Related
i cant get the phone to boot at all and it wont reinstall any roms as it always freezes at 0% is there anyway possible to restore this phone?
Sheon849 said:
i cant get the phone to boot at all and it wont reinstall any roms as it always freezes at 0% is there anyway possible to restore this phone?
Click to expand...
Click to collapse
get start to give us some more information sir, witch rom/radio you gave install?
I have a very similar problem with my HD2. I do not know which radio is installed but it used to be and still is whatever came from the factory when I bought it from the T-Mobile USA. I used the NAND flash because i had issues with it. So let me first explain how i got here. The phone was good for a about a 6 month period of time and then the issues started. The issues were exactly the same with its stock WinMo as they are with Android so I really thin that it is the phone itself. The only question i have is, is there hope? Ok so it was bad and it would not boot or anything so I decided to put it in a ZipLock bag and put it in freezer. After taking it out and making sure that ZipLock get the condensation as opposed the device itself I started the NAND flash. I used HSPL3 and did that first (It used to be SPL-2.10.0000). Then I used the MAGLDR 1.11 and that worked too. then I used the DAF.exe NAND flash that was ported over from HTC Desire. So then I got stuck right after Rebooting message. So ALL was well but it would not reboot. I let it sit and then after no change in hours I pulled the battery. After that the phone would not start and Iput it back into freezer. After it got cold i started it just fineand Android was awesome. Up until the point where i went browsing through stuff on Android. Also note that I did go through "First time use" setup with no issues.Anyways, has anybody seen this behaviour on this phone and is there help? Thank you in advance.
Also to add. Every time the phone will not boot I can know ahead of time because it will have vibrations going off. So basically if I get vibrations (About eitgh of them in sequence) the phone will not start up. Yes, it was like this under WinMo as well.
very weird issue or i am just having hallucination:
after reading the news today about the HTC HD2 having the ability to install Android onto NAND i quickly went out to buy one. i was hoping it'd be cheap but it wasnt.
i found a store which had 3 units. all of which he promised were new but they arent so i got it and came home to install android on it ... anywho i ran into some issues but now all is good. android is on it.
my issues that i am concerned about and iam hoping i dont run into (like my last hd2 which wouldnt charge no matter what so i sold it)...
the issue right that i ran into before having android on the unit i would plug it in the charger and the light would turn "orange" for charging. when i unplug it it would just stick red... it was very weird.
now that i installed android on it i am noticing its turning off (the charging led) when unplugged however even though its on the charge the charging icon is just a solid "green battery" without the lightning icon in it.
not to dwell cause i am having trouble trying to figure this out... how do i diagnose my battery and charging mechanism on this device? shall i revert to winmo just for a test?
[update]... i left the laptop on and the hd2 turned off while connected to it thinking it would charge... i came back 4 hours later and the light is red. the unit will not turn on unless i remove the battery and reinsert. (this is with having android on nand)
what gives?
anybody experience this? i am sure i am not the only one here....
it is a bug of magldr 1.11
it is fixed in magldr 1.13 according to Cotulla
How interesting. i guess that makes a whole lot of sense now.
because when i installed WinMo everything worked fine.
Thanks!
maybe u should try the newest mgldr ?
i think 1.12 is the newest ^^
flashed gingerbread on NAND today and everything is full functional (of course ;D)
jonas2295 said:
maybe u should try the newest mgldr ?
i think 1.12 is the newest ^^
flashed gingerbread on NAND today and everything is full functional (of course ;D)
Click to expand...
Click to collapse
ya i actually did try 1.12 and noticed the problem went away but i didnt have time to update this post.
thanks!
you´re welcome
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
isoDUB said:
i have an HD2 with a cracked screen i bought on craigslist. the unlock screen will stop working sometimes, and when i pull the battery and reboot, the home screen sometimes doesn't work. i've heard of these problems before but i'm not sure if this is a software or hardware problem. the previous owner had the phone running on AxLor DF1 XLite WWE. please help!
also i'd like to know how to flash to stock through micro sd, since i don't have a usb cable.
