Database Users

Wlan setup problems...

Hi!
Im trying put my TyTN use WLAN on IE but i can't...
I go
Setting -> Connections -> My ISP -> Add a new modem connection -> Select a modem: there i can't find my wlan modem i have just
Bluetooth
Cellular Line
Cellular Line (GPRS, 3G)
Generic IrDA
Hayes Compatible on COM1:
so what i can do plz help me

ravenclaw said:
Hi!
Im trying put my TyTN use WLAN on IE but i can't...
I go
Setting -> Connections -> My ISP -> Add a new modem connection -> Select a modem: there i can't find my wlan modem i have just
Bluetooth
Cellular Line
Cellular Line (GPRS, 3G)
Generic IrDA
Hayes Compatible on COM1:
so what i can do plz help me
Click to expand...
Click to collapse
Mmmm... First turn on WLAN - one way is use the button below the On/Off hard button on the side of the case. This opens a screen that shows your connections. One of them looks like an aerial with waves coming from it. It should not have a cross on it. If it has, tap it to turn on Wireless mode.
Move within 10metres of your WLan Router.
Your device in a short time should automatically detect the WLAN and give you a pop up message. You will be offered the chance to connect to it and to enter any codes/keys for your LAN.
If you still have problems there is another little app. that might help so let me know.
Mike

mikechannon said:
Mmmm... First turn on WLAN - one way is use the button below the On/Off hard button on the side of the case. This opens a screen that shows your connections. One of them looks like an aerial with waves coming from it. It should not have a cross on it. If it has, tap it to turn on Wireless mode.
Move within 10metres of your WLan Router.
Your device in a short time should automatically detect the WLAN and give you a pop up message. You will be offered the chance to connect to it and to enter any codes/keys for your LAN.
If you still have problems there is another little app. that might help so let me know.
Mike
Click to expand...
Click to collapse
Hello Mike
i had the same problem. i got it working by resetting the network connection. but after i always got a naggin popup, telling me GPRS cannot dial with present settings.
Since it was late last night, i gave up on PIE and use Opera instead.
no problem there

aquasesh said:
Hello Mike
i had the same problem. i got it working by resetting the network connection. but after i always got a naggin popup, telling me GPRS cannot dial with present settings.
Since it was late last night, i gave up on PIE and use Opera instead.
no problem there
Click to expand...
Click to collapse
I assume of course you were wanting to use WLAN not GPRS.
If so you need to ensure GPRS is switched of, else it just keeps getting in before the WLAN has a chance to connect.
There is a recent thread called UMTS/GPRS and WLAN switching or something like that, that has a lot of discussion on how to do this. Presume Opera connected fine on WLAN.
From the sound of it though ravenclaw has not managed to get any connection on WLAN.
Mike

Hi! Yeah i have wlan box one meter away... and wlan is on and off (tried both)
And my clock is piece of **** it will behind? or goes foward... now here is time 20:25 - 7.12.2006 and phone says 6:24 8.12.2006

ravenclaw said:
Hi! Yeah i have wlan box one meter away... and wlan is on and off (tried both)
And my clock is piece of **** it will behind? or goes foward... now here is time 20:25 - 7.12.2006 and phone says 6:24 8.12.2006
Click to expand...
Click to collapse
I'm puzzled by your WLAN problem. I assume you get no pop-up saying WLAN detected?? You could try downloading the hitchhiker application and see if that helps. http://www.kasuei.com/hitchhiker/ remember you also need the .Netframework as well http://www.microsoft.com/downloads/...6b-356b-4a2c-857c-e62f50ae9a55&displaylang=en
As for the clock, I'm sure I saw a post (and a solution) somewhere on this forum not so long ago about this skipping time zones thing. Perhaps somebody remembers it and where it is??
Mike

ill try! but one stupid question how i can shutdown this machina? not pressing 5sec power button (cause it will disalbe changes... but like normal way? )

how i can reset this damm thing?!? ... doing it hard way...

Er..I think maybe you need to take a few steps back, then sit down and read the manual?
The on / off button is top right side, just a press will put device into standby (suspend) a long press turns the device completely off.
The reset button is the small hole at the bottom just to the right of the IR lens - poke it with the stylus to soft reset. As for hard reset - havent a clue, never had to do it.

yeah time thing solved
and phone reseted

Pie & Wifi

I have my tytn flashed thay Cingular's Rom and each time at the my house I use my wifi. Now the issue is that pie wants to dial out and not use the wifi. I am connected to the wifi. I have try everything I can think of.. If you know the answer please let me know. Thanks

Try this:
settings->connection settings tab->Network Cards
change "My network card connects to:"
Make value "The Internet"

also, I often have problems connecting to WiFi unless the following setting is used:
Settings->Connections->Wireless LAN->Power Mode-> and set to "Best Performance"

Well I tried that and it still keeps trying to dial out. I can connect to the wifi just fine, it just won't use it.

getastro said:
Well I tried that and it still keeps trying to dial out. I can connect to the wifi just fine, it just won't use it.
Click to expand...
Click to collapse
I had a similar problem ealier this week, did a soft reset and wifi working OK - maybe worth a try if not done already?

