Related
Hey folks, I've read through all the JI6 OTA threads here and on the TMo forums and while I've seen a few people guess as to the cause of soft bricks, dosen't seem like anyone has nailed down the actual cause. I'm going to assume I'm not the only person out there with no access to a windows box to run ODIN so knowing what if anything can be done to prep my phone before accepting the OTA (that is sitting in my notification bar as we speak) would be immensely helpful.
So far the two best guesses I've seen are the existence of other update.zip files on SD and removal of bloatware, specifically Media Hub and possibly edited startup/shutdown screens.
Since I've got all these going on, I guess I'm staring down the barrel of a brick. But obviously one of these is easily rectified while the others, not so much.
Aside from those claiming bricks on vigin phones. Can we hear from those who have made mods to their rooted devices and either did or did not experience an OTA brick? I think this info will be helpful to many in sorting out what exactly is going on here.
I have black bar mod, I have naked swype, removed most t-mob app except media hub no change to start up or shut downtried to update. 50 % through it said update failed. Then rebooted fine. But I had an extra update.zip on my sd so maybe that's why. But no firmware now? Maybe I'm sol.
Sent from my SGH-T959 using XDA App
Mine wouldn't complete the update Rooted, most of the bloat removed, had an update on the sd. Was able to get into clockwork after the failed update and am performing a nandroid restore now.
this is great, thank you. beginning to look more like an issue with extra update.zip files than media hub. any successful OTA's with media hub removed prior to accepting the update?
Sent from my SGH-T959 using XDA App
I never uninstalled Media Hub. I have seen a correlation of about 5 people who had ROM manager installed and used that to install Recovery. Whether it be the installation of Recovery or a possible permissions issue with how it generates the update.zip that may have caused my issue.
just a question, why do people remove media hub? Does the application make the phone slow?
iynfynity said:
just a question, why do people remove media hub? Does the application make the phone slow?
Click to expand...
Click to collapse
Because up until now, it was a non-functional app. I didn't remove it, I use LauncherPro so I just removed it from my drawer. I'm still not touching this update. I got my Vibrant used so I would be out of luck if it jacked my phone up and I hate using ODIN. Too much hassle when my phone runs great on Bionix 1.4 as it is.
Wife's phone was toasted by OTA. Stuck at Vibrant screen. Rooted, unlocked, she did have an update.zip, if that turns out to be the culprit. Also had some apps removed, replacement startup animations, and removed shutdown junk.
She was set for always-on WiFi, too.
My rooted Vibrant soft bricked yesterday and I had to flash stock with Odin. I had the (what seems to be infamous) update.zip, removed Kindle, Mobi TV, Avatar Icon, Gogo. I had RyanZAOneClickLagFixV1+ installed but removed it. I also had the EXT2 Tools installed. @ the time of the update I was @ work and had a full charge on the phone. I flashed back to stock last night after work, and I haven't recieved the update notificaiton again...maybe TMo crossed me off some type of "update list"?
There are also different possible symptoms.
In my case the update appeared to have completed its cycle, except the tail end of the download of the new update wnt really fast then the system rebooted. System came back up into the Black Vibrant screen. I could start 'adb logcat' and the system had SurfaceFlinger repeatedly crashing.
Attempts in Recovery Mode after this to reinstall files didn't resolve the issue, reboots would still lead to a crashing SurfaceFlinger.
2 separate users in a thread, 1 had removed Boot Animations + Sounds, I only had removed Sounds.
Quite a few people had Stock Roms + Root, but some with Root didn't have any issues. Only correlation was with Titanium + Rom Manager, which a lot of people would have installed since it's listed in the Tips and Tricks thread. Titanium shouldn't do anything to the system unless you generate a backup Update.zip or install LZO support busybox.
One guess is that ROM Manager and Titanium can create a update.zip file that doesn't have the proper permissions. An OTA update that attempts to overwrite this file may get confused. Simply removing the file in advance may alleviate this issue. Another issue is ROM Manager installs ROM Recovery, which may change how the OTA perceives the phone.
Bionix 1.4...
I was running Bionix 1.4 KK OC/UV yesterday morning... Was a little dumbfounded when I received the update message from Tmo. Figured it wouldn't show w/ modded handset. Delayed install until I could read everything on here about it. Tried installing over Bionix last night just to see, and had no joy. I had removed all crapware, mediahub included. Hit 50%, said flash failed, rebooted and was back to my homescreen in no time. No ill effects to phone except being denied upgrade.
So I Odined back to Stock JFD FW (and wiped device for S&G), rooted, and updated from JI6 tar posted. Flashed perfectly, no ill effects as I've noticed. Reception is improved (for me anyway), and GPS functions similar to Bionix... No real incentive for update, but was curious.
I see Bionix 1.7 updated so it was all for nothing.
Now to play with other stuff...
Cheers
My girl friends phone bricked the other night from the OTA, it's rooted(update.zip) and has the bloatware uninstalled, nothing else like lagfix/roms on it etc.
T-Moible is sending her a replacement phone, which im pretty surprised about. Now since we have to send the old phone back so they can check for damage or anything that would void the warrenty.
We get to keep the external SD card(Avatar), now im sure there is a pretty good chance they will find that its been rooted. So we would have to pay $400 they said if its voided.
Now I can't get this phone to boot into download mode or even mount it, so what should I do? I know about ODIN but have never used it, can it mount the phone?
I got the soft brick and had to flash back to stock via Odin and then I flashed the JI6 tar file from the forum. All is working fine now.
I had root but no update.zip file on the sdcard root, had removed startup an shutdown sounds, had used both ROM Manager and Titanium (with LZO compression turned on), and had removed bloatware including the non-functioning Media Hub.
Next time I'll flash back to stock before doing an OTA update.
I am rooted have Titanium backup, ROM Manager, and clockwork mod. I also had an update.zip but I think it was from OCLF not from another source. My update went fine and I'm running without any problems on the new update.
PepeLasNoches said:
My girl friends phone bricked the other night from the OTA, it's rooted(update.zip) and has the bloatware uninstalled, nothing else like lagfix/roms on it etc.
T-Moible is sending her a replacement phone, which im pretty surprised about. Now since we have to send the old phone back so they can check for damage or anything that would void the warrenty.
We get to keep the external SD card(Avatar), now im sure there is a pretty good chance they will find that its been rooted. So we would have to pay $400 they said if its voided.
Now I can't get this phone to boot into download mode or even mount it, so what should I do? I know about ODIN but have never used it, can it mount the phone?
Click to expand...
Click to collapse
Woo, got it unbricked! finally got into download mode and ODIN saved the day.
this video was helpful for me: http://www.youtube.com/watch?v=AnY7P14JSWQ
^ODIN walkthrough
paxton said:
I'm going to assume I'm not the only person out there with no access to a windows box to run ODIN
Click to expand...
Click to collapse
there is a cross platform tool being developed called 'Heimdall'. It is currently a command line tool and is in beta. however people are successfully flashing their phones using it. It is obviously not a 'one click' solution, so you will have to go find the proper files and type out the command.
It can be found here http://forum.xda-developers.com/showthread.php?t=755265#
If you are the type of person with access to both a windows machine and a linux machine, I suggest you check this out. Testers are needed. Of course you can test if you don't have windows, but it's nice to have Odin as a back up. ;-) just incase....
-p
I had a failed update twice using Odin. It wasn't until I went back to stock T959JFD for the second time and deleted update.zip and all clockwork back ups that it finally worked. Runs perfect with no issues.
Sent from my SGH-T959 using XDA App
Was rooted with OCLF, Captive camera, gps fix, rom manager, titanium backup and add removal. Removed the OCLF and unrooted, ran the update, looked like it got to 100% (not sure cause I looked away and then back at it right before reboot) but said update failed. Got stuck at the vibrant screen blah blah. I'm pretty sure I had an update.zip on the sd, but not 100% on that. After pushing the update with ODIN I have noticed my phone lagging quite a bit.... Thoughts?
Sent from my Rooted Samsung Vibrant using XDA App
I just had my phone rooted on tuesday by a friend. It started turning itself off for the first few hours and went back to normal for a day. Last night it started turning itself on and off every minute. I know nothing about phones, can anyone help me?
How did your friend root?
Did they delete system apps?
Did they apply lag fixes?
Perhaps just flash a custom rom. Their better than stock and should fix your issue. I hope they didn't do a lag fix. Disable it if they did.
