Does anyone have any experience with this program?
If yes,
1) Is it possible to build a OS for a custom device?
2) Is there a way to extract files from a magician ROM?
3) Is it posible to import magician drivers in the platform builder?
4) Can platoform builder create a ROM file with WM2005 to be used with the magician?
Any help is highly appreciated
andrew_sh said:
1) Is it possible to build a OS for a custom device?
Click to expand...
Click to collapse
Yes. I've managed to boot Pentium 3 with WinCE 4.20 about 2 years ago. Have not tested this with WinCE 5.0 but it should work.
2) Is there a way to extract files from a magician ROM?
Click to expand...
Click to collapse
Yes. Dumprom.
3) Is it posible to import magician drivers in the platform builder?
Click to expand...
Click to collapse
Mostly no. But several files can be imported.
4) Can platoform builder create a ROM file with WM2005 to be used with the magician?
Click to expand...
Click to collapse
Of cause it can.
But noone can use a trial PB to create WM5 ROM without BSPs. Only WinCE 5.0 ROMs can be created for a limited set of devices.
thank you very much
Hey, ive just installed the new PB and want to build a CE5 rom for a PC. Can you give me some tips on how you did it?
I also have a thin client box the Compaq T20, it has embedded NT4 atm and id love to put wince 5 on it too, if you have any helpfull hints id love to hear them.
Ive managed to build a rom, but im not sure how to make it work on a PC or the T20...
mamaich, if i wanted to build a rom for a HTC phone, how would I start?
Choose Xscale BSB, then maybe add some drivers, then how do I get it on the phone?
I don't want to have a fully functional OS, just to experiment. Are there any chances of destroying the bootloader or anything? If you have any experience or any tips please answer
andrew_sh said:
mamaich, if i wanted to build a rom for a HTC phone, how would I start?
Click to expand...
Click to collapse
You should start with Himalaya BSP. But you don;t have it of cause.
Huge free ROM memory soon ! Look at the end of the thread
After reading this introduction go here http://forum.xda-developers.com/showpost.php?p=11498888&postcount=48
to get update
Hi.
Here You have my WM6.5 radio 1600 "anti-ROM" :
- None HTC software ( I do not need it and I do not like it - SPB Shell is all what I need )
- None huge menus like in 6.5.x ROMs
Based on Malezya English rom. Cleaned by me as far as I needed so what You can find it:
1) As .cab so removable :
a) SPB shell in OEM registered 3.01 version . It is full functional and do not require registration but I guess that You like me will upgrade it to 3.5.5 version.
Having such version You can get registration key for 3.5.5 version directly from SPB manufacturer
With 3.01 version You have 103.5 MB of free RAM at boot. With 3.5.5 version
You have 100.5 MB of free RAM.
b) Full functional ArcSoft software :
- MMS composer
- Streaming Player
- Photo Base
c) Registered full functional CorePlayer
d) Total Commander
e) .cabs for :
- WM menu removal ( simplified version of colegue mirolg .cab )
- common known .cab for shutter sound removal
2) Not removable :
- fdcTaskMgr - tool which every system developer should have
- Office 2010
- Windows Media Player with .mp4 support
- BT icon notifier - taken from internet
Additional features:
3) Own created "Power" directory where You can find software for :
- system restart
- system standby
All above created by myself
- system power off
- backlight off - created by me too . In this configuration , one can switch backlight on by taping the screen not pressing power button.
And...... what I am especially proud, I put battery driver right at last
Not completely but I hope You will like it
As You remember our TG01 has some annoying features :
1) Sometimes voltage gauge drops too much and does not return until restart
2) When battery level goes down do 20% ( not real level but gauge level ! ) we get:
a) notification from system - can be omited
b) some applications do not want to start or even if they will start at for example 30% battery level, they stop when battery reaches 20% and less.
In my case it was Wi-Fi manager and camera.
c) when battery level reaches 0 %, tg01 switches off without any user interaction. When it happens, battery level is about 3.5V
Some of You know my software battery driver manager for battery driver stopping/restart . It is any solution but not nice and do not prevent be all described cases.
What exactly I did in this ROM ?
I have written my own driver which is stub on oiginal battery driver.
It works the way that when original battery driver says "20% or less" , it says it to me not to the system. To the system I say "26%" .
No matter whether original driver says 20%,10% or 0% , I say to system 26% so as You can see, all system gauges will show 26%. That is why all software on our tg01 will always work untill .... not 0% but real "hardware death". You can discharge battery to even 2.9V until hardware say "enough". It is safe for battery. Absolute minimum level is 2.75V .
