Hey,
after I upadted my LG GT540 i can´t reset it to factory standarts. Evertime I want to go to the settings it tells me that the Process has to shut down. There is no chance to get in to the settings.
How can I fix this.
I tried to Upadte over again but there is the same Problem. WHY !?
never had that problem, even updated to 2.2 no problems. try factory reset, as you can not go into setting to do it you can do it via combination of key presses volume up home and search button. hope it helps
Yep. That fixed everything.
THX
Related
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
abiis said:
GOOD DAY I HAVE AN HTC BLACKSTON AND HAVE A STRANGE PROBLEM WHEN I FINISH A PHONE CALL THE PHONE FREEZ AND REFUSE TO WORK. AFTER EACH CALL I HAVE TO DO A SOFT RESET CAN YOU HELP PLZ WITH THIS PROBLEM 10XXXXXX
Click to expand...
Click to collapse
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Fallen Spartan said:
Could you provide us with the following info:
Which rom are you currently using?
Have you recently flashed a new rom? Problem may be with this rom in particular
What is your current SPL?
When did this first start happening?
Have you recently installed any apps?
Have you recently changed any registry settings/tweaks?
This may help us narrow down your issue
Ta
Rick
Click to expand...
Click to collapse
good day
* i am using original rom 1.14.421.5 (25590) wwe
*no didnt flash any rom
*IT HAPPENS WITH ME SINCE 2 WEEK
*YES GPS SOFTWARES BUT AFTER the problem
*ONLY THE REGISTARY OF CAM TO SHOW THE EXTRAS AND NETFRAME FROM 3.5 TO 3.7 ALL THIS IS SINC TWO DAYS
NB= MY PROGRAM MEMORY IS USING 45% OF THE CPU IS THAT NORMAL WHEN I DO SOFT RESET IT RETURN TO 37%
thanks
any ideas plz
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Mastoid said:
Hi there abiis,
You can try resetting your phone back to factory settings by performing a Hard Reset. Try to uninstall any programs that you may have recently installed first that may be causing a conflict. You can backup any data on your phone (such as Contacts, Messages, etc) using PIMBackup before you perform a Hard Reset.
To perform a Hard Reset, try the following:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
3. Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
i know this option but i need a solution without having a hard reset thanks any way
can't you just backup before hardreset ?
To be honest, I think a Hard Reset would resolve your problem with the dropped calls... but if you are unwilling to perform a hard reset, then I would suggest that you try sending your phone back to HTC for repair assuming it is still under warranty?
Best Regards.
well this depends greatly
which end call button is he using. if it the red software one then its a software problem, and this would be remedied with a had reset
if its the one on the bottom of the phone with the 4 button (start call, home, back and end call) then this could indicate a hardware issue and in that case i recommend a return to vendor
Just got my device today, and the hardware buttons stopped working after about 30mins. occasionally the volume button will work for a few seconds but thats it. i cannot flash dexmod cos of the lack of functioning keys. is there something i can do to make the keys start responding?
It seems as hardware problem. But try to wipe data / factory reset in settings
done that already...the keys are still not working. is it possible to apply the adhoc fix to the stock rom? (using the updater in settings)?
5[Strogino] said:
It seems as hardware problem. But try to wipe data / factory reset in settings
Click to expand...
Click to collapse
bookoo_brainz said:
done that already...the keys are still not working. is it possible to apply the adhoc fix to the stock rom? (using the updater in settings)?
Click to expand...
Click to collapse
Can't be a hardware problem if you can navigate the recovery menu to access wipe/clear
i have not been able to access the recovery menu, what i did was to install button savior and reset to factory settings thru the settings menu. button savior does not work in the recovery kernel.
Couldn't find a thread with precisely same situation - this morning I left my Iconia with WiFi off on standby with plenty of battery left (70ish %), only to just find it powered off. Now when I try to power it on, it stays in the Android boot animation and doesn't go anywhere from there.
And like I said in the title, it isn't rooted or in any other way hacked, so this is really weird. I think a factory reset would make it work, maybe, but if anyone has any other ideas I'd love to hear them before resorting to wiping.
Also I have no idea how to do a factory reset without CWM. Long press reset button doesn't seem to work?
Hold Volume Down while turning Power On?
Nope...it tries to run update.zip
salleq said:
Also I have no idea how to do a factory reset without CWM. Long press reset button doesn't seem to work?
Click to expand...
Click to collapse
A simple method for wiping is described in this thread.
Alternatively you can connect an USB keyboard, boot to recovery (vol-down + power) and press HOME on the keyboard. This will open a menu where you can select factory reset.
It got stuck at "Erasing cache" but I just shut it down and rebooted, now it started. Thanks a lot. Somehow I think I'm going to root it now and put CWM so I won't have to lose all my data because STOCK ROM crashes for some weird reason and I don't have a backup.
in my opinion u should just go ask for replacement....
Hallo guys, i just flashed N7000XXLPY via ODIN. Everything worked well but I have one big issue (that wasn't discussed in "bugs" thread).
Whatever I select, Swipe Unlock, Face recognition, Draw pattern, PIN code or whatever, it reacts the same: never requires swipe, PIN, pattern or else for unlocking. If i press briefