Hi,
I have a problem with my hd2,
the boots constantly with WP7
I installed hspl2.08, 2.15er radio and MAGLDR112
what am I doing wrong?
've tried four SDCard
SanDisk 16GB
SanDisk 8GB
SanDisk 2GB
all class2
noname 2GB
have taken out the sd and can start as still the same problem. I can operate the mobile phone for about 30 seconds, then it boots again
Related
Hi Guys,
First off, thanks to everyone involved in the HD2 developement, it only took me an hour or so of reading posts to get android running on my phone
So, I'm having problems, and I think it's due to the memory card. I'm using the Scandisk 2GB (don't know class) that came with the phone (UK, o2). It has just enough space to run android so it'll do for now.
I tried changing my Radio from 2.12 to an earlier version, as my signal was cutting out in low-signal areas. I managed to brick the phone (used wrong version I think) and had to connect the SD card to my PC via card reader to get a different radio back on there.
When I connected it to windows, it said I had to format the card to be able to use it... It then formatted it at around 950mb, FAT32... After sorting the Radio and booting into winmo, I formatted the SD card which gave me 2GB again. I reloaded Android (I've now tried Mattc's froyosense 1.7 and mdeejays sense 1.3) and now everytime I unlock the SIM card, I get a series of errors:
The process com.htc.bgp has stopped unexpectedly. Please try again.
The application Stocks (process....
It'll loop through these errors untill I turn off the phone.
This was using Radio 2.10. I've just changed back to 2.12, which was running fine before, and I'm having the same issues. These started while I was using the Energy winmo rom, and I've tried it with ChunkyRom too (both vers of Android I have too).
Is this likely to be the SD card failing? I did see something about wiping the phone before flashing a new winmo rom, is this worth trying?
Cheers
Well, it looks like it is the SD card.
After a few more tries it's now getting to the HTC Quietly Brilliant screen and looping through the animation...
im guessing your running out of room on the card..
you said it only has 950mb free?
is that before or after the data.img file is created?
I have a problem too with a 8gb sdhc card i get the message failed to mount the sd card... I had formated it but i get the same error...With a 2gb card everything works fine!
It reporting a 2GB card as a 1GB card in windows basically. I've replaced it with a new 8GB card and all seems to be working well!
I recently mananged to upgrade to 3.14 ROM(official) so now I can run Android. I have 2 SD cards, one SanDisk 4GB(class 2, SDHC) and a Kingston 2GB(no class or SDHC written on it). Android boots just fine from the 2GB one, however when I try to boot the exact same build using the 4GB card, it shows the HTC/build logo and instead of the lockscreen/setup it reboots... I don't understand why it does this, they are identical. I used the 4GB one before(on my X1), it was formatted with 3 partitions, but I reformated with just one FAT32 partition. Should I reformat again and try? didn't work, it still crashes after the HTC logo..
Bump and update, I tried my 8GB card and that works fine(SDHC, class 2). However when I retried my 4GB card(formatted with 32kb allocation) it didn't work. I don't understand..
Im trying to use the android running fron the SD card from another post, the android is under development still, but or some reason it only works on my 2gb mem card and not my 16gb card. is it maybe because of the format?
the 2gb came with the phone, but i formated my new 16gb on the phone but it still doesnt work.
thanks
this is all on the htc hd mini (photon) btw
You just Format your 16GB SD to FAT32, and copy the Cotulla's Android to your SD then open Explorer on your phone, and tap on HaRET.
That is it.
Of me, the Android works, but it's too slow mine, microSD 8GB
i'm using an 16 gb microsd on my mini and it runs android very well (fast) and in my opinion any 16 gb card should work since 16 gb are relatively new and faster than the smaller ones .Keep trying ,format the card on pc ,i personally formated with the phone's formating tool
damn.. one of the times i tried it did the start up video (very slowy) and then froze, now just keeps freezing on the load bar agen. i formated it using the phone formater as its the only way i can. but still bein gay.
ive got a string feeling its due to the type of memry card, as my difrent branded 2gb one works fine, but when the android is eventualy 100% done i wont be able to have it all on my 16gb
ledavi said:
i'm using an 16 gb microsd on my mini and it runs android very well (fast) and in my opinion any 16 gb card should work since 16 gb are relatively new and faster than the smaller ones .Keep trying ,format the card on pc ,i personally formated with the phone's formating tool
Click to expand...
Click to collapse
what brand/make is ur sd card?
thanks
it's Kingmax 16gb microsdhc class 2 (first time took android about 20 minutes to boot and now about 3-4 minutes )
Mine is writen (microSD), 8GB
in my Android, for first time had takes about 2 hours and creates Data File, but second time it's will boot about 33 Minutes (too much, isn't?) and the android runs but it's slow. I formated the SD with many Format programs.. all of them same things, I also upgraded my WinMo but it was same.