Thanks.
Click to expand...
Click to collapse
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
T-Macgnolia said:
Go to this thread here, this is a thread on flashing from SD card. It has all the info you will need.
Also you can buy a replacement screen and install it. There is a couple of threads here on XDA on how to do this just do a search for them.
Click to expand...
Click to collapse
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
isoDUB said:
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
You can't have them all. You can have WP7 running from NAND and Android running through SD. Not too sure on the rest though.
Sent from my Nexus One using XDA App
isoDUB said:
thanks, got on the stock T-Mobile rom now, but the touch screen on the lockscreen only sometimes works. would flashing to android fix this? i notice it will unlock sometimes after i press power then give it a few minutes, so i'm not sure if this is hardware or software related, and i'd like to avoid replacing the screen if i can.
EDIT: weird, i read a thread that said i should use the call button to unlock, and after a battery pull and waiting a few minutes, its worked for a bit, so i guess i found a temperary fix....
so now, i was wondering if its possible to boot android from the nand, and boot windows mobile 6.5, wp7, ubuntu, and meego from the sd, or can win mobile 6.5 only be booted from the nand? also, i need spl/hspl to boot all these things right?
Click to expand...
Click to collapse
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
T-Macgnolia said:
I know it would be a pain in the butt and in the wallet too. But it would probably benifit you to replace your screen. But this is a dessision that you will have to make for yourself.
Glad you found a teperary fix!
Yes you will need HSPL and also MAGLD flashed to your HD2 in that order to flash a NAND Andriod ROM. I beleive you can flash HSPL from your SD card, I think the thread I linked covers this. Buy I din't think you can flash MAGLD from your SD card. So you will have to have a USB cable for this. You can go to the HD2 Andriod NAND ROM section here on XDA and do a search for MAGLD and you will find the thread on it so you can double check and see if you can but I really don't think it is possibble. But you will have to have a USB cable to flash Andriod, WP7, MeeGo, and Ubuntu cause MAGDL does not have SD card flashing ability yet but they are working on it though. They are also working on being abale to run Windows Mobile 6.5 from SD card but as of right now it is not possibl, only from NAND right now. Also if you install a NAND Andriod ROM I think you can run WP7 from SD card but don't hold me to that cause I am not 100% sure of that, but if So that isit no other OS from SD card when running a NAND Andriod ROM.
Click to expand...
Click to collapse
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
isoDUB said:
thanks. for now i'll just work on installing android to the nand. i have a question though, will turning off the lockscreen in android possibly fix the touchscreen problem? i've been racking my brain trying to figure this out. i can either hurt my wallet with a screen repair, or i can do a battery pull every everytime i use the phone.. a real pain in the ass... sigh.. at least i got the phone cheap..
Click to expand...
Click to collapse
You know I can not say for sure if turning off the screen lock would solve your problem. But it sure is worth a shot so I say go for it and see. Also you can use a app like Touch Tools or BsB Tweeks to cut the lock screen off in Windows Mobile. Just do a search here on XDA or do a Google search for them and you will find them I recomend the Touch Tools this is a really great app. It adds a lot of tweeking ability to your HD2. I love it and have been using it for atleast 5 to 6 months now. Anyway if turn off the lock screen with one off these apps and it fixes your issue. Then you will know if you turn off the lock screen in Andriod it should have the same result. Heck if it fixes it you might just keep Windows Mobile ha ha just joking. I would not blame anyone for flashing a NAND Andriod ROM and getting rid of Win Mo. I personaly like Win Mo.
You're best off investing in a USB cable too lol. Your local hardware shop will have them. Its just a basic USB to micro USB cable.
I dont think any amount of tinkering with any OS is going to resolve your touchscreen problem............
The screen is cracked right?? Theres your problem.........
Could be issues with the digitiser as well because of this.
