Related
hi!
i need some help on warcarft 2 for my diamond. when i'm within the game, and i click somewhere, the cursor (the hand ) always seems to be about 50 pixels right to the actual position of the screen where i clicked in.
is there a possibility to "calibrate" the cursor? otherwise the game isn't playable 'cause i can't click the action icons (move, fight...).
thanks for your help a lot.
YEs i do have the same problem. It loads quite fast and looks great but its unplayable with this inacuraccy!!!
If you read the post about theese games it will say that you need to set the resolution ingame to 640*480 and check the fullscreen button. try that
thanks. that's it. must have missed that post. i'm sorry.
I tried the game, looked great, but i could not find how to "right" - click...
could one of you enlighten me?
thanks
COuld anyone give me some links as th where to get this game from? i used to have loads of games on my old phone but i got a new laptop and lost everything, Has anyone tried Age of Empires on my old PDA it was the best game i had.
Thanks guys
mightycaz said:
COuld anyone give me some links as th where to get this game from? i used to have loads of games on my old phone but i got a new laptop and lost everything, Has anyone tried Age of Empires on my old PDA it was the best game i had.
Thanks guys
Click to expand...
Click to collapse
Search the forums, there's a huge thread with a list of games like WC2, Doom, etc all with links :]
But yeah, WC2 isn't a brilliant port, though it is playable, make sure you disable TF3D if you're into serious gaming with it (35+ units) otherwise you'll get C2D
Hi guys
I come right to the point: has anybody found any good working snes emulators for the xperia? It is the perfect device to play on considering that u can put it in landscape mode and just use the keyboard. Unfortunately, none of the emus I ve tried seem to work - especially not in landscape mode.
is there something I have missed or is there none? are there any other good emulators for consoles u can recommend?
thx
im also searching. nothing good so far
I have pocketsnes up and running using the vga screen tweak
http://www.modaco.com/content/smartphone-software-games/237589/pocketsnes-1-53/
not working for me ... the version that u attached to your last post doesnt work on my phone .. whenever I click on load rom nothing happens .. it wont even go into the menue where I m supposed to load the rom from
but assuming that I get around this, what exactly is the vga tweak?!
Amanox said:
not working for me ... the version that u attached to your last post doesnt work on my phone .. whenever I click on load rom nothing happens .. it wont even go into the menue where I m supposed to load the rom from
Click to expand...
Click to collapse
I believe that in order to get the ROMs able to load, you need to have the PocketSNES.exe file in the same dir as the ROMs. It sucks for organized people, but this is the only way that I could get it to find the ROMs.
Performance still isn't the greatest, but if more ppl start to get WinMo devices, maybe we'll see a rewrite of these emulators since they're all from 2002-2003.
Hope that ROM loading info helps anyways!
pocketsnes 1.53 loads and looks well
BUT, same problem...
when I click Load ROM...
nothing happens.... I have the smc files in the same folder as the program and i've tried to do it with and without folders both in my documents and programs
too bad
The solution :
Google for
tgetfile
and install it.
It will work then
fotoingo said:
Google for
tgetfile
and install it.
It will work then
Click to expand...
Click to collapse
I had this problem too, this fix sorted it
However for snes emulation currently im using morphgear, its a bit slow for mega drive but Im currently playing Donkey Kong Country full screen at 100% speed with my keyboard try it you'l like it
I also use Morphgear and the SNES emulation is fast, pretty and fullscreen.
Wasting my time on Syndicate again...just like 15 years ago
fotoingo said:
Google for
tgetfile
and install it.
It will work then
Click to expand...
Click to collapse
thank you! but...
using pocketsnes 1.53 and tgetfile 5.0...
I now can load scm files... but then I get error and the program quits...
too bad...
skycamefalling said:
I also use Morphgear and the SNES emulation is fast, pretty and fullscreen.
Wasting my time on Syndicate again...just like 15 years ago
Click to expand...
Click to collapse
Got it working... but not it struggles in landscape... do you use any special settings?
Or is my x1 just a bad example? nothing works neither pocketplayer nor youtube.... hmmm
daweeb said:
Got it working... but not it struggles in landscape... do you use any special settings?
Or is my x1 just a bad example? nothing works neither pocketplayer nor youtube.... hmmm
Click to expand...
