Related
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
mobilemidget said:
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
Click to expand...
Click to collapse
Did u delete the name on the recoveryname.img upon flashing??
Sent from my HTC Vision using XDA App
Download Root Explorer and navigate to /system/bin
Make sure /system is mounted in r/w then take this attached file, unzip it, and place it inside of /system/bin
Go back into terminal and try that command again.
ok so I installed root manager, and put the flash_image.zip in the system/bit, and tried it again with the terminal emulator, but i still have no results, it says after the pause when you plress enter after the flash_image prompt, your supposed to reboot the phone and it should start with the new recovery, but when i open ROM manager it staill shows V 2.5.... If i did somthing wrong i cant figure it out., Please help.
Thanks
http://www.youtube.com/watch?v=w4QViSam2og&feature=youtube_gdata_player
Follow these instructions. You can't go wrong. Make sure you back out of the app and go back in. It sets the cursor to the correct posistion. All you have to do is put the .img in the root of your sd. Hope this helps, it did for me.
Sent from my HTC Vision using XDA App
wait, so why aren't you just flashing the recovery through ROM manager? Are you trying to install CWR 3.0+?
yes I am trying to flash cwm 3.0, and it is not an option with ROM manager. I will try the Youtube instructions. Thanks
Ok so I tried the instructions with the Youtube video, and when i do the cmd promt in Terminal i get this;
Cant open device: "/dev/block/mmcblk0"
error in reading mbr!
failed with error: -1
I have the recovery.img file (not zip) on the sd card, I used root mamnager to put it in the bin file within system. but the instructions on the video say to use astro and it doesnt give an option to go as deep as root manager.
Thanks
Yes unzip it but make sure its in the root of your sd. That means not folders at all. That's the command that he is making in the video. I don't think you can flash cwm 3.0 in rom manager, only revert back to earlier recoveries, for froyo roms.
Sent from my HTC Vision using XDA App
Make sure the file is named what your commanding it to be. Make sure its recovery.img no caps.
Sent from my HTC Vision using XDA App
OK so I am trying this too. I am putting the recovery image directly to the root of my sd and I can see that it's there. But in TE, I put in the commands and it tells me
flash_image: not found
It's there!!!! I can see it when I have my phone connected. What am I doing wrong?
Edit: I am running stock rooted. Does this have something to do with it?
Rooted running a stock rom? Honestly I can't tell you all I know is I'm running custom rom. If I had to guess I would say it doesn't. All I can say is I had issues until I watched the video, sorry I can't help more. Only thing I would say to do is wipe everything you did and try redoing it.
Sent from my HTC Vision using XDA App
I can say you should only have one .img in your sd to not confuse it. I'm pretty sure you can use command prompt on your pc if you have access to one.
Sent from my HTC Vision using XDA App
Ok, I think I am getting somewhere, I was searching my sdcard on my computer, and I realised that the root of my sdcard is not called "sdcard" so in the command i was doing it wrong, It is called "HTC DESIRE" so i did it in Emulator and it worked i rebooted my phone in recovery and I am now rocking the new ClockworkMod Recovery 3.0.0.5...
Thanks all for the help, Hope what i discovered helps someone else.
Wait, Wait, Wait... I just screwed it up again... I went into ROM Manager after I successfully flashed 3.0.0.5. and it was not showing that in ROM Manager, so I tapped on flash latest recovery, and damnit... it replaced all my hard work with the 2.5 recovery... I have tried to repeat the flash process a few times with 3.0, and i have not been successful... Help... I dont know what to do now!!!
Instead of flashing the recovery in rom manager, after you've inputted the
su
# flash_image recovery sdcard/recovery.img
you can just type in after it
# reboot recovery
and it will reboot you into CWM 3.0. Be sure to perform a nandroid backup under 2.2 first and when you want to go back to a froyo rom, you'll have to flash the 2.5 recovery image again.
Yes, you will not see it in rom manager. Just reboot into the recovery and if you see orange and cwm 3.0 your good. Just repeat the steps.
Sent from my HTC Vision using XDA App
mobilemidget said:
Hey, I am trying to successfully get a new ROM, and in all the forums and such I have read tell me that with the Desire Z/G2 I need to flash the newest ClockWorkMod recovery. So i have downloaded a couple different recovery .img files.
