I hate idle Edge Connection - Android Software Development

Hi all,
Is there any way keep Edge connection always up? When i lock the screen and wait some minutes, connection gone idle and mails dont came. When i unlock the screen and switch the Wi-fi connection, mails instantly drop in my mailbox.
I want keep the 3g or 2g connection always up. Any way ?
Thanks,

Related

Wi-Fi question

Prob a silly question, but once the phone goes into standby (screen turns off), I take it the Wi-Fi connection is broken ?
Asking in case of push mails, because I do not get anything when in standby I take it that because Wi-Fi is also down.
Note - Just trying not to use GPRS, 3G when at home.
Another question does anyone know what the Wi-Fi power does, best battery or best performance other then what it says how is it doing that ?
Yep, Wifi is broken when your phone is in standby.
And Pushmail only works with GPRS and not with Wifi as far as I know.
Cheers,
Drifter
thanks.
Jeegnesh,
To my amazement active sync works when your device is in standby and WLAN is enabled.
I use it now on the office and at home to receive my e-mail.
But to get it working properly you will have to disable "when new items arrive".
My device sync's every 5 minutes and notifies me when there is a new message.
Cheers,
Drifter

WiFi over GPRS

Folks,
I use the WiFi connection on the Exec a lot, pretty much all day every day in fact. The problem is I have to change the power settings of the phone to never shut down otherwise when it does, the WiFi connection gets dropped and the a GPRS gets established instead - and that costs!
Is there anyway to prevent the WiFi getting dropped when the phone shuts down? Or maybe a way of making WiFi a priority over GPRS so it will connect that first?
I suppose worse case scenario, I could disable the auto connect feature of GPRS, anyone remember the hack for that?
Tom
Hi, there's a hack for that in the following thread:
http://forum.xda-developers.com/showthread.php?t=257415

Data connection, no auto-disconnect?

Hi guys,
I have recently moved from symbian platform to WinMo. I do have a question regarding data connection. Does it ever auto disconnects? (for example in my old N95 if I clicked sync in my mail application, the phone would connect, download new mail and then auto disconnect when the job was done)
Also the phone would disconnect from data connection after closing app that was using it.
Now with my HD2 when I sync email, refresh weather etc the data connection stays on. Do I have to disconnect it manualy every single time so it doesnt drain my battery? It is very annoying since I have to do it manually very often.
Please advise... maybe I am missing something...
Cheers
Pete
Hi,
There's a few threads on here on data connection disconnection. There is also a hints & tips thread right at the top of this page.
Use this tool to find what you are looking for..http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
WB
install the 1 min disconnect tweak thats on this forum.
if you only set emails to check automatically it will disconnect ok using the above tweak but if you have weather and/or twitter apps connecting to update for some reason it will not close the connection at all i have told htc but never heard back
The only real reason for disconnecting a data connection is if you want to prevent unwanted costs associated with data exchange.
If you're in a weak signal area you can save battery by switching the connection band to GSM rather than 3G, but in a strong signal, 3G is more power efficient.
An open, but quiescent data connection has little or no effect on battery life as it's simply using the network infrastructure; battery usage only occurs during actual data exchange. So, if you turn off all the auto-update features and set email polling to a longer interval you should be OK. Kind of defeats the purpose of the device though
NeilM said:
The only real reason for disconnecting a data connection is if you want to prevent unwanted costs associated with data exchange.
If you're in a weak signal area you can save battery by switching the connection band to GSM rather than 3G, but in a strong signal, 3G is more power efficient.
An open, but quiescent data connection has little or no effect on battery life as it's simply using the network infrastructure; battery usage only occurs during actual data exchange. So, if you turn off all the auto-update features and set email polling to a longer interval you should be OK. Kind of defeats the purpose of the device though
Click to expand...
Click to collapse
From my experience all Symbian devices and the iPhone auto disconnect from the network once the data connection is no longer needed. They also reconnect in the blink of an eye. It kind of irritates me that Windows Mobile doesn't allow you at least the OPTION of doing so. It's particularly annoying if you're connected to a speaker and can't get 3g as there's a constant noise going off. I also think it can't be great for your balls having that connection constantly active! It's not HTC's fault though, just I think a result of Windows Mobile being inherently quite archaic...perhaps Windows have just overlooked it.
There's a great free app HERE to tweak the WinMo connections for individual apps. It's a must have for me.
petexx said:
Hi guys,
I have recently moved from symbian platform to WinMo. I do have a question regarding data connection. Does it ever auto disconnects? (for example in my old N95 if I clicked sync in my mail application, the phone would connect, download new mail and then auto disconnect when the job was done)
Also the phone would disconnect from data connection after closing app that was using it.
Now with my HD2 when I sync email, refresh weather etc the data connection stays on. Do I have to disconnect it manualy every single time so it doesnt drain my battery? It is very annoying since I have to do it manually very often.
Please advise... maybe I am missing something...
Cheers
Pete
Click to expand...
Click to collapse
This really isn't a problem, I've seen N95's that retain their connection at all time (and some that don't) and to be honest it just makes your handset a little quicker.
WMLongLife is the nuts. You need it.
Thanks for the link, I pay per minute on my connection (rather than data transferred) so an open connection is not good for my bank balance

3G taking over in standby??

Something strange since my upgrade to 1.66 - when the phone's in standby it appears to be establishing an active 3G connection, and when i wake (unlock) the phone, you can watch as it reconnects to the current wifi connection again. Is this some sort of energy saving strategy, which could theoretically run your 3G bill up? (dont matter to me as mine is unlimited, but not all are).
Anyone else notice/know about this?
By default, Wifi is disabled during standby to save power. So if a program requests an internet connection, for example outlook if you configured it to check mail automatically, the phone will connect the data connection.
You can search for "wifinostandby" to find a fix that disables auto wifi power off.
But beware that current consumption with wifi on is substantially higher than when it's off, by 10 times (current draw is about 50mA vs 5 for "true" standby), meaning you get at best 30h standby life if doing nothing else.
Also, dont forget that the top bar shows you the connetion being offered by your network, it doesn't necessarily mean it's doing anything. If you disable the wifif you see the same 3g icon regardless of what data is doing. So as said above, you go to standby, wifi is disabled so the wifi icon vanishes, then if you have your phone in 3g mode (personally mine stays in gsm mode, so i see an E not a H) when you wake it up it will display the H before the wifi kicks in and the icon changes back to wifi again.

How to keep Mobile access point alive?

Hello,
I'm using SGS mobile access point from time to time with some difficultly.
Are there anyone who can tell me how to keep the connection running when the phones screen goes blank ?
When it does that I loose the connection and I have to reconnect the mobile access point.
If a tap the screen from time to time I can keep the connection live but even when I do that the wi-fi connection drops after a while !?!?
So, what should I do to get the mobile access point to stay alive ???
Cheers,
//arcspin
If you talking about wifi then change the wifi sleep policy in settings on the cost of battery life.
Wi-Fi Lock from market.
Ok, thanks mates,
I will try to dl wi-fi lock and see if that does the trick.
is there anyway to keep the 3G connection on all the time
because im using the im+ massenger and its disconneted from time to time ???
help me guys

Categories

Resources