Database Users

[Q] htc hd2 problem booting flashing

i have htc hd2 512 mb french orange rom inside. before a while i try to install costum roms and its pass good i try some roms and evrithing past good until i try w7 rom for hd 2 i note my sd card with this rom make problems so i try and see its just waisting of time and i quit i remove hspl and magloder flash my mobile with stock rome orange via sd card
and now i have huge problem when i boot telephone for meni time its vibre and it stock on htc logo on start up i try flash it from sd again again sometime it boot some time it freeze as i see i have problem with booting i try to run task 29 boot not sucses
please help im reading treads but no sucses any idea ????
thank you

hdalto said:
i have htc hd2 512 mb french orange rom inside. before a while i try to install costum roms and its pass good i try some roms and evrithing past good until i try w7 rom for hd 2 i note my sd card with this rom make problems so i try and see its just waisting of time and i quit i remove hspl and magloder flash my mobile with stock rome orange via sd card
and now i have huge problem when i boot telephone for meni time its vibre and it stock on htc logo on start up i try flash it from sd again again sometime it boot some time it freeze as i see i have problem with booting i try to run task 29 boot not sucses
please help im reading treads but no sucses any idea ????
thank you
Click to expand...
Click to collapse
i put htc hd2 in frigo
and after 10 minutes cooling i reflashe and it boot. and while its on no problem but when i try to off and on its make problems on boot freezing on start up and vibrating for few times and i cant boot remove batery wait a while and boot again. is someone now what is problem am i brick my phone. i try task 29 its not help also hard reset but still problems on booting.
thanks for reponse

please help. more information how its posible one time enter in boot loader its show spl 1.42 second time enter its show 3.03
its stack and vibrating is there solution im one step from breaking it
please help

thank you for ansvers.

This shows full signs for a faulty on board NAND chip. The main board will need to be replaced. I see this issue very often as I fix a ton of HD2's.

[Q] HTC HD2 bricked, can load bootloader cant install any ROM

HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.

to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....

thanks for quick reply
I am trying to do what you instructed me.

Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.

I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.

Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium

The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...

leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!

freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills

Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks

First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse

If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...

Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.

I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?

[Q] Phone Locked! ... gods help me o.O

hello ... uhm, i was ... what i was!? ... well, i tried to return my phone from hspl to ospl version, i flashed magldr and android to windows stock rom, but, when i tryed to flash it from hspl to spl i did this :
- Extracked 'Ruu.signed.nbh' and changed it name to 'leoimg.nbh' than i copied it to my sd card and then i tryed to hard reset my phone ...
- The loading screan was activated and tryed to update something, but then it crashes and now i cant do anything .... i can't flash anyrom, any spl, any bootloader ... it always says that 'Software wasn't updated' (or something like that) .... it seams like its locked ...
so, pls, help me to fix this thing.... thx XDA gods ^_^

We know you're worried, but you have given no details at all,, what model hd2, what stock rom you flashed, what spl shows in bootloader(don't assume you know, check it visually again now) what exactly "the loading screen started..... crashed...blah blah" actually means.
Details details details.

oh god, how rude of me ... well, im useing htc leo hd2 t8585 and i have stock rom windows mobile 6.5 //3.14.405.2// now, but before that i had android 2.3.7 gingerbread 1.1.3 magldr and 2.08 hspl ... i sucessfully removed android and magldr but hspl remains the same .... than, i tried to remove hspl with ospl and when i try to hard reset my phone i see loading screen of ospl but then it pops 'Not allowed' screen .... like its locked or something .... and when i try to boot my phone it stucks again there and redirect me to HSPL picture (u know those colors) and pops the message 'rom update is not finished, try again later ' ... i know it sounds ****ed up

Run Hspl4 with phone in bootloader, choose 3.03.0000, flash stock rom again. If you still get errors you aren't using the correct stock rom for your region/provider.

to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!

aaki_rocker said:
to remove hspl download hspl2 and flash the 1.42.0000spl !!
now try to flash a stock rom !!
Click to expand...
Click to collapse
That's dangerous advice without checking if its deff not a tmous. LOADS of tmouses have been bricked by the owner trying to get to spl 1.x
Just cos he said its a t8585, it wouldn't be the first time a tmous user has referred to it as an 8585

[Q] Tmous or Eu? need help

Dear Dev's / members
I have problem with this HD2 and cannot find a solution yet!
first thing first. is this a Tmobile of Eu mobile?
i tried flashing factory RUU but after 1% it gives an error saying Radio failed.
tried flash quite a few radio's but still after 100% it says radio fail.
tried flashing from USB cable
tried flashing from SD with leoimg.nbh
no luck.
the guy was using android on it until yesterday. may be he tried to flash a wrong Rom which brick the phone. now only white screen appears.
i can go to bootloader mode but no luck in flashing any thing at all.