Mentioned value 26% is configurable but has been choosen above 25%. When I have 21% , Wi-Fi still was saying it is not enough. You can of course set it to 100%
Other feature concerned with this stub driver is additional battery level icon at upper bar from the left. It shows this value what original battery driver would show without my stub. It switches on , original battery driver say that level is <= 20% . It switches off when original battery driver says that level is >= 30% .
I did it so that user knew what is "real" battery level when system gauges show 26%
With this rom of course You do not have to use ( it is even forbidden ) my battery driver manager.
Uffff.
Thanks for Mangasora for His clean roms left on this forum and leeston2379 for very initial test of my build.
And thanks to others for some icons and maybe other features I forgot to mention about.
here my rom:
http://www.sendspace.com/file/3nojhf
Regards
fxdjacentyfxd
Nice ROM my friend! It looks good! I am quite interested in your battery driver solution.. Could you pls upload the drivers so i can test on my current 6.1 rom. any chance i could import this driver into other roms?
Cheers!
fxdjacentyfxd said:
Hi.
Here You have my WM6.5 radio 1600 "anti-ROM" :
- None HTC software ( I do not need it and I do not like it - SPB Shell is all what I need )
- None huge menus like in 6.5.x ROMs
Based on Malezya English rom.
Click to expand...
Click to collapse
Looks very nice. Just testing it. I agree with you: I like WM6.5 +SPB Shell a lot!
By the way, welcome to the Rom's table:
#194 14/02/2011 6.5 fxdjacentyfxd fxdjROM1 21840 5005.1600.05 E
ROM Table HERE
Pere said:
Looks very nice. Just testing it. I agree with you: I like WM6.5 +SPB Shell a lot!
By the way, welcome to the Rom's table:
#194 14/02/2011 6.5 fxdjacentyfxd fxdjROM1 21840 5005.1600.05 E
ROM Table HERE
Click to expand...
Click to collapse
Thanks Pere.
It is nice to hear that someone test it at all
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Thanks Pere.
It is nice to hear that someone test it at all
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
Hi fxd! Im quite interested in your fantastic work... How did you manage to rewrite these drivers? is there anyway to incoprate these into existing ROMs?
Cheers! i will see if i can try your ROM this weekend!
olyloh6696 said:
Hi fxd! Im quite interested in your fantastic work... How did you manage to rewrite these drivers? is there anyway to incoprate these into existing ROMs?
Cheers! i will see if i can try your ROM this weekend!
Click to expand...
Click to collapse
Hi olyloh6696.
Do not be angry at me, but watching that people are not interested to have their system a little bit fixed ( I know, icons and skins are more important ) I decided that if someone will want this driver I will give it provided :
1) The person will test my rom and tell me this feature works ok/nok ( I did not test it enough strong so far, so the driver may have any bugs and maybe it does not work the way people expected ) and then whether he is still interested to get it.
2) Binary installer will be in personalized form - only for given person so I will require IMEI number.
3) Any asks for PM
Best regards
fxdjacentyfxd
fxdjacentyfxd said:
Hi olyloh6696.
Do not be angry at me, but watching that people are not interested to have their system a little bit fixed ( I know, icons and skins are more important ) I decided that if someone will want this driver I will give it provided :
1) The person will test my rom and tell me this feature works ok/nok ( I did not test it enough strong so far, so the driver may have any bugs and maybe it does not work the way people expected ) and then whether he is still interested to get it.
2) Binary installer will be in personalized form - only for given person so I will require IMEI number.
3) Any asks for PM
Best regards
fxdjacentyfxd
Click to expand...
Click to collapse
ok, i will see if i can test your ROM. but personally i prefer windows mobile 6.1+ htc touchflo. So i will test the ROM for you for bugs. But i don't think it will be my permanent ROM. So these drivers can be put into other ROMs? what process is it?
Cheers
olyloh6696 said:
ok, i will see if i can test your ROM. but personally i prefer windows mobile 6.1+ htc touchflo. So i will test the ROM for you for bugs. But i don't think it will be my permanent ROM. So these drivers can be put into other ROMs? what process is it?
Cheers
Click to expand...
Click to collapse
also i doubt there will be many bugs in this rom. it id based on mangosoras 6.5 rom with spb shell added. So i guess the bugs will be related to his ROM. But we will need to bug test to see if the drivers are stable.
cheers
olyloh6696 said:
also i doubt there will be many bugs in this rom. it id based on mangosoras 6.5 rom with spb shell added. So i guess the bugs will be related to his ROM. But we will need to bug test to see if the drivers are stable.
cheers
Click to expand...