Click to collapse
Okay then, you start morphgear with the keyboard pulled out. Then you go to the Global Settings and set the Driver to "GDI" and uncheck "Disable Full Screen". Screen orientation should be North.
After that you go to the SNES settings and set the Screen Size to "Auto scale".
That works for me.
skycamefalling said:
Okay then, you start morphgear with the keyboard pulled out. Then you go to the Global Settings and set the Driver to "GDI" and uncheck "Disable Full Screen". Screen orientation should be North.
After that you go to the SNES settings and set the Screen Size to "Auto scale".
That works for me.
Click to expand...
Click to collapse
Now it works for me too! Thank you!!
Not managing to get sound though...
daweeb said:
Now it works for me too! Thank you!!
Not managing to get sound though...
Click to expand...
Click to collapse
No prob,
you just have to open the SNES options and check the box "enable sound". I just tried syndicate, terranigma and mario kart and the sound works good -I wouldn't say "perfect" because it sometimes seem to be a bit slow, but with 22kHz it's okay to play in this state.
hi, can someone give me a link or send me pocketsnes as i dont really want to sign up to the forum just to download it
Holy shi- , performance with morphgear is BAAAD! Totally the opposite of my expectations.
My S.E. M600 has a 208mhz ARM9 based chipset and it plays Sega Genesis games with high quality sound without any lag at all. GBA games on the M600 was worse compared to genesis, but still beter then this POS gaming experience.
Totally not worth the time it took to download the software and bluetoothing a 16mb ROM over from the m600 to the x1.
SomeoneSimple said:
Holy shi- , performance with morphgear is BAAAD!
Click to expand...
Click to collapse
It's definitely not the best, I agree. If someone knows a better Emulator that runs smooth and in fullscreen, he's welcome
SomeoneSimple said:
Holy shi- , performance with morphgear is BAAAD! Totally the opposite of my expectations.
My S.E. M600 has a 208mhz ARM9 based chipset and it plays Sega Genesis games with high quality sound without any lag at all. GBA games on the M600 was worse compared to genesis, but still beter then this POS gaming experience.
Totally not worth the time it took to download the software and bluetoothing a 16mb ROM over from the m600 to the x1.
Click to expand...
Click to collapse
M600? Correct me if im wrong but isnt this an X1 forum? Morphgear works 100% speed on my x1 without sound but I agree still a tiny bit laggy on the controls and room for small improvement.
"not worth the time it took to download the software" - mine is about 2meg, you mean that oh so painful 5 seconds??
"Bluetoothing a 16mb ROM" - right you might wanna check that one mate. I have 1578 SNES ROMS and the largest one is 5mb. that might be a source of your troubles
"POS Gaming experience" - I would attribute this to your totally rad & cool "208mhz ARM9 based chipset" (that being your phone is the POS not the software).
Try talking to some people in the M600 forum about this instead of just showing up on the X1 pages and throwing vicious words around where they're not wanted.
Oh thats right, there isnt one...
*Cue Flaming Me..... Now!*
Hi All,
Really interested in getting this snes emulation working ok my X1, going to be a silly question but where do you guys get the games? On the website I go to for the emulator it says "coming soon" under the games tab
Are they available freeware ? can someone point me to somewhere where i can get them freeware or purchase them?
Cheers,
Craig
SamAsQ said:
M600? Correct me if im wrong but isnt this an X1 forum? Morphgear works 100% speed on my x1 without sound but I agree still a tiny bit laggy on the controls and room for small improvement.
"not worth the time it took to download the software" - mine is about 2meg, you mean that oh so painful 5 seconds??
"Bluetoothing a 16mb ROM" - right you might wanna check that one mate. I have 1578 SNES ROMS and the largest one is 5mb. that might be a source of your troubles
"POS Gaming experience" - I would attribute this to your totally rad & cool "208mhz ARM9 based chipset" (that being your phone is the POS not the software).
Try talking to some people in the M600 forum about this instead of just showing up on the X1 pages and throwing vicious words around where they're not wanted.
Oh thats right, there isnt one...
*Cue Flaming Me..... Now!*
Click to expand...
Click to collapse
No need for flame, we're in the same boat anyway . I have my Xperia X1 for about 3 weeks now and i mentioned the S.E. M600i just for comparison (overall the M600 is no match for my new X1). But what i mean is, that vBax and PicoDrive for UIQ3 on a phone with a ARM9 208mhz chipset outperforms MorphGear for WM on a phone with a ARM11 528mhz chipset.
