Hi,
I have a GT-1000N Tab
I cannot flash Roto's JME because I loose the touchscreen, I suppose the drivers are different from european or usa Tabs.
On Samfirmware there is a JM2 for my Tab, but I don't want to end up with a signed bootloader.
My current firmware is P1000NUBJJ3, on Sam's the newest is P1000NUBJM2
I'd prefer to use Roto's. Do I flash Roto's with NUBJM2 kernel and modem?
If not, do I just delete the boot.bin and Sbl.bin from P1000NUBJM2?
On that .tar there is also a hidden.rfs and a .pit Do I leave them in?
Thanks!
Edit: One reason I want to use Roto's is to use XEU CSC
jgaviota said:
I'd prefer to use Roto's. Do I flash Roto's with NUBJM2 kernel and modem?
Click to expand...
Click to collapse
I haven't tested that configuration, but it may work. Theres no harm in trying.
jgaviota said:
If not, do I just delete the boot.bin and Sbl.bin from P1000NUBJM2?
On that .tar there is also a hidden.rfs and a .pit Do I leave them in?
Click to expand...
Click to collapse
The hidden.rfs may contain extra programs that you may want, but you can just remove it, as well as the pit, boot.bin and Sbl.bin.
If you have done a Roto Backup, perhaps you can post your boot.bin and Sbl.bin here for me to look at.
Thanks for stopping by Roto, I really admire all the work you are doing with the Tab!
I opened the hidden.rfs with UltraISO and it only contains data for some dictionaries, nice to have but not essential.
rotohammer said:
If you have done a Roto Backup, perhaps you can post your boot.bin and Sbl.bin here for me to look at.
Click to expand...
Click to collapse
I did do a Roto Backup, it saved me from having a Tab without touchscreen , btw would the same procedure work on a Galaxy S?
Attached are the stock boot.bin and Sbl.bin
Are all the hardware drivers in the zImage or are some files from the rest of the rom needed?
Related
i am asking this question bcoz i have flashed the official froyo for asia dxjpa
and the flashing way via odin was different cozz pit file 513 is used for flashing it.
so i wanted to know the right flashing way for ddjp6 froyo .. via odin
i downloaded the firmware ddjp6.. and it contains only one .tar file
so i just wanted to know the perfect flashing method
please dont advise me to do it through kies...
thanx
You can flash DDJP6 via odin the same way you flashed DXJPA without using any .pit file and it will work. As I have also flashed the other asian versions without using any .pit file (no .pit file recommended for firmwares with only one file on sam firmwares).
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Prasad007 said:
So How does the pit file affect anything ? I flashed DDJP6 with the .803 pit file. I take it that shouldn't be an issue ? Also, is the boot Galaxy "S" animation from the pit file ? I don't like the one I got from the asian froyo with the disjoint s... Does the Indian froyo have that too, or the one from eclair ?
Click to expand...
Click to collapse
Not sure about what exactly .pit file does but had a problem installing DXJPA earlier with .803pit (failed to flash) then tried with .513 and worked well.
haven't noticed the boot animation.
Did u move from 2.1 or unofficial 2.2?
i have a question..
if there is one tar file, should i put the file in just pda or PDA,PHONE AND CSc and then flash?
PDA for single tar file
jje
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
JJEgan said:
PDA for single tar file
jje
Click to expand...
Click to collapse
I clarification after flashing with Odin will all the setting & data reset to factory.
Or will all the personal data, Games, applications will remain.
One more thing if the Re-Partation in Unchecked (Not selected). Will the Odin keep my data as it is on the phone or it will reset to factory settings.
ragin said:
Check my signature if you want PDA MODEM & CSC seperately for DDJP6.
You can also try to use XXJPY PDA, JP6 MOEDEM & CSC.
Click to expand...
Click to collapse
Do you have the original PDA for XXJPY, the one you posted was with some change, I need the original JPY PDA file, Please give me the link
thanks..
so if i Root in the current jp6 im running, and it was updated by KIES, can i flash without removing the root by using ODIN?
And also i need to know possible best options to flash official firmwares.
I am on jm6 and decided to go jmc. i downloaded the jmc.
Q1: is can i delete boot.bin and cache.rfs from it and insert dbdata.rfs and then flash?
Q2: ofcourse with the permission of rotohammer can i change factory.rfs of the original package with the factory.rfs from the roto-jmc package?
Anybody ???
Ok here is the deal if you dont answer my questions i will not stop asking new ones
Q4: i see that csc file from jm6 contains cache.rfs and phone contains modem.bin but pda of jmc has all of them so can we put jm6 modem.bin and cache.rfs in pda tar and flash like that in odin or the opposite can we extract modem.bin and cache.rfs from jmc and flash them seperately by tar ing them indivicually?
kromosto said:
I am on jm6 and decided to go jmc. i downloaded the jmc.
Q1: is can i delete boot.bin and cache.rfs from it and insert dbdata.rfs and then flash?
Q2: ofcourse with the permission of rotohammer can i change factory.rfs of the original package with the factory.rfs from the roto-jmc package?
Click to expand...
Click to collapse
i do not recommend you to single flash boot.bin
all the other questions the others please....
abuser0815 said:
i do not recommend you to single flash boot.bin
Click to expand...
Click to collapse
actually i dont want to flash the boot.bin neither single nor multi
Still sont know the answers of these questions
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
You can use heimdal and just flash the modem.bin directly
Sent from my GT-I9000 using Tapatalk
creat0r79 said:
And I'd welcome info on how to flash it, should I put it in the phone field?
Click to expand...
Click to collapse
Don't put it in a TAR file. Just flash the modem.bin directly. Put it in the "PHONE" box. Make sure Repartition is unchecked and no other fields are filled.
After it's done, go to About to verify it flashed correctly. (Look at Baseband)
Done, running JPU modem on stock JPY...seems to also boot faster now
Thank you.
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
creat0r79 said:
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
Click to expand...
Click to collapse
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
cs_k said:
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
Click to expand...
Click to collapse
not required
seltaeb said:
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
Click to expand...
Click to collapse
they r not flashing .zip they are flashing modem.bin in ODIN. It works.
Anyone can make or write here a tutorial how to remove the bootloader from a ROM?(because of signing bootloaders)
In the thread which contains the patch for unsigning the bootloaders they mention to remove bootloaders (BUT HOW?) or flash "safe" custom ROMs
e.g.: like I want to install a STOCK samsung firmware through Odin or Heimdall, and I want to know which file(s) have to be removed.
open up the tar and remove boot.bin and sbl.bin and ur done
Do you re-tar the file?
rangercaptain said:
Do you re-tar the file?
Click to expand...
Click to collapse
If you want to flash it via Odin. Otherwise you can just use Heimdall.
Sent from my AT&T Galaxy Tab using XDA App
caveman999 said:
If you want to flash it via Odin. Otherwise you can just use Heimdall.
Sent from my AT&T Galaxy Tab using XDA App
Click to expand...
Click to collapse
Sound nice!!!! isn't it???
Did you do it by yourself yet?
KC
Have you read this news?
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my Galaxy Tab Baby
If you are flashing with Heimdal, then just leave out the boot.bin and sbl.bin files and you'll be okay. If you want to flash with Odin you will need to open up the tar file and delete these two. Be careful with doing this as tar files modified in Windows don't always flash properly with Odin, you need to use Linux to tar the files up to be sure it will work okay. I have Cygwin on my Vista PC and use this to tar up files for flashing with Odin and it works fine. I pull all the files out of the tar then re-tar the ones I want to flash. I've done this for removing bootloader files and making mix and match files of different pda, csc and modem versions successfully.
I would be interested to know if anyone knows of a Windows program that can be used to create tar files that are flashable with Odin??
fcarmona said:
Have you read this news?
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my Galaxy Tab Baby
Click to expand...
Click to collapse
I'm pretty sure he did, he linked to it in his first post...
bdl1969 said:
... Windows don't ..., you need to use Linux
Click to expand...
Click to collapse
AMEN...
Sent from my Galaxy Tab Baby
Rogers Captivate SGH-i896 Stock 2.2 [Froyo]
Flash this ROM at your own risk. I cannot be held responsible for what you do on your device.
Included in the Odin flashable file (which must be unzipped first) are:
cache.rfs
dbdata.rfs
factoryfs.rfs
modem
param.lfs
zImage
I left the boot.bin and sbl.bin out to make for a safer flash. The other Rogers 2.2 Stock ROMs posted on XDA are missing dbdata.rfs and param.lfs, leaving you with an AT&T or SGH-i897 boot screen if you flashed something with them previously. Nothing has been added or removed feature/app-wise, so flashing this ROM will give you a true and complete Rogers stock 2.2 experience.
If you are new to flashing ROMs, please read the following threads before flashing! They will answer most, if not all, of the general questions you may have.
The Captivate Directory |Stickies|Guides|ROMs|Themes|Rules|Etc.| READ BEFORE POSTING
[GUIDE] How to Install a custom ROM *NOW WITH VIDEOS*
ALWAYS BE PATIENT THE FIRST TIME THE DEVICE BOOTS AFTER A FLASH!!
DOWNLOAD LINKS
I896UXJL1-stock.zip (171.86 MB) - Mirror 1 - Over 5000 downloads!
Odin3 v1.81 with 512.pit (198.41 KB) - Mirror 1
Odin3 v1.85 with ext4 pit (198.9 KB)
If you're looking for 2.1, Trusselo created a thread with my Rogers 2.1 stock ROM which can be found here.
Or you can just download it here.
.
reserved
10char
Thanks
ottawadad34 said:
Thanks
Click to expand...
Click to collapse
You're welcome.
nzahorchak said:
Rogers Captivate SGH-i896 Stock 2.2 [Froyo]
Flash this ROM at your own risk. I cannot be held responsible for what you do on your device.
Included in the Odin flashable file (which must be unzipped first) are:
cache.rfs
dbdata.rfs
factoryfs.rfs
modem
param.lfs
zImage
I left the boot.bin and sbl.bin out to make for a safer flash. The other Rogers 2.2 Stock ROMs posted on XDA are missing dbdata.rfs and param.lfs, leaving you with an AT&T or SGH-i897 boot screen if you flashed something with them previously. Nothing has been added or removed feature/app-wise, so flashing this ROM will give you a true and complete Rogers stock 2.2 experience.