Click to collapse
Mangasora clean roms were only knowledge base how to clean but rom itself it is original Malezya English with my cleaning. This original rom "on good day" has as only official rom I know, just spbshell in registered 3.01 version.
Regards
fxdjacentyfxd
olyloh6696 said:
ok, i will see if i can test your ROM. but personally i prefer windows mobile 6.1+ htc touchflo. So i will test the ROM for you for bugs. But i don't think it will be my permanent ROM. So these drivers can be put into other ROMs? what process is it?
Cheers
Click to expand...
Click to collapse
Oh olyloh6696, I do not order You to use it as permament rom . I only would like You to test it especialy in this battery driver stub context.
As a matter of fact maybe some day I will return to WM6.1 . ffboy's rom was very good.
I guess that there should not be problems to install it on WM6.1 but I have to test it. It is simply loadable driver with supported utils( applications). Driver itself works after loading in context of devices.exe as any driver should.
regards
fxdjacentyfxd
fxdjacentyfxd said:
Oh olyloh6696, I do not order You to use it as permament rom . I only would like You to test it especialy in this battery driver stub context.
As a matter of fact maybe some day I will return to WM6.1 . ffboy's rom was very good.
I guess that there should not be problems to install it on WM6.1 but I have to test it. It is simply loadable driver with supported utils( applications). Driver itself works after loading in context of devices.exe as any driver should.
regards
fxdjacentyfxd
Click to expand...
Click to collapse
cool! i will see if i can find some free time this weekend to test it. i lookk forward to using your new drivers
Thanks
After one year of cooked roms, this is the first serious advance to bypass the stupid 20% Toshiba's limitation.
It's just a roundabout, but it's the first step.
I've been using your battery driver manager since its launching and it's very useful! I've created a direct access and when the silly Toshiba's 20% warning pops up, I can stay working until the real 0% battery voltage
http://forum.xda-developers.com/showthread.php?t=941318
Well done fxdjacentyfxd!
Pere said:
After one year of cooked roms, this is the first serious advance to bypass the stupid 20% Toshiba's limitation.
It's just a roundabout, but it's the first step.
I've been using your battery driver manager since its launching and it's very useful! I've created a direct access and when the silly Toshiba's 20% warning pops up, I can stay working until the real 0% battery voltage
http://forum.xda-developers.com/showthread.php?t=941318
Well done fxdjacentyfxd!
Click to expand...
Click to collapse
Thanks Pere.
As I mentioned in first post here, my battery manager it is a past and "old" solution.
Driver included in my rom does it without any user interraction and does not disturb ( stops or restarts - simply uses answers from original battery driver ) original battery driver.
Once installed, user forgots about 20% problem in TG01.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Thanks Pere.
As I mentioned in first post here, my battery manager it is a past and "old" solution.
Driver included in my rom does it without any user interraction and does not disturb ( stops or restarts - simply uses answers from original battery driver ) original battery driver.
Once installed, user forgots about 20% problem in TG01.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
I can confirm it.
Before achieving the 20% level I didn't understand completely how your driver worked. And it's easy and brilliant! When battery indicator is near 21% , the red indicator says (as the petrol/gasoline indicator does in your car) that you are draining your battery...20%..10%... up to 0%!! Meanwhile the "windows" indicator shows 26% as you "cheat" the system.
Again: Brilliant!!!
Pere said:
I can confirm it.
Before achieving the 20% level I didn't understand completely how your driver worked. And it's easy and brilliant! When battery indicator is near 21% , the red indicator says (as the petrol/gasoline indicator does in your car) that you are draining your battery...20%..10%... up to 0%!! Meanwhile the "windows" indicator shows 26% as you "cheat" the system.
Again: Brilliant!!!
Click to expand...
Click to collapse
For such people it is worthy to do effort and write some software
Regards
fxdjacentyfxd
Hello
The last rom I used was this
Bonus:
Empty_ROM_TG01_WWE_23689_ (Windows Classic) 6.5.3 build Windows CE WM: 5.2 Build 4593 (15 August 2010 г. 15:44:20)
Free 269 MB ROM
96 MB free RAM
Radio: 5001.1800.28
Direct Link: http://www.4shared.com/file/fIL4Jbot...689__Clas.html
WM Update build and bug fixes, BubbleBreaker works.
Thank DFT, for the Opportunity to test new builds. Special thanks to Boomer. DFT 谢谢, 有 机会 测试 新 版本. 特别 感谢 Boomer.
this in this thread and post 77
http://forum.xda-developers.com/showthread.php?t=743379&page=8
I was functioning very well and also had a trick with this rom is that when installed, to a hard reset and let the 350 MB ROM, I have tried several times and has always worked.