He did something like holding the power button/volume up/down to get into download mode? That's all i know. He said he didn't remove any of the system apps, or change anything. He added a wifi-tethering for me, that's why he rooted it. I know nothing about phones and computers. I'm out of town for another week so i can't have him fix it, but i need to do something so i can use my phone. Any suggestions?
oh ya, he used ODIN if i remember right
I don't know why he would be using Odin if all he was doing was rooting the phone. Can you get to the web to DL anything? I would try flashing something with clockwork till you can re-flash to stock with Odin. You need to find out what exactly your friend did when he worked on your phone.
Can you adb? I would like to see the log.
Sent from my Bionixed SGH-T959 using XDA App
my phone wont stay on long enough to do anything. When i push the power/up/down buttons at the same time i get a picture of a droid and it says power reset or unknown upload mode
whats adb? I'm a preschooler when it comes to anything computer/phone related
I was getting panic mode/upload when I was messing with eugenes kernals.
intruda119 said:
I was getting panic mode/upload when I was messing with eugenes kernals.
Click to expand...
Click to collapse
As was I, and that's the only time I've seen that screen.
OP, you're friend definitely did more than simply root your phone. Especially if you say he used Odin? There's no reason to use Odin to gain root.
I would recommend you Odin back to stock and start fresh.
is there any way i can do it without Odin? I'm out of town for a week and need my phone
Rom manager / clockworkmod. Just go to the app store (it's free) and download it. Flash the recovery and flash back to stock 2.1 eclair. It should fix it then when you get home just use the one click root method to root your phone. Check the vibrant bible in android dev. to do it, it's really easy to do yourself since it is literally, one click ^_^ Also for the rom of 2.1 I also recommend going to the vibrant bible for that as well. All you have to do is dl rom manager, put the 2.1 rom on the root of your sd (not external sd) then go into rom manager and install custom rom (pick the stock 2.1). It will wipe your data but your phone should be fixed and you can always dl back your apps and import contacts through your gmail account. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=740077
that's eugene's stock 2.1 for vibrant flashable through clockworkmod ^_^
Hello all,
Been rambling around the forums in ninja mode trying to gain enough knowledge to not mess up my phone before trying to mod it but alas best laid plans....
Anyhoo I was working to put the Froyo leak on my phone and everything was good till I did a cwm wipe of the phone and wammo it had problems. I managed to use Odin to get it back to barebones stock, lost my high score in Angry Birds too dang it.
Now that I am back to this point I tried to run the Verizin updates and it downloads and goes into install mode on reboot and it dies at Updating Modem section. At that point I saw I was rooted so I removed that and tried again, no dice amigo. Did a factory wipe, nothing. Cleared the cache, fail again.
If it helps its trying to do a dh12 to di01 update. Got any ideas?
When you went to stock did you flash the stock kernel and stock recovery as well? I had to do this when I updated to dl09
Good question and yes I believe I did, I followed this: http://forum.xda-developers.com/showthread.php?t=782204&highlight=return+stock thread to get the job done. Let me try it one more time.
Also I load the PIT file with each md5 correct?
Looks like I fixed it on the second time around. Not sure what I missed but the update went through. No worries. Might pay someone to hand hold my through getting DL30 on my phone cause even as an IT guy I'm missing something every time.
Strong thing is, once the DI01 update happens it actually doesn't find any other updates...wifi is off.
VZW pulled the DL09 update due to the e911 bug until it is fixed
Makes good sense. Sooo anyone wanna tutorialize me on how to de-crappify my phone? Its worth a donation from me.
You're on di01 right?
I would odin the dl09 package, then use cwm to flash super clean 2.2. Clean, debloated froyo goodness
Sent from my SCH-I500 using XDA App
Sounds good. The problem lies in me somehow fudging up the process at some point and having to set my phone back to stock again.
Where did you see this?
"VZW pulled the DL09 update due to the e911 bug until it is fixed"
Have any sources on this one? I really would like to see them.
Not doubting you, I have just been rebooting and *228 for 3 days trying to get this update only to see this quote...
VZW sent a message to all Fascinate owners the other night acknowledging the bug and a fix being in the works. Why would they continue to push it out after that?
Sent from my SCH-I500 using XDA App
Well...
0123456789
New EA update is being pushed out.
Verizon told me to go to a store as some phones will not accept OTA updates. Seems stupid and like a lie, but whatever...
