Hey,
Booting from a TyphooN CyanogenMod 7 RC2+ v2.5.0 with a rafpigna OC 1.8 kernel with a clockwork recovery of 135mb
and I want to UPDATE TyphooN CyanogenMod 7 RC2+ v2.8.0 tytung r8 kernel without a clean install.
My steps were:
1. Flash Clockwork recovery with 200mb through DAF.exe and USB Flasher thru bootloader (necessary for TyphooN CyanogenMod 7 RC2)
2. Back up my settings with CWR.
3. Wipe Cache
4. Wipe Dalvik
5. Install from ZIP from SD card and choose TyphooN CyanogenMod 7 RC2 zip.
6. update finishes
7. reboot system
8. Nand Kernel update fail
I used several downloads from the ROM, tried with usb cable and with usb card
Can somebody tell me what I'm doing wrong?
- Is it because I'm trying to update with a different kernel => If so, how can I change my kernel, searched for it but couldn't find it.
Anyway thanks, I'm still learning here
Hartendief said:
Hey,
Booting from a TyphooN CyanogenMod 7 RC2+ v2.5.0 with a rafpigna OC 1.8 kernel with a clockwork recovery of 135mb
and I want to UPDATE TyphooN CyanogenMod 7 RC2+ v2.8.0 tytung r8 kernel without a clean install.
My steps were:
1. Flash Clockwork recovery with 200mb through DAF.exe and USB Flasher thru bootloader (necessary for TyphooN CyanogenMod 7 RC2)
2. Back up my settings with CWR.
3. Wipe Cache
4. Wipe Dalvik
5. Install from ZIP from SD card and choose TyphooN CyanogenMod 7 RC2 zip.
6. update finishes
7. reboot system
8. Nand Kernel update fail
I used several downloads from the ROM, tried with usb cable and with usb card
Can somebody tell me what I'm doing wrong?
- Is it because I'm trying to update with a different kernel => If so, how can I change my kernel, searched for it but couldn't find it.
Anyway thanks, I'm still learning here
Click to expand...
Click to collapse
Save all the files from you SD to your computer, then format the SD card. Try formatting your SD Card first. Your CWM backups will be on your SD Card.
If that alone dont work do:
REMOVE SD CARD
1. Task 29
2. Install MAGLDR 1.13
3. Flash your 200mb partition
PUT SD BACK IN PHONE
4. Install your zip build
When you are done run through setup reboot into CWM and advanced restore data only.
Related
Right now i have android 2.2 sense on my HTC HD2. I have flashed a few ROMS and are starting to get the hang of things but all the ROMS i have flashed have had a DAF.exe or a Installer.exe file in them that i use to install the ROM. Now i want to install MDJ's CyanogenMod 7 v. 2.6 (http://forum.xda-developers.com/showthread.php?t=877777) but can't understand how to do it because it only has three folders in the Zip, Boot, System and META-INF. HELP PLEASE??
You must not unzip this rom, it gets installed using ClockWork Mod (CWM) and is installed as a zip rom from the sd card. You will need magldr 1.13, you then need to flash a cwm 1.3 partition (150mb) should do. You then enter ClockWork Recovery and install the rom. You'll find info on CWM here
Hi
I'm already install the Nexus android Nand on my HD2 T-Mobile using te special version of CWM 3.0.0.3
Now I need to try the Hyberdoid GBX, should I remove the 3.0.0.3 (and how??) to use the 150M version (V 1.3 I think) or I can use the CMW 3.0.0.3 to install the HyberdroidGBX
Thanks any way guys, U inspired me a lot
Call me stupid, but if it was me i'd:
1: Ask in the actual thread of the build
2: Follow the instructions how to install that build, written by the developer
or am i just stupid??
anyways.......step by step....just follow what dev has recomended.
Dunno bout you, but if an expert like the Dev has put a build together and he recomends..."install this"....."flash that" etc etc etc...then prob in best interests to do how he explains and install what he says is needed.
1. HyperDroid Installation
==========================
You should have at least MAGLDR 1.13 on device.
You should also have Clockworkmod (CWM) Recovery v1.3 by RaiderX303 installed.
Short version:
Install ROM from zip using CWM (Full Wipe Recommended if coming from another ROM)
Step by step version:
1. Boot into MAGLDR (Power On and HOLD the Power Button till MAGLDR options are shown)
2. Boot into AD SD or AD Recovery to enter CWM Recovery Mode
3. If coming from another ROM, do a Nandroid Backup (just to be sure)
4. Wipe data
5. Wipe cache
6. Wipe Dalvik Cache
7. Go to mounts and storage and mount sdcard
8. Copy the ZIP you downloaded to your sdcard and unmount
9. Select install zip from sdcard
10. Find the HyperDroidGingerbread.zip and install
11. Reboot and remove Phone from USB
12. After initial setup, reboot to get everything settled
13. Enjoy the Clean, Fast, Minimalist Gingerbread HyperDroid Goodness!
i can't install MAGLDR113_DAF.. any1 help pls??
closemyeyes said:
i can't install MAGLDR113_DAF.. any1 help pls??
