Related
When I receive a call, voice command announces it as it should, lowering the ringtone volume to announce over the top of it, problem is, it's reducing the volume too much, and I can't hear it speaking...
Does anyone know a way of:
a. Preventing voice command from lowering the volume at all?
b. Increasing the gain on voice command's announcements?
Any and all help is appreciated, thanks.
hah, when i used MS voice command my problem was that it didn't lower the ringtone enough.
I have no clue how to do what ur asking for, after a while i just turned my ringtone off and just had the announce of the name and number.
I got this CAB file from another post.
It did the trick for me.
Hi,
Start Menu->Settings->Voice Command
Choose Phone, then click Options, Remove checkbox to 'announce incoming calls'. Now your ringtone will rin normally.
--
NB
nextbond said:
Hi,
Start Menu->Settings->Voice Command
Choose Phone, then click Options, Remove checkbox to 'announce incoming calls'. Now your ringtone will rin normally.
--
NB
Click to expand...
Click to collapse
The problem is that I want the nice lady to announce the name of my caller, and I want the phone to play the ringtone I have set
MPIIIMan said:
I got this CAB file from another post.
It did the trick for me.
Click to expand...
Click to collapse
What does this cab file do? is it modification to Voice command, or is a simple registry hack?
Hello
Use any registry editor like resco and do the following
Goto current user
Then control panel
Then sound categories
Then voicecommand1
And change the atenuationcategory from 3 to 1
That will do the thing. The lady will be louder.
Theses suggestions seem to make little or no difference, the only change seems to be that the music isn't turned down as much.
I've tried manually making the changes, and running/instaling the cab file "MPIIIMan" presented me with.
Is there any way I can physically change the program to increase the gain? I don't mind if I have to dissassemble code or anything to make changes, but i'd like to get it sorted...
I'd use cyberon, but I can't find ANY working links for it on either Limewire, IRC, or any websites, either the full program or a demo... Has it dissappeared from existance???
i_am_impossible said:
Hello
Use any registry editor like resco and do the following
Goto current user
Then control panel
Then sound categories
Then voicecommand1
And change the atenuationcategory from 3 to 1
That will do the thing. The lady will be louder.
Click to expand...
Click to collapse
This worked for me. Made the lady louder - ringtone volume remained the same. Thanks.
BTW, I noticed there's another setting in that registry key called "initvol" and it's said to 5. My best guess would be initial volume? Anyone try playing with that to see what that does?
MPIIIMan said:
I got this CAB file from another post.
It did the trick for me.
Click to expand...
Click to collapse
Can you explain exactly what htis cab does, or maybe link us to its original post?
I got this cab file from another post.
You would have just as much luck finding it as I would.
I believe it's just a registry edit
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\VoiceCommand1]
"AttenuationCategory"=dword:00000001
"InitVol"=dword:00000005
"Script"="p"
@=""
Hi,
I've just got an XDA mini S on O2. Despite the check box in the messages section being unchecked, the sound being entirely off or on vibrate and the setting in sounds and notifications being left off, I still get the really irritating SMS sent message and ring tone. I don't mind the pop up but I want the phone to actually be silent when I tell it to be. I've tried the Reg changes using Total Commander - both SMSNoSentMsg and SMSDisableNotification neither seem to work. Any help would be greatly appreciated as this is driving me mad.
Thanks
Tom
tmcox said:
Hi,
I've just got an XDA mini S on O2. Despite the check box in the messages section being unchecked, the sound being entirely off or on vibrate and the setting in sounds and notifications being left off, I still get the really irritating SMS sent message and ring tone. I don't mind the pop up but I want the phone to actually be silent when I tell it to be. I've tried the Reg changes using Total Commander - both SMSNoSentMsg and SMSDisableNotification neither seem to work. Any help would be greatly appreciated as this is driving me mad.
Thanks
Tom
Click to expand...