Looks like EU model as no logo near earpiece.
if also has white markings on call & end key that would help confirm EU.
If trying to install .nbh file from SD it will overwrite HSPL so check current SPL status in bootloader.
If still on HSPL 2.08 try flashing an NRG WM6.5 ROM & see what happens (they have no radio so if completes then try radio flash if needed, try via USB them SD if USB fails.
Do you get an error code when it fails via RUU ?

thanks for helping mr. B
the error i get is (270) and yes it have white markings on all the buttons. so its confirm EU model. by NRG rom you mean Energy Roms? i tried earlier the energy Rom but no luck. after 1% it gives error.
cannot try mtty method as i'm on windows 7 and in windows 7, it's not showing the USB port. it's radio is corrupted. i think someone must have flashed a wrong Rom.

What standard ROM have you got ? if it a 3.14 rom try connecting HD2 via USB & use HSPL4 toolkit to install HSPL 3.03 & if that installs then try the 3.14 ROM via USB & RUU.
Also eliminate simple issues such as lead & USB port by switching port & using a different USB lead.
Windows 7 64bit ? worth trying another PC & 32bit if can as WMDC drivers on 64bit can be a pain for flashing ...

windows 7 32bit. tried flashing hspl 4 and it says complete but in bootloader it shows 2.08 only. i guess gold card method will solve the problem but it's too complicated. any other suggestions?

i would search for task29 and format the phone back to virgin default then download a windows rom from htc via the downloads page on there website for the phone ,then if it works re task29 it then put android on it with the htc hd2 tool kit witch has every thing other than rom (all u need to do is task29 it then go back to the boot loader and run the ruu rom)

samuel79 said:
i would search for task29 and format the phone back to virgin default then download a windows rom from htc via the downloads page on there website for the phone ,then if it works re task29 it then put android on it with the htc hd2 tool kit witch has every thing other than rom (all u need to do is task29 it then go back to the boot loader and run the ruu rom)
Click to expand...
Click to collapse
No do not run a Task 29 the device. I say this for two reasons, one if you flash the Stock Windows Mobile ROM via RUU the RUU will run a Task 28 before installing the ROM witch is pretty much the same as a Task 29. The second reason is that if you run a Task 29 it will remove the current ROM on the device so it will not have a working ROM anymore. If after the Task 29 you can not get another ROM installed on it the you will not be able to use the device at all anymore.

why not he thinks its bricked so there is no difference if he cant get a rom on it

samuel79 said:
why not he thinks its bricked so there is no difference if he cant get a rom on it
Click to expand...
Click to collapse
No the device is not bricked, a bricked device will not even turn on at all, no vibrations no nothing.
At jacktackle, try to find the earliest stock Rom RUU for your HD2 and try to flash it. It is possible you have what is reffered to as a stuck radio.The only fixI have seen for this is to flash a older ROM version with a older SPL version. If the earliest ROM version does not work start working your way up one version at a time and you might get lucky and get one that will flash.

thanks for all the help guys. but nothing worked. tried flashed old ruu's but reboots at 1% this radio is screwed up. hspl 2.08 is not upgrading nor downgrading. sd card update not working. i guess thats it. will give it back to him so that he can showcase it
first time ever i'm un successful. bad luck! may this LEO rest in peace. 'amen'

jacktackle said:
thanks for all the help guys. but nothing worked. tried flashed old ruu's but reboots at 1% this radio is screwed up. hspl 2.08 is not upgrading nor downgrading. sd card update not working. i guess thats it. will give it back to him so that he can showcase it
first time ever i'm un successful. bad luck! may this LEO rest in peace. 'amen'
Click to expand...
Click to collapse
Before you give it back you can find some of the old test ROMs for the EU or for the TMOUS depending on which version of the HD2 it is. Just make sure if it is a TMOUS that you do not flash a rom version that has a 51 radio with it. Just look at the RUU name and the radio version is in the name. If that does not work then the only fix will be to replace the mainboard cause JTAG would not fix the problem.

After Hspl i installed a rom then my phone does not even boot

I have tried hard reset / soft reset please help there is noting turning on
i have tried nand and every other hspl tool the phone needs to be on to work
its not powering up at all
Thanks

it would help if you told us what version of hd2, and what rom you flashed, , , for example (and this happens a lot) if you have a tmous (t mobile US, , green send key) and yiou tried to flash any stock rom except speicifically tmous roms (to change teh language, for example) then you bricked it.