Now when i use Emulator, i put in;
su
flash_image recovery /sdcard/recoveryname.img
and it says
flash_image: not found
I dont understand why ROM Manager doesnt give the newest recovery file as an option.
Can anyone help me in this situation?
Thanks
Click to expand...
Click to collapse
"flash_image: not found" means that you do not have the 'flash_image' binary installed. Follow the guide here to get 'flash_image' installed on your device (the 'flash_image' binary is attached).
As for why ROM Manager not giving the newest recovery as an option, ROM Manger isn't fully compatible with the latest recovery as it just came out. The latest recovery (I'm assuming you're referring to v3.x) is only for Gingerbread based ROM's, if you're trying to install a Froyo based ROM then you should be using recovery version 2.x.
OriginalGabriel said:
"flash_image: not found" means that you do not have the 'flash_image' binary installed. Follow the guide here to get 'flash_image' installed on your device (the 'flash_image' binary is attached).
Click to expand...
Click to collapse
I will try this tonight, thank you. I haven't run into this in any of the tutorials I've read though. I appreciate it.
Hey everyone I found a site that shows me how to flash CWM 3.0 through ROM Manager,
http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-3-using-rom-manager/
However, it is not working for me, if anyone has been successful in doing it this way please let me know cause evrything i try this i still am left with CWM 2.5. I really want to try the new Cyanagen nightly ROM, but i need to have 3.0... I had it once when i was doing it through terminal, however stupid me went back into rom manager and ruined what i did, and could not redo it... i am getting frustrated.
Please Help me.
Thanks
Hey i'm trying to root my Rogers Dream via this method...
http://wiki.cyanogenmod.com/index.php?title=Rogers_Dream:_Rooting_(Post-911_Patch)
My problem is after completing the whole process I am still not rooted.
I think that nothing happens when i do this part...
chmod 666 /dev/mtd/mtd1
flash_image recovery /data/local/recovery.img
are there suppost to be messages after I type those in?
Basically after the whole process i can't get into recovery, and i do not have su permissions.
Thanks for any insight!
For your link, it says: "There is no text on this page".
Anyways, download RC7 (not RC29), sign in, download telnet from market, then when you have recovery.img on sdcard type in:
su
flash_image recovery /sdcard/recovery.img
and you should be rooted.
OR
follow these directions: http://theunlockr.com/2010/04/26/how-to-root-the-htc-g1dream/
OR download oneclickroot and root it that way to access "su" and flash recovery
Thanks I'll give those a try anyways heres the fixed link
http://wiki.cyanogenmod.com/index.php?title=Rogers_Dream:_Rooting_(Post-911_Patch)
e334 said:
For your link, it says: "There is no text on this page".
Anyways, download RC7 (not RC29), sign in, download telnet from market, then when you have recovery.img on sdcard type in:
su
flash_image recovery /sdcard/recovery.img
and you should be rooted.
OR
follow these directions: http://theunlockr.com/2010/04/26/how-to-root-the-htc-g1dream/
OR download oneclickroot and root it that way to access "su" and flash recovery
Click to expand...
Click to collapse
Ok the unlockr method does not work for me.
The HTC Dream is not on the compatible list for oneclickroot can anyone confirm it working?
Where can I find RC7?
have you tryed this app
http://forum.xda-developers.com/showthread.php?t=747598
just install it with a file manager and run it and you should be rooted after that download rom manager from market and install a custom recovery from there
^__^
I finally managed to get the custom recovery flashed! thanks to the xda guide
http://forum.xda-developers.com/wiki/index.php?title=Rooting_HTC_Branded_EBI1_Dreams
If I managed to flash the recovery, does that mean i have root?
Can someone please explain how to do this part? I just get an error...
run the following two fastboot commands (this will prevent issues flashing your rom)
fastboot erase system -w
fastboot erase boot
Click to expand...
Click to collapse
Will anything happen if I do not do this step?
EDIT: Seems I have root now after the app root, flashed cyanogen waiting for it to boot.
aw man you just destroyed my will live.
I was reading this entire post with intense anticipation and was thoroughly let down when I did not see you post a successful root
Any updates on this?
I just purchased a Rogers Dream to learn about rooting and to play with.
If you did have success with this tutorial could you let me know? http://forum.xda-developers.com/wiki/index.php?title=Rooting_HTC_Branded_EBI1_Dreams
I was considering following this tutorial myself!
Cheers
@bourne-nolonger
I used that method a little while ago with no issues.