Click to collapse
I'm not sure what version of Windows Mobile you are using on your device, but there is a way to correct this in WM6. Download and install the program I have attached below and then configure it however you like.
It is called Schaps Advanced Configuration Tool. It will allow you change a number of settings including the Message Sent notification.
This should work for you. Good luck!
Dan.
its wm5. the latest from O2.
Would that tool work in wm5?
To tell you the truth, I don't know. I have never tried it on WM5.
The only thing I could really tell you is to give it a try and if it didn't work then what do you have to lose? If it doesn't work then just un-install it.
I tried it and it didn't work.
Thoroughly annoying.
tmcox said:
I tried it and it didn't work.
Thoroughly annoying.
Click to expand...
Click to collapse
Hmmm... I don't know any other way. Sorry man. Try flashing WM6 to your phone and then install it. This way I know it will work.
Hmmm....
Nice one, I'm using WM6.
I'll try this one this week.
tmcox said:
Hi,
I've just got an XDA mini S on O2. Despite the check box in the messages section being unchecked, the sound being entirely off or on vibrate and the setting in sounds and notifications being left off, I still get the really irritating SMS sent message and ring tone. I don't mind the pop up but I want the phone to actually be silent when I tell it to be. I've tried the Reg changes using Total Commander - both SMSNoSentMsg and SMSDisableNotification neither seem to work. Any help would be greatly appreciated as this is driving me mad.
Thanks
Tom
Click to expand...
Click to collapse
First download totalcmd (another file browser)
Create a blank wav file.. call it notify.wav (sometimes notify.wma)
Use totalcmd to replace the one in the windows directory with the one you created..
It works with some versions of wm5 though, so good luck..
I finally got it to work using the blank wav method above. Took a while as I forgot to change the read only bit. Bizarrely I can't delete the original so currently have 2 versions according to some explorers but only 1 according to others. Either way a test proved that I no longer get the tone.
HURRAH
Fantastic stuff guys, this has been annoying the hell out of me for ages. It is the notification of how much credit left on the PAYG card from O2. Does my head in!
Disable SMS Sent Notification
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
Click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
Name the New Key as "Settings"
Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
Soft reset your device
What about notifications of the network?
There are some notifications (i.e. network messages) that still notify with a sound even when the device is on silent mode. Is there any workaround on this?
Great program! I was wrecking my brain trying to figure out how to disable the notification sound on my Htc Touch, none of the registry hacks worked for me.
Awesome app! I can't thank you enough for posting it--that noise was getting really irritating.
thanks dharvey for the application!!! it works great!! no more irritating notification!!! =)
Guys,
Good day all,
I'm very sorry in advance if this is a repeated topic but actually i found a lot of threats that talks about the ringing tone problem.
I wonder if anyone would provide me here with the cab. file that fixes this problem, i'll be very thankful.
Also i'm from Egypt and i bought SE X1 from UK so the arabic language is not enabled in it.
so would you please send me also this program as i need to have this feature enabled in my mob.
reading the arabic message is very important
so please HELP
thanks guys a lot in advance.
:/ next time kindly search..
http://forum.xda-developers.com/showthread.php?t=446711
billybobjones said:
:/ next time kindly search..
http://forum.xda-developers.com/showthread.php?t=446711
Click to expand...
Click to collapse
thanks dude
i tried it already and it didn't work!!!
don;t know why, anyways let's download it again and see
so what about the ringing tone issue??
Dears,
Good Day,
Any help here???
Dears experts,
is the ringing tone problem, a problem with no solution or what?
Well, the arabic support file works fine with, im using US-en interface but sure can send/receive messages in arabic.
>> http://forum.xda-developers.com/showthread.php?t=446711
Regarding the ringtone volume, what's exactly the issue you need to fix?
I did not read about it here, at least recently as i recall. Have you?
DaHiA said:
Well, the arabic support file works fine with, im using US-en interface but sure can send/receive messages in arabic.
