I just installed nand with clockwork. I installed Jaws miui and it wouldn't start. It was stuck on the HTC screen in the beginning. Now i installed JDMs ultimate android, but it won't start either. it stays stuck in the HTC screen.
I used HSPL4 and followed the directions very carefully. My MAGLDR still works fine. Its just the roms that won't start.
Are you installing the required partition for the particular ROM? Sometimes it can take 10-15 minutes to load for the first time.
im formatting my sd card to see if that works.
reflash your cwr m8
like for jaws MIUI rom u need to edit cwr flash before u flash cwr. thats why u was stuck !
AssassinX said:
im formatting my sd card to see if that works.
Click to expand...
Click to collapse
i formatted my sd card and the same thing still happened when i tried to boot up JDMs android. and before i formatted i reinstalled the clockworkmod and it still didn't work.
what do you mean by edit your CWM?
notice display message when installing, isn't complete?
so if u have CWR/CWM - ClockWorkMod Recovery in your PC u can find the file name flash.cfg. So for some roms u need to edit this file before u flash CWR into your phone. If u need or not to edit this file u should find in your roms thread. U can edit it in any text editor. Also u need to check what CWR size u need for you rom cos u can have CWR in many sizes like from 150mb to 400mb
For example this is how CWR flash.cfg original file looks like
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 400M
cache ya 4M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
And here is modified 1 what is required for rom what I using
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 8M
system ya 140M
cache ya 30M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
So u can see its different.
Hope this info helps u m8
AssassinX said:
i formatted my sd card and the same thing still happened when i tried to boot up JDMs android. and before i formatted i reinstalled the clockworkmod and it still didn't work.
what do you mean by edit your CWM?
Click to expand...
Click to collapse
Did you partion your SD card?
Sent from my HTC HD2 using XDA App
rabbit35 said:
notice display message when installing, isn't complete?
Click to expand...
Click to collapse
no, when i install the rom on CWM it always says install complete.
rikardo1979 said:
so if u have CWR/CWM - ClockWorkMod Recovery in your PC u can find the file name flash.cfg. So for some roms u need to edit this file before u flash CWR into your phone. If u need or not to edit this file u should find in your roms thread. U can edit it in any text editor. Also u need to check what CWR size u need for you rom cos u can have CWR in many sizes like from 150mb to 400mb
For example this is how CWR flash.cfg original file looks like
And here is modified 1 what is required for rom what I using
So u can see its different.
Hope this info helps u m8
Click to expand...
Click to collapse
thanks but i got the link off of jayceooi.com. it didn't say if i had to edit the CWM or not. And in the tutorial videos i didn't see the guy edit his clockwork. I was trying to install JDMs ultimate android so i don't know if that needed a edit.
LosKoe said:
Did you partion your SD card?
i formatted it if thats what you mean. I'm kind of new to all this modding so i'm not familiar with that term.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
AssassinX said:
no, when i install the rom on CWM it always says install complete.
thanks but i got the link off of jayceooi.com. it didn't say if i had to edit the CWM or not. And in the tutorial videos i didn't see the guy edit his clockwork. I was trying to install JDMs ultimate android so i don't know if that needed a edit.
Click to expand...
Click to collapse
So u got d link off Jayceooi.com...You should visit the dev's thread & follow d recommended instructions as some installation methods might have been changed (since d post on d website was made) just as d above posters suggested.
AssassinX said:
i formatted my sd card and the same thing still happened when i tried to boot up JDMs android. and before i formatted i reinstalled the clockworkmod and it still didn't work.
what do you mean by edit your CWM?
Click to expand...
Click to collapse
Make sure you have the right CWM size for the rom you are using, and format your sdcard properly.
Do you have the correct partition?
