?
I can't get into debug mode on the phone (for obvious reasons) and therefore can't do adb....
Find ANY android device and make a goldcard...
Then use the goldcard on your device...
wouldn't suppose anyone have the goldcard.img from their email that they could send me...
1)Download the -G magic RA recovery
2) rename it to recoveryG.img
3) run 'fastboot boot recoveryG.img' (with the phone in fastboot mode)
4) allow recovery to boot then run the following adb commands
Code:
adb push recoveryG.img /tmp/recoveryG.img
adb flash_image recovery /tmp/recoveryG.img
5) Now power down the phone
6) boot into recovery by holding home+power
10) flash 1.33.2009 or 1.33.2010
Now you will have fastboot again
Most likely you will want to find and flash via fastboot radio 3.22.20.17 if you are not a Rogers/Fido customer or have signed the e911 wavier, otherwise you want 3.22.26.17..
After flashing the 3.x radio flash RA -h recovery via fastboot (and while in fastboot run 'fastboot erase system -w'); this will let you flash the ebi1 rom of choice
I just downloaded the recovery-RA-sapphire-v1.7.0G.img
renamed it so recoveryG.img.
When i try to run the command: fastboot boot recoveryG.img
I get the error message:
downloading 'boot.img'...FAILED (remote: not allow)
Then its best to just install the official e911 ruu from rogers and re-root
I have tried that, but it doesn't work...
What's your fastboot info?
Sent from my HTC Magic using XDA App
isn't the info on my first post the fastboot info?
bigbrotherbear said:
isn't the info on my first post the fastboot info?
Click to expand...
Click to collapse
Yes, I'm also not sure why people are ignoring that fact that you can't use fastboot either :-S
My bad, using my phone and completely missed the first page.
EDIT: I think mum was on the right track. Your going to need a goldcard. No one will be able to send you their .img because its SD card specific. You don't know anyone with a Android based phone?
Sent from my HTC Magic using XDA App
Looks like i'm getting progress....?
I have a gold card now thanks to my friend, however...
when I try to flash the SAPPIMG.nbh I get a Main Version is older!
I also tried the 2.53.707.2 SAPPIMG.zip and I still get this error.
I also just tried 2.16.707.3 SAPPIMG.zip and I still get this error.
YOU ARE STILL MAKING THE GOLDCARD THE WRONG WAY...
You should not get that error msg...
Try to remake the goldcard.
Did it on two different SD cards, the same way I did it before to get my phone off perfected SPL... not sure what I could've done to do it wrong this time around.....
a mmc CID can't change right?
followed this guide:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!
htchd2sg said:
The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!
Click to expand...
Click to collapse
Many of this was answered, search the forum.
Here is the thing you have wrong spl radio combination,you have perfected spl. You can do a fastboot boot xxxxxx.img and enter recovery. Then you must flash eng spl 1.33.2010.And you will be unbricked
Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.
htchd2sg said:
Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.
Click to expand...
Click to collapse
You cant boot that recovery try the one hero recovery Ra-magic1.6.2H smthing recovery
I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)
htchd2sg said:
I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)
Click to expand...
Click to collapse
Hmm did you try the sappimg.nbh to restore your magic???
Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!
Can anyone help on this? really get frustrated
htchd2sg said:
Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!
Click to expand...
Click to collapse
You need to create a goldcard www.theunlockr.com at How to's and then use sappimg.nbh
I got gold card already. . Thank you!
Do you solve this? I got the exactly problem with you =(
I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App
r3v4N said:
I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
What a bad news =( I had sent this phone to repair, but all of their experts cannot fix as well.
That's lame.... did you try the unroot process?
Sent from my SGH-T959 using XDA App
You could try unbricking by flashing the Rogers or Brazilian Android 2.1 RUU. The main version is newer and a goldcard should make it work.
Please make sure your battery is full and that you have a PROPER GOLDCARD!!! Otherwise this will most likely fail.
I've uploaded the sappimg to http://www.multiupload.com/WO0S35S53S
Rename it to sappimg.zip, copy it to the root of your SD card and boot into fastboot (vol-down and power). That SHOULD fix your phone. Then again, it could also brick it even worse, but what do you have left to lose?
