MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android
(the light nbh from http://forum.xda-developers.com/showthread.php?t=711692)
after i flash it the ppc(xv6850) shows the htc logo in 1 minute then restart and then shows the logo and restart again again what should i do?
Related
Hello,
I did a partition create with ubuntu.
After it, it started androidinstall.exe from the fat32 partition.
After a while i get this screen.
(see pic)
There it ends, when i open press my middle button this happends
(See pic)
and then the phone reboots
and starting windows again.
Well i try to do it all over.
But i think the 5 mins has past and it still shows the android logo.
not blinking just the logo
Background: I bought this phone on ebay mainly for development testing of apps. The seller has a high reputation and said that the device would boot to the insert sim card prompt. Upon receiving the phone it always boots to the download mode, I am new to Windows Phone 7, I tried to get it to hard reset, I downloaded Samsung-i917-Focus-firmware-UCJK2-ATT-USA.exe extracted the files and installed the usb drivers. The 7.05 version of the program runs copying files to the phone and you can see a progress bar at the bottom of the download mode screen. When it gets to the end and reboots it immediately goes back to the download mode screen and from videos I have found it should go to a transfer screen. The program does still go with the rebuilding part but the phone stays on the download mode screen. I have waited over an hour after the program said it was complete. I have also pulled the battery after a half hour and on pressing power it goes back to the download mode screen. Hardware version 1.3
Any help with this is greatly appreciated.
I might have bricked my LG G2.
Here is everything I did:
-I rooted the phone with the IO root kit
-wanted to installed a recovery so I installed TWRP manager
-applied SD card patch
-tried to install recovery with TWRP manager several times but app always crashed
-installed SDK on the PC
-started adb and executed "adb reboot bootloader"
the phone got a backlight screen and hasnt been reacting so far.
When I held the power button the screen went black but sometimes the backlight appeard again. I don't know how to reproduce the backlight though.
adb can't detect the phone when connected to the PC.
As soon as I plug it in dozens of Partitions show up. Windows show an error message for each of these partitions. It says I have to format the volumes to use them.
After testing I realized that everytime i long-press the power button for a few seconds the windows errors start popping up.
When i long pressed the power button for 30+ seconds to completely shut it down the notification LED started blinking red 8 times in roughly second intervals. then there was a short break and the 8 blinks repeated.
Thank you for all help, it would suck to have a 1 day old phone broke...
You probably chose the wrong device in TWRP Manager. Choosing the wrong device can easily lead to a brick because TWRP Manager may attempt to flash to the wrong partition. The G2 does not have a TWRP Manager flash available due to loki, so you couldn't have chosen the right device.
Almost have the same problem... the only difference is my black screen is blinking continuously while it is connected to the mac... Seems like it tries to boot but gets blocked and retries in a loop. Tried around now for two evenings without any progress...
Anybody who can help?
I can't boot my LG G2 since I attempted to install Cyanogenmod 13 to it. It is not a "Security Error" that I can fix by flashing to stock rom. When I press and hold the power button it usually shows nothing, but sometimes it shows the logo for half of a second and goes black. I can't acces download mode or recovery, and when I tried to connect it to my pc, it opened dozens of driver(like C:\, D:\) errors, so I plugged it out and all of them gave error by saying can't open, parameter error, format the disk etc. I really need urgent help!
By the way I had downloaded opengapps and cyanogen mod 13 when I was able to access twrp.
I should add this: it continues working there is a shining black screen all the time. If I try booting it when it is out of charge, would it work?
P.S: When I connect it to a PC this shining black screen is winking.
Hi guys .. so i downloaded a custom theme from here ( dna aos-p black ) .and it worked however when i restarted my phone it was all messed up so i went to reapply it and then my phone restarted and now is stuck in boot loop.. it shows flashing Samsung logo and then optimizing apps and the turns off and repeats..
Phone is on android 8 with may security patch ... PLEASE HELP.. And thanks..
if memory serves you need to:
- while the phone is booting - once the Samsung logo starts appearing, press and hold "volume down + power button"
if it doesn't reboot then try playing around with your timing - when to start pressing both buttons.
if you get the timing right the phone should reboot into download mode form where you can flash the latest stock ROM
--
I've gotten myself into many a boot loop while flashing ROM's that didn't "sit well" with my SM-G9500.