Hi
I am trying to get v2.15.50.14 on to my HTC HD2 6.5 device and getting the error 262. My HTC has 448MB RAM and 512MB Flash ROM as reported by the phone.
I have attached screenshots of the error. Searching around the forum it looks like the Radio stack is not compatabile with the HTC but can someone assist to confirm this.
I have attacjed couple of screenshots of the error. The software is being run in admin mode and the error happens after I get the HTC prohress bar on the phone and it sets at 0% and eventually timeouts with the error.
take out battery, wait a moment, try again
If it's just the radio that you're trying to flash, have you tried flashing it whilst the phone is in bootloader?
I have taken the battery out tried several times. Also tried on a nother computer same results. Also tried updating it from the bootloader menu and same result.
I am trying to put Win 7 on it and therefore as per documented steps updating the radio stack first.
Th Bootlodarer screen has the following info if it is relavant in troubleshooting
PB81100 HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
USB
Well, if you have SPL 1.42.0000 on your device, you should check the "readme" files about what is needed to run WP7.
HSPL 2.08 plus a specific Radio ROM is key to success. Please re-try.
Thanks, the readme that came with the package did not mention the pre-req. So assume HSPL 2.08 (http://forum.xda-developers.com/showthread.php?t=611433) will work with v2.15.50.14 stack? Will appreciate if you can point me to the thread that explains the pre-reqa for HSPL/Radio stack. Thanks again for yr help.
There are quite numerous threads mentioning HSPL as a mandatory step in order to install any different Radio ROM version - or MAGLDR, for that matter.
Check here.
Once you have HSPL on your device, you´ll be able to flash other Radio ROM versions, too.
In the same link above, you will see the other mandatory item: The Radio ROM must support the higher RAM. The latest Radio ROM Version which does is 2.15.
Thanks for your assistence. One final question (hopefully), I am bit confused about Radio version requiring 576MB ROM. My HTC reports 512MB ROM will v2.15.50.14 support 512MB?
OMG. You really should know your device. The european LEO comes officialy with 442 MB RAM and 512 ROM. In fact the device has 576 RAM. They are enabled by flashing 2.xx.50.xx Radio's. Unfortunately there is no way to get more ROM on the european LEO
Thanks for all yr help. Have Win7 running with SD card
No geeting the marketplace to go.
Issue's with the Marketplace will be down to not following all the steps required to alter the registry so that the phone thinks it is an HD7.
There are various threads in this Q&A section that will walk you through all the steps you need to perform prior to trying any LIVE services.
I believe that if you haven't carried out all the steps and have tried accessing Live services then you may have no choice, but to re-flash your device.
Related
Please Help me i installed hspl and than uninstalled it and ow the spl is 2.08.000 and when i bought the hd2 it was 2.10 HELP!!!!!!!!!!!!!!
hey i think that the new hspl reverts to 208 because 2.10 won't work it downgrades your spl i would search the thread on how to revert to stock
download and install T-Mobile 2.13 Rom.
i also tried that, but it still says 2.08
saying "i have 2.08" is like saying "i have a ford"..... a ford what?
what does it actually say? 2.08.0000 or 2.08.hspl ?
i suspect it says .hspl, because that would prevent the 2.13 rom from upgrading the spl to 2.10.0000, which many people will tell you works when your spl is 2.08.0000
yea i also want to upgrade back to hspl 2.10, and i did the tmobile update it still says hspl 2.08.000
You can get back to spl2.10 by flashing stock T-mobile 2.13 via SD card. Plenty of info of how to flash rom with SD card. I hope it can help.
what do you do if your phone doesn't allow dls
My phone doesn't allow downloading from the sd. It posts Improper certification or parts missing. Obtain proper certificate of reload item. It has been doing this since it blew away my downloaded built of android when I touch the windows start button next to the home button below the screen. I have searched for an answer, but can't find one. I even flashed hspl3, and I still can't flash android?
videov said:
My phone doesn't allow downloading from the sd. It posts Improper certification or parts missing. Obtain proper certificate of reload item. It has been doing this since it blew away my downloaded built of android when I touch the windows start button next to the home button below the screen. I have searched for an answer, but can't find one. I even flashed hspl3, and I still can't flash android?