After loaded sappimg, it checking sappimg, then went back to HBOOT. Nothing happened. I've tried to recreate my gold card, no luck with it =(
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
This is wht My Fender LE edition says in fastboot mode. I can not load into receovery or update using sappimg.zip. It always says Model id incorrect! I have a gold card but its not working at all now.
Everytime i start the phone up its gets stuck at the "HTC MAGIC" logo!!!
Anyhelp??
Matteo8810 said:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
This is wht My Fender LE edition says in fastboot mode. I can not load into receovery or update using sappimg.zip. It always says Model id incorrect! I have a gold card but its not working at all now.
Everytime i start the phone up its gets stuck at the "HTC MAGIC" logo!!!
Anyhelp??
Click to expand...
Click to collapse
Your radio doesn't look right. Did you flash a radio?
C0dy said:
Your radio doesn't look right. Did you flash a radio?
Click to expand...
Click to collapse
yes,, it was from a post in this section but i can no longer find it
Matteo8810 said:
yes,, it was from a post in this section but i can no longer find it
Click to expand...
Click to collapse
Well, the thing is, the only radio that is compatible with the Fender/1.2 is the stock raido. At this point, it's a brick. Put the phone is fastboot mode, download the Android SDK, go cmd (if you're running Windows, and assuming you installed it to the root of the C drive) and then type:
cd\
cd AndroidSDK\tools
fastboot devices
If you get a 'waiting for device', it's done for. Now, if you do get it to show up, download the original radio, SPL, and a custom recovery, put them in the AndroidSDK/tools folder, and flash them with the following commands:
fastboot flash radio radio.img
fastboot flash hboot hboot.nb0
fastboot flash recovery recovery.img
fastboot reboot bootloader
If you need help, free free to PM me.
C0dy said:
Well, the thing is, the only radio that is compatible with the Fender/1.2 is the stock raido. At this point, it's a brick. Put the phone is fastboot mode, download the Android SDK, go cmd (if you're running Windows, and assuming you installed it to the root of the C drive) and then type:
cd\
cd AndroidSDK\tools
fastboot devices
If you get a 'waiting for device', it's done for. Now, if you do get it to show up, download the original radio, SPL, and a custom recovery, put them in the AndroidSDK/tools folder, and flash them with the following commands:
fastboot flash radio radio.img
fastboot flash hboot hboot.nb0
fastboot flash recovery recovery.img
fastboot reboot bootloader
If you need help, free free to PM me.
Click to expand...
Click to collapse
Fastboot devices "HT011PB041145"
But everything else says (remote: notallow)
Fastboot commands aren't going to work unless you can get an engineering SPL loaded up with S-OFF (Security Off). Try making your goldcard again and re-rooting using the guide in my signature.
This is in the wrong forum. It should have been posted in General not Development.
DonJuan692006 said:
Fastboot commands aren't going to work unless you can get an engineering SPL loaded up with S-OFF (Security Off). Try making your goldcard again and re-rooting using the guide in my signature.
This is in the wrong forum. It should have been posted in General not Development.
Click to expand...
Click to collapse
goldcard created successfully... its the same one i had from when i first rooted my phone, but now its not working.. all i'm getting is wrong id model
My friend handed me their MyTouch 2.1 to fix and I don't know what to do with this one.
When I gave them the phone it had SPL 1.33.2010 and the old 3.22 radio. They were on Cyanogen 6.
He wanted to put Gingerbread on the phone so he upgraded the radio to 6.35.10.18 however recovery went missing. He could flash different recoveries from fastboot but it wouldn't boot in to recovery. It just hung at the green MyTouch screen.
He tried downgrading the radio thinking that would fix the issue with recovery not working. It didn't. As a last resort he flashed the Saphire.nbh. That restored his radio and hboot to a lower version however there still is no recovery installed on the phone and now there is no access to flash via fastboot.
Info shows:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.006 (SAPP31000)
RADIO-2.22.28.25
May 27 2009, 19:06:41
Any help would be greatly appreciated!
Trav1sty said:
My friend handed me their MyTouch 2.1 to fix and I don't know what to do with this one.
When I gave them the phone it had SPL 1.33.2010 and the old 3.22 radio. They were on Cyanogen 6.
He wanted to put Gingerbread on the phone so he upgraded the radio to 6.35.10.18 however recovery went missing. He could flash different recoveries from fastboot but it wouldn't boot in to recovery. It just hung at the green MyTouch screen.
