the first problem for me that the phone doesnt respond when anyboody is calling me
one time respond other time the screen is off and if i press power botton dident respond
then i take off the cover and do hard reset
is there any solutions
with all my thanks and respect cotulla
ayhamshareif said:
the first problem for me that the phone doesnt respond when anyboody is calling me
one time respond other time the screen is off and if i press power botton dident respond
then i take off the cover and do hard reset
is there any solutions
with all my thanks and respect cotulla
Click to expand...
Click to collapse
you should hard reset the device, then you can flash rom again
Related
Hi,
I've a problem with my phone : my dizitalizer screen is out of run and i have been done a hard reset of my phone.
Now the message "tap your screen to set your preferences..." (or something lika that) appears on the screen. Is there a solution to bypass this step or not to see this message after a soft reset ?
Thanks for your help.
Re: Screen digitalizer HS and hard reset
roro10 said:
Hi,
I've a problem with my phone : my dizitalizer screen is out of order and i have been done a hard reset of my phone.
Now the message "tap your screen to set your preferences..." (or something lika that) appears on the screen. Is there a solution to bypass this step or not to see this message after a soft reset ?
Thanks for your help.
Click to expand...
Click to collapse
Sorry to be the bringer of bad news but, "Tap the screen" means just that.
Whats wrong with the screen?
And just for your info, a soft reset is either:
1. Hold Power button longer that 15 secs and turn off / back on.
2. Pressing the recessed button on the right hand side.
A Hard reset is when you hold both the Comm button and Voice button at the same time and reset using the indented button. Keep them held while the device cycles and the reset screen appears.
Re: Screen digitalizer HS and hard reset
Yes I know but my dizitalizer is out of order so I can't tap the screen...
(I used my pdafone without stylet until now since my screen is out of order)
I look for a way to bypass this step because it's physically impossible for me to do the operation.
Thanks for your help.
Jerry-S said:
roro10 said:
Hi,
I've a problem with my phone : my dizitalizer screen is out of order and i have been done a hard reset of my phone.
Now the message "tap your screen to set your preferences..." (or something lika that) appears on the screen. Is there a solution to bypass this step or not to see this message after a soft reset ?
Thanks for your help.
Click to expand...
Click to collapse
Sorry to be the bringer of bad news but, "Tap the screen" means just that.
Whats wrong with the screen?
And just for your info, a soft reset is either:
1. Hold Power button longer that 15 secs and turn off / back on.
2. Pressing the recessed button on the right hand side.
A Hard reset is when you hold both the Comm button and Voice button at the same time and reset using the indented button. Keep them held while the device cycles and the reset screen appears.
Click to expand...
Click to collapse
Any idea ?
a solution
i think i've found a solution. the problem is the software 'welcome' that is in the startup folder of windows. Is there a way to remove it from the rom ?
cook your own rom
Well, people do cook their own roms. Xelencin and summiter do so regularly. moyofalaye has done so too. The welcome screen is part of the ROM as opposed to the extended rom, so that it is a more involved thing to remove it. On the other hand, I am sick and tired of changing my appointment with Dr. Johnson and would welcome a ROM that avoided that part.
my hd is not responding to touch or anything else when i reboot doesnt seem to load up HTC home?
bandit250 said:
my hd is not responding to touch or anything else when i reboot doesnt seem to load up HTC home?
Click to expand...
Click to collapse
Have you tried a hard reset?
Make sure you have a backup of contacts etc
Then turn off phone (remove battery if you have to)
Hold the volume up and down button in (Make sure your pressing both up and down)
Then press power button it will show a message on screen to reset blah blah
release the volume buttons
push the volume up
then volume up again
see if that works
bandit250 said:
my hd is not responding to touch or anything else when i reboot doesnt seem to load up HTC home?
Click to expand...
Click to collapse
Have you recently changed anything on your device? i.e. new rom, USPL, HSPL, new app/software etc
Strang
Just now my freind have the same problem
I tried hard reset but it did not work.
He bought his device from England
Is some one experiance this probleme before?
Screen stopped working, black screen.
I have the same problem
touchscreen not responding
me too
My HD touchscreen not responding
please help
Tell us before what you did to get the touchscreen not responsive... When you touch the screen, does the backlight get higher or not ?
I installed
HSPLWrapper_Blackstone_156OliNex
and
Miri_WM65_23004_Premium_Manila_2.5_REV2
one week ago, everything work ok, but yesterday just no touch response. I tried to hard reset it but when the hard reset start I can't tap the screen to continue the set up. only the volume and power buttons working. Any Advice, please..
reinstall shiped rom, and HSPL 1.14, not help
sorry for my english
To hard reset device you do not need to tap screen
Simply turn off device or remove battery from device
If battery removed, re-insert it after a couple seconds
Hold down volume down and volume up and then press power on bottom
Continue to hold volume down and volume up until you are presented with white screen with text
Follow instructions and press volume up to hard reset
HardReset not help
rob971 said:
HardReset not help
Click to expand...
Click to collapse
Try to full charge first your phone, and after then, the others what were mentoined before, hard reset or flash again correct ROM !
i have hp ipaq hw6925 and he is not work he say on the screen serial hp invent vG.39 please help me please ...
hard reset
maan91 said:
i have hp ipaq hw6925 and he is not work he say on the screen serial hp invent vG.39 please help me please ...
Click to expand...
Click to collapse
Press and hold the Send and End buttons (green and red ones) and the power button at the same time.. While doing this, press the stylus into the reset hole until the screen resets and the power light comes back on.