Related
hey guys i have a HTC HD2 i already added the new radio
an installed magdlr ( i think thats the name) so far, i havnt had any luck flashin any roms...they flash, but never boot
i have this one flashed atm moment HyperDroidGBX-v12
but as i just started i cant post in that thread
sorry, i used the search bar, so dont eat me alive plz
i get to the blue android, but it just hangs, reboots, an does it again
help me out, what am i doin wrong
I have installed everything but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android
^ kinda like this
but im usin a regualr battery
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
rauschkugl said:
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Click to expand...
Click to collapse
yea i installed it, but im not sure if i did the partion size thingy?
maybe, but just in case i didnt, how do i do that step by step?
also do i have to fromat my sd card for this to work, its already fat 32
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
ill try that after soem one explain the pastion thing to me
although i think i did,i went to clockwork an set it to 1024
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
i set it to 1024,an 0 for the swap
an did everything in your post
still restarting, gettin worried
what do i now?
bumping
in the hopes of being helped just teeny bit quicker
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
mutil said:
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
Click to expand...
Click to collapse
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
SubZeroMaster said:
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
Click to expand...
Click to collapse
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
mutil said:
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
Click to expand...
Click to collapse
i used the program...fine
i wiped..fine
i flashed rom...fine
restarted fine...
didnt boot in to android???
whats goin on?
also thanks for the help so far, but dont abadon me yet plz
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Marvlesz said:
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Click to expand...
Click to collapse
followed this to the TEETH
an loopin......
ARRGGH plz guys dont forsake me just yet
also thx for every
bumptastic
142 people have viewed this thread
but only 4 or so people helped!
come on guys!!
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
SubZeroMaster said:
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Click to expand...
Click to collapse
man which rom you want to use? you had said hyperdoid and now you talk about 250mb nand which has nothing to do with hyperdroid!?
Marvlesz said:
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
Click to expand...
Click to collapse
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
an thanks for everyone helpin get this far
SubZeroMaster said:
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
Click to expand...
Click to collapse
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Marvlesz said:
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Click to expand...
Click to collapse
saw it in in some guys signature (250 nand ) although i dont knwo if that relates to me
no, i cant put the recorvery stuff on my sd becuase, windows is saying i have to format first (then is says it cant)
is was fine yesterday, maybe all this "stuff" i may/may not have done something
anyway how i can fromat so i can proceed?
Hi,
First of all I am sorry for the noob question, but how can I verify what is the partition size of Clockworkmod Recovery is creating in my cell phone?
I have a T-Mobile HD2 with MAGL 1.3, Clockworkmod Recovery 3.0.0.1 and Hyperdroid CM7 installed. Under Settings/About Phone/ Mem Info I see 134MB/411MB. Is the CWM partition related with this?
In the past I used the HD Core Droid version 1.5 witch was a very big Android ROM (270Mbytes), now a installed the Hyperdroid witch is very light (67Mbytes). But I just installed the ROM without changes in the CWM layout. Any suggestions about?
Thanks
Eduardo
magoo1275 said:
Hi,
First of all I am sorry for the noob question, but how can I verify what is the partition size of Clockworkmod Recovery is creating in my cell phone?
I have a T-Mobile HD2 with MAGL 1.3, Clockworkmod Recovery 3.0.0.1 and Hyperdroid CM7 installed. Under Settings/About Phone/ Mem Info I see 134MB/411MB. Is the CWM partition related with this?
In the past I used the HD Core Droid version 1.5 witch was a very big Android ROM (270Mbytes), now a installed the Hyperdroid witch is very light (67Mbytes). But I just installed the ROM without changes in the CWM layout. Any suggestions about?
Thanks
Eduardo
Click to expand...
Click to collapse
looks like your partition is set for around 400mb
you can modify the flash.cfg file in cwm by opening it with notepad.
and change the numbers to those recomended by the Rom dev
misc ya 1M
recovery rrecov|ro|nospr filesize MAGLDR_recovery_3.0.2.4-seadersn.img
boot yboot|ro 8M
system ya 400M
cache ya 8M
userdata ya|asize|hr allsize
Thanks for your help. Just a few question.