He tried downgrading the radio thinking that would fix the issue with recovery not working. It didn't. As a last resort he flashed the Saphire.nbh. That restored his radio and hboot to a lower version however there still is no recovery installed on the phone and now there is no access to flash via fastboot.
Info shows:
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.006 (SAPP31000)
RADIO-2.22.28.25
May 27 2009, 19:06:41
Any help would be greatly appreciated!
Click to expand...
Click to collapse
You can access android now? You need to root it again and install recovery after that eng spl and radio 3.22
WoblyGoblin said:
You can access android now? You need to root it again and install recovery after that eng spl and radio 3.22
Click to expand...
Click to collapse
I Can't access the operating system either. it just sits at the green MyTouch screen. The only thing I have access to is Fastboot and hboot.
Trav1sty said:
I Can't access the operating system either. it just sits at the green MyTouch screen. The only thing I have access to is Fastboot and hboot.
Click to expand...
Click to collapse
If you can access fastboot you should be ok.
Download a copy of clockworkmod 2.5.0.7 or amon-ra recovery
Make sure you have android sdk on your computer and a copy of fastboot installed in the tools directory on your computer. Copy the recovery into your tools folder on your computer and rename it recovery.img
Boot the phone into fastboot and connect it to the computer.
Open a terminal on your computer and run "fastboot devices" and make sure it sees the phone, you should get something back like HXXXXXXXX
Then just flash it over.
If I remember correctly the command is
fastboot flash recovery /android-sdk/tools/recovery.img
(that is assuming your android-sdk is in a directory called android-sdk and the recovery.img file is in tools)
fastboot reboot
That will get recover back on the phone. From there with either clockwork or amon_ra you should be able to reflash a rom
cyberstoic said:
If you can access fastboot you should be ok.
Download a copy of clockworkmod 2.5.0.7 or amon-ra recovery
Make sure you have android sdk on your computer and a copy of fastboot installed in the tools directory on your computer. Copy the recovery into your tools folder on your computer and rename it recovery.img
Boot the phone into fastboot and connect it to the computer.
Open a terminal on your computer and run "fastboot devices" and make sure it sees the phone, you should get something back like HXXXXXXXX
Then just flash it over.
If I remember correctly the command is
fastboot flash recovery /android-sdk/tools/recovery.img
(that is assuming your android-sdk is in a directory called android-sdk and the recovery.img file is in tools)
fastboot reboot
That will get recover back on the phone. From there with either clockwork or amon_ra you should be able to reflash a rom
Click to expand...
Click to collapse
Yeah that's not going to work.
@ the OP, since you have a perfected SPL you'll need to create a goldcard and flash an engineering SPL to the phone with it. Then you can do the steps from above. Secondly, since you have the 6.35 radio you'll have to flash Amon Ra's recovery for the Hero, version 1.6.2.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Thanks DonJuan692006. I went hunting for the goldcard I used to originally root his phone. I was able to get the original sappimg.nbh installed on the phone. Fortunately for me it was still on the card.
Info now shows:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
RADIO-2.22.23.02
Oct 21 2009, 22:33:27
Now that the phone is functional I can fix it for him. Thanks for the help everyone.
Looks like the I have no access to the SD Card now in the rom. It says Removed SD Card. I've tried 5 different cards 1GB-16GB and it doesn't see any of them.
Interestingly it says "recovery can't mount /dev/block/mmcblk0" when I try and flash an update.zip from recovery. This it turning out to be very frustrating.
So I have a mytouch 3g 1.2 32A
After upgrading to Clockword Recovery MOD 2.5.0.7 thru rom manager, I tried to upgrade from cyanogen 6.0 to 6.1 after wiping factory wipe only it failed with a status 7.
I've tried flashing the Amon_ra recovery thru fastboot, but it gives me a remote: not allow error.
My fastboot now says that S-ON instead of S-OFF
I had a goldcard.img from the first time I rooted still, but I'm can't flash any new recovery image or a new rom, they all fail, I also can't restore from a backup, it'll start the process and then an error that reads
E:Can't mount /dev/block/mmcblk0 (or /dev/block/mmcblk0p1)
(I/O error)
Can't mount /sdcard/.android_secure!)
So whats my next step guys? I'm phoneless right now. so I'd appreciate all your help!