[HELP] WiFi isn't working / turning on!!

Xda-viewers,
yesterday i tried to put on my WiFi, but it didn't work anymore
I have my HD2 for about 1month, very happy with the phone,
and this is the first mayor malfunction
When i press WiFi ON in the comm-manager it shows it's loading,
and then nothing, doesn't go ON,
turned the phone off-on, soft reset.. nothing..
anyone else had this glitch?
hard reset or other solution?

It always worked, untill yesterday

If I were you I would go for a full backup with SPB, and then restore (maybe excluding everything regarding the wifi) after a hard reset

I would try doing hard reset.
However, I had the same problem with my old Fujitsu Siemens Pocket Loox N560 and they had to exchange mainboard.

Do you have it charging? I can't seem to connect to any Wifi networks when I have the phone plugged in. Once i disconnect it, it works fine.

If you are connecting it using USB, make sure WMDC / ActiveSync is set to allowing your phone wireless connections while connected to your PC!

???
phone is fully charged
not connected to PC or anything
not working, going to try some things
anyone goto suggestions except hard reset?
else i hard reset tommorow,
thankz

You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?

skr_xd said:
You mean you can't turn ON or NOT CONNECTING?
If its not connecting, did you try to delete the connection settings from advanced wireless settings and try reconnecting again?
Click to expand...
Click to collapse
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.

timodc said:
It's really not turning ON.
I press the Off-On button, I see it loading and then, nothing,
WiFi is still turned OFF.
Click to expand...
Click to collapse
I've got exactly the same problem - have only noticed it today.
If I go into wireless network config and select my network there and click connect, it takes ages before it says "connected" and then immediately changes to "not connected". I've obviously checked and rechecked my settings. It simply will not connect any more.

i also can't remember installing an update which would cause this probleme..

Connected to PC
When connected to PC, in the comm manager, the WLAN is dissabled, can't even push it, maybe something went wrong with disconnecting and this is the reason why my WiFi is not working - going on?
Anyone?

I'm not at home, so can't do anything with mine at the moment, but out of curiosity, did you use then Wifi N option in BsB Tweaks? That's the only thing Wifi related that I can think of touching recently.

Tried it
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset

timodc said:
Indeed, thought the same,
tried to put Wifi-N off, soft-reset, but no change
Almost at the edge of HARD-reset
Click to expand...
Click to collapse
I really hope it doesn't need a hard reset. I'm not gonna be happy if I have to do that AGAIN!
I'm gonna keep searching, in the hope of finding a solution.
Out of curiosity, do you ever use the Wifi router app?

WM-Wifirouter
I tried to use the Wlan-Router with Comm manager,
didn't work that well,
installed app I had on my P3600: WM-Wifirouter,
this worked like a charm,
Timo

I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on

Sensational johncmolyneux!!!
I had this problem too - it was doing my head in, but now seems like an obvious conflict. Thanks for finding the solution.
Now all I need to do is solve my BT Voice Commander problem (reported in many other threads) and the HD2 will have the same functionality as the Hermes it has replaced ;-)
Cheers,
Lordbowl

You still haven't hard reset?! I am doing hard reset every 6days because of mod/theme and other crap testing
Backups with resco/pim/office2007 entreprise on windows 7 beta do the trick to have phone working in 15 minuts.

johncmolyneux said:
I've solved my problem! Yay!!
I don't know if this will be of any help to you, but give it a try and see how you get on.
Basically, when using the in-built wifi router, it assigned the IP address 192.168.1.1 to the wireless adapter. This is fair enough, for a router, but obviously not for when you want to connect to a wifi network and get assigned an IP address automatically.
I had seen other people suggest that this may be the problem, so I'd already checked my IP settings for the wireless adapter, and they were set to automatic.
However, if you run the wifi router and then go to your IP settings, it says 192.168.1.1. Set it to automatic while the router is running.
This made my phone get a bit upset, and I ended up reseting it, but since then I've been able to connect to my home network again.
So...
1. Run and start the wifi router
2. Go to settings, Connections, Wifi, Wireless networks, Network Adapters (tab)
3. Select the network adapter (Broadcom 802.11 DHD Network Adapter)
4. Change to use a server-assigned IP address, instead of a specific one
5. Click OK
6. Reset the phone - don't close the wifi router app first.
7. When it starts up, go to the comm mananger and disable wifi.
You should now be able to start wifi and connect to your home network. (It may do it automatically if you don't do step 7 - I'm not sure).
Give it a try and let us know how you get on
Click to expand...
Click to collapse
-When I try to connect the WLAN-Router with the Comm Manager, it keeps on loading and nothing happens.
-When I try the WM-Wifi-Router app which I used on my P3600, it says not abble to connect WLAN
-All my settings are server-assigned-IP-address
Still not able to put on my WLAN,
Timo

[Q] GPRS connection doesn't work...