First job, new screen...........
i've been messing with the phone last night, and it seems the problem is related to the end call button. it seems whenever i try to wake up the phone with that button, it will freeze, while using the green button will wake up with no problem most of the time (>20% chance of freeze). it seems the freezing doesn't happen after a certain amount of time, since i left the phone in sleep all night and woke it up in the morning no problem. so in case anyone has the same problem as me and is too cheap to fix it, try only using the end call button when actually calling/putting the phone to sleep.
and where could i get a micro usb cable cheap besides online? i think t-mobile has them but they're like $10+...
it's dead again!
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Body said:
earlier today also happened to me this problem, I install several rom a day, I can not go a day without testing new rom, I thought the problem was that, because I found this topic, when I use the button to connect the phone, everything is well, but not always the case that with the off button. Was it any rom that did this damage in some piece of hardware?
Click to expand...
Click to collapse
isoDUB said:
help! (again). the touchscreen is dead after i HAD to use the power button today, and now i can't use the touchscreen at all! i've tried turning the screen on and off like 50 times, tried like 10 battery pulls, but nothing! please help! can i open my phone somehow to get to the end key hardware or something???
Click to expand...
Click to collapse
Sorry to tell both of you but your problems are hardware related. Member isoDUB yours is most definitly a hardware issue, but it has been a little bit sense you posted that post so I hope you have got your HD2 fixed or are working on getting it fixed. Member Body yours sounds hardware related to cause if you flash another ROM and you still have the problem with your buttons then it is most definitely a hardware issue.
Best option is to send to HTC and see if you can get a new one for free if you are under warranty.
same problem
hi
im not original english speaking so please excuse my bad english.
a few days ago i got the same problem. the display doesn't work when the phone was waked up with the endcall button.
when i woke up the phone with an other button the display worked.
i sended it to htc an they just told me they will not repair it because it is not in the original contition.
i flashed it with the latest original rom from htc but they didn't tell me what is wrong in detail.
i answerd them an asked what is wrong but until now i didn't get an answer.
Hello, I have a similar problem. When you unlock the screen so we jump on the green but some spots that disappear after a while.
Disaster strikes !!! Same prob here !!!
its indeed something with the buttons ... Touch screen is dead ... but sometimes its workin!!
Three months ago ... I changed the case of the HD2 with a new one. The "old"one was full of scratches ...
I think yhat HTC is not gonna accept that ... the "void-label" on the screw is damaged...
What do you think Guys ??
Grtz
every where the htc hd2 screen problem ........... i think that every one who has the htc hd2 facing the screen problem we shopuld start the new thread where we that who has the htc hd2 without any touch screen problem
Have the same damn problem ..once the screen is locked ..its impossible to slide it to unlock ..previously it was working 50% of the time and now it doesnt work at all :-(( ..
Any suggestions ? ...I read alot on the forums and people seem to say that its digitizer related but the imp thing is to note that almost 98-99% of the people having this problem are frequent Android rom flashers ..so does Android have something to do with this and will flashing original stock rom back be the solution ??
Hi there,
I´ve got a HD7 and want to use Android. But this ist @ moment only posible with an HD2...
Now I wan to switch to HD2, but I have some questions about it...
Can I flash Android on every Bootloader? Is it pssible to flash Android to NAND?
How stable is Android un HD2?
Thanks for help...
This should answer your questions about prerequisites. NAND Tutorial
Just sold my HD2 b/c I wanted a native Windows Phone 7 device, but the Android builds are pretty good and getting better every day. There's some really impressive dev work going on in the HD2 community here. That being said, don't expect everything to work immediately...expect to do some tinkering. You may find varying opinions on this last point, by that's my take on the situation.