Where is located the flash.cfg file? So, just changing the parameter system ya from 400M to 150M is enought to release space to install more apllications?
Thanks
Eduardo
magoo1275 said:
Thanks for your help. Just a few question.
Where is located the flash.cfg file? So, just changing the parameter system ya from 400M to 150M is enought to release space to install more apllications?
Thanks
Eduardo
Click to expand...
Click to collapse
u will need to instal everything again and use the toolkit to install the 150 mb partition ... witch will leave about 200mb free ...if u install 120 mb that will leace about 300 mb free ... if u go lower mayve the rom wont boot.
for hyperdroid i used ti flash 100 mb but with 90mb the rom dont boot ...it's advisable to flash the partition set by the dev of any rom...
magoo1275 said:
Under Settings/About Phone/ Mem Info I see 134MB/411MB. Is the CWM partition related with this?
Click to expand...
Click to collapse
no, it isnt related at all, thats the memory, the RAM, not the partition size.
there is nowhere as standard that shows you teh size of the system partition (which is what you mean by CWM partition).
You can see the size of the data partition by going setings - storage - internal storage.
to see teh others, get 'super manager' from teh market, open it, and choose file explorer.
now, at teh top of the foldes list, in small writing under where it says 'back up level folder' it gives you details of teh folder you are currently in, ,
so use it to browse into your system folder, and look at the info.
EG mine says 'total 150M used 137.4M, bla blah' because I have a 150Meg system partition, and teh typhoon rom comes to about 137 meg when unzipped.
If i now browse into the cache folder, that info shows 'tot 40M, used 1.1M.....' because i chose a 40meg cache partition.
you can do the same with the sd-ext folder to see how big and how full your EXT partition on the sd card is.
Thanks a lot for all the answers. Now the this thing is getting clear for me.
Thanks guys.
how come none of the ICS 4.0 works but all 2.3 works? did it flash the wrong MAGDLR and HSPL or something? all 2.3 takes 3 minutes to boot. but all ICS are passing 1 hour and it's still not booting 4.0
what size of system partition u using ?
_JaSoN_ said:
what size of system partition u using ?
Click to expand...
Click to collapse
not sure what you mean. maybe that's the problem
http://forum.xda-developers.com/showthread.php?t=1434860
check there
Installations:
Please use at least 165MB system partition and at least 2MB cache partition.
sigh... this is disheartening...
i don't get it. i go to 8. AD RECOVERY and partition SD to at least 200mb and least 2mb and still just loads and loads and loads on the colorful boot screen.
No, you don't partition your SD, you flash a new CWM partition layout. Download CWM, change the flash.cfg to whatever size is necessary then enter USB flasher mode on the phone and flash from the PC. On your SD card a 1gb EXT partiton is recommended which is probably what you had before changing it.
Nigeldg said:
No, you don't partition your SD, you flash a new CWM partition layout. Download CWM, change the flash.cfg to whatever size is necessary then enter USB flasher mode on the phone and flash from the PC. On your SD card a 1gb EXT partiton is recommended which is probably what you had before changing it.
Click to expand...
Click to collapse
yeah... no idea what you're talking about.
upsidedownbanana said:
yeah... no idea what you're talking about.
Click to expand...
Click to collapse
Well then go do some research and don't bother flashing any phones in the future if you can't figure it out after that
Nigeldg said:
Well then go do some research and don't bother flashing any phones in the future if you can't figure it out after that
Click to expand...
Click to collapse
This thread made my day xP
Sent from my HTC HD2 using Tapatalk
your system partition is not big enough...220is needed
got it working. had to download the NAND tool by searching google. because none of the links on this forum works. that's what i really needed. everything else was silk
upsidedownbanana said:
got it working. had to download the NAND tool by searching google. because none of the links on this forum works. that's what i really needed. everything else was silk
Click to expand...
Click to collapse
*slow sarcastic clapping* Well done, you used Google. Next time, do this before posting unnecessary threads
ah come on be easy on the noob! as great as this whole thread is, just remember there was SOME point you had to ask some question for the millionth only to answer it yourself.
but seriously ... try google first!
Hi guys little help pleaseeeee over hereeee......
i installed win 7 after android ....dont like it...my sd was locked... i unlocked with nokia after 2 weeks !!! now im tryingggg to put android again and i CANTTTT !!!! i cantttttt im going to jump from the building i dont now what to doooooooooo ... i trying to install tbd rom and im getting the messeage (status 0) installation aborted !
a guide please...im comfused.... i dont now what to flash first ... i have flash hspl after mag after recovery...... what recovery is the right one? 150 ? 250? 400 ? anyway then in recovery go to wipe data factory then wipe cache partition then wipe dalvik cache then partition sd card 1024m and then copy the zip rom in sd and install it with recovery
win7???tell me how u did it....
wp7???
format your sdcard with the sdcard reader---download a rom copy to sd--
flash maglrd1.1.3---flash recovery5---flash rom---reboot----wait for a while---done..
you can see the correct size of Recovery in the description of the ROM which you want to install
Sent from my HTC HD2 using XDA
110718 said:
Hi guys little help pleaseeeee over hereeee......
i installed win 7 after android ....dont like it...my sd was locked... i unlocked with nokia after 2 weeks !!! now im tryingggg to put android again and i CANTTTT !!!! i cantttttt im going to jump from the building i dont now what to doooooooooo ... i trying to install tbd rom and im getting the messeage (status 0) installation aborted !
a guide please...im comfused.... i dont now what to flash first ... i have flash hspl after mag after recovery...... what recovery is the right one? 150 ? 250? 400 ? anyway then in recovery go to wipe data factory then wipe cache partition then wipe dalvik cache then partition sd card 1024m and then copy the zip rom in sd and install it with recovery
Click to expand...
Click to collapse
Half of your post is indecipherable, please learn how to spell! Using multiple letters won't help you in any way.
As for your question, the correct partition sizes will be stated in your ROM of choice. Just use the HD2 NAND toolkit to make everything easier.
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
I would suggest the newer radio...
Sent from my HTC Sensation XL with Beats Audio X315e using xda premium
gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
Yes, this, except skip steps 1 to 4 and only flash a new recovery
As I said, use the HD2 NAND toolkit to repartition, it makes things much easier. If you want to you can also download the suggested Recovery_150M_system_5M_cache then change the file inside that folder called Flash.cfg to the required size
saroni said:
win7???tell me how u did it....
wp7???
format your sdcard with the sdcard reader---download a rom copy to sd--
flash maglrd1.1.3---flash recovery5---flash rom---reboot----wait for a while---done..
Click to expand...
Click to collapse
I dont remember how i did it with windows mobile 7...in mag i did something with the 24 last nand i think after i flash a rom ithink...
wait ....
1. flash mag (in bootloader run the rom update utility exe) right?
2. flash recovery (cant find in rom what recovery to install i look a lot of times ) this is the rom : http://forum.xda-developers.com/showthread.php?t=1275119 can you find it PLEASEEEEE ????
3. copy rom in sd and run it from recovery in (run zip file from sd ) right?
This is the steps?????????
kali926 said:
you can see the correct size of Recovery in the description of the ROM which you want to install
Sent from my HTC HD2 using XDA
Click to expand...
Click to collapse
i cant find it please can you look? http://forum.xda-developers.com/showthread.php?t=1275119
Nigeldg said:
Half of your post is indecipherable, please learn how to spell! Using multiple letters won't help you in any way.
As for your question, the correct partition sizes will be stated in your ROM of choice. Just use the HD2 NAND toolkit to make everything easier.
Click to expand...