Click to expand...
Click to collapse
dont use that, from bootloader screen (tricolor) use the ROMUpdateUtility.exe.
matthew33 said:
Call me stupid, but if it was me i'd:
1: Ask in the actual thread of the build
Click to expand...
Click to collapse
ur not of course
I cant ask in the actual thread of the build because I'm new member (less than 10 posts) and the nand development section restricted for me
this is the link of the build I already installed (I'm not even able to quote)
u notice that he said under installation :
Installations
===========
You should have at least MAGLDR 1.13 on device.
CWM (ClockworkMod) Recovery Version via SD card (Flash update.zip)
Installing the CWM_Recovery_for_NexusHD2 (135MB system and 2MB cache) to create a space-efficient NAND partition layout (via flash.cfg) designed specifically for NexusHD2 series is highly recommended if coming from another ROM.
now I'm going to install This Build
I'm asking if there is a problem if I use the same version of CWM or NOT
Thanks for help
Today I downloaded the Nexus HD2-Gingerbread V2.8 and moved it to my SD card, I then went in to MANGDLR and to AD Recovery>Install Zip From SD Card>Choose ZIP From SD then selected the zip file. Everything loaded fine but when I restarted it sat on the green "HTC" screen for over 30min so I decided to wipe everything by reinstalling stock WinMo 6.5 then started from scratch with re-installing MANGDLR and ClockWorkMod then tried again and got the same result. Any Ideas?
sh1fty7 said:
Today I downloaded the Nexus HD2-Gingerbread V2.8 and moved it to my SD card, I then went in to MANGDLR and to AD Recovery>Install Zip From SD Card>Choose ZIP From SD then selected the zip file. Everything loaded fine but when I restarted it sat on the green "HTC" screen for over 30min so I decided to wipe everything by reinstalling stock WinMo 6.5 then started from scratch with re-installing MANGDLR and ClockWorkMod then tried again and got the same result. Any Ideas?
Click to expand...
Click to collapse
Hi,
What HSPL did you use?
What radio did you use?
What size CWM partition did you use?
malybru said:
Hi,
What HSPL did you use?
What radio did you use?
What size CWM partition did you use?
Click to expand...
Click to collapse
Yes, it's really important what CWM partition you use. You should post those info's when asking, which makes it easier to answer your question
sh1fty7 said:
Today I downloaded the Nexus HD2-Gingerbread V2.8 and moved it to my SD card, I then went in to MANGDLR and to AD Recovery>Install Zip From SD Card>Choose ZIP From SD then selected the zip file. Everything loaded fine but when I restarted it sat on the green "HTC" screen for over 30min so I decided to wipe everything by reinstalling stock WinMo 6.5 then started from scratch with re-installing MANGDLR and ClockWorkMod then tried again and got the same result. Any Ideas?
Click to expand...
Click to collapse
a) Do task29
b) Install MAGLDR
c) Install correct CWM partition
d) properly format your sd card (sdformatter full>overwrite with size adjustment)
e) partition card with CWM (if needed)
f) copy rom zip over and flash.
Sorry
What I meant to say is I was upgrading from V2.7 to V2.8. I ended up re-flashing V2.7 then rebooting back into MANGDLR and then flashing V2.8 and it worked. Trial and error I guess. What do you guys think it could have been?
Market Place Download Issue
Is anyone else having issues downloading from the marketplace? I am able to go online and send something to my phone and it will install but if I go through the marketplace on my device I get an error message "Download was unsuccessful, please try again" when downloading or updating an app. Help please.
Device: HTC HD2
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
Bootloader: cLK 1.4.0.1
Recovery: ClockworkMod Recovery 3.2.0.0
Android ROM: NexusHD2-Froyo V1.9G NAND (Android 2.2.2) | Kernel: tytung_r10_oldcam
Android ROM: NexusHD2-Gingerbread V2.8 NAND (Android 2.3.4) | Kernel: tytung_r10
Unable to download from the market.
Okay so after researching this issue online and seeing that the common fix is reformatting the SD card and partitioning I recalled an article about Windows Phone 7 locking up SD cards so that they were unusable to any other device. They were taking advantage of what Secure Digital was designed for. People were trying to reformat cards using computers running Windows and Linux and other devices but nothing worked. Eventually someone remembered that Nokia still gives their devices full SD permissions and formatting the SD card with a Nokia device fixed the SD card and allowed it to be used in another device. I decided that if it could do that maybe my Nokia N8 could solve my SD issues too. So instead of going through the lengthy processes I was seeing online I popped the SD card into my N8 and formatted, it worked like a charm. So although Nokia has disappointed me time and time again they do some things right, thank you Nokia.
