Hey,
for some reason, I can't use the microphone on any earphone/headphones with an inline mic. The audio output is fine, I can hear the sounds through my earphones. The mic, however, does not work. The main play/pause button on my earphones work as well, but the volume buttons don't.
Weird thing is, even the earphones that come with the G2 does not work, this is obviously a software problem. Is there a known fix or is there an app or something I can download to fix this problem?
Some specific problems:
sometimes when I am calling someone and I use my headphones, the mic on the phone stop working. I'm assuming the phone detects that an earphone with a inline mic is plugged in, thus turning off the one on the phone, but obviously this just ends up with them not being able to hear me at all.
In the sound recorder(where I have been checking whether the mics were working or not), the recorder doesn't detect my mic on the earphones, but it "hears" everytime I press a button on the inline mic which is interesting.
Hopefully someone has gotten this to work. I'm running CM 6.1, the specific earphones I'm trying to get working is skullcandy 50/50s (which is meant for iphone, but i've heard that iphone earphones work too). Any help would be appreciated,
Thanks.
That's been an issue for some people. My old wired headset that came with my Cliq does the same thing - audio mic is bypassed and mic on the phone is used instead.
The wired headset that came with the G2 works fine for me though. Tested it every which way with my wife on the phone and always got audio with the headset mic.
Sent from my T-Mobile G2 using XDA App
skeptical, I tried using the one that came with the G2 again, and magically it worked. I know that the whole audio/mic thing is still buggy, I probably tested it before when it was acting up. Looks like a lot of people are having success with skullcandy's FMJs so I think i'll go try them out.
I had a similar issue and I heard that wired headsets (iphone compatible) work on Stock, so I nandroided and went back to stock from Cyanogen and the headset mic worked fine, so it might be a cyanogen specific issue.
Related
hi,
I have been using a Nokia phone with a 3.5 mm audio jack to connect it to my aux-in of the car and listen to music as well as make or take calls. The phone mic picks my voice quite well and I hear back the calling party through the car speakers.
Does the same work with HTC Touch HD too?
Update: I have connected the HTC Touch HD to my car's Aux in and it works well with the THD's mic picking up my voice easily. I had echo on a couple of calls but would like to check for its recurrence to believe that's some problem with unit or with the connectivity.
Afraid not mate.
When you plug something in the earphone socket, it assumes there's a mic plugged in too, like when you plug in a hands-free kit.
I've got exactly the same setup and didn't click what the problem was the first time I took a call. I just sat there like a pratt, shouting "HELLO" at my phone! lol
There may be a software workround for this, but not that I'm aware of.
I use the same approach.. but currently even though I am using a Belkin cable to a pretty neat deck.. the sound is completely off.. Treble is too high.. and My faithful kenwoods which would handle the full Volume of my N95-2 with ease are now cracking up.
Any ideas??
I use the same approach.. but currently even though I am using a Belkin cable to a pretty neat deck.. the sound is completely off.. Treble is too high.. and My faithful kenwoods which would handle the full Volume of my N95-2 with ease are now cracking up.
Any ideas??
Ideally, you should have the phone volume at about 75% of its max (between the phone volume itself, and the volume on the music player application), and control overall volume from the deck. If it still sounds dodgy after that, mess about with the equalizer on whatever player you're using, or the htc audio booster.
If anything, mine's a little quiet, but I've not tried messing with output volume settings in Tweak HD. I tend to have to have my deck turned up about 70-80%, whereas I normally have the radio at about 20-30%.
johncmolyneux said:
Afraid not mate.
There may be a software workround for this, but not that I'm aware of.
Click to expand...
Click to collapse
Asking this question to all. Is anyone aware of any software to use HTC Touch HD mic while using a 3.5 mm headphones through its audio jack.
not both speakers and mic are off when in headset mode
it's a hardware thing
but like with htc headsets you can connect external speakers and mic to the conntors and it works
easy way is to tear the headset apart and solver in the stuff you want to the connector which came with the headset
johncmolyneux said:
Afraid not mate.
When you plug something in the earphone socket, it assumes there's a mic plugged in too, like when you plug in a hands-free kit.
I've got exactly the same setup and didn't click what the problem was the first time I took a call. I just sat there like a pratt, shouting "HELLO" at my phone! lol
There may be a software workround for this, but not that I'm aware of.