The steps are easy to follow and work without issue.
Yes i was successful with XDAs procedure
My will was almost destroyed... i traded my magic for this dream... but now im happy
awsome!
thanks for the feedback guys.
definitely looking forward to finally getting a chance to root my G1.
Will report my results!
Cheers
quick question.
in the wiki under "D - Installing an engineering SPL" step 11 says to
Code:
"powerdown - fastboot oem powerdown"
I was wondering what exactly is meant by this?
I looked at fastboot.exe but none of the command line options seem to have a "powerdown" option. They do however have a reboot/reboot-bootloader, is this what step 11 is referring to?
Sorry I should also ask: Can I follow the wiki that describes how to flash CM5+ to flash CM6.1.0? Is the process the same basically between the two versions of CM?
I want to try 6.1.0 instead of going with 5+
Cheers
bourne-nolonger said:
I was wondering what exactly is meant by this?
I looked at fastboot.exe but none of the command line options seem to have a "powerdown" option. They do however have a reboot/reboot-bootloader, is this what step 11 is referring to?
Click to expand...
Click to collapse
That is because its the oem command and the second option (powerdown) is up to the phone to parse..
Once you run 'fastboot erase system -w' and return to recovery you can install any rom you wish just make sure you have an ebi1 kernel.
You also may wish to check out the 2708+ compatible kernel thread to get some extra ram, warning however if you are a rogers customer you will need to sign the e911 wavier before you can switch to any other radio otherwise they will cut your data service.. if you are with another carrier there is no such requirement.
Thanks for explaining step 11. Not sure I fully understand, but I'll do some additional reading.
I was looking at some of your threads before. I thought the 15mb ram expansion wasn't available for the rogers dream?
This is my first time flashing, could I flash cm first then maybe try yours later?
The g1i have luckily isn't my main phone. I bought it just to get comfortable with rooting and flashing.
Cheers
Sent from my Nexus One using Tapatalk
I managed to successfully root and flash CM6 onto my G1.
I see why people were complaining about performance issues.
Its a little sluggish, but usable (mind you are I am not using this as my daily phone)
thanks to XDA for a beginners guide to rooting this phone!
sorry bout this guys but im just curious.. i thought rc7 was for europe only... i honestly am confused now lol i know for me its rc29 im in america and you are in canada is the device really that different even though its such a short distance..? i apologize if its a stupid question...
Not applicable
Delete this thread
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Let me answer myself.
I don't think the latest rom 2.3.4 is compatible with the clockwork you supplied. So I have to flash my phone back to GRH78. I downloaded the stock ROM from the internet. and then push all the images file into /sdcard/clockworkmod/backup/2010.xxx.
Next, I restore the image in clockwork menu.
after restore, reboot the phone, now I am back in business.
When the phone is boot, i lost the root again, so i went to modaco.com and get Paul's package. run it, restart, I got the root.
Finally, go to market place and get ROM Manager, install the clockwordmod. and I have a 'proper' phone.
although I don't have the least rom, at least i got a working phone that is rooted.
bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
I have the same problem. How did you handle it?
Wow, why risk messing up your phone with flashing a boot.img when you can just rename /etc/install-recovery.sh to something like /etc/install-recovery.bak?
Here's one way to rename (courtesy of Matridom). Another is to use Root Explorer.
Matridom said:
The new update applies the install-recovery.sh script into our phones (not there previously.
Boot into the bootloader
flash CWM
select recovery from the bootloader (DO NOT reboot the phone)
apply the su binary
boot into the OS and test root
make sure busybox is properly installed
run ADB shell
then:
Code:
su
mount -o remount,rw /dev/block/mtdblock3 /system
mv /system/etc/install-recovery.sh /system/etc/install-recovery.bak
Boot back into the bootloader and re-flash CWM, should stay permanent now.l had applied the SU binary at the same time as the OTA update, then renamed the installer script and flashed back CWM.
Click to expand...
Click to collapse
andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
same here someone please help ?
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
Hi Bante, I am sorry for the inconvenience. I have revert back the CWM Recovery to 3.0.2.4. You can download it at the link above, and try it again
I hope that the problem you mention wont persist anymore
zero383 said:
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I am sorry but not all people can successfully use Command Prompt to do so.
I cant use command prompt, as it says "Image cant be loaded".
So I had to use this method.