Silly isnt it?
Oh, and i dont see myself mentioning the 16MB ROM being a SNES game , do you?
On 24th Dec 2009 Schtruck from fpsece.net released his new version of FPSEce. On the website www.fpsece.net you can download FPSE v0.10 for free or get a version for a small donation of €5,- with the ability to save whereever you are whenever you like
It bringt speed-improvement, a new core, new GUI and supports a lot of more games now.
Even a new website is launched.
It's not like v0.96 which quits on my Xperiy 28of30 times I tried to run it... and it makes games more playable, really! (but I only testes with Final Fantasy VII right now - that's what I wanted the emu for .
Hope you enjoy it and if you like it, buy the supporter-version to support the future developement of this software.
I guess it's a really good Idea to give supporters that special-feature but keep the normal version for free! So you can use the software as long as you like.
Wow cool, I'll have to give this a shot!
@Cysign thanks for posting this, I'm having a problem trying to configure the keys with the Hardware keyboard every time I put it to Landscape and the screen goes black and just shows the FPS. How do I configure the PS1 buttons with the X1 keyboard. And my last question is when you load the game you want to play, after the sony logo pops up is the game supposed to Automatically play??? I'm trying to Run DinoCrisis 2 but so far having no luck. Edit : I used pocket ISO to rip the image.
Viper89 said:
@Cysign thanks for posting this, I'm having a problem trying to configure the keys with the Hardware keyboard every time I put it to Landscape and the screen goes black and just shows the FPS. How do I configure the PS1 buttons with the X1 keyboard. And my last question is when you load the game you want to play, after the sony logo pops up is the game supposed to Automatically play??? I'm trying to Run DinoCrisis 2 but so far having no luck. Edit : I used pocket ISO to rip the image.
Click to expand...
Click to collapse
when you slide out the keyboard press the ok button (the one next to the panel button) this should put the phone back into the portrait mode when the keyboard is out so you can configure the buttons. I dont no about the sony logo, on mine it never came up i think you have to change something in the fpsce.ini file??
lebkom said:
when you slide out the keyboard press the ok button (the one next to the panel button) this should put the phone back into the portrait mode when the keyboard is out so you can configure the buttons. I dont no about the sony logo, on mine it never came up i think you have to change something in the fpsce.ini file??
Click to expand...
Click to collapse
Thanks man, I'm going to try it now. Edit I meant the playstation logo.
Viper89 said:
Thanks man, I'm going to try it now. Edit I meant the playstation logo.
Click to expand...
Click to collapse
I tried both ok buttons and niether did anything????
Viper89 said:
I tried both ok buttons and niether did anything????
Click to expand...
Click to collapse
you might need to change gfxdrv in the fpse.ini file (program files/fpseCE) to 3. i think the default is 2 which is qvga and 3 is for vga. 4 is for directx but this doesent work on my x1
Hi to all!
I have a problem. When I set MultiFix=1 it is finally possible to bind more buttons on my I740, but it becomes impossible to use on-screen buttons and arrows.
Does anybody know how can I use both of them???
PS: sorry for my English
I start FPSE with keyboard-slided-out in portrait-mode (I use Wisbar to manually rotate screen if I need...). But you don't need this.
If you slide out keyboard, you can press the upper left corner (near the FPS-counter !!! ) to go back to portrait-mode.
Then just configute your keys and when I want to go back to landscape-view I close and open Keyboard again. When I use the screen-rotate-button FPSE leafes and I have to restart my device.
If images don't work using PocketISO try with uncompressed ISO.
I.E. Final Fantasy VIII works on my device without compression and when I use PocketISO it doesn't. But could be a setting in PocketISO - haven't figured out this right now.
If you find bugs please report them to the FPSE-forum!
Compatibility-list availible: HERE.
Just figure out if your game usualy should run.
0.10 working on WM6.5.3?
Wajk said:
0.10 working on WM6.5.3?
Click to expand...
Click to collapse
should give it a try. It's for free - so don't hesitate to give it a shot
If it doesn't work, you cn tell me and I post it into the FPSEce-board - or just do it yourself xD
It important to give Schtruck all information about problems so he can bugfix them
Sancher said:
Hi to all!