Click to collapse
Sorry not very good with english....nand toolkit? hmmm.. ok i look for that... thanks...
gsmxgsm said:
u need
1-HSPL4.exe
2-Radio 2.08.50.05 + task29
3-MAGLDR113_DAF
4-Recovery_150M_system_5M_cache[v3.0.2.5]
and custom rom fond here http://android.hd2roms.com/
Click to expand...
Click to collapse
i have HSPL3_PKG its not good?
radio i think i have 2.08 yes
mag 113 ok
and recov 150 ok...
and what is the steps..what to flash first?????
Nigeldg said:
Yes, this, except skip steps 1 to 4 and only flash a new recovery
As I said, use the HD2 NAND toolkit to repartition, it makes things much easier. If you want to you can also download the suggested Recovery_150M_system_5M_cache then change the file inside that folder called Flash.cfg to the required size
Click to expand...
Click to collapse
Ok so..i will flash the 150 recovery only? if i want to do it fresh? from the start how i will do it?
110718 said:
i have HSPL3_PKG its not good?
radio i think i have 2.08 yes
mag 113 ok
and recov 150 ok...
and what is the steps..what to flash first?????
Click to expand...
Click to collapse
All you need to do is flash a new recovery. This post says it's 172mb. Task29 and stuff really won't help you uness you are experiencing major problems.
Nigeldg said:
All you need to do is flash a new recovery. This post says it's 172mb. Task29 and stuff really won't help you uness you are experiencing major problems.
Click to expand...
Click to collapse
My hd2 is now with the unfinished rom install ..its in the error ...should i format something? no? only recovery? ok exist recovery 172 mb? i have 150m 250m and 400mb ...please helpp..... i dont understand....
Dont need to ext partition the sd??? i have eu model ! i dont undestand
110718 said:
Dont need to ext partition the sd??? i have eu model ! i dont undestand
Click to expand...
Click to collapse
Yes you need to create an SD EXT partition, but this can easily be done in CWM. To flash a 172 MB partition, download any recovery size then open the file flash.cfg (not flash.cfg.txt) with notepad, then change the system partition size to 172 MB and leave everything else the same
Nigeldg said:
Yes you need to create an SD EXT partition, but this can easily be done in CWM. To flash a 172 MB partition, download any recovery size then open the file flash.cfg (not flash.cfg.txt) with notepad, then change the system partition size to 172 MB and leave everything else the same
Click to expand...
Click to collapse
I Install the right recovery and THE PHONE WORK !!!! YEAAA I DID IT!!!! but without the steps you are saying ..I didn't do any partition ! Now? My phone don't work properly ??? My Rom is tbd 3.6 the last..
110718 said:
I Install the right recovery and THE PHONE WORK !!!! YEAAA I DID IT!!!! but without the steps you are saying ..I didn't do any partition ! Now? My phone don't work properly ??? My Rom is tbd 3.6 the last..
Click to expand...
Click to collapse
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Kameirus said:
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Click to expand...
Click to collapse
Massive +1 to this, if you can't be bothered to read don't bother flashing anything. Seriously.
Kameirus said:
well if your using the TBD 3.6 on an eu phone you will need an sd ext of at least 1gig
if your unwilling to read the rom thread then maybe you shouldnt be trying to flash your phone
Click to expand...
Click to collapse
No its not that ! im new to this and i dont now good english my phone was locked from win 7 1 month and i was trying trying trying by my self to fix it ! yesterday i run again for the first time android again.. with a lot of reading and time ! and im not expert on mobile ... all this seems to me very difficult ! i try to set up a partition with the other recovery i have but i was getting always error now i install the proper recovery from the tbd post.. (TBD_4EXT_New_7_172_7)
and the phone works but i dont understand how to do partition and i dont now if i have done partition and i dont now it...my card when i connect it to pc is 13gb but my sd card is 16 gb !! where is the other 3gb ??? is there a partision? how can i see if i have it in my hd2 ?????
Hi, I dont know, where fail me, please can you help me? Sorry if I write in bad section.