I search around the forum and seen this as a quite common problem,
so I decided to share it
Hope you understand.
Anyway, thanks for your method too Cheers
andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist
16vMK1 said:
same here someone please help ?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist
Wow people like to make things complicated. Why install an entire rom to get ride of a script?
if you can flash cwm, you should have some basic understanding of fastboot, adb and the search options in the forums. the answers are all there already.
Sent from my Nexus S
No disrespect, I agree flashing recoverys should only be done after you understand how to use the tools to do it. there is no reason someone who is going to mod systems on their nexus shouldn't be able to use fastboot and adb properly. all the right drivers are in the sdk.
Sent from my Nexus S 4G using Tapatalk
nxt said:
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Click to expand...
Click to collapse
This is what I did.
I rooted my NS, which had 2.3.3
Used phone with stock 2.3.3 until I figured out which ROM I want to flash.
Before I flashed any ROM, did a Nandroid Backup through CWM.
Used the ROM for a few days, but when I saw that official update is ready for download for i9020A, did do a restore from the Nandroid backup I created.
Updated from 2.3.3 to 2.3.4, phone works fantastic, video chat also works great.
After update when I tried using any of the apps required SU permission, they didn't work. I tried installing a couple of .apk files, couldn't either install it or after installation it didn't work.
Thought let me try wiping my phone clean and start all over again, may be I will use a custom ROM again, downloaded ROM, went to ROM Manager to reboot into recovery, nothing happens.
Tried booting into Recovery option manually by pressing Volume Up and Power button, nothing happens but the Bot with an Arrow appears on screen.
So, I thought I will follow this procedure to reflash CWM to my phone and get it going. I was able to use the command FastBoot once, and suceeded pushing .img file to my phone but now whenever I try using the commands from my computer, this error message appears : "This application has failed to start becasue AdbWinApi.dll was not found. Re-installing the application may fix this problem."
Why this error message if I have the sdk on my computer already through which I was once able to push .img file without any troubles?
Can anyone tell me what would be a possible solution?
Also, how can I fix this problem and get ClockWorkMod Recovery installed on my NS again?
How can I get stock recovery image on my phone if I want start all over again from scratch?
Thx a million.
Edit ::: I found the answer as to how to how to install CWM again. Thx anyways.
Other question still remains a puzzle... why am I not able to install certain programs or if did manage to install, can't run them?
I ran your method and I think I'm stuck at some step...
My phone now default boots into CWM 3.0.2.4
Recovery boots to a newer recovery I flashed.
How do I get my phone to default boot into the OS again?
Edit: nevermind, just downloaded the full 2.3.4 rom, extracted and flashed the original boot.img.
dreamsforgotten said:
All the right drivers are in the sdk.
Click to expand...
Click to collapse
After installing the sdk and a platform, I have adb, but where is fastboot?
I was getting the same error as "Image cant be loaded". after hours of struggling I found that It's only because I was not in the same directory as the img file. silly eh?
hi,did you repaiar your phone,i have try everything but it just keep going in clockwork mode,if i than pres reboot now in clockworkmode it stays on google padlock
i realy need phone if you can help or someone else,than ....
just tried this method of window7 (thanks for the work) with cwm 3.0.2.4, but got the same result like the others in this thread: cant boot the android 2.3.4, the system is always booting into the cwm, no way out.
I don't think this tool works as it should.
:-(
EDIT:
I didn't realize that window7's tool would install the cwm into the boot-partition instead of the recovery-partition.
To get my boot partition back I downloaded the 2.3.4 firmware image from http://forum.xda-developers.com/showthread.php?t=1056062 and extracted the boot.img from the zip.
with "fastboot flash boot boot.img" I restored my orginal boot partition an can boot into android again.
(fastboot is part of the android sdk)
Hey guys I picked one of these phones up to play with a few days ago and im about to root it now. I was just curious if use this method
http://forum.xda-developers.com/showthread.php?t=584029
that would end up putting me on modaco I believe. But i was just curious if that would also give me CWM recovery or if i would need to/would be able to just go to the market and install clockwork mod and get CWM that way. I guess im asking whats the best method of getting CWM installed after i root haha.
HaiKaiDo said:
Hey guys I picked one of these phones up to play with a few days ago and im about to root it now. I was just curious if use this method
http://forum.xda-developers.com/showthread.php?t=584029
that would end up putting me on modaco I believe. But i was just curious if that would also give me CWM recovery or if i would need to/would be able to just go to the market and install clockwork mod and get CWM that way. I guess im asking whats the best method of getting CWM installed after i root haha.