The fact is that seeing this rom the battery driver I've tested and works perfectly and you can use the wifi to deplete the battery.
I also operate in the iGO8 TTS voices. So I'm super happy with this rom.
One could try to get the 350MB of ROM of the other rom on this? Would it be possible?
Of course, this rom has it disabled WM start menu, right?
A greeting and thanks
Note: Sorry for my bad English
koku37 said:
this in this thread and post 77
http://forum.xda-developers.com/showthread.php?t=743379&page=8
I was functioning very well and also had a trick with this rom is that when installed, to a hard reset and let the 350 MB ROM, I have tried several times and has always worked.
Click to expand...
Click to collapse
Hmm, I have never heard abot tg01 having more than about ~270-280MB of free ROM. You can see this value in system info ? Can You show any link that confirms it ? Even author ( user feropont ) says abot 269MB.
Colleagues, do You know something about it ?
koku37 said:
Of course, this rom has it disabled WM start menu, right?
Click to expand...
Click to collapse
Yes, it has WM start menu disabled.
Regards
fxdjacentyfxd
Hello
So I wanted to comment, is that he puts 269 MB but if you do a hard reset my 350MB has always given me free.
Wonder why. One could try in your rom somehow try to get the 350MB. Then would be the perfect rom.
I will install the rom farepont and try and make a catch. From all I've tried, I just happened in this rom.
Then return to your rom and shape it.
A greeting and a great job.
Sorry for my bad English.
koku37 said:
Hello
So I wanted to comment, is that he puts 269 MB but if you do a hard reset my 350MB has always given me free.
.
Click to expand...
Click to collapse
Could You do some test ? ( maybe You did it already )
If system says after hard reset it has 350MB free ROM, try simply to copy one or few files to TG01 flash. Ensure that total size of copied files is about 350MB. We will see how big is free rom then.
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Could You do some test ? ( maybe You did it already )
If system says after hard reset it has 350MB free ROM, try simply to copy one or few files to TG01 flash. Ensure that total size of copied files is about 350MB. We will see how big is free rom then.
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
that extra ROM would be nice too i will try this ROM out later today (or tommorow) and let you know about any bugs. I look forward to your new battery drivers!
Hi All,
Can someone help me upgrade my HTC Touch Viva (Opal T2223) from Windows Mobile 6.1 to Windows Mobile 6.5.3?
I've no knowledge of flashing however I am reading articles given in this forms: Click Here and will definitely be able to do it.
I am just tired of Windows 6.1 as it is very slow and hanging many times and consume too much battery.
Thanks in advance.
simply follow those instruction ...
that is all
there are some good 6.5.3 rom around in this forum
good luck
aidinvm_ultimate said:
simply follow those instruction ...
that is all
there are some good 6.5.3 rom around in this forum
good luck
Click to expand...
Click to collapse
Well I tried but that didn't work. hence looking for help!
I am very new to this forum and didn't use well after I registered on this website. Can you help me find one?
first of all you must hard -spl your device
here is complete instruction:
http://forum.xda-developers.com/showthread.php?t=446446
then download one of Roms you want
and use CustomRUU ( if rom package only include .nbh file ) or run ROMUpdateUtility.exe ( in the rom package ) to install that
device must be connected to pc in sync mode
it's simple
aidinvm_ultimate said:
first of all you must hard -spl your device
here is complete instruction:
http://forum.xda-developers.com/showthread.php?t=446446
then download one of Roms you want
and use CustomRUU ( if rom package only include .nbh file ) or run ROMUpdateUtility.exe ( in the rom package ) to install that
device must be connected to pc in sync mode
it's simple
Click to expand...
Click to collapse
It's done, thanks a ton brother.
However the phone has a very slow startup now. Hope this would be resolved after a few boots...
Hi guys,
I'm new xda forum member...
So I'm very sorry if this is a stupid question but I'd like to flash my omnia7 unbranded using one of the latest Mi7Roms cooked with TANGO.
In different posts I see that there are several release of these roms.
In this post http://forum.xda-developers.com/showthread.php?t=1782388 mirolg released 3 roms called NOKIA Edition.
I thin that I have to decide between:
- mi7ROM_v2.1 NOKIA edition OS8773_ root manager.zip
- mi7ROM_v2.1 NOKIA edition OS8773_Basis Skin_root manager.zip
But I'd like to know what Nokia Edition means? My device after flashing will appear as a nokia device automatically or is there something to do after flashing rom?
Samsung marketplace will be available or not?
Are there other roms that I can use to get my omnia7 fully unlocked?
I also see in the previous mentioned post that to install some Nokia Apps or some themes on the device we must use the cab sender method instead of standard XAP.