I have a problem. When I set MultiFix=1 it is finally possible to bind more buttons on my I740, but it becomes impossible to use on-screen buttons and arrows.
Does anybody know how can I use both of them???
PS: sorry for my English
Click to expand...
Click to collapse
Just use FPSEce-board. I'm sure that guys may help you quicker/better than here...
Cysign said:
I start FPSE with keyboard-slided-out in portrait-mode (I use Wisbar to manually rotate screen if I need...). But you don't need this.
If you slide out keyboard, you can press the upper left corner (near the FPS-counter !!! ) to go back to portrait-mode.
Then just configute your keys and when I want to go back to landscape-view I close and open Keyboard again. When I use the screen-rotate-button FPSE leafes and I have to restart my device.
If images don't work using PocketISO try with uncompressed ISO.
I.E. Final Fantasy VIII works on my device without compression and when I use PocketISO it doesn't. But could be a setting in PocketISO - haven't figured out this right now.
If you find bugs please report them to the FPSE-forum!
Compatibility-list availible: HERE.
Just figure out if your game usualy should run.
Click to expand...
Click to collapse
Thanks for the info, On the list it says Dino Crisis 2 works good, I'm going to try it without the Pocket ISO if that dosent work ill try the to re download the game again. If you have spare time could you test it out and report back.
sorry...PS1 games are that cheap that I only rip my own games for playing (I bought Final Fantasy VII-XII for my PS2, which has no chip inside)...I don't download games which I can buy original for less than €20,- .
But perhaps it's your ripping-tool...a wrong setting?
I have trouble getting FF VIII and IX work - tried to rip them twice, I'm currently waiting in FPSE-board for a solution... I'm sure I get the problems by ripping my CDs.
When FPSEce website is lannched completly there should be a compatibility-list which perhaps has additional information for ripping your games and there'll be a wiki. I'm sure it'll get users closer to solve their problems
holy crap i cant believe this day has finally come. i have been following this project for atleast a year.
Hmm. I downloaded it the other day and right now I'm playing Diablo 1 on it. Works very good, better than I expected it.
First my games did not load and my phone rebooted everytime I tried to play. But now I installed in ON THE DEVICE, running games from my memory card. Works flawlessly.
I have to use frameskipping for Diablo 1 though. I consider supporting the developers because it's great software!
gonna try the non delay ff7 fighting scenes thanks for the info!
I have a few bugs to report. on my symbol mc35 it crashes at startup with around 30MB free ram.
on my touch pro it works fine in portrait mode but if i open the keyboard i cant reconfigure the buttons.
@key-config
slip out keyboard, FPSE changes to landscape-mode. now press near/on the FPS-counter. FPSE turns back to portrait-mode. configure your buttons and than ! don't use the orientation-buttons (this may crash FPSE - at least on xperia!) slip keyboard in and out again to switch to portrait-mode again.
that's an already known bug... you guys should read fpse-board here it is: http://www.fpsece.net/forum2/viewtopic.php?f=7&t=265&p=4807&sid=533071d203f08d489360950cef119a84#p4807 (there's also another problem with omnia...but one guy postet it's solution^^)
This emulator drains battery very fast!!
I was playing FF9 without wall charger.. After 40 minutes i think, the battery ran out! Not able to save without saving point how good if i have save state feature...
Cysign said:
sorry...PS1 games are that cheap that I only rip my own games for playing (I bought Final Fantasy VII-XII for my PS2, which has no chip inside)...I don't download games which I can buy original for less than €20,- .
But perhaps it's your ripping-tool...a wrong setting?
I have trouble getting FF VIII and IX work - tried to rip them twice, I'm currently waiting in FPSE-board for a solution... I'm sure I get the problems by ripping my CDs.
When FPSEce website is lannched completly there should be a compatibility-list which perhaps has additional information for ripping your games and there'll be a wiki. I'm sure it'll get users closer to solve their problems
Click to expand...
Click to collapse
I finally got Dino Crisis 2 to work, I found a website that actually has the roms already with the image. I can't belive how smooth this plays to. If you ever get a chance to buy/download Dino Crisis 2 I recommend it, It's Like Resident Evil meets Jurassic Park lol
Surprised this hasn't been posted yet, but the new FpseCE has been released.
