Related
Hey guys, got a huge problem, I rooted my HTC Magic, it was working and all, but now (I'm using Fatality HERO) it doesn't startup, it gets stuck on the HERO screen. Even worse is my phone turned itself off after saying SD Card corrupted.... and now when I cm recovery, it doesn't recongise the damn SD card, I've tried the reset thing by holding home and back, I'm totally lost. HELP!
aneesh99 said:
Hey guys, got a huge problem, I rooted my HTC Magic, it was working and all, but now (I'm using Fatality HERO) it doesn't startup, it gets stuck on the HERO screen. Even worse is my phone turned itself off after saying SD Card corrupted.... and now when I cm recovery, it doesn't recongise the damn SD card, I've tried the reset thing by holding home and back, I'm totally lost. HELP!
Click to expand...
Click to collapse
32a or 32b?
32B, although I seemed to have fixed it. I dug out the original 2GB MicroSD, put another Fatality ROM on it, and reflashed the ROM on, works now I'm wondering what to do with my 8GB mSD card though. Should I pop it back into my HTC a reformat it? Or will it kill the phone again?
aneesh99 said:
32B, although I seemed to have fixed it. I dug out the original 2GB MicroSD, put another Fatality ROM on it, and reflashed the ROM on, works now I'm wondering what to do with my 8GB mSD card though. Should I pop it back into my HTC a reformat it? Or will it kill the phone again?
Click to expand...
Click to collapse
I just use this thing.
http://www.sdcard.org/consumers/formatter/
Or the built in one in the RAv1.2.1 recovery rom.
Haha fixed that too Lolz!
ok so rather than realize that the sd card was the problem, you rebooted and wiped your phone. the first step you should have taken was to reformat the sd card. when you use the sd card to run apps there is a higher chance of corruption.
Nah, it said the SD was corrupt, wouldn't let me format, then my phone ran out of battery, which was Then my problem started because obv. it doesn't mount the SD card, and my backup image is on there. When I booted up, it got stuck on the HERO screen... blah blah..... Well, it's working now, although, now with a formatted SD, I don't have a backup of my original ROM, which is lame. I was lucky to have a spare SD, or I would have been done for!
MOD EDIT
Thread moved to general discussion as not rom related
The Fatal1ty ROM has a problem with SD cards, every time you mount via USB and then unmount, it tells you the card has corrupted. After you reboot your phone it comes back though. I would use one of the other Hero ROMs instead.
ur ans
aneesh99 said:
Hey guys, got a huge problem, I rooted my HTC Magic, it was working and all, but now (I'm using Fatality HERO) it doesn't startup, it gets stuck on the HERO screen. Even worse is my phone turned itself off after saying SD Card corrupted.... and now when I cm recovery, it doesn't recongise the damn SD card, I've tried the reset thing by holding home and back, I'm totally lost. HELP!
Click to expand...
Click to collapse
my friend boot to recovery mode use recovery-rav1.2.1h.img
and then format the card in to fat32+ext2+something it is
then put card in card reader put the rom u want >> in to sd n rename it to
update.zip
then insert the memory card n to phone
fastboot from pc top recovery again
then wait fopr 2mins to make recovery recg. ur card
then do 2 second option i think update using update.zip
it will do it work then reboot it
tadaaaa u get the os back
enjoyyyyyyyyy!!!!!!!!!
hmmm
almost every 2 days i have to format my sd card, it keeps getting corrupt :/ i am using fatal1tys hero rom, but i cant update another rom because i always get an error message when i try to load a rom, i have a 32b mytouch
okai, so, heres the long and short of it. WP7 on NAND, Hspl3'd, 2.15 radio and a range of SD Cards, the one I'm using currently is a 16gb Kingston Class 4 but the problem also appears on the standard HTC card that came with the phone and a 4gb Sandisk Class 4 (This leading me to believe it isn't and SD problem).
The phone flashes all correctly and boots back into MAGLDR, i then reset MAGLDR (just in case, ya know) and go to boot WP7.
Heres where my confusion kicks in. Sometimes, it boots first time, it goes through booting fine. other times, i get 5 seconds into the DFT logo bootscreen and it crashes, re-booting the phone. And most of all, i get 1 2 3 4 5 6 GO GO GO! and it crashes and re-boots the phone *sigh*
this persists over multiple OS and MAGLDR 1.12 flashes and seems to all be dependent on time. If the phone crashes once (fails to boot) it wont boot again at all for the next 10-30 minutes, then, if sufficient time is passed, it will boot without issue. And yeah, i don't think its heat related, the phone stays fairly cool throughout the process (I've had my phone get hotter on an underclocked android build )
Any ideas? i apologise if this has been addressed elsewhere, but ive kept my ear to the ground in this forum for a few days and have done a few searches, as far as i know, this is a new and confusing issue :L thanks in advance.