Is it right?
What is the difference between cab sender and xap?
Best Regards
Mousexx74 said:
Hi guys,
I'm new xda forum member...
So I'm very sorry if this is a stupid question but I'd like to flash my omnia7 unbranded using one of the latest Mi7Roms cooked with TANGO.
In different posts I see that there are several release of these roms.
In this post http://forum.xda-developers.com/showthread.php?t=1782388 mirolg released 3 roms called NOKIA Edition.
I thin that I have to decide between:
- mi7ROM_v2.1 NOKIA edition OS8773_ root manager.zip
- mi7ROM_v2.1 NOKIA edition OS8773_Basis Skin_root manager.zip
But I'd like to know what Nokia Edition means? My device after flashing will appear as a nokia device automatically or is there something to do after flashing rom?
Samsung marketplace will be available or not?
Are there other roms that I can use to get my omnia7 fully unlocked?
I also see in the previous mentioned post that to install some Nokia Apps or some themes on the device we must use the cab sender method instead of standard XAP.
Is it right?
What is the difference between cab sender and xap?
Best Regards
Click to expand...
Click to collapse
Nokia Edition means that you can flowlessly install the nokia apps from the marketplace nokia section, before mirolg released this the apps had to be cracked and sideloaded to run on non-nokia phones. After flashing your phone will automaticly "think" it's a nokia lumia 800. For accessing Samsung marketplace you simply have to change the marketplace using some app like MarketplaceConfig or wphTweaks or anything similar, one of them is already installed after flashing.
Some Nokia apps use editional code libraries that are not included in Samsungs windoes phone releases, so you can install them with a cab file. A cab file is actually an update file, just like the ones that zune installs to your phone when you get an official update. A XAP file is a normal application file that can be installed AND uninstalled, while after installing a cab-file the only possibility to remove it again is restoring a backup or flashing a new ROM.
The decision between the two ROMs is simply a question of looks, one comes in standard metro/windows 8 style look, the other one has some changed icons.
I hope I did answer your questions,
fadenfisch
fadenfisch95 said:
Nokia Edition means that you can flowlessly install the nokia apps from the marketplace nokia section, before mirolg released this the apps had to be cracked and sideloaded to run on non-nokia phones. After flashing your phone will automaticly "think" it's a nokia lumia 800. For accessing Samsung marketplace you simply have to change the marketplace using some app like MarketplaceConfig or wphTweaks or anything similar, one of them is already installed after flashing.
Some Nokia apps use editional code libraries that are not included in Samsungs windoes phone releases, so you can install them with a cab file. A cab file is actually an update file, just like the ones that zune installs to your phone when you get an official update. A XAP file is a normal application file that can be installed AND uninstalled, while after installing a cab-file the only possibility to remove it again is restoring a backup or flashing a new ROM.
The decision between the two ROMs is simply a question of looks, one comes in standard metro/windows 8 style look, the other one has some changed icons.
I hope I did answer your questions,
fadenfisch
Click to expand...
Click to collapse
Great answer..
thank you so much...
I will flash my Omnia as soon as possible because chewron labs token are expired. :fingers-crossed:
Another question if you know the answer...
After flashing my omnia with custom rom, does syncronization with zune still works or no (file sync and multimedia content)?
Obviously updates will not work.
Best Regards
Mousexx74 said:
Great answer..
thank you so much...
I will flash my Omnia as soon as possible because chewron labs token are expired. :fingers-crossed:
Another question if you know the answer...
After flashing my omnia with custom rom, does syncronization with zune still works or no (file sync and multimedia content)?
Obviously updates will not work.
Best Regards
Click to expand...
Click to collapse
yep, it works.
Tigress said:
yep, it works.
Click to expand...
Click to collapse
works for me also, thank you XDA!
Attentive Phone
Hi, Mirolg Is it possible to add HTC Attentive Phone app into one of the next ROMs?
Hello everybody!
thanks in advance for any info that u share or offer here!
a few days ago i take a Samsung GT-I8350! it runs on windows mobile 7
my answer is simple
can I do anything to change its OS???
and another thing or another issue with bluetooth
the bluetooth when is activated shows that it is paired with other devices(android and symbian)
but it can't connect to transfer any file
what's that problem???
thanks anyway for any information
Hello, first thing you should do is install a custom ROM. Windows Phone doesn't allow for deep changes to the OS like Android but having a custom ROM will allow for minor changes.
Secondly, Bluetooth support on WP7 is poor. If you install a custom ROM then you'll be able to follow this guide which installs DFT's Bluetooth drivers and Nokia's Bluetooth app which will allow for better file transfer compatibility.