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN CyanogenMod 7 .zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN CyanogenMod 7 .zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
Hi,
It seems that you have done everything correctly.
Did you transfer the ROM to your card by cable or card reader?
Try putting the ROM on to your card by card reader,and re-installing the ROM.
malybru said:
Hi,
It seems that you have done everything correctly.
Did you transfer the ROM to your card by cable or card reader?
Try putting the ROM on to your card by card reader,and re-installing the ROM.
Click to expand...
Click to collapse
Hi, thx for replying. I tried to transfer the zip file by the magldr mass storage but it keeps hanging. I had to flash to the stock rom to transfer the zip file. i re-installed 3 times and finally gave up.
After installing the MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5), i used the boot android from sd and it could not locate the initrd and zimage. after putting those file into the card, i was able install it. But failed to load the kernel thingy.
Thanks
Wrong thread.
hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN CyanogenMod 7 .zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
I would recommend searching the forum for a thread specifically for [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], seeing as this thread is specifically for [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10]. You might want to try the NexusHD2-Gingerbread V2.8 ROM it is flawless . Here is the link: http://forum.xda-developers.com/showthread.php?t=905060
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN_CM7_v3.4.0-cLK.zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN_CM7_v3.4.0-cLK.zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
yep install the TyphooN_CM7_v3.4.0-magldr.zip instead of the one you did
you cannot use a clk rom on magldr...correction you can but its not as easy to setup
hamsterfood said:
Hi i tried installing this rom [25.JUN.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.4.0[2.3.4][A2SD][tytung r10], but i cant load it. This is my first time flashing. I've carried out this way to install.
1. installed stock wm6.5 rom
2. installed 2.08.HSPL
3. installed Task29
4. installed 2.15.50.14
5. installed Magldr 1.13
6. installed MAGLDR 150MB System/5MB Cache (ClockworkMod Recovery v3.0.2.5)
7. Install TyphooN_CM7_v3.4.0-cLK.zip with CWM
8. when rebooting, is stated " nand kernel open failed "
Can anyone teach me how to do this correctly?
Thanks
Click to expand...
Click to collapse
How i do:
1.Instal HSPL 2.08
2.Instal 2.15.50.14,
3.Instal Magldr 1.11 (because with 1.13 i have problem in masstrg mode)
4.Download ClockworkMod 1.2, copy 2 files from folder "to SD" in my SD card
5.Run in CWM, choose instal from sd card/choose zip and choose TyphooN_CM7_v3.4.0-cLK.zip
6. Restart Phone
7. DONE
De4LeR said:
How i do:
1.Instal HSPL 2.08
2.Instal 2.15.50.14,
3.Instal Magldr 1.11 (because with 1.13 i have problem in masstrg mode)
4.Download ClockworkMod 1.2, copy 2 files from folder "to SD" in my SD card
5.Run in CWM, choose instal from sd card/choose zip and choose TyphooN_CM7_v3.4.0-cLK.zip
6. Restart Phone
7. DONE
Click to expand...
Click to collapse
no.
clk is not the same as magldr.
see above for correct directions.
Hi guys
i installed NexusHD2-IceCreamSandwich Beta9 Rom on my HTC HD2 via Mgloader.
I rebooted my device and now there's the problem:
The HTC logo on startup is the latest part of startup i can see now....it always reboots and it doesn't start full.
What did i do wrong???
Found the mistake!
Had to install Kernel....
Installed Kernel but that doesnt affect anything
still bootloop
I tell you what i did:
- Downloaded HD2 NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
- Task 29
- Install Magldr
- Magldr Repartition
- Installed Zip from SD Card (Rom)
- Installed Kernel
It worked.
dannyesl said:
I tell you what i did:
- Downloaded HD2 NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
- Task 29
- Install Magldr
- Magldr Repartition
- Installed Zip from SD Card (Rom)
- Installed Kernel
It worked.
Click to expand...
Click to collapse
works with beta 10 now
thanks
If I want to use Beta 10 now and already have Beta 9 on my Device...
How do I update?
Do I have to do a wipe first?
Or can I just Install zip from sd?
dannyesl said:
If I want to use Beta 10 now and already have Beta 9 on my Device...
How do I update?
Do I have to do a wipe first?
Or can I just Install zip from sd?
Click to expand...
Click to collapse
you can just install zip.
this should work if you have beta 9 already installed
just copy the beta 10 to your sd card and flash it witin recovery