Eric
don't work
don't work hard reset
don't work too
shep2112 said:
Press and hold the Send and End buttons (green and red ones) and the power button at the same time.. While doing this, press the stylus into the reset hole until the screen resets and the power light comes back on.
Eric
Click to expand...
Click to collapse
don't work too
what do yo mean "dont work"
did the hard reset start? or nothing happened when you pressed the button combination?
thebranded said:
what do yo mean "dont work"
did the hard reset start? or nothing happened when you pressed the button combination?
Click to expand...
Click to collapse
i do hard reset and nothing happen and i do the pressed the button combination the same think ?!? what can i do now my windows not run ?!?
Are you pressing the 3 buttons, and then while holding them, pushing the stylus in? I think it's about 5 seconds before it resets, so it takes some time, be patient while holding the buttons and the stylus
Eric
hi
maan91 said:
i have hp ipaq hw6925 and he is not work he say on the screen serial hp invent vG.39 please help me please ...
Click to expand...
Click to collapse
just add me on skype (cata_i0an) or yahoo messenger (cata_cata_cs)
My windows button next to the home button does not work it has not fallen or anything. The start on upper left side on the screen doesnt work either! When I click on them I just come to an strange mode there it ask me if I want to lock the screen....
ok it seems nobody have a clue... then I maybee will softreset my HD2.
Did you managed to fix this?
My Windows button, back button and volume buttons all stopped working yesterday
I reset the phone. Now it works again
Did you have to do a hard reset or did yours start working with a soft reset?
just reseted it from the meny. I dont know the difference hard or soft. Im a noob hehe
janne303 said:
just reseted it from the meny. I dont know the difference hard or soft. Im a noob hehe
Click to expand...
Click to collapse
Soft reset is like turning phone off and on again.
Hard reset sets phone back to factory settings like you turned it on for the first time.
why are there still ppl that ask questions before they rebooted the phone......... god, thats rule nr. one xD
since yesterday, i have this nasty problem with my touchscreen. when i press the power button to wake the phone, or to get into the power-menu, the touchscreen stops working. this does no happen if i press any other button.
sometimes, i can use the phone again if i wait until the screen turns off and then wake it up by pressing any other button, but most of the time i need to pull out the battery and restart the phone. even when i pull out the battery, the screen won't work sometimes, and i have to restart the phone again.
when i first experienced this problem, i was using the nexushd2 v2.0 rom, i then updated to the v2.1, which didn't help. i tried reinstalling the rom, wiping the /data/ , the cache and the dalvik cache (multiple times) and eventually changed to the typhoon cm7 rom (with repartitioning and reinstalling the magldr), the problem is still there.
the phone did never get wet, fall down, or anything the like. pulling out the sd card makes no difference.
i hope someone can help me there
May be it´s a hardware problem, some HD2 have it.
You can test it, if you go back to windows.
its the good old digitizer its right under the power button press the end button hard and it should work again but if you press it again it will corrupt use softkey or remap your hardware buttons
http://forum.xda-developers.com/search.php?searchid=22866591
Kameirus said:
http://forum.xda-developers.com/search.php?searchid=22866591
Click to expand...
Click to collapse
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Nigeldg said:
Lol, I was about to do that
@OP, in future please use the search button before posting. There are far too many threads in this forum with exactly the same issue as Kamerius has just proved, so why couldn't you save both us and yourself some time and search first? Anyway, what you have is a digitizer issue, but a quick temporary solution is to simply press as hard as you physically can on the end call/power button. The screen should work after that. Use a button remapper or some sort of widget to enable you to use the phone without ever touching the end call button, and make sure to use other buttons to wake the screen.
Click to expand...
Click to collapse
lol
i have the same problem with the endkey but with the rom in my sig
it actually has a softkey button that can be setup with a power softkey ..longpress on the softkey and it pulls up the power menu
just like it would do if you used the hardware power button
Yeah I thought there were softkey power buttons but I wasn't sure and I'm on my phone so couldn't be arsed to search
Sent from my HTC HD2 using XDA
Kameirus said:
link that doesn't work anymore
Click to expand...
Click to collapse
Nigeldg said:
many words
Click to expand...
Click to collapse
well, sorry dunno why i didn't search the forum before
pressing the power button hard worked , but i think i'll keep using soft buttons and wake the device pressing any other button (i don't think the brute force method is a good idea as i want to keep my phone some time longer )
Touch Screen Problem in HTC HD2
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
nrvjain said:
Thanks for your reply
Well i had HTC HD2 and i had install Android 4.0.3 and it was working fine from last 1 month but today suddenly it stop working touch screen and after 1 hour it started again but i wont able to touch every where it randomly working
So after then i read you reply and i try it i had press Hard Power button and then its started working fine and its work for 1 hour and then again stop so i again press hard power button and its started and also iam not using power button for any use
so you can let me know what is the permanent solution for this do i need to change touch screen completely it is damaged
pls let me know i will very thank full to you because 8 month back i already replace touch screen once and today again same problem
thanks
Click to expand...
Click to collapse
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Exactly, the same issue started to happen yesterday!!!
mwuahjaan said:
I am facing the same issue except no matter how hard I press the red button....LCD doesn't works. I have even replaced the thin metal strip which rests under hardware buttons.
Anyone?
Click to expand...
Click to collapse
I tried changing the metal strip too. But it still the same. Doesn't work.
Sent from my GT-N7100 using Tapatalk 2