After istalling dual boot on magldr i get android working on sd but when i try to boot wp7 i got 123fatal hit 3 error; if i boot sd magldr android runs well.
I tried changing sd with an other where i put wp7 back up, but nothing to do
fatal hit 3 error is still there.
I suppose something was corrupted in magldr.
Any suggestion?
try installing everything again
Any other suggestions?
I have the same problem and i installed again and again, always with a task 29 to clean up the rom ... but is always the same ... 123Fatal Hit 3 error ...
Even i have the same error.
Wat is the solution?
or rather what is the problem?
Related
I have major problem with my nand memory.
Few days ago my hd2 hanged while I was doing some backup via Titanium Backup and since then I have a problem with my device.
Generally nand android builds are not working (boot animation stuck), some of them actually do work but with problems (f.e FC's on everything or do not recognise my SD card).
When I'm trying to flash WP7 usually an error occurs: (partition 4)
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: flash write failed.
Info: .\RSPL\RSPL.cpp (710)
Click to expand...
Click to collapse
I wrote usually becouse actually I have been able to flash it few times (3 or 4 on 20 attempts) but then windows stuck on boot logo or device hanged when I was trying add new contact.
I did Task 29, reflashed Radio and MAGLDR 1.13. Problem still persist...
Please anyone help!
Ziaren said:
I have major problem with my nand memory.
Few days ago my hd2 hanged while I was doing some backup via Titanium Backup and since then I have a problem with my device.
Generally nand android builds are not working (boot animation stuck), some of them actually do work but with problems (f.e FC's on everything or do not recognise my SD card).
When I'm trying to flash WP7 usually an error occurs: (partition 4)
I wrote usually becouse actually I have been able to flash it few times (3 or 4 on 20 attempts) but then windows stuck on boot logo or device hanged when I was trying add new contact.
I did Task 29, reflashed Radio and MAGLDR 1.13. Problem still persist...
Please anyone help!
Click to expand...
Click to collapse
Bro, did u got any anwser ??
please help, i have the same issue
Here is what I suggest you do : -
Flash a STOCK Winmo 6.5 ROM. Once that's done and you have Winmo 6.5 working, you'll atleast have your phone back up. Then I would suggest that you pick a LITE ROM to start with and see how that works for you. If it works, then move to your preferred ROM. Make sure that you're following instructions on how to flash back and forth to the letter.
Your device powers on. That's something you should be happy about.
im no developer but here is my solution
In my experience with this problem and its solution:
First remove the battery, and remove the SD card...
Second place the battery on the phone and reset it with the volume up key...
then take off battery and place the SD card back again, then place the battery...
restart the phone on plugged to a computer... (i do this on an WIN xp or WIN 7 machine).... so far it has crashed 3 times/same errors in the boot and this has worked.... i guess still some bugs need to be fixed...
(DONT KILL ME IF IT DOESNT HELP..IM NO EXPERT BUT ITS WORKED FOR ME..)
Try pulling your sim card, sd card & rebooting. If that doesnt work, try to flash an official rom from SD. (LEOIMG.nbh on root of SD, then boot with both volume buttons held) Upon 1st boot remove sim & sd. This should work, I had a simular problem and this fixed it. Android would not boot all the way, recovery wouldn't flash & WM gave me partition errors. I still had some issues in WM6.5 & could not flash the most recent EnergyROM with the newest HSPL. I eneded up calling warranty on mine. Hopefully the SD flash method will work for you.
KillaHurtz said:
Try pulling your sim card, sd card & rebooting. If that doesnt work, try to flash an official rom from SD. (LEOIMG.nbh on root of SD, then boot with both volume buttons held) Upon 1st boot remove sim & sd. This should work, I had a simular problem and this fixed it. Android would not boot all the way, recovery wouldn't flash & WM gave me partition errors. I still had some issues in WM6.5 & could not flash the most recent EnergyROM with the newest HSPL. I eneded up calling warranty on mine. Hopefully the SD flash method will work for you.
Click to expand...
Click to collapse
They only need to hold the volume down button to get the bootloader to come up not both volume buttons.
Hi there,
yesterday I tried to flash a wp7 ROM to my HD2 (Europe version) and after installing HSPL and MAGLDR I flashed the ROM . It went pretty smooth , but after I clicked Finish on my PC . My phone first - didn't reset(don't know if i should do it manualy ) and second stops at the DFT wallpaper , or at some cases goes rebooting randomly . I know that it has Storage card issues .. i tried several cards... and still didn't boot up the OS .. any ideas .. .??
OK slight update...
now it boots up WP7 , but when i restart the phone it goes back to MAGLDR .. is that normal ... ? And also when I plug in the Storage Card it still goes rebooting at will ...
make WP7 default for booting
10. Services, 1. BootSettings, 1. Boot source 3. WPH from NAND
seems your card not compatible
but it's not giving me the menu now.. just loading 123456... go go go and boots up ...
MoveMaker- said:
but it's not giving me the menu now.. just loading 123456... go go go and boots up ...
Click to expand...
Click to collapse
That's how it should normally boot up. if you're getting stuck in the boot loader, then it must be your card.
if you want to access MAGLDR, when your phone is booting up, hold the power button until the menu appears.
Thanks... all's good now ..