Click to expand...
Click to collapse
Mine works fine setup like this. I've got a 3.5m jack coming out and going into the back of my headunit. I can make calls without a problem. The phone seems to realise the connected jack doesn't have a mic so uses the internal one.
The first time I tried it though the person at the other end couldn't hear me but finally worked out this was because the cradle I was using was blocking the mic on the bottom of the phone! I quick readjustment of the cradle and everything was fine.
Sound quality when playing tunes has always been fine but the voice quality aint that great, the person at the other end sometime complains about echo.
crankshaft said:
The phone seems to realise the connected jack doesn't have a mic so uses the internal one.
Click to expand...
Click to collapse
Hmm.... I'll have to have a play with that then, as it was a total failure for me previously. I definitely didn't have the mic blocked, as my cradle holds the phone by the sides.
Cheers for that - I'll have a play about.
How about something like this?
http://www.overstock.com/Electronics/Audio-3.5-mm-Adapter-with-Microphone-for-iPhone/3440143/product.html?cid=133635
(iPhone example but googling "3.5mm microphone output" finds you more, all about £3)
"How about something like this?"
there is not standart for how 3.5mm jacks with mics work as in the width of the ring and such
doubt very very very much that iphone converter would work with anything but an iphone
Thats a good idea. I havent tried this myself but its not experience that the hadware needs an attached mic when plugging the 3.5mm into speakers. I use high quality headphones with no attatched mic to listen to music on the HD and can take calls via the phone or skype by using the headphones and the phone mic.
crankshaft said:
Mine works fine setup like this.
Sound quality when playing tunes has always been fine but the voice quality aint that great, the person at the other end sometime complains about echo.
Click to expand...
Click to collapse
Same setup as me for the last 12 months. I have to play around with the volume setting on the HU / HD all the time - its not ideal but the internal mic seems to pick up voice fine (and echo!).
I just bought some M9Ps with a built in mic, and they don't even work with this phone. You have to hold the mic button to get clear sound, and when trying to make a call it automatically ends unless you hold the mic button the whole way. Then the person can't even hear you..
Is there a fix to this? I REALLY don't like the default headphones.
There is no fix. You could have known about this issue if you read the accessoires board, because the problem has been documented there.
I bought the M9P's too by the way. I returned them for the regular M9's.
well so what does that mean?
that it wont work?
well i flashed back to di18 and works perfectly wit no issues mic works n so do the headphones onthe headset
now when im in dk28 headphones work but not the mic :/
something ****ed up in the kernel?
Well look on the bright side. You can speak into the phone's mouthpiece even though your earphone is plugged in. =D
I am having the same problem, when you say flashed back to di18 what do you mean? Is that a certain custom rom? Any help would be greatly appreciated.
+1 on this, skullcandy holua's does the same thing, works great on my mw600 but not when plugged directly into the phone. What are you flashing back to fix?
daang i have the same problem with my skullcandy buds Is it because I am on cm 6 + 2.2?
Hi all...
My daughter has a ZTE Blade that I flashed originally to a custom rom running Froyo... for Xmas she got some new headset in ear headphones (one's with a mic)... The sound through these when plugged into the Blade is similar to listening to music underwater (muffled and echoing).... if you press the mic button the volume increases but is still poor quality. However plug in a normal earphone 3.5 connector (two bands rather than three) and everything sounds fine... I tried the earphones on other phones/computers and there is definitely nothing wrong with them. We also bought a second pair for my other daughter and they were exactly the same, I then tried my supplied Samsung Galaxy SII headset... again same thing... muffled and echoing sound.
So the problem was with the phone.
I decided to re-flash the phone this time with a Gen 2 Cyanogen Gingerbread rom... I tried the audio again after flashing and it seemed to have been fixed (admittedly I only played a track for a few seconds). Over the course of the day my daughter has reinstalled her apps etc... went to listen to some more music and again the same problem... muffled and echoing sound - pop in some normal headphones and everything is fine.
I have searched around and the problem seems to have come up before a few times but no one has really been able to track down what the issue is. I was actuallt thinking it might be app related (Skype or Tango for example) but I have stopped (not uninstalled yet) these apps but it makes no change.
So it seems that the Blade will not work with any wired headset/mic - any idea's please?
I found it wouldn't work with a headset that has a mic on it, but I got it working fine with my £5 jvc gummi headphones although I'm not getting much in the way of sound quality and volume. Still miles better than the stock headphones in the box though
Sent from my ST18i using XDA App
I know this is an old topic but I found the solution and some others may have the same problem:
There are two kinds of connectors, they have ground and mic signal switched.
If you get the wrong one it will work but sound (mostly speech) will be very bad, this results in a very poor audio quality.
So just get the correct ones (Apple-Style) with mic or the ones withour mic will also work fine.
http://en.wikipedia.org/wiki/Phone_connector_(audio)#Mobile_phones
Is this a known issue? I am on AOKP rom but have noticed this issue on AOSP, as well. Can anyone who has a stock or stockish rom verify that your headphone mic is working correctly?
I have had 2 calls one on each rom where i used my headphones and the person said they could barely hear me. If i bring the phone near my mouth the user indicates i sound great. When i place the phone away from me they have a hard time hearing me.
Is anyone else having an issue with this? I cannot use mics built into any headphone i use. Tried this on CM. Went to Malladus. Even does it when you go into record. No sound when speaking into headphone mic but when speaking into phone mic, meter moves.
Darkestred said:
Is anyone else having an issue with this? I cannot use mics built into any headphone i use. Tried this on CM. Went to Malladus. Even does it when you go into record. No sound when speaking into headphone mic but when speaking into phone mic, meter moves.
Click to expand...
Click to collapse
Looks like certain headphones at the current time do not work with this phone. I used Brainwavz m5 and pro alpha's. The mic on the earpiece does not work. I then tried a pair of phonak pfe122s with inline remote. The mic on that worked.
The inline mic on my beats earbuds and my skullcandy aviators both take precendence over the phone mic, I'm completely stock VS980.
Hi,
I have a pair of xiami piston headphones and they work fine with my older phone (galaxy s3) but with my 6P they are not detected by the phone. I can't use them to listen to music or make calls.
I tried a pair of generic headphones and they do work. Is there some headphones that are simply incompatible with the device?
Yes I had the same experience. My samsung headphones from my galaxy s5 can't be used to make phone calls and if you try to use the volume adjustment buttons it pauses playback. Another pair of off-brand headphones I bought at duane reade work just fine for making calls. It is strange because w/ my galaxy I could use apple headphones or really any brand and they all worked fine. They should all work exactly the same.
I just hope this is a software compatibility issue with the in-line mic/controls and not a hardware issue. I have three pairs of pistons 2's that I used on a regular basis with my oneplus.
chowhoundb said:
I just hope this is a software compatibility issue with the in-line mic/controls and not a hardware issue. I have three pairs of pistons 2's that I used on a regular basis with my oneplus.
Click to expand...
Click to collapse
I have found the same issue...hopefully software.
+1
My V-Moda Crossfade LP2s are unable to control anything on the 6P, where they worked just fine on the LG G4
I was able to get my Piston 2 working by holding the VOLUME DOWN button while pluging them. but the controls on the cable do not work. but I have sound at least.
clongetty said:
I was able to get my Piston 2 working by holding the VOLUME DOWN button while pluging them. but the controls on the cable do not work. but I have sound at least.
Click to expand...
Click to collapse
That's odd that audio would completely fail.
I just tried another headphone pair I have. They are Klipsch Image S4i and the middle button works, even though these are iPhone specific headphones (hence the i in the name). The volume buttons on it don't do anything.
havanahjoe said:
That's odd that audio would completely fail.
I just tried another headphone pair I have. They are Klipsch Image S4i and the middle button works, even though these are iPhone specific headphones (hence the i in the name). The volume buttons on it don't do anything.
Click to expand...
Click to collapse
Isn't there an app that can remap the "input" it sees from the headphones?
I'm encountering issues across ALL headphones with inline buttons, including Sony, Beats, and the Project Fi headphones. I'm on my second device now (RMA'd the first to see if it was device-specific), and all exhibit the same issue: double-click to skip track fails when the device is locked after a certain number of presses, and recogntion of the inline button is generally sporadic when the device is locked.