Atst44 said:
"VZW pulled the DL09 update due to the e911 bug until it is fixed"
Have any sources on this one? I really would like to see them.
Not doubting you, I have just been rebooting and *228 for 3 days trying to get this update only to see this quote...
Click to expand...
Click to collapse
He's right. Google the source if you need it. Please don't take this response as me being snarky, I don't mean it that way.
I think the biggest issue people are having is not being careful and following the directions perfectly.
I was new two days ago and did this with only one hiccup.
1. I followed the Beginner's thread in this forum to get me rooted. First pass with Odin failed as the one click code didn't recognize the phone. 2nd pas worked. Trick was to just turn on USB debugging and plug in phone, do not then click the mount notification. Leave that off as USB debugging was all that was needed.
2. I installed Mod Manager and Titanium backup right after. This was part of the main directions and Titanium (though not mentioned) allowed me to save all my specific apps that had important data, like my 100% completed Angry Birds.
3. I then followed the directions in the developer forum for the How To.. install DL30 for Froyo. This scared me at first because the CW recovery stalled when wiping data. I waited over 30 minutes before getting the courage to pull the battery and start over. Figured its only deleting user data, should be ok. It was and then it worked the 2nd time without fail. I did reboot in normal recovery, but running the update.zip put it back into CW.
4. After that, I rebooted numerous times, checked all stock apps, upgraded firmware in camera, and used Titanium to add back my apps I bought or downloaded as well as restored my bookmarks and memo notes.
In the end I've had no bugs/issues as others have reported. Only functionality not tested is bluetooth as I don't use it for anything.
I hope this helps and if you are walking through it all again, I would be glad to help specific questions based on my experience.
I was DL09 stock OTA at first. I'd recommend getting rooted and using Odin to get the stock DL09 from these forums flashed before you try to put DL30 on. As a developer myself, it just makes sense to always put on builds that are in order of each other. So DI01, then DL09, then DL30.
0123456789
superchunkwii, thanks for the feedback. When I booted into cwm recovery mode it hung too. I think my fatal mistake was I booted in regular recovery mode and did my wipe....sad. I should have just rebooted and went back in cwm like you did.
As far as freezing apps I did not know freezing angry birds would save its data. Boy was my wife is mad (she plays it the most).
I did everything else on cue so I will try again and see how she goes. IT CAN BE TAUGHT! As the genie says.
On another note I did download the EA28 update today, can I install the DL30 Rom or do I need to "downgrade" to DL09 to get this done? Anyone try?
dlmcclou said:
superchunkwii, thanks for the feedback. When I booted into cwm recovery mode it hung too. I think my fatal mistake was I booted in regular recovery mode and did my wipe....sad. I should have just rebooted and went back in cwm like you did.
As far as freezing apps I did not know freezing angry birds would save its data. Boy was my wife is mad (she plays it the most).
I did everything else on cue so I will try again and see how she goes. IT CAN BE TAUGHT! As the genie says.
On another note I did download the EA28 update today, can I install the DL30 Rom or do I need to "downgrade" to DL09 to get this done? Anyone try?
Click to expand...
Click to collapse
1. Not freeze.. that makes it so app won't run. Backup with Titanium Backup is what you need I think.
2. What is EA28? I don't think the fascinate has had that build.
Just got an update EA28 any ideas what it does
Sent from my SCH-I500 using XDA App
EA28 build is the update to fix the emrgency dialing bug in DL09. As I understand, it is otherwise the same as DL09. I am by no means an expert though.
EA28 build is the update to fix the emrgency dialing bug in DL09. As I understand, it is otherwise the same as DL09. I am by no means an expert though.
Click to expand...
Click to collapse
Cool. Can anyone confirm this?
I apologize in advance if this has been covered elsewhere, I could not find help
upgraded to DL30 from DJ05 modem, had message on my phone that modem crashed. Now I have Blue circle on my phone. Cannot get 3G signal, make phone calls or even dial *228. Says I need to disable airplane mode or but I don't have airplane mode enabled. Tried Flashing DJ05 modem, when the green letters say choose zip from card,
--Installing:SDCARD:update.zip
Finding update package...