Click to expand...
Click to collapse
Easiest root method is to use z4root and when it says rebooting you just manually reboot it. After that install Busybox installer and Terminal Emulator. Also download CWM from my signature and extract the recovery.img and place it in the root of your SD card. Use busybox installer to install busybox and once that is installed open up terminal emulator.
Enter these commands:
$ su
# flash_image recovery /sdcard/recovery.img
私のEVO 3Dから送信される。
dastin1015 said:
After that install Busybox installer and Terminal Emulator. Also download CWM from my signature and extract the recovery.img and place it in the root of your SD card. Use busybox installer to install busybox and once that is installed open up terminal emulator.
Enter these commands:
$ su
# flash_image recovery /sdcard/recovery.img
私のEVO 3Dから送信される。
Click to expand...
Click to collapse
I just wanted to chime in here with a recent experience i had installing recovery. I tried this way and it would have been great if it worked but either busybox didn't install right or it was a free vs paid or i just had a bad experience but flash_image command never worked for me.. I ended up installing an old rom manager apk file to get cw recovery as i couldn't dl it from play.. YMMV
Hey guys i appreciate the info! Thanks alot
good day guys
i have looked and looked, my lg d802 is rooted and i have twrp recovery installed, with 4.4.2 android version, my question
can someone tell me how can i flash a modem.img or modem.zip?
when i use the application twrp from andriod and say install from zip it reboots to recovery mood when i can restart my system or update from cash or update from adb
what do i do next, where do i find the zip file, if i push the file through su terminal emulator where can i find it or how can i flash it afterwords, i want to change my radio version coz my signal keeps dropping all the time
thanks in advanced
Rabia said:
good day guys
i have looked and looked, my lg d802 is rooted and i have twrp recovery installed, with 4.4.2 android version, my question
can someone tell me how can i flash a modem.img or modem.zip?
when i use the application twrp from andriod and say install from zip it reboots to recovery mood when i can restart my system or update from cash or update from adb
what do i do next, where do i find the zip file, if i push the file through su terminal emulator where can i find it or how can i flash it afterwords, i want to change my radio version coz my signal keeps dropping all the time
thanks in advanced
Click to expand...
Click to collapse
Flash it with flashify
:good:
xlr8me said:
Flash it with flashify
:good:
Click to expand...
Click to collapse
have you tried it with modem?
download this : https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
and apply it.
somboons said:
download this : https://mega.co.nz/#!kcVxSLaB!BJ4hHTF_3H8HR6EJTuak2hjiK1g1JosdKDfhcQ9Kr8g
and apply it.
Click to expand...
Click to collapse
could you elaborate, if i need to install it in my phone how can i if i cant install zip file through twrp?
Rabia said:
could you elaborate, if i need to install it in my phone how can i if i cant install zip file through twrp?
Click to expand...
Click to collapse
Why don't you try to install via twrp ?
You can't install roms you mean?
bender_007 said:
Why don't you try to install via twrp ?
You can't install roms you mean?
Click to expand...
Click to collapse
i rooted my mobile and found a software twrp on my device, if i say install from zip and slide, it reboots to recovery mode where it gives me yet another option, ones to restart system, another to install from cache and i go inside all folders but cant find my zip file, another it says from sdcard but when i choose it says cannot mount sd, and the final is to install from adb but i dont know how to install from adb
Rabia said:
i rooted my mobile and found a software twrp on my device, if i say install from zip and slide, it reboots to recovery mode where it gives me yet another option, ones to restart system, another to install from cache and i go inside all folders but cant find my zip file, another it says from sdcard but when i choose it says cannot mount sd, and the final is to install from adb but i dont know how to install from adb
Click to expand...
Click to collapse
Just type "adb sideload" in google or youtube.
bender_007 said:
Just type "adb sideload" in google or youtube.
Click to expand...
Click to collapse
okay thats a good start i shall try and see, thanks, any how if you have any other thoughts i would be greatfull
regards
bender_007 said:
Why don't you try to install via twrp ?
You can't install roms you mean?
Click to expand...
Click to collapse
But how can I flash the modem.bin extracted from kdz?
Sent from my LG-D802 using Tapatalk