Flash official ROM from my thread:
http://forum.xda-developers.com/showthread.php?t=659403
Section T-Mobile myTouch 3G 1.2
5[Strogino] said:
Flash official ROM from my thread:
http://forum.xda-developers.com/showthread.php?t=659403
Section T-Mobile myTouch 3G 1.2
Click to expand...
Click to collapse
There are 3 mt3g 1.2 roms there, which one do I use? Thanks for the reply!
NVM, figured out this first issue myself.. Stupid how hard this is to do on a mac.
5[Strogino] said:
Flash official ROM from my thread:
http://forum.xda-developers.com/showthread.php?t=659403
Section T-Mobile myTouch 3G 1.2
Click to expand...
Click to collapse
It keeps telling me that it can't connect to it, error 170
I tried this thru fastboot and hboot as well. still got the same usb connection error 170.
Phreakwenci said:
It keeps telling me that it can't connect to it, error 170
I tried this thru fastboot and hboot as well. still got the same usb connection error 170.
Click to expand...
Click to collapse
ERROR[170]: USB CONNECTION ERROR
The ROM Update Utility cannot connect to your Android phone. Please check that the USB cable is connected properly between the PC and your Android phone.
Check the following:
1. The Android phone is connected to the USB cable.
2. The USB cable is connected to the PC.
Workaround links to drivers / usb-cable and usb-slot / computer OS
Example: http://community.htc.com/na/htc-forums/android/f/17/p/2467/9719.aspx
You need last HTC Sync and Android SDK Tools (with package Google USB Drivers)
Ok, so do I try to flash thru clockwork recovery or fastboot usb?
Phreakwenci said:
Ok, so do I try to flash thru clockwork recovery or fastboot usb?
Click to expand...
Click to collapse
Write SPL-info from fastboot-mode (first 5 rows, any symbol is important)
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Phreakwenci said:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Click to expand...
Click to collapse
Ok. Your SPL is stock and you really have MT3G v1.2
Do you solve problems with USB drivers?
Anyway... You can flash 2.10.531.4 from RUU 4shared
or
get 2.10.513.4 in archive: rapidshare
rename it to SAPPIMG.ZIP
place it to sdcard
turn phone off
turn on by pressing and holding VolumeDown + Power (it will start into hboot-mode and search for sappimg.zip)
5[Strogino] said:
Ok. Your SPL is stock and you really have MT3G v1.2
Do you solve problems with USB drivers?
Anyway... You can flash 2.10.531.4 from RUU 4shared
or
get 2.10.513.4 in archive: rapidshare
rename it to SAPPIMG.ZIP
place it to sdcard
turn phone off
turn on by pressing and holding VolumeDown + Power (it will start into hboot-mode and search for sappimg.zip)
Click to expand...
Click to collapse
Tried flashing as SAPPIMG.ZIP got this error:
Main Version is older!
Update Fail!
What's my next step?
Phreakwenci said:
Tried flashing as SAPPIMG.ZIP got this error:
Main Version is older!
Update Fail!
What's my next step?
Click to expand...
Click to collapse
This error indicates to difference between versions... ROM has 2.10.531.4 version, your phone has - you will know if run:
Code:
fastboot getvar version-main
Try to erase system
Code:
fastboot erase system
and flash again
Can't erase thru fastboot, it still gives me the remote not allow error.. I downloaded the newest r15 of android sdk, and copied the fastboot.exe from r13 to the tools.. what am I missing to fix this?
Damn, it is bad. Your phone is not bricked, but in deadlock.
Can you boot into recovery? Load phone into fastboot-mode and run
fastboot boot recovery.img
Then you can erase system and data partitions and flash custom rom.
Sent from my A7-040 using Tapatalk
5[Strogino] said:
Damn, it is bad. Your phone is not bricked, but in deadlock.
Can you boot into recovery? Load phone into fastboot-mode and run
fastboot boot recovery.img
Then you can erase system and data partitions and flash custom rom.
Sent from my A7-040 using Tapatalk
Click to expand...
Click to collapse
Ok, so I ran get version thru fastboot: it's version 2.53.707.2
when I run the fastboot boot recovery.img I get this
cannot load recovery.img
So how do I get out of deadlock?
also in recovery i have options to format the following:
boot
system
data
cache
sdcard
sd-ext
would any of those help?
Try to erase system. We must avoid check of main version to install official ROM
Then we can root it and restore all customs...