Hey mate... Weird case... Did you tried to Wipe the phone to Factory settings? (I mean uninstall hspl,android magdlr e.tc???) Try it and post here with your results... Just make an installation of the Winmo 6.5 only!
Give it a shot now, just to be sure, flashing a standard Winmo rom wipes my HSPL don't it?
have you tried formatting the sd card with panasonic sd formatter...if not i think its worth a shot...make sure to set in options to full (erase on)...hope that helps
smokinmacgun said:
Give it a shot now, just to be sure, flashing a standard Winmo rom wipes my HSPL don't it?
Click to expand...
Click to collapse
No.. you can still have the HSPL and stuff! Somewhere here i saw a topic about Uninstalling all these together!
In addition try the comment above mine and post your results!
If it's not the problem then try Mgdlr 1.11 with Android build... Most probably something went wrong with the installation!
igrind2 said:
have you tried formatting the sd card with panasonic sd formatter...if not i think its worth a shot...make sure to set in options to full (erase on)...hope that helps
Click to expand...
Click to collapse
I use the sd formatter from SDcard.org, but yeah, full erase has been a button ive pushed somewhere along the line, alas to no avail
The problem is WP7 specific, I've never really had much trouble with Android builds on Nand
Wp7 boot problems are related to your SD card then! Wp7 is known to have these problems on several SD cards... I use Chinese cards (not branded) and are working just fine... i have 8gb class 4 and 16gb class 6.. LOL!
Its what i thought at first, but seriously, 3 different brands of card all crapping out? Kingston and sandisk cards work for others on top of that, but i think now you guys have given me enough to get on with, i edit OP if i ever get it working :L thanks a bunch for the advice
Ok guys this is really frustrating. I have Android ROM and I want to try WP7 ROM. But every-time I install any ROM I am either stuck on GO GO GO or afterwards I am stuck on white screen with green HTC logo in the middle. I performed task29 before installing anything. I suspect on my SD-Card( I have Kingston 4 GB Class 2), so I borrow another one-Transcend 8 GB Class 6. And again the same problem, WP7 is is stuck on GO GO GO or white screen with HTC logo. What can be the possible explanation here? Anyone?
TnX
it could be a number of things, ive found the best way is to start again. SD flash an original wm6 stock ROM, then install hspl 2.08 > radio 2.15 > magldr 1.13 > os
take you SD card and download SDformatter, format it again
try again.
note that both your cards may not work and if you search you will find all of this info
Tnx mate, but I do the procedure 4 times without success. I still suspect that the problem is with the SD-Cards. Today hopefully I will try with SanDisk 16 Gb class 6. From what I read SanDisk is most used. And if this failed, I will flash stock WinMo 6.5 and reinstall everything again.
TNx
Sent from my HTC HD2 using XDA App
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
dont do the task29
SD flash WM6.5, HSPL, radio, magldr, flash OS
oh i wouldnt go with a class 6, whilst some folk have had working ones many more havent got it working, class 2 or 4 is best, just because its a class 2 doesnt mean its slower than class 6, infact many folk, myself included believe the class 2 and 4 is quicker
Did exacly what u said.
WM6.5 --> HSPL --> radio --> magldr --> flash YukiXDA'a OS
htc logo stuck
As i said i have another hd2 which is running on wp7 for a week... ive done exacly same thing to the both of them and one is not working... Is there something else what i can do?
Ziaren said:
I have the same problem. Flashing complete in 100% but i can't pass the HTC logo when it's booting.
This is not SD fault because I have another device which is running fine...
Did task29, flashed winmo6.5, radio, hspl, magldr 1.13...
One phone simply can run wp7 and another can't ?
Click to expand...
Click to collapse
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Ok I forgot to replay that I did it . In my case there was no need for stock ROM. I just:
1. Did task29
2. Installed WinMo ROM (In my case Dutty's V25)
3. Install MAGLDR
4. Install Wp7 ROM...and it works
dazza9075 said:
Hmm, so your saying thatyou have access to 2 HD2s, running/trying to run WP7 and that one of them works with the SD card but the other doesnt work with it?