I am getting anywhere from 45-60 FPS on Final Fantasy VII (60 FPS standard for NTSC). FF VII runs really good and FF IX runs pretty good as well. Twisted Metal 2 gets around 40-48 FPS. All FPS posted are with the sound turned off. A but disappointing, but turning on the sound slows the frame down a lot and slows down the game. For on the go play I can deal without sound.
FpseCE Main Site
Forums
Many videos of this released found here
Thanks for letting us know!
I am a noob and i do not get how to get it working.
ryotgz said:
Surprised this hasn't been posted yet, but the new FpseCE has been released.
I am getting anywhere from 45-60 FPS on Final Fantasy VII (60 FPS standard for NTSC). FF VII runs really good and FF IX runs pretty good as well. Twisted Metal 2 gets around 40-48 FPS. All FPS posted are with the sound turned off. A but disappointing, but turning on the sound slows the frame down a lot and slows down the game. For on the go play I can deal without sound.
FpseCE Main Site
Forums
Many videos of this released found here
Click to expand...
Click to collapse
what are your setting. i can get FFIV working but not at 60 fps. about 35 40 with no sound. whats your setup>
I played around with this the other night and was getting on average 50 fps with Gran Tourismo. I just cant figure out the buttons either on screen or with the keyboard. For instance I see pics like this http://img91.imageshack.us/img91/4633/65196821.png and would like to know how they got the keyboard setup. Maybe I'm missing something simple. Any help would be very grateful.
Darkseid83 said:
what are your setting. i can get FFIV working but not at 60 fps. about 35 40 with no sound. whats your setup>
Click to expand...
Click to collapse
I haven't tried FF IV, but I have tried Chrono Trigger (snes) that was bundle with some FF games and got worse frame rate than I did with FF VII which is 3D... I have attached the INI settings I use with FF VII. Some games use different settings and some people have posted them on the FpseCE forums.
homeland said:
I played around with this the other night and was getting on average 50 fps with Gran Tourismo. I just cant figure out the buttons either on screen or with the keyboard. For instance I see pics like this http://img91.imageshack.us/img91/4633/65196821.png and would like to know how they got the keyboard setup. Maybe I'm missing something simple. Any help would be very grateful.
Click to expand...
Click to collapse
Check out the youtube link with videos I posted above. It has some walk thrus setting up keys and such. The pic you posted is from an older version. The new one doesn't have that anymore, but replaced with screen overlays. I use the on-screen overlays as I found using the keyboard drops the frame rate down a lot.
ryotgz said:
I haven't tried FF IV, but I have tried Chrono Trigger (snes) that was bundle with some FF games and got worse frame rate than I did with FF VII which is 3D... I have attached the INI settings I use with FF VII. Some games use different settings and some people have posted them on the FpseCE forums.
Check out the youtube link with videos I posted above. It has some walk thrus setting up keys and such. The pic you posted is from an older version. The new one doesn't have that anymore, but replaced with screen overlays. I use the on-screen overlays as I found using the keyboard drops the frame rate down a lot.
Click to expand...
Click to collapse
Oh my bad did i say IV i meant VII thanks tho
Can someone post a how-to here to get this running well? I can't view that site here at work.
chrisrj28 said:
Can someone post a how-to here to get this running well? I can't view that site here at work.
Click to expand...
Click to collapse
Sorry for the delay. I assume you're able to access the site now If not, I can post the instructions.
ryotgz said:
Sorry for the delay. I assume you're able to access the site now If not, I can post the instructions.
Click to expand...
Click to collapse
Hey there yes can you please post a how to? I have FFVII and I have fpseCE installed and all, the issue I ran into was that my FFVII file was a .7z and it did not show up when I started the Em, so I renamed it with total commander to .z and it sees it but when I select it the Em just closes.
If you or someone can post a step by step to get FFVII working (I don't need sound as I imagine it will slow things up) I would forever be endebted.
Well if you have the actual game make a copy of it (I use clone cd ) it will give you an img file a ccd file and few others. drop those files anywhere in your storage card.people say if you keep it in the root folder you get more fps. i never noticed a difference ::shrugs:: load up the emulator and choose the img file (it'll be like 600 something MB's)
Do a little a little reading on the forum over there. getting it to run is easy. tweaking it is another story.
chrisrj28 said:
Hey there yes can you please post a how to? I have FFVII and I have fpseCE installed and all, the issue I ran into was that my FFVII file was a .7z and it did not show up when I started the Em, so I renamed it with total commander to .z and it sees it but when I select it the Em just closes.