Click to expand...
Click to collapse
Try task29 by doloop..
Read here first
I am new to Tmobile HTC Hd2.
I got one 2 day before.I am attaching my phone info below.I dont know if its patched or not: plz tell me what to do next to flash a custom ROm without any problem.
When i open my phone in bootlader mode , following info is shown:
PB1120 HX-B3
SPL-2.08.0000 8G XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X40
I dont know if its Hard Spl'ed or not..Kindly tell me is it?
OS Version 5.2.21889
Manilla Version 2.5.20121412.1
ROM Version 2.10.531.1 (82076) WWE (Is it a stck ROm)?? How do i take backup of my ROM?
ROM Date 02/22/10
Radio Version 2.08.50.08_2
Protocol Version 15.34.50.07U
Please Guide me to flash....Do i need to flash a radio as well? i live in india..my phn is carrier unlocked....Hope to get a reply soon.
Thanks in advance.
You will know if it's hard-spl'd if it shows 2.08.hspl instead of 2.08.0000
You need to read the forum [Tutorial] sticky a few times and then make sure you fully understand that you cannot flash any .51 radio or you will brick your device.
Download hspl3 and run it while the device connected to your pc. Pick the correct option and then go read the sticky again and again until you understand it perfectly.
You will see in the sticky that there are two ways to flash Roms and radios, read both carefully.
Thanks, That helped a lot.
Also please tell if i perform a hard spl, then would it make any change in the functionaing in the device? Or i can hard spl my device can continue using my stock ROm?
No, it will not effect anything. It only allows you to flash custom Roms and radios and won't be overwritten or removed when flashing (which is why it's referred to as "hard"). But, if you're planning on keeping it stock there's really no point.
Is there is any utility to backup/dump my stock ROM?
there is a thread of stock roms,but after the hard spl, installing the stock rom again, wud that be feasible, or i would have to flash the stock radio again to do that?
You can use SPBbackup or RescoBackup (to name a couple) to backup stock ROMs just fine. If you have hspl and flash a stock Rom from your SD card it will overwrite the SPL, that's the only way to remove it besides manually doing it through the hspl3 utility.
HSPL does not change the Rom, it's just a hacked spl to allow for custom flashing without brickin your device.
The radio is rarely included with a ROM, the only way it gets changed is if you flash a new one. If you are asking how to revert back to stock later on, you can simply flash the stock\shipped Rom your phone came with (usually TMOUS 2.13) from SD card and that will get you back to stock everything except radio. Or you can use the HSPL3 utility to remove the hspl manually.
on the stock roms page just make sure not to flash any test versions with MFG SPL.
I never experienced any problems whatsoever with my previous HD2. It had the Vodafone ROM on it (latest). Unfortunately I lost it a few months ago but bought a used one shortly after.
This HD2 unfortunately died on me. I bought a used motherboard through eBay from a guy in England (I'm in the Netherlands myself) and replaced the broken motherboard with the one from eBay. This brought my HD2 back from the dead.
But I noticed it had a weird Arabic ROM version on it so I wanted to flash the latest official HTC ROM on it. This at first didn't work because the RUU kept complaining the ROM was not suitable for this HD2.
So I first flashed HSPL4 after which I was able to flash the official HTC ROM v3.14.404.2.
But my problem is I'm constantly encountering what seems memory related problems. Sometimes I want to start a program and I get a pop-up saying there's no sufficient memory available to start the program. Other times nothing happens at all when I try to start a program. Or for instance the display doesn't update properly. The only that helps is switching the phone off and restarting it again (soft-reset).
But I need to soft-reset my phone about 5-10 times a day.
I've tried reflashing the ROM a few times now, even did a Task29, but I still get the same errors.
Is this a ROM problem or a hardware problem? Or is there any way to troubleshoot what could be causing this?
what does the spl line say in bootloader? a 3.14 rom wont run right on any thing except 3.03.0000 or 3.03.hspl, it loses a few hundred meg of ram.
Ah, well that's the problem then.
Code:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
I'm pretty sure I used DFT HSPL4 to install the HSPL. Can I use that too to install SPL 3.03?