Yes you can flash Andriod or Windows Phone 7 to NAND. But you can not use the normal bootloader to flash these two you have to have MAGLDR flashed to the HD2 as this and Clock Work Mod (CWM) are the two different custom bootloaders that can flash Andriod. But only MAGLDR can flash Windows Phone 7. You also have to flash HSPL 2.08 to the HD2 before you can flash MAGLDR. Andriod is very stable on the HD2 but you must remember running Andriod or WL7 you can only charge your HD2 while it is on and the charge led will not function the same as in Windows Mobile. This is a side effect of MAGLDR.
So here is a simple run down, flash HSPL 2.08 first using HSPL 4. Then flash MAGLDR 1.13 followed by CWM if you want CWM wich most AnDruod ROMs for the HD2 use CWM now. Then flash the Andriod ROM. If you are going with WP7 flash the WP7 ROM after you flash MAGLDR. Hope this helps out.
Here is another good guide.
http://forum.xda-developers.com/showthread.php?t=939682
I am also switching to an HD7 from an HD2, because I did not want to mess around with the HD2 WP7 bugs anymore (camera, multitouch, etc.) and the HD7 is quite cheap right now compared to what I paid for my HD2 a year ago.
Using android on the HD2 on NAND is possible, but it will require some work and tinkering, just as inconceeeivable said. So if you don't want to switch between different builds and different operation systems I would rather get a native Android device. But if you want OS-flexibility the HD2 is certainly the way to go.
ng-gdata said:
I am also switching to an HD7 from an HD2, because I did not want to mess around with the HD2 WP7 bugs anymore (camera, multitouch, etc.) and the HD7 is quite cheap right now compared to what I paid for my HD2 a year ago.
Using android on the HD2 on NAND is possible, but it will require some work and tinkering, just as inconceeeivable said. So if you don't want to switch between different builds and different operation systems I would rather get a native Android device. But if you want OS-flexibility the HD2 is certainly the way to go.
Click to expand...
Click to collapse
I like to use android on HD2 because I like the design of the HD2, and when it´s stable so why not?
I don´t want to use WinPhone7 anymore, I had a desire before and th HD7/WP7 was an experiment, but it´s over for me...
So i´m going to change my HD7 to HD2 and have the same phone without Win7...
Somebody wrote, that it´s not possible to charge phones that are powered off? How do I charge it, if the battery is empty?
[email protected] said:
Somebody wrote, that it´s not possible to charge phones that are powered off? How do I charge it, if the battery is empty?
Click to expand...
Click to collapse
If you forget and let your battery run completely out while running Andriod you can either borrow a friends HD2 and charge your battery for a few minutes. You can buy an external charger wich if you go this rout it is recomended to buy another battery also so you can constantly have a battery on charge. Or you cab us a old or very cheap USB cable and cut the end off and strip back the red and black wire then hold, or tape, the red wire to the positive (+) terminal on the battery and the blackwire to the negative (-) terminal on the battery. The terminals are marked on the battery. But you only need to do this for a few minutes to get enough charge to .oot up and then charge the phone normally.
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Does the area beneath the battery shell, behind the phone, feel particularly hot? If so, it's likely overheating (HTC calls it a current leakage... something?) and if you're under warranty you may wish to send it back.
Otherwise, there are fixes (suck as devising your own extra heatsink, reflowing the solder).... but it's non-trivial.
Does it freezes while using any particular applications, and what happens when it freezes???? I mean does it get to normal by itself or you have to pull the battery out and restart your HD2.
I am asking this because I was also having the same issue with my previous HD2, and then I came across this post
http://forum.xda-developers.com/showthread.php?t=1189544
which explains a lot about bad blocks which affect the android build.
DutchMaster117 said:
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Click to expand...
Click to collapse
dude, u need to give the detail of your problem, when and how it freezes. Cuz there are lot of problems by which a phone can be freezed up.
hstr said:
dude, u need to give the detail of your problem, when and how it freezes. Cuz there are lot of problems by which a phone can be freezed up.
Click to expand...
Click to collapse
yea sorry im just at the point where idk what else to do.
Lemme be more specific about this.