>> http://forum.xda-developers.com/showthread.php?t=446711
Regarding the ringtone volume, what's exactly the issue you need to fix?
I did not read about it here, at least recently as i recall. Have you?
Click to expand...
Click to collapse
Dude thanks a lot for replying.
i tried this prog. but it gives me out of license error,
what can i do now?
And about the ringing tone problem, its' volume is too low
i need a program to fix this very very big problem.
i don't know how SE put a great phone in the market with a problem like this !!!
mabdelwahed said:
Dude thanks a lot for replying.
i tried this prog. but it gives me out of license error,
what can i do now?
And about the ringing tone problem, its' volume is too low
i need a program to fix this very very big problem.
i don't know how SE put a great phone in the market with a problem like this !!!
Click to expand...
Click to collapse
Hi. I didn't find any problem with my X1's ring tone. Please don't select mp3 or polyphonic ringtones that has very low recording volumes, because X1 will not be able to enhance the low volume of such tones. Try this tone, like phones.mp3, which i donwloaded from SE X1 site. This tone is very loud for me, if it is not in your phone then there might be a problem.
Note also the position of the speakers in X1, its at the bottom area left and right side, almost to the same level of CALL and END botton. When you are holding your X1 or if it its inside the pouch then the speakers are obstructed, giving you a low ring sound.
I have tried to search but no avail, Can someone PLEASE guide me / Navigate me about how can I increase the earpiece sound.
I am using VOIP on my Diamond, the problem is that I have to plug the earpiece to listen the next person, even though the incoming voice is still soo low, I have read some time ago on this same forum that you can increase the earpiece sound strength through the registry, BUT HOW (what key, where).
I have tried the buit-in equalizer software but that seems to only work with songs not for telephone conversation.
Any help please
Regards
Sid
hi sidd u need to go to HKCU-control panel-sound categories- in call. set initial volume to 4.......
Hi there,
I would also like to have higher volume using earpiece - although up to now I thought pressing VolUp while in call was the max one could get...
Do you have more infos about these reg-settings? In SoundCategories I have:
InCall -> InitVol = 2
InCall2 -> InitVol = 5
InCall3 -> InitVol = 4
thx
hey let those values stay the same just change in call.... dont forget to soft reset....
04653 said:
hi sidd u need to go to HKCU-control panel-sound categories- in call. set initial volume to 4.......
Click to expand...
Click to collapse
Hi 04653,
Thanks for advising, I have changed the 2 to 4 as you said but can not feel any difference, can I increase more e.g. 6 ???.
Regards
Sidd
hi sidd u need to change the audio para in the windows folder. using resco or total commander copy this file into the windows folder and replace original.
note:try this is at ur own risk. worked for me so.......
04653 said:
hi sidd u need to change the audio para in the windows folder. using resco or total commander copy this file into the windows folder and replace original.
note:try this is at ur own risk. worked for me so.......
Click to expand...
Click to collapse
anyone have tryed this ?
Yes i tried, and it works good, but install the light version, because the full may brick the sound
Dr.Tenma said:
Yes i tried, and it works good, but install the light version, because the full may brick the sound
Click to expand...
Click to collapse
Is there a special version of this lite csv for diamond, or is it cross compatible with all recent devices? I'm new to Diamond.
for some reason wheni installed that audiopara file my sound went way down. i could hear on the phone ok but anything else that used the speaker wouldnt work (ie: wmplayer) i have the htc touch pro from alltel
This solution increases:
MICROPHONE VOLUME
IN-CALL VOLUME
SPEAKER VOLUME
RINGTONE VOLUME
MUSIC PLAYER VOLUME
and has been tested and working 100%
I've decided to share a ONCE-AND-FOR-ALL solution for all the X2 users and the general population of windows mobile users.
Here's the solution:
First, you need totalcommander. Google it.