Zippy1970 said:
Ah, well that's the problem then.
I'm pretty sure I used DFT HSPL4 to install the HSPL. Can I use that too to install SPL 3.03?
Click to expand...
Click to collapse
To answer my own question, I just used HSPL4 to install SPL 3.03.HSPL.
The difference I immediately see is that my total program memory went up from 208.81MB to 336.77MB and (more importantly) free program memory went up from 46MB to 173MB.
common error, most people dont notice the dropdown selector in the hspl.exe program, or dont really get what the options mean. for all non 3.14 roms, they will all run on any spl.
Just to let you know that switching to SPL 3.03.HSPL seems to have solved all my problems. Well, the HD2 related ones that is.
Everything runs very smooth now (some programs that didn't run at all now run without problems) and I haven't had a memory related error since.
Thanks!
i searched and searched all over xda but no thread could give any definite answer.
here's a summary of my problem:
I've been using android on my phone through NAND for quite a while, but the "tinkerish" part of me wanted to try windows phone 7 for a while. i "had" spl 2.08 and the correct radio, magloader also installed. but the problem was that i needed to perform task29 from hd2 toolkit but my phone wasn't being detected by pc...giving he "qualcomm driver" thingy....so i figured flashing a stock win 6.5 from sd card will make an easy alternative task 29 wipe then use active sync and reinstall hd2 driver....i tried the 3.14 wwe rom but it failed and now my phone is stuck at bootloader....can't DO ANYTHING!
it gives:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(touch) 0x30
please don't ask me to search and stuff...i'm kinda desperate now :/
95 views and non knows how to help? :/ come on guys...help a fella HD2 out...here's few more info...tried flashing a 1.66 wwe win mobile from sd, it didn't work...tried flashing radio from sd card, it didn't work, tried flashing magloader, it didn't work...i contacted HTC support and i gave my serial number, turned out my phone is shipped from india...downloading an indian ROM now...but very slow connection and i'm eagerly waiting to try it out...
you must have HSPL 2.08... also, install WMDC for correct drivers, boot to threecolor (bootloader) and connect device via USB... message Serial must change to USB... then you can flash WM (best is original WM not cooked) or perform Task29
Was the phone Sim-locked to an operator?
I'm no expert, but I have read of phones failing if incorrect stock ROM re-flashed, ie, you need the same ROM for the country & Sim-lock as the original. Sounds like you might be on the right lines with the Indian ROM..
Good luck
where to get the WDMC drivers? will i overcome the qualcomm driver popping up in windows? it's the main reason i couldn't do a task29 in the first place....because in bootloader i do get the serial written down, but it never changes to USB because windos can't verify the driver.....thank you.
rniblett said:
Was the phone Sim-locked to an operator?
I'm no expert, but I have read of phones failing if incorrect stock ROM re-flashed, ie, you need the same ROM for the country & Sim-lock as the original. Sounds like you might be on the right lines with the Indian ROM..
Good luck
Click to expand...
Click to collapse
no it's a non branded EU model...yeah probably the indian ROM will help...but very slow download speed...i can't wait ^^'
From what I've read on Task29 thread (I will search and post a link here), doing Task29 will erase the Radio too. So, after finishing erasing the phone, you must install the radio. I'm not 100% sure. I did a Task 29 on my phone just now and for safety, I installed the radio again. Then I was able to install a stock ROM from HTC site. Worked for me. But wait for someone with more experience than me.
Here is the link
http://forum.xda-developers.com/showthread.php?t=644781
geodor said:
From what I've read on Task29 thread (I will search and post a link here), doing Task29 will erase the Radio too. So, after finishing erasing the phone, you must install the radio. I'm not 100% sure. I did a Task 29 on my phone just now and for safety, I installed the radio again. Then I was able to install a stock ROM from HTC site. Worked for me. But wait for someone with more experience than me.
Here is the link
http://forum.xda-developers.com/showthread.php?t=644781
Click to expand...
Click to collapse
i had knowledge of this before, thanks for reminding. the problem is that i can't do a task29 in the first place due to a lack of driver. but of course, when i'm able to do a task29 i'll re-flash the radio.
arabology said:
i had knowledge of this before, thanks for reminding. the problem is that i can't do a task29 in the first place due to a lack of driver. but of course, when i'm able to do a task29 i'll re-flash the radio.