HOWEVER! Everything is perfect when the device is unlocked! So this has to be a software issue, right?
i'm having issues where the headphones seem to be working, but the mute button is not muting the headphones (but they do mute the call). so i hear EVERYTHING in my ears. its like a weird loopback.
The_Middleman said:
I'm encountering issues across ALL headphones with inline buttons, including Sony, Beats, and the Project Fi headphones. I'm on my second device now (RMA'd the first to see if it was device-specific), and all exhibit the same issue: double-click to skip track fails when the device is locked after a certain number of presses, and recogntion of the inline button is generally sporadic when the device is locked.
HOWEVER! Everything is perfect when the device is unlocked! So this has to be a software issue, right?
Click to expand...
Click to collapse
There was a thread about this, maybe it was you who posted it.
My S4i headphones can control music (pause/unpause) with the screen off. I have Smart Lock enabled with my Moto 360 though, so not sure if that makes a difference. I also finally updated to MDB08L this morning. I was stuck on MDA89D until I manually sideloaded the MDB08K OTA (then the MDB08L OTA was downloaded by the phone).
I just tried my V-Moda Crossfades and those still are not able to control anything with the screen lock or unlocked (last time I had used them was before the software update)
---------- Post added at 11:37 AM ---------- Previous post was at 11:37 AM ----------
640k said:
i'm having issues where the headphones seem to be working, but the mute button is not muting the headphones (but they do mute the call). so i hear EVERYTHING in my ears. its like a weird loopback.
Click to expand...
Click to collapse
That sounds like a feature I might like to enable sometimes at work, but it would be annoying when trying to isolate everything around me!
havanahjoe said:
That sounds like a feature I might like to enable sometimes at work, but it would be annoying when trying to isolate everything around me!
Click to expand...
Click to collapse
it wasn't such a nice feature as i was walking from my car and the mic was rubbing on the zipper of my jacket and i could hear it and the wind in my ears. if i covered the mic with my hand, the sound went away, so it seems like there is definitely a software issue.
640k said:
it wasn't such a nice feature as i was walking from my car and the mic was rubbing on the zipper of my jacket and i could hear it and the wind in my ears. if i covered the mic with my hand, the sound went away, so it seems like there is definitely a software issue.
Click to expand...
Click to collapse
I get that when using the Klipschs, but it's the vibration traveling through the wire and into my ears (since they are in-ear headphones), and it is annoying.
i use Apple EarPods. $29. love them.
My Xiaomi Pistons were the only set of headphones that didn't work at all (music played through front-facing speakers and not the headphones). All other headphones I own seem to have the same compatibility issues as all other Android headsets vs iPhone made headsets in regards to the in-line buttons working or not.
I hate in-ear/noise-cancelling/over-ear options since I use headphones while walking around the city and still prefer to still hear what's going on around me. Apple EarPods work but the in-line volume buttons don't work. Play/Pause/Answer/End button works fine though. My only other option that I've discovered is the Amazon Fire Headset. They are similar pods that don't isolate sound and all buttons on the headset work fine.
RG129 said:
My Xiaomi Pistons were the only set of headphones that didn't work at all (music played through front-facing speakers and not the headphones). All other headphones I own seem to have the same compatibility issues as all other Android headsets vs iPhone made headsets in regards to the in-line buttons working or not.
I hate in-ear/noise-cancelling/over-ear options since I use headphones while walking around the city and still prefer to still hear what's going on around me. Apple EarPods work but the in-line volume buttons don't work. Play/Pause/Answer/End button works fine though. My only other option that I've discovered is the Amazon Fire Headset. They are similar pods that don't isolate sound and all buttons on the headset work fine.
Click to expand...
Click to collapse
mine didn't work as well. however, my amazon ones worked and i could also use vol up and pause, but vol down wasn't working.
So now my headphones are working apparently, the inline mic controls, pause/play volume up and down now work.
Using the Sennheiser Mm30g.
The Bose QC25s work like a charm along with the inline controls.
But...you need to buy the "made for Android" version.
I also have the pistons and they no longer work
My jaybird bluebirds x work perfectly. Need to test in my Lexus, however, pairing went fine so expect it will be ok.
Sent from my Nexus 6P using Tapatalk