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
that doesnt sound good, can you get the magldr boot menu to load?, hold down call end from when you turn it on
Do the volume buttons work there?
can you get to the tri coloured bootloader at all?
sounds kinda serious, if possible id want to SD flash a stock WM6 ROM, SD flash because it would overwrite the SPL, which may be buggered, course 1E can be a memory address which is deffinitely not good :/
Raviteja894 said:
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
Click to expand...
Click to collapse
with UltraFruit ROM restarts is because problem with multitouch driver..
also try remove battery and wait one minute, put back battery and try boot now...
if you want reinstall WP7, no need to flash WM6.5
simply use NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
install, run...
1. use Task29 and flash it (this will be formatted NAND memory)
2. use MAGLDR and flash it
3. flash WP7....
Earlier today my custom ROM froze. I rebooted the phone by taking the battery out and the phone would only go as far as the Magldr screen where it says "Go Go Go", no matter how many times I tried, the ROM wouldn't boot.
So I wiped my phone with Task29 (even tried installing an original WM6.5 ROM), and tried to reinstall Magldr and a new ROM. However, after I run Task29 and Magldr and turn the phone on, only the white HTC screen displays. I could not get the phone to display the Magldr menu.
Finally after repeating the above a couple of times, I managed to get the Magldr menu to display, but once I install the CM Recovery and enter AD Recovery to install the new ROM, Magldr again gets stuck after displaying 'Go Go Go!'.
I also note that as the phone boots up into Magldr, one of the lines say "nand kernel open failed".
Any idea what is happening and why I cannot boot into Ad Recovery (or my ROM) and always get stuck on 'Go Go Go!'?
it could be a corrupted NAND ic?
have you tried to boot SD?
mengfei said:
it could be a corrupted NAND ic?
have you tried to boot SD?
Click to expand...
Click to collapse
A clean install of the original Windows Mobile 6.5 boots and works. How could I rectify a corrupted NAND in this case?
EViS said:
A clean install of the original Windows Mobile 6.5 boots and works. How could I rectify a corrupted NAND in this case?
Click to expand...
Click to collapse
if that is the case it seems like your nand is OK or there could be just soem bad blocks(i'm just guessing here)
how about giving this a try then run an SD version before going to NAND version
.. run HD2 toolkit
...bootloader
- HSPL 2.08
- Task 29
- Radio_15.42.50.11U_2.15.50.14 >>> not necessary if you have it already
- MagLDR
- MagLDR Repartition 300/ 45
...boot to magldr
- Magldr
- Service
- Boot source > ad sd
Hi everyone
I got a problem. When I try to install wp7 on my phone, after install the rom (ex.15 06 12 hd2o v2 02 wp7 8779 tango) and the reboot, the phone is stucking on HTC LOGO. I've tried to install different rom but the same problem. I'm not a rookie and i installed many roms. I noticed that, when i pull out the sd card, the system after reboot is booting up. But when i put the sdcard back, the system do not recognize it, and i do not have space to install anything. The same think is happening when i trying to install other wp7 roms. Never have any problem with my hd2 and flashing roms(android or wp7). My sdcard is 6class of speed Nokia.
Maybe some suggestions?
ps.
the sdcard is fine. Before i had the android with ext4 partition.
steps of my install over android:
1) flashing via wp6.5
2) formating sdcard via wp6.5 or using gparted ( the same effect)
3) task29
4) magdlr 1.13
5) use last 24mb or nand
6) usb flasher (ex. 15.06.12 HD2O© v2.02 WP7 8779 TANGO)
7) after flashing the phone is restarting
8) stuck on htc logo
which HSPL is installed?
also many problems is related with unsupported sdcards...
i wrote that. never have this situation before. the sd card was good on wp7 before. hspl is good too
No other error message? except that it's stuck on htc logo?
maybe give the method below (link) a try?
do it again
1. M-sd format in fat32
In Magldr. menu :
- choose Clear SD MBR press the green key(call key) to confirm
- choose uselast24Nand press the green key(call key) to confirm
...Then choose USB Flasher mode option #5 in magldr ....
...then ran the DWI file of Pdaimatejam Rom Wp7.5 Tango
Do it again.
i've done this 10 times.... nothing..
SDcard i good, earlier i had the wp7 on this card, i've tried to format it by canon 600d, nokia phone.... gparted, windows 7, nothing. After flashing and reboot , the phone stucks on HTC logo. But if I remove sdcard and reboot the phone, the system is loading, but there is no free space.
Similar problem here
I did everything according to the instructions, but after I flash WPH, and MAGLDR boots it up, it says I have no more free space. When I go to the Settings->About screen, it says 15mb total space, 0mb free.
Even though I have a 2GB, Sandisk Class 2... so I do a hard reset via Settings->About->Restart my Phone and it reboots. Now I'm stuck at the black HTC screen, after MAGLDR tries to boot my HTC phone.
Has anyone experienced this before? Is it my microSD? or is something else wrong with it?
yes, your sdcard not working...
go to setting-about-reset and do hard reset but dont let start boot wp7 (pull battery or boot to magldr)
or
pull sdcard and format it with old Nokia phone or SDFormatter (go to option and select Format size adjustment)
when card formatted put in phone and now boot to WP7...
Did it but...
It still doesn't work.. going to go get a sandisk 16GB class 2 then, and pray it works... there's always android if this still fails. Thank You!