Click to expand...
Click to collapse
thanks for the link
geodor said:
From what I've read on Task29 thread (I will search and post a link here), doing Task29 will erase the Radio too. So, after finishing erasing the phone, you must install the radio. I'm not 100% sure. I did a Task 29 on my phone just now and for safety, I installed the radio again. Then I was able to install a stock ROM from HTC site. Worked for me. But wait for someone with more experience than me.
Here is the link
http://forum.xda-developers.com/showthread.php?t=644781
Click to expand...
Click to collapse
hmmm...just tried that....didn't work either :/...gave an "error 260".....i read that the qualcomm CDMA driver will popup when one has a faulty HD2...but mine works great...or "worked great" before this....i can't seem to find out what's going on...
Good news at last! the Indian ROM worked and my phone booted to windows 6.5! ^.^ now i'm letting it charge before trying to flash windows 7. next step will be spl 2.08 and magloader thanks to every one that reviewed this thread and post replies. hopefully see you in the windows 7 development section soon. this thread can be closed now, in the hopes to help whoever has a similar problem. cheers!
Good news!!!
Hello,
At first, I would like to say that I know there is a lot of threads about this issue, but NO solution was good for me. I was looking and trying to do this a very long time...
So, here is what I got. I have HTC Leo (HD2 T8585), which now have HardSPL 2.08, radio 2.15.50.14 and Windows Mobile from sunnysoft stock ROM (and no other OS was installed before). After installing MAGLDR (nevermind what version, I tried all of them) I have freeze on white logo with green HTC text. Everywhere there was written as a solution, that there need to be HSPL and Radio in exact version, but I have them and it still don't work. Tried to do Task29, but it don't help.
Here is history of this device. When I got HD2, originally there was radio 2.15.50.14 and SPL 3.03. Then I did ROM downgrade (I didn't saw that there is HSPL4 method already, but it doesn't matter I think) and I got radio 2.05.51.05_2, SPL 1.42.0000 XE. I did HSPL and upgraded Radio ROM, finally getting this result: radio 2.15.50.14, SPL 2.08.HSPL 8G XE and working WM6.5 (so this is what I have now). And if I try to install MAGLDR it ends with a freeze on white logo. Does anybody have idea where I do mistake (or what I didn't pay attention)?
And I would like to write, that even if I have proper Radio ROM and OS with enabled more RAM, there still is 320MB. And Android running by Haret stays after "Jumping to the kernel"...
I'm wonder if my HD2 is genuine (I would not like to hear that it's HTC Pro Three or other prototype). It was bought after official release and sent to guarantee because of microphone not working after some months. Then I saw that P/N is different. Now I have P/N 99HJY005-00, but on BOX there is 99HJY005-02.
Is there any method to get it running? Also even if it displays 320MB, there is ~200MB of RAM and I'm getting free ~60MB RAM WITHOUT Manilla, sometimes even camera can't start... If I can't get Android/WP7 running, I would like to know which radio will get best battery life (now it can do ~24h, which is very short) and will give me more free memory.
Please, anybody, help.
Thanks, someb.
Regarding the second part about the memory,, ,, you say you downgraded to getspl 1.42 then upgraded to hspl and radio2.15.50.,,, then later you say that you have the requirements for unlocked ram, ,,you don't since it also needs a compatible rom. (Or magldr etc)
However the rest sounds odd .
I met the requirements, because I didn't write that I flashed ROM that unlocks additional RAM for test... and you know what? There was still 320MB...
And I know, it seems really odd.
Does anybody know what a problem is with my Leo? And can I send this on guarantee to replace motherboard without any problems?
Are you taking into account that the hardware takes 128Meg at boot, so a regular stock HD2 shows 448-128=320 as total available ram?
Yup, it's something wrong with my Leon, because even with a combination of different Radio ROMs and shipped or custom ROMs even Haret don't work. I think that when they were repairing my HD2, they switched motherboard. Even it's written "Made in China" on the back of my Leo. The P/N is different and even the IMEI is different now after repair.