I had HD2 with WP7 7720 4GB SD Card
Decide and bought 16 GB SD Card
Inserted it and when started phone it stucks after 1 2 3 4 5 GO GO GO
Reinstall WP7 Yuki 7720 with 16GB in
Now phone recognize 3,47 GB instead of 14.8GB
Any Fix ?
Is your sd card recognized by a computer? If so I would reformat the card.
when i bouught it i put it in a card reader
card have been already formatted but i perform format again
after i have install wp7 now windows can see it but neither opened it, neither formatted it
Try a hard reset again and see if WP7 picks up the rest of the space on the card. Of course, use the dev_storagelock cab to free up the card and see what you can do with it on your computer.
What kind of SD card are you using? WP7 is very picky.
My first card was a Kingston 4GB class 2 and it caused high battery drain.
My second card was a Kingston 16GB class 4 and it wouldn't even boot into WP7.
I'm now using a fantastic PNY 16GB class 4.
The brand/size/class of your SD card really matters.
try this
I had no proble with my Lexar 8GB Class4; then i tried my Mustang 16GB Class10 and WP7 stated that was incompatible.....
So I decided to make a try; inserted in my PC and run SDFormatter (from Panasonic) and made a full format (i.e. format full with erase ON) .
After that WP7 accepted my SD card, and apparently it is ok....hope it lasts...
anseio said:
Try a hard reset again and see if WP7 picks up the rest of the space on the card. Of course, use the dev_storagelock cab to free up the card and see what you can do with it on your computer.
What kind of SD card are you using? WP7 is very picky.
My first card was a Kingston 4GB class 2 and it caused high battery drain.
My second card was a Kingston 16GB class 4 and it wouldn't even boot into WP7.
I'm now using a fantastic PNY 16GB class 4.
The brand/size/class of your SD card really matters.
Click to expand...
Click to collapse
Well.
Micro SD Card HC Kingston Class 4 16GB
I think the problem is in the card.
When I try to format it with PC Windows 7 I can't normally to format it to NTFS
Only FAT32. Now trying different programs to format it, but when phone starts it freezes on logo about 10-20 minutes after that starts with error for SD Card.
Last I tryed is formatting card with Nokia E52. Leo starts wp7 normal but in Settings -> About only 50 MB free storage. I will try one2one69 what said.
butch_bs said:
Well.
Micro SD Card HC Kingston Class 4 16GB
I think the problem is in the card.
When I try to format it with PC Windows 7 I can't normally to format it to NTFS
Only FAT32. Now trying different programs to format it, but when phone starts it freezes on logo about 10-20 minutes after that starts with error for SD Card.
Last I tryed is formatting card with Nokia E52. Leo starts wp7 normal but in Settings -> About only 50 MB free storage. I will try one2one69 what said.
Click to expand...
Click to collapse
download and use Panasonic SDFormatter... Windows format utilities cannot help you
one2one69 said:
download and use Panasonic SDFormatter... Windows format utilities cannot help you
Click to expand...
Click to collapse
After Format program said that it cannot perform flash erase because of device?
Is this device is card reader?
Hello,
i know that this problem seems classic in the first view but i have a SD card problem.
I installed on my HD2 HD2O_2.00b5_8773. This installation failed close to the end with an error formation the partition 4.
Now When i start the HD2 it show an message :"Memory card not working...."
I read a lot on the forum a select a "compliant" SD card.
I bought 3 :
1- SanDisk SDHX class 4 16GB
2- SanDisk SDHC class 4 32GB
3- PNY SDHC class 4 32GB
none of these card are working...
Do you have suggestion ?
Regards
Michel4CE
sandisk must work.....
you not setup magldr ok if you get error during flashing...
try read this tutorial (No matter for version of ROM)
https://rapidshare.com/files/2232080081/ROM_install_Tutorial_v1.6.pdf
Tutorial
Hello,
MAGLDR113 was install on my box.
But will restart everything following you tutorial.
I wish something was wrong during the previous test...
thank you for your reply and to point me to this document.
Regards
Michel4CE
Michel4CE said:
Hello,
i know that this problem seems classic in the first view but i have a SD card problem.
I installed on my HD2 HD2O_2.00b5_8773. This installation failed close to the end with an error formation the partition 4.
Now When i start the HD2 it show an message :"Memory card not working...."
I read a lot on the forum a select a "compliant" SD card.
I bought 3 :
1- SanDisk SDHX class 4 16GB
2- SanDisk SDHC class 4 32GB
3- PNY SDHC class 4 32GB
none of these card are working...
Do you have suggestion ?
Regards
Michel4CE
Click to expand...
Click to collapse
I would highly recommend at least class 6 cards for any flavor of WP7. I've found any ROM running the DFT WP7 base, H2DO and Paj, are VERY picky about the SD card. I went back to the YUKI-XBMOD WP7 port, but was able to install H2DO and Paj and have the phone boot with a Lexar card.
As for your partition 4 issue, make sure you specify Uselast24NAND and ClearSD MBR inside Magdlr services. Also, would check the boards to see if the HD2 can even handle 32GB cards. I thought the HD2 was limited to 16GB.