Hello everyone
I am a Chinese user. I hope you can understand my English...
Recently I have exchanged my phone with my father's Nexus S.
When I get my Omnia7 back I find that my phone cannot use GPRS connection but only WiFi...
I can turn on the data connection and the top of the display appears "E"
but no app can access data connection, I tried to turn on internet sharing but it displayed "There's no celluar data connection to share right now."
I have tried a lot of methods to fix it...
eg:
1.run Samsung Tools, check on ADC, then reboot, it doesn't work
2.run Network Profile, select Telekom.de ,then select CMCC(my mobile service provider) back , reboot, it doesn't work
3. call ##634#, *#9908# , select Suwon 2G Test Bed and save, reboot, it doesn't work.
4. call ##634#, *#9920# , it displayed all the internet settings, every line is correctly set.
5. add APN in celluar settings, reboot, and it doesn't work.
6. I called CMCC support and had my GPRS service reset, then reboot my phone, it doesn't work.
7. I tried other's SIM cards(GSM) but the same problem. I have no 3G SIM card so I don't know what will happen when I use 3G connection...
8. I put my SIM card into Nexus S, and turn on data connection, it seems that nothing is unusual... every app goes well with GPRS connection...
My Omnia 7 was very hot and in reboot loop several days ago. I put it outside the window to cool it down.
I wonder if GPRS module is burned when it comes hot and into reboot loop?

Try the Samsung network profile app, select some other provider, then yours. works for me. Might be worth a try

ballajalla said:
Try the Samsung network profile app, select some other provider, then yours. works for me. Might be worth a try
Click to expand...
Click to collapse
Thanks for your reply.
I've tried this but it doesn't work...
I think there may be some problems in GPRS module...
Thanks anyway...

WIFI Calling not working

I have a metropcs phone and an trying to et wifi calling to work. At work it works great. I registered my 911 adress and it connected perfect. It is when I am at home when I have the issue. Ihave a tp link arcer C9 router and a netgear dm200 dsl router. When I try to connect it gives me a REG99 unable to connect error?

photodude56 said:
I have a metropcs phone and an trying to et wifi calling to work. At work it works great. I registered my 911 adress and it connected perfect. It is when I am at home when I have the issue. Ihave a tp link arcer C9 router and a netgear dm200 dsl router. When I try to connect it gives me a REG99 unable to connect error?
Click to expand...
Click to collapse
Try to change airplane mode on or off and wifi calling toggle on and off... It connects for me
Also 2.5 ghz is more reliable than 5th for wifi calling atleast for me
Sent from my ZTE A2017U using Tapatalk

Can anyone tell me how to turn on WiFi Calling? I've searched the settings but simply cannot find it where it is supposed to be (or anywhere). Upgraded to 7.1, so it should be working, no?

I haven't had an issue with WFC using T-mobile, but I came across this particular thread that may or not help with your current problem.
https://support.t-mobile.com/thread/135374?
Check it read every post if necessary and hope you get it to work.
@decamargob
If you are using TMO or Metro , the option should be under Settings > More > Wi-Fi Calling.

@DrakenFX that's where its supposed to be... Unfortunately it doesn't show up for me. I'm on 100% stock newest build. (I'm not great with messing around with stuff.) This is what I get.

decamargob said:
@DrakenFX that's where its supposed to be... Unfortunately it doesn't show up for me. I'm on 100% stock newest build. (I'm not great with messing around with stuff.) This is what I get.
Click to expand...
Click to collapse
Ok that's weird....
Do this,
1. Remove Sim
2. Reset Network Settings
3. Turn Off ,then insert sim card and turn-on the device
4. Head over setting and check if WFC is there
5. If not with sim card inserted , Reset Network Settings.
Long shot but ,hey anything is better than nothing

DrakenFX said:
Ok that's weird....
Do this,
1. Remove Sim
2. Reset Network Settings
3. Turn Off ,then insert sim card and turn-on the device
4. Head over setting and check if WFC is there
5. If not with sim card inserted , Reset Network Settings.
Long shot but ,hey anything is better than nothing
Click to expand...
Click to collapse
I guess sometimes the simplest approach is the best. That worked perfectly. Gotta repair all my Bluetooth devices lol, but awesome. Thanks for the help @DrakenFX!

Anyone having the same issue as I am? Sometimes Wi-Fi Calling works, sometimes it doesn't, it spontaneously starts working it spontaneously stops working!
Sent from my ZTE A2017U using Tapatalk