1) Open TotalCommander
2) Go to ftp\\registry\HKCU
3) Change ALL the following to the value specified:
HKCU/Control Panel\Phone\vol\65535 (General volume of the X2 including microphone input!)
HKCU/ControlPanel/SoundCategories/InCall/Initvol\5
HKCU/ControlPanel/SoundCategories/Ring/5
HKCU/ControlPanel/SoundCategories/System/5
HKCU/ControlPanel/SoundCategories/Attentuation\All to 5
HKCU/ControlPanel/SoundCategories/InCall/InitVol\5
HKCU/ControlPanel/SoundCategories/Ring/InitVol\5
4) Soft-reset
5) Press the volume up key and set it to the 5th indicator (Max)
6) Press volume up key 1 more time, and you will hear an additional beep 200% louder and the indicator marker remains the same at the 5th marker on the top. This means you have sucessfully tweaked your volume!
6) Do step 5 again with in-call and congrats!
Enjoy your beloved X2 =)
I am satisfied with the default volume levels and will leave it as is.
Do note people, increasing output levels beyond the specified levels can damage your speakers!
sounds good. is it possible for someone to make a registry file of this? so we can just run it and it does it all for us noobs lol. (like the sd card fix)
although im not sure i need to increase the microphone input level, is it possible to leave that out.
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
macklobell said:
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
Click to expand...
Click to collapse
use some other app for registry change just google it ... this is ok for me..now l can acctually hear my phone when it is in the case in the pocket...super
royalbloodvi said:
3) Change ALL the following to value 5 in decimal
Click to expand...
Click to collapse
Hi, would you mind clarifying this value/number. In the first value my default is 65535... are you saying that this value should just be '5'. Not 55555?
thanks
tokyo78 said:
Hi, would you mind clarifying this value/number. In the first value my default is 65535... are you saying that this value should just be '5'. Not 55555?
thanks
Click to expand...
Click to collapse
leave it as 65535, corrections made.
i changed all the values you said,expcept HKCU/ControlPanel/SoundCategories/System/5
because i dont have it and nothing happends,volume is still the same.
i'm sorry but can u please make a cab file as i'm a noobie i don't want to stuff up my phone and have to do a master reset.
If your capable of making a cab file for this, trust me a lot of people will be happy and appreciate it.
If your capable of making a cab file for this, trust me a lot of people will be happy and appreciate it.
macklobell said:
Couldn't get totalcomander to work!!!! Which file did you download? It says if you have a touchscreen to download the pocket pc version...Did you download the installer or just the cab files? Thanks.
Click to expand...
Click to collapse
You dont have to use totalcommander. Since it is a registry tweak, you can use a simple Registry Editor that you can download from Windows Marketplace for free
Bro.
I think if the cab file available, it more pleasure like audiopara cab file
TQ
royalbloodvi said:
This solution increases:
MICROPHONE VOLUME
IN-CALL VOLUME
SPEAKER VOLUME
RINGTONE VOLUME
MUSIC PLAYER VOLUME
and has been tested and working 100%
Enjoy your beloved X2 =)
Click to expand...
Click to collapse
Doesn't work for me and I can't find HKCU/ControlPanel/SoundCategories/System.
Sucks, this is my only complaint with X2.
hey can you make a cab file for this registry?? much appreciated
Not working on mine!
Did not change anything noticable on mine!
michaelthemage said:
Did not change anything noticable on mine!
Click to expand...
Click to collapse
Didn't find any change.
No changes to my xperia x2 either..
I've been dealing with low volume issue of WM since my O2 atom but not for my Samsung Valencia (c6625), so I just copied all samsung's ringtones and alarms from my valencia and use it in my X2, hahaha . they are sound nicer and louder! SE could have done much much better providing us lots of (nice and loud) ringtones just like samsung did.
i have found a program that increases your volume
Many Many Many thanks to HS_LuKa_ i want to tell that the application is perfect and sound is very loud and if u receive error when run it first time just restart the phone ,
thanks again HS_LuKa_