Theres times where it would actually boot up to where i can make a call but only for less than a couple minutes most of the time. There are times where i get lucky and it stays on for a good while ( couple hours ) and it'll stay that way as long as i dont use it. It freezes up starting up just about any app so i have this odd feeling it might be my sd card. But then i dont understand why the next thing happens. After i remove the battery and put it back in and boot either 1 of the 3 happens.
1) 1EFATAL HIT 1
2) Gets stuck on Go go go
3) gets stuck after go go go when rom tries to boot up.
Only thing i can do to get it to boot up again is take the battery out and leave it out for a good 10-15 minutes.
I tried Task29 and reinstalling magldr, cwr, and Rafdroid Rom and i still get the same crap
The Phone gets a little warm under the cover sometimes but its right were the micro sd is located
I'm having the same problem. My HD2 will freeze if I play games on it causing me to pull out the battery and when I boot it up, sometimes it will freeze at the MAGLDR screen, will freeze as soon as the rom boots. Right now my phone seems stable and I'm only using it for texting and making calls and nothing else for the fear of damaging the phone any further. I have a TMOUS phone btw.
DutchMaster117 said:
yea sorry im just at the point where idk what else to do.
Lemme be more specific about this.
Theres times where it would actually boot up to where i can make a call but only for less than a couple minutes most of the time. There are times where i get lucky and it stays on for a good while ( couple hours ) and it'll stay that way as long as i dont use it. It freezes up starting up just about any app so i have this odd feeling it might be my sd card. But then i dont understand why the next thing happens. After i remove the battery and put it back in and boot either 1 of the 3 happens.
1) 1EFATAL HIT 1
2) Gets stuck on Go go go
3) gets stuck after go go go when rom tries to boot up.
Only thing i can do to get it to boot up again is take the battery out and leave it out for a good 10-15 minutes.
I tried Task29 and reinstalling magldr, cwr, and Rafdroid Rom and i still get the same crap
The Phone gets a little warm under the cover sometimes but its right were the micro sd is located
Click to expand...
Click to collapse
Last question to u, that when u had ur stock windows rom in ur mobile , does any thing happened like this.
if not, then the problem is not in your mobile or sdcard, the problem is in the method u are intalling by.
1)try to get back to windows mobile.
2)install hardspl4 - 2.08 (not Hardspl3 - 2.08)
3)install magldr 1.13 (not magldr 1.11)
4)install clockworldmod recovery 3.0.0.5 (if ur rom is a cwm rom.)
5)Now flash the rom.
6)give it a try, if not any issue, then
7)push the thanks button. .. lol
hstr said:
Last question to u, that when u had ur stock windows rom in ur mobile , does any thing happened like this.
if not, then the problem is not in your mobile or sdcard, the problem is in the method u are intalling by.
1)try to get back to windows mobile.
2)install hardspl4 - 2.08 (not Hardspl3 - 2.08)
3)install magldr 1.13 (not magldr 1.11)
4)install clockworldmod recovery 3.0.0.5 (if ur rom is a cwm rom.)
5)Now flash the rom.
6)give it a try, if not any issue, then
7)push the thanks button. .. lol
Click to expand...
Click to collapse
That's actually the same thing I do.
Alright I know this might sound ridiculous but it seemed to work ( so far ). After 6 hours of trying to get this phone to work I decided to try something I saw on another thread. I got an icepack and did a complete install while having the phone on the icepack to keep it from getting warm. To my suprise it worked... I'm using my phone now with no issues yet and its been about 12 hours and it hasn't frozen yet. Although it did do a random reboot once ( I have a few bad blocks so I'm guessing that might be the reason). But Yea this worked for me some how. I'll update on any issues I get as soon as I can.
Sent from my HD2 using XDA Premium App
Same problem for me. My hd2 always freezes with any sense ui android build. MIUI and Nexus HD rom works fine.
My simple advise is... reinstal windows. And try again.
This worked for me when i started with the HD2.