Click to expand...
Click to collapse
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Ziaren, Do you have 2 SD cards with your 2 HD2s?
Have you tried with both sd cards on your HD2 that has this trouble?
Just a thought.
Good luck
Ziaren said:
Yep. Im doing EXACLY same thing to the 2 devices. Using the same SD card. First phone is booting and working second is not.
Tried about 5 times (to both of 'em to be sure). I have enough. This just can’t be done. Don’t know why. Maybe there is something wrong with memory? IDK... but this is extremely frustrating.
Click to expand...
Click to collapse
Have you tried to flash your stock ROM, then to re-flash everything? (HSPL, WinMo, MAGLDR and WP7)
Yellow XDA!
I've got this thing when trying to get a new Sense 3.0 rom. I've been looking for a good one and found that one. (Please point me to your favorite sense 3.0 ROM)
When installing, I've had some trouble with partitioning SDCard, installing a ROM (status 0 error, aborting installation)
I'm using 2.08 HSPL, MagLDR 1.13, CWM v4 & Radio 2.15.50.XX
I'm able to install a ROM (tried http://forum.xda-developers.com/showthread.php?t=733649)
But when I reboot after installing (in CWM), when it should load, it doesn't go past the Android loading screen
So It boots, MagLDR shows up, no errors, gogogo thingy, then it freezes (splash screen I guess)
I've been looking for some solutions but haven't found anything that works.
Tried other radios, CWM versions, ROMs...
I've got no idea what to do
Any help is appreciated.
Syntax1993
Tmous or regular? If regular, do you have the 1gb ext partition set? Also, that rom will take a while to set up since it requires a lot of stuff to be unpacked onto the SD card.
I've not used that rom but I know some of the big ones take tens of minutes for first boot
samsamuel said:
Tmous or regular? If regular, do you have the 1gb ext partition set? Also, that rom will take a while to set up since it requires a lot of stuff to be unpacked onto the SD card.
I've not used that rom but I know some of the big ones take tens of minutes for first boot
Click to expand...
Click to collapse
I used the EU version. I did indeed (try to) partition the SDCard but when clicking advanced, partition, 1024, 0, It told me to wait, and wait, and wait, and wait, and when after like half an hour, I pulled out the SDCard, it's 1GB smaller in Windows so it should be done.
Installing works fine.
I'll try starting the ROM again & look if it works after a couple of hours.
Doesn't work. It ran all night, didn't get past the Android screen.
I ran into a similar problem. I downloaded a file from the forum called Wipe_it_CWR.zip before installing the new rom and that resolved my issue
You mean just installing it via CWM before the ROM right? Nothing else special?
Trying it now. So far, it seems like it won't work.
EDIT: Nope sorry. It's really weird.
Whatever WP7 ROM I try, my phone just hangs on the splash screen. It used to be fine a while ago until I tried flashing langs wp7.5 ROM...
can anyone please help?!
i'm not saying it's the exact issue, but what class is your SD card? Mine also did the same except when i tried flashing back to WP7 from Android and it killed the SD card completely.
James Harrison said:
Whatever WP7 ROM I try, my phone just hangs on the splash screen. It used to be fine a while ago until I tried flashing langs wp7.5 ROM...
can anyone please help?!
Click to expand...
Click to collapse
there was an error when flashing it. You should do all the steps over.
iKilla said:
there was an error when flashing it. You should do all the steps over.
Click to expand...
Click to collapse
I've done it over and over. Even went out and bought a new 4gb class 4 sd card to test. Same result. This really makes no sense!!
try flashing the rom withOUT your sd in ... yet brand new or not WP just doesnt work with some cards regardless of class, brand, etc.
Solution
James Harrison said:
I've done it over and over. Even went out and bought a new 4gb class 4 sd card to test. Same result. This really makes no sense!!
Click to expand...
Click to collapse
What rom u using? yuki one or hd20 dft one? if yuki, i also encounter this freeze screen problem but dft one, worked smooth and stable, nvr see freeze screen anymore, try this if u are using yuki rom http://forum.xda-developers.com/showthread.php?t=953078
When I flashed Yuki BTTF ROM I had the same issue. Had to remove SD Card until final update. Without the SD Card, update to 7392, and then reinert the card. Hard reset phone from settings, and then update the rest of the way. By following this process, my updates worked perfectly.