Hi all,
Mind is someone could guide me on how to launch the SPB keyboard that I have installed in my mini ? Its ver 4.2.1 and I just could not use it as my default keyboard and the same old HTC keyboard is still around. . . Do I need to do up the registrys or what?
Hold the keyboard softkey for 3 seconds and a menu will appear. There you can choose the keyboard.
Thanks, reinstalled and things went well.
Related
Hi to all respected members !
im usining htc p3600 (trinity) i load few keyboard such as resco keybpard, pcmkeyboard & messagease ! but i cant able select any of these keyboard only keyboard i able to use is default one which cames with windows need help & guidance plz im new in here ! thanks in Adv.
it may help if you instal additional keyboards in the main memo (not the memory card) and use a program like IMSelector (not sure where to get it from).
keyboard select problem
i did install in main memo but nothing happen ...same problem again ! none of additional keyboard select while they says installation successful & i already reset many times
same problem!
killereyez said:
Hi to all respected members !
im usining htc p3600 (trinity) i load few keyboard such as resco keybpard, pcmkeyboard & messagease ! but i cant able select any of these keyboard only keyboard i able to use is default one which cames with windows need help & guidance plz im new in here ! thanks in Adv.
Click to expand...
Click to collapse
Ive been using SPB Full Screen Keyboard. It works like a dream, both portrait and lanscape mode (landscape better ) Fully customised keyboards to download for FREE I would fully recommend this!!! Best of all, when installing it gives you the option to 'map' a button to activate the keyboard
Google it, try it, buy it
EDIT-oh, I forgot to mention, being a full screen keyboard it makes it difficult to see what your typing but you can scroll left and right. If you map a buttton, it takes a second to start-up and close down with a push of the button!!!!
Have a look at this link Using alternate keyboards, i had a similar problem and installing the G4 SIP manager solved the problems.
Here's a weird one... I have a rogers TyTN (it did this on WM 5 as well as 6)
The Y, U, and I keys all have weird results. The arrow keys do the same as the Y, U and I keys.
The Y key does a < key and then the Y and the U and I keys do a down arrow then U or I depending.
How can I get the keyboard layout right again? This is driving me nuts! Ican't text or email right now because it's constantly doing these weird things.
Thanks for any help!
You can try the cabs that setup the keyboard but if this doesnt work it might be a hardware problem, here are the links!
Tytn keyboard cab: http://forum.xda-developers.com/attachment.php?attachmentid=53517&d=1191857943
8525 keyboard cab: http://forum.xda-developers.com/attachment.php?attachmentid=53516&d=1191857943
Edit: im assuming you know how to install a cab but ill go ahead and say how to. Put file onto your hermes and then on the phone go to file explorer and click on the cab you put on your phone.
FTGF
Or HTCustom and Schaps Adv Config have a options in them to change it.
Thanks for the advice. In the advanced config it was set to chinese. I switched it to english, but got the same results.
I've also tried both mappings provided as cab files and no joy :<
Must be the phone... considering it did this with the rogers firmware on it that's the only thing that makes sense... back to rogers!
maybe you have the htc touch keypad + keyboard installed. I had the same problem, deinstalled the touch keypad / keyboard and it worked fine.
Just the thing is, I'd really like to use both, touch keypad and correctly functioning slideout keyboard...
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me
Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?
cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse
Hi all,
I have upgraded my mobile to PDXHL2 and everything works fine (my i780 has Eng and arabic Keyboard).
My problem in the keyboard!!!
I have the mail symbol on the keyboard if I press it; it will show as GPS shortcut (in other country)...anyway next to this botton is "." and "!" botton
if I press it when writing it will open the mail box/sms and I can't find the dot "." botton!!!
in the left of the "0" botton I have "AB" which it should be used to switch between the langauge (It needs for my case Arabic installation)
Sorry for my long message but just want to change the keyboard back like before
Thx
Anyone can help...
in addition....If I install Arabic the keyboard (external) wont work proberly
Try asking your question here or Q&A forum on XDA-dev:
http://www.ppcsg.com/index.php?showtopic=100402
Thx...I'll try
Did you find the solution to the keypad mapping???
Nop...!!!
I'll post now on PPCSG
I couldn't post it there...I'm wondering why?
Maybe I have to write 10 atricles?
Can someone help?
++++++++++++++
Now I post it...it was activation issue
No one reply...!!!
No Answers...it seems I'm the only one having this problem?
Ok can Any one get me keybad or keyboard layouts files so I can replace it in my mobile?
Any Idea?
i'm install the FingerKeyboard 2.1 and this is work, but if i do restart to the device so the keyboard back to the default and i need remove and renstall...
Windows Mobile 6.5 please help me...
ZinGale said:
i'm install the FingerKeyboard 2.1 and this is work, but if i do restart to the device so the keyboard back to the default and i need remove and renstall...
Windows Mobile 6.5 please help me...
Click to expand...
Click to collapse
Not sure if I completely understand your problem, but after a restart your default keyboard goes back to the HTC one? If so you just press the button to the right of the keyboard icon (when in a typing screen) -(Or press and hold the keyboard icon), then choose fingerkeyboard from the list. No need to soft reset lol.
Also try using attached app and once installed open it and set Fingerkeyboard to default, reset and fingerboard should then be your default keyboard