If you or someone can post a step by step to get FFVII working (I don't need sound as I imagine it will slow things up) I would forever be endebted.
Click to expand...
Click to collapse
If you use pocketiso to compress your iso's, your games will not only be smaller, but also will run faster (more fps). If you compress it without ripping music, videos it will have the extension .z which explains the crash chrisrj28 talked about.
Ok thanks for the help of those here, finally got it playing, Awesome! How do I apply the .ini from the first page? I want to see if I can get a more consistent frame rate. I did use pocketiso to compress it, 23% smaller!
Thanks for the help again
Ok that's some cool stuff, however they does not say whether you can play PS1, PS2 or PS3 games with the emulator ?
Do we have some info on that?
Thx
thug_life_inc said:
Ok that's some cool stuff, however they does not say whether you can play PS1, PS2 or PS3 games with the emulator ?
Do we have some info on that?
Thx
Click to expand...
Click to collapse
its PS one only
This emulator is for Playstation 1, I don't believe there is a cell phone that can emulate a PS2 properly and there is no way in hell we will get PS3.
So yeah I just googled and found how to apply the .ini file, just replace the one for the game that is there already. i tried the .ini from the 1st page and I am actually running at lower FPS now, gonna play with it and see what happens.
i screendl the rom and it is .bin file. can i still play it? and where do i put it? also i can't even get to the gamepad screen. any help? (touch pro 2 just in case needed to know)
irkan said:
its PS one only
Click to expand...
Click to collapse
That makes things clearer thanks I guess we will be now waiting for "THE INI" file to be working fine for TP2?
Playstation emulator help
Ok if anyone needs help with
1)finding roms sites you need links and alot of them
2)finding the sch.1001 bin file
3) instructions on what to do with roms
Then click on this link and your questions will be answered
http://krenisiswinmobilegamesapps.com/playstation-roms-list-t59.html
If there is any other questions that you have leave them here or PM me.
I cant get this to work on my Tilt2. I can install it and when I run it the first screen I see is a load cd-rom screen. I select the rom (FF tactics) and it just closes. no errors or anything.
I used to have a Touch pro 2 and was able to play Need For Speed underground, Assault 4 perfectly. Both are racing games utilize the Gsensor. However, the HD2's gsensor is not very sensitive. I tried to tilt the phone all the way for it to works. It does work on both games but not playable at all. Does anybody else having the problem using HD2 for gaming? I'm grateful if anyone can show me how to solve this.
i had the same problem with nfs the gsensor was horrible in that game, but for teeter it is quite sensitive. I would think that it has to do with the software within the game itself.
I had also the same problem with nfs shift 1.0.2. The G-Sensor should be not accept from this game.
Has any one solved this problem yet? I'm also looking for the solution!
Steeph said:
Has any one solved this problem yet? I'm also looking for the solution!
Click to expand...
Click to collapse
as far as nfs shift is concerned it has been a conflict with resco-software. A special dll had to be moved. Sorry, I don´t remember the correct name and the correct destination. But if you search the forum you´ll find it. I for myself had to delete another game called "resco snake"
Santa-Claus said:
as far as nfs shift is concerned it has been a conflict with resco-software. A special dll had to be moved. Sorry, I don´t remember the correct name and the correct destination. But if you search the forum you´ll find it. I for myself had to delete another game called "resco snake"
Click to expand...
Click to collapse
Strange... I don't have any Resco software running on my device. Also checked registry. Nothing there...
Any ideas
Greetz
Anyone some other ideas?
hello everyone their son!i'm sorry but I am Hungarian altogether I do not can in English but it would like to be helped!this problem caused a headache at me!I believe it only unfortunately the ruin refreshing the Solution!only one single ruin did Ez at me.i tried other with that of 5 halves and it worked with all nfs!good luck!
sorry ROM update
Budrov said:
hello everyone their son!i'm sorry but I am Hungarian altogether I do not can in English but it would like to be helped!this problem caused a headache at me!I believe it only unfortunately the ruin refreshing the Solution!only one single ruin did Ez at me.i tried other with that of 5 halves and it worked with all nfs!good luck!
Click to expand...
Click to collapse
wow!!! i certainly got it!!