E:/Can't mount SDCARD:update.zip
Installation aborted.
any ideas
Try wiping dalvic cache in cwm and cache And rebooting
Reboot may take a little longer than normal. Not sure this will fix it but it's worth a try. Seems something like this happend to me awhile back and I think this solved it
Also u can't flash a modem in clockwork. odin only as far as I know.
Sent from my SCH-I500 using XDA App
What process did you use to update? I think you're a little confused... DL30 doesn't have a corresponding modem, so you have to use either the DJ05, DL09, or new EA28 (which I don't think anyone has pulled for flashing yet). If you tried to flash something with Odin, you need to reflash one of those (DJ05 or DL09) modems using the PDA button *not PHONE*
This exact thing happened to me yesterday. I figured since I am not on verizon something happened with the prl and checked my phone and all info in about phone was gone. What I did was risky, I restored a back up of dj05...and while it was frozen at the samsung part, pulled the battery and restored my dl30 back up. Worked fine. I know your pain though, frustrating.
Edit: also make sure both airplane modes are off. There's one when holding down the power button and another in settings.
Kevin Gossett said:
What process did you use to update? I think you're a little confused... DL30 doesn't have a corresponding modem, so you have to use either the DJ05, DL09, or new EA28 (which I don't think anyone has pulled for flashing yet). If you tried to flash something with Odin, you need to reflash one of those (DJ05 or DL09) modems using the PDA button *not PHONE*
Click to expand...
Click to collapse
Cant dump a modem if you don't know where it is. And the modems they include with the OTAs are partial modems. Not the full thing.
Sent from my SCH-I500 using XDA App
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
What are you running? It may be a permissions problem. Have you tried uninstalling it and reinstalling it?
I'm having a similar issue. Help!
jpolzner said:
Hey folks, I'm hoping one of you can help me out with an issue that just cropped up on my phone. I've been running EB01 since it's release and have had no issues whatsoever except for today when I noticed my apps (Titananium Backup, Tapatalk, Root Explorer) we're remembering preferences anymore and/or every time I exit from them and launch again....it thinks it's the first run again.
Did something hose up my permissions/ownerships? Only think I did recently was flash the de-binged browser via CWM.
Any ideas??
Click to expand...
Click to collapse
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
I'm thinking it has something to do with flashing either the De-Binged browser or the new market update. Maybe something in the framework-res is getting hosed up?
I just did a wipe and reflashed plain old EB01 and I'm not going to flash any changes and see if the problem comes up again.
emortio said:
I was just about to start a thread about this. I'm having the same problem. I upgraded from blackhole 4.1 (DL30) to Superclean 2.2 EB01 with voodoo lagfix. I got the red CWM flashed via odin and proceeded to install the EB01 modem and the superclean 2.2v (EB01).
The first time I flashed was a disaster, there were issues with Odin completing the flash, so I had to do USB pulls about 4 times (which ended up giving me full "light blue" screens during download mode at times).
After getting Odin to cooperate, I was able to flash the Superclean 2.2v (EB01), and then I restored everything from Titanium Backup, which worked fine until I restarted the phone or left it alone for a couple of hours. Everything would force close (like ADWLauncer Ex, forcing me to use ONLY TWLauncher) and all my preferences were lost. Like gmail would have to resync as if it were new, all the EULA dialogs would come up (like in android market), my trillian profiles were all lost, if i turned off haptic feedback that would turn back on, my ringtones would go back to the defaults, etc.
So I read some other thread in the Development section which said to reflash, and do not do any restores at all. So I reflashed with Super clean 2.3v (EB01), but it happened again, all my preferences would be lost. I also tried to do "fix permissions" from RED CWM, but it just ran for like a fraction of a second and didn't seem like it did anything, as the problem persisted.
I'm planning to go back to DL30 or even DL09 to see if my phone functioned properly or not.
If anyone has a solution to this problem please help!
- Superclean 2.3v (EB01)
Click to expand...
Click to collapse
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
brettdacosta said:
I'm having the exact same problem. I've been all the way down to DJ05 to see what happens, and when I come back to superclean 2.2 voodoo-ed, I get force closes on everything the first time I restart - that issue was due to the new feature froyo added "automatic restore" in settings > privacy. I got that taken care of by uninstalling all apps.
However, when I restart now, my entire phone defaults back to cleared data. I'm talking every setting that I could think of (usb debugging, sound, brightness, contacts, security pin cleared). I don't get it at all. Everything else has been working right though.