I want install this ROM to HTC HD2: http://forum.xda-developers.com/showthread.php?t=1348922 I found step by step guide, and stuck at at instal magldr 1.13 recovery, I solved that, and next step was instal CLK 1.5. ok, after reboot I get to android recovery menu. I copy ROM to root SDcard a over recovery menu installed , by instal asked me at wipe (I gave wipe) next ask was version EU vs US t-mobile verzi (EU option get error. US-tmobile get install ROM) last ask was magldr or CLK installed, I installed at last CLK so choiced CLK.. on LCD I saw install complete, you may reboot, and may take 15 minutes. I saw HTC logo, but after 35 minutes in stuck htc logo, I powered off and find help. can you help me, where I failed? THX and sorry for my bad english
Follow the guide in my signature, either you followed a very bad guide or (more likely) you misunderstood a lot of it because of the language barrier. This is an outline of the steps you should be taking:
1. Install HSPL
2. Install a compatible radio
3. Install MAGLDR
4. Install CWM with the correct system partition size for your chosen ROM
5. Partition your SD card for A2SD (optional)
6. Install the ROM
7. Install any extra features you want.
Good luck
Nigeldg said:
...
4. Install CWM with the correct system partition size for your chosen ROM
5. Partition your SD card for A2SD (optional)
...
Click to expand...
Click to collapse
THX for reply. I think error is in 4 and 5 steps. I found this informations "system size 5/145/5 MB". Mean it I must edit flash.cfg in MAGLDR_CWR_5.0.2.6? at
misc ya 1M
recovery rrecov|ro|nospr 5M recovery_leo.img
boot yboot|ro 5M
system ya 145M
cache ya 5M
userdata ya|asize|hr allsize
??
HOLAS13 said:
THX for reply. I think error is in 4 and 5 steps. I found this informations "system size 5/145/5 MB". Mean it I must edit flash.cfg in MAGLDR_CWR_5.0.2.6? at
misc ya 1M
recovery rrecov|ro|nospr 5M recovery_leo.img
boot yboot|ro 5M
system ya 145M
cache ya 5M
userdata ya|asize|hr allsize
??
Click to expand...
Click to collapse
That is correct, yes, however you must also partition your SD card if you have an EU HD2 as some apps will be installed to the EXT partition of the SD. You can either do this on a PC or in CWM (see the guide in my signature for this).
Nigeldg said:
... if you have an EU HD2 ...
Click to expand...
Click to collapse
How can I check if I have EU or TMOUS (this is not my phone, so I dont know it)? I am installing TMOUS, because EU install get error. and must I EXT partition creat in SD with TMOUSE? big thanks
A TMOUS HD2 will have the T-Mobile logo on the top of the phone, a red end call button and a green call button. I think that you may still need to create an EXT partition for the TMOUS one as well, now that I've had a look at the ROM.
I changed touch screen, so mabye only check button ok I think I have EU version, so I need EXT part? can you any PC tools recommend me? I think by CWM not work :/ or its possible it take format 8gb card 1 hour? I see only partitioning SD card... please wait... but really I see it 1 hour :/
HOLAS13 said:
I changed touch screen, so mabye only check button ok I think I have EU version, so I need EXT part? can you any PC tools recommend me? I think by CWM not work :/ or its possible it take format 8gb card 1 hour? I see only partitioning SD card... please wait... but really I see it 1 hour :/
Click to expand...
Click to collapse
Yeah, it shouldn't take an hour so it's clearly not working properly in CWM. I'd recommend using EaseUS Partition Manager, it's fairly user friendly. I don't know about the language settings though, hopefully it'll work for you.
I must be idiot :/ still nothing I formated SD card with primary partition FAT32 capacity 6,5 GB and 1 logical partition EXT (I tried EXT2 and EXT3), but If I try install EU version, by step "mount sd-ext" get error E:error name_rom.zip (status 0) isntall aborted. Any ideas? THX
OK, I choosed another ROM and it work BIG THANK TO Nigeldg