Sent from my mercury using XDA App
Hi I had the same problem, but I sent my phone for repairs and it never froze again. According to HTC they just replaced the main board. But before I did that I actually flashed the official RUU (windows 6.5), and it continued to freeze, so I was quite sure it was a hardware problem. Indeed after repairs my phone didn't freeze anymore.
Sent from my HD2 using XDA App
DutchMaster117 said:
Ive had 2 HD2's and its been the same problem for both.
No matter what rom i use on my hd2 it ALWAYS freezes(I was having the same issues with my first hd2 but eventually the screen on it stopped working and i sent it back for warranty and got a new one)
Ive flashed 2 other hd2's that belong to some friends and i did the exact same thing to their phones that i did to mine and they dont have any issue.
I dont know what to do and why am i the unlucky one
Please XDA Community i come to you for Guidance! I know this phone can be amazing but why is it being so stubborn!
Can it be SD related?
Click to expand...
Click to collapse
I also had 2 x HD2 which did this.
Froze when got to hot, or if using gps or mobile data.
Sold it 2 weeks ago, now own Desire HD and it's BRILLIANT!!
So now ive been running rafdroid on the phone without an sd and it runs.. but laggy since theres almost no space left in phone and it isnt getting hot. It only gets hot when it operates with the SD inside.
anyone know anything about that?
same problem
i have the exact same issues. the phone freezes every time it boots, be it magdlr nand, sd, wm 6.5 anything. however my old hd2 had no problems at allbut i broke it changing the screen digitizer and lcd.
(the white plastic on the connector that connects the lcd and digitizer to the main board broke.)
im pretty sure the reboots are mother board related but i don't know if telling tmobile or htc that will do anything because the phone is old. (i got this other hd2 from a guy on craigslist.)
I had the same freezing problem with my HD2. After all the research I've done, none of them worked. Then i put the phone into the freezer for a minute and took an ice pack, placed it on the back of the phone where CPU is located. While holding the ice pack, I re installed the ROM and at the and freezing issues were solved. It never froze again.
I hope this solves your problem too.
oztorque said:
I had the same freezing problem with my HD2. After all the research I've done, none of them worked. Then i put the phone into the freezer for a minute and took an ice pack, placed it on the back of the phone where CPU is located. While holding the ice pack, I re installed the ROM and at the and freezing issues were solved. It never froze again.
I hope this solves your problem too.
Click to expand...
Click to collapse
I want to ask whether this cooling trial fixed freezing problem forever? suppose if u use your set for more than for hour streaming over wifi? never it got freeze again?
The best solution that you can flash back to WinMo 6.5 and run Android from SD Card.
I have the same issue... but...
Make a complete instalation with an ice pack?? Are u joking me?? It works??
well... i have not to lose... i will report if i try it...
I flashed stock rom and run android from sdcard. but when i press Haret.exe is going to HTC green logo and after restarting. some solution?
Similar problem
I have a similar problem. But with two different phones.
I bought LG Optimus One about two years ago. After a few months, some freezes appeared... I've sent it to manufacturer three times and every time they changed some parts... but nothing have helped. I've made some experiments (another battery, SIM card, MicroSD card, custom ROMs) and than I realized, that the problem occurs only while the mobile internet is ON.
This summer, my friend offered me used HTC HD2 and I bought it. He used to have Android there with no problems. After a few weeks, the freezes occured again. And again: I can surf internet all day by wifi with no problems, but when I tunr on the mobile internet (MI), the phone freezes. The back cover of battery is a bit hot, but this appears while long using the phone too without MI (without freezes).
I've tried almost everything to solve this problem: changed SIM card, changed SD card, everytime with flash of the newest ROM... nothing helped.
I'm not sure if the problems with LG OO and HTC HD2 have the same reason, but I can't believe I can buy two phones with similar problems without transfering them.
What aboutthat crazy plan of flashing with ice cooling? Does it work afret a few months too?
PS: Sorry for my English