Just thought I would share - I'm kinda still in limbo till I figure out what I should do.
Click to expand...
Click to collapse
I wonder if it has to do with the type of EB01 we're using or the CWM. I flashed CWM red via Odin, rather than updating via Rom Manager or update.zip. Also I used the EB01 Walkthrough in the fascinate developers section, the link is:
http://forum.xda-developers.com/showthread.php?t=948722
***UPDATE***
I resolved the problem... I think. I noticed there was a difference in the file names of the EB01 Modem in the walkthrough link I provided on the last line of the paragraph above and the EB01 Modem given in the original EB01 stock thread (http://forum.xda-developers.com/showthread.php?t=948679). I flashed with the eb01a_modem.tar given in the stock thread and then upgraded to Super Clean with Voodoo (v. 2.4 as of this writing). The market DID restore all the apps, before I was able to stop it, but after I restarted, there were no force closes nor were there any loss of preferences. I hope the modem issue was what was wrong...
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
I think it's a dbdata partition issue. I can't say how to fix because it's above my paygrade, but you may have to wait until it is officially released.
jpolzner said:
Started doing it again this morning. This time I did not flash any mode via ROM Manager. Only things I did was de-bloat using Root Explorer and Titanium Backup.
Not every app started forgetting preferences, some still reemebered. Any of the devs have an idea of what's going on here? I'm running the plain old, fully-bloated EB01 ROM. No voodoo, no de-odexed, or anything like that.
Click to expand...
Click to collapse
Try the Odin back to stock...DI01, wipe everything. Reroot and and get cwm. Then ODIN EB01 Modem Tar followed by super clean 2.4 install through cwm. Be sure to wipe data and cache before flashing super clean.
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
jpolzner said:
I there a reason I have to go all the way back to DI01, or can I use any All-In-One Odin package that writes the ROM, Kernel, & Radio?
Click to expand...
Click to collapse
I suggest that typically before anything else b/c it seems to help most. I've never experienced these issues but many suggest this is a viable method to remedy certain problems. Don't see why you couldn't try the odin DL09 all-in-one and wipe the hell out of it and try again. Good Luck.
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
jpolzner said:
Is the corruption in the dbdata partition caused by an older version of CWM or a problem in the EB01 ROM itself?
Is it safe to go back to EB01?
Click to expand...
Click to collapse
I believe it's currently inconclusive. There is speculation about exactly what causes it hence the reason I suggest wiping everything and then flashing the most recently provided stuff. That way it'll narrow things down. Someone can correct me, but if you odin back to stock, I'm 99% sure super cleans 2.4 voodoo kernel includes the new cmw. I was on green cmw unitl I flashed the seperate voodoo kernel posted by jt. I haven't had any issues.
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
I've never run Voodoo on my phone, but I did my initial install of EB01 with one of the older "Green" CWM versions.
adrynalyne said:
Its almost certainly dbdata corruption. The cause is...yeah questionable. Seems most common with voodoo with the current hack being used to get it working with froyo.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
jpolzner said:
Any other suggestions or fixes?
I went all the way back to DI01, then flashed to EB01 using an Odin All-In-One and now 48-72 hours later, my apps (most notably Tapatalk, Root Explorer, and Titanium Backup) think it's the first time they've run every time I launch it.
Shouldn't have going back to DI01 fixed the corruption since it reformats the ROM partition? Also, something I notice was that flashing to DI01 or EB01 using odin did not get rid of the new CWM Recovery.
Would running the permission fix correct the issue?
Click to expand...
Click to collapse
No...are you running voodoo? And what rom are you using?
EB01 Fully Bloated, Non-Voodoo Kernel
Baseband version: S:i500.04.V.EB01
Kernel version: 2.6.32.9
Build number: SCH-I500.EB01
http://forum.androidcentral.com/ver...roms-w-root-new-clockwork-updated-2-15-a.html
Try This...
This will hopefully repartition and clean dbdata corruption. BTW, I couldn't get 2.2 to run on my phone until I odin flashed a ROM which allowed me to then flash Adrynalyne's 2.4.
DI01, DJ05, DL09 did not work for the fix. Eclair worked fine, but Froyo would not work until I flashed a 2.2 odin.
Do I need to check the "Re-Partition" option in Odin when flashing or does it do it automatically?