If you are new to flashing ROMs, please read the following threads before flashing! They will answer most, if not all, of the general questions you may have.
The Captivate Directory |Stickies|Guides|ROMs|Themes|Rules|Etc.| READ BEFORE POSTING
[GUIDE] How to Install a custom ROM *NOW WITH VIDEOS*
ALWAYS BE PATIENT THE FIRST TIME THE DEVICE BOOTS AFTER A FLASH!!
DOWNLOAD LINKS
I896UXJL1-stock.zip (171.86 MB) - Mirror 1
Odin3 v1.81 with 512.pit (198.41 KB)
If you're looking for 2.1, Trusselo created a thread with my Rogers 2.1 stock ROM which can be found here.
Or you can just download it here.
.
Click to expand...
Click to collapse
Is it as easy to root as 2.1?
Right now I have a rogers phone, but I have onclicked stock many times, so I have the ATT boot... Running CM7, can I get boot.bin and somehow safely flash it to get the real samsung boot back?
So this comes with the 3e recovery right?
@nzahorchak
Could you please upload boot.bin & sbl.bin for the people here who know how to use them and are in need? Thanks!
ratatouille said:
Is it as easy to root as 2.1?
Click to expand...
Click to collapse
2.2 has 3e recovery with signature verification, which can make it more difficult, but it is still doable. You can get 3e recovery without verification here.
slayp00n said:
Right now I have a rogers phone, but I have onclicked stock many times, so I have the ATT boot... Running CM7, can I get boot.bin and somehow safely flash it to get the real samsung boot back?
Click to expand...
Click to collapse
I, as well as others, have gotten rid of the AT&T boot screen from the one-click odin by flashing this without boot.bin or sbl.bin. Have you tried flashing this yet?
Elisha said:
So this comes with the 3e recovery right?
Click to expand...
Click to collapse
Yes, stock 2.2 comes with 3e recovery.
BTTNext said:
@nzahorchak
Could you please upload boot.bin & sbl.bin for the people here who know how to use them and are in need? Thanks!
Click to expand...
Click to collapse
I will see if I can find them and upload them when/if I do.
Cool. Thanks!
Does this one come with the APN settings that the 2.1 version lacked?
apparition said:
Cool. Thanks!
Does this one come with the APN settings that the 2.1 version lacked?
Click to expand...
Click to collapse
No. You'll have to input them manually, or install a new rom over it, settings will be back. (They were when I installed Precision)
Thanks a lot man, I have been looking for ways to get back to stock when needed. Especially now rumors spreading we may get gingerbread soon.
One question tho, only Odin version and no cwm?
Thanks again
Sent from my SAMSUNG-SGH-I897 using XDA App
Awesome stuff!
apparition said:
Cool. Thanks!
Does this one come with the APN settings that the 2.1 version lacked?
Click to expand...
Click to collapse
Unfortunately, no. I don't think the 2.2 Kies update contained a dbdata.rfs (I couldn't find one), so I used the same file for both ROMs.
jackjack078 said:
Thanks a lot man, I have been looking for ways to get back to stock when needed. Especially now rumors spreading we may get gingerbread soon.
One question tho, only Odin version and no cwm?
Thanks again
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
No, sorry, just Odin or Heimdall if you extract the files from the .tar.
I, as well as others, have gotten rid of the AT&T boot screen from the one-click odin by flashing this without boot.bin or sbl.bin. Have you tried flashing this yet?
Don't want a full flash though, just want to flash the boot so that I do not have to go through reinstalling CM7
slayp00n said:
I, as well as others, have gotten rid of the AT&T boot screen from the one-click odin by flashing this without boot.bin or sbl.bin. Have you tried flashing this yet?
Don't want a full flash though, just want to flash the boot so that I do not have to go through reinstalling CM7
Click to expand...
Click to collapse
There are several tutorials on how to do this throughout xda, including this one: http://forum.xda-developers.com/showthread.php?t=717322
The boot screen can be extracted from the param.lfs file, if you can't find it posted somewhere.
nzahorchak said:
There are several tutorials on how to do this throughout xda, including this one: http://forum.xda-developers.com/showthread.php?t=717322
The boot screen can be extracted from the param.lfs file, if you can't find it posted somewhere.
Click to expand...
Click to collapse
this is not for the bootloader screen, it is the bootanimation.
slayp00n said:
this is not for the bootloader screen, it is the bootanimation.
Click to expand...
Click to collapse
Then do a forum search for what you're looking for, if you haven't already. This thread is for the sake of flashing back to Rogers 2.2 stock. Unfortunately, I cannot help you further. The Rogers boot screen and animation are not in the bootloaders, hence why they are not needed in the ROM to remove the AT&T boot screens/animations.
Can't get into download mode with volume up + volume down + usb insert. Was trying to use odin to flash jf6 2.1 with 2e. Any other way to get to download mode?
f*ck never mind didn't have 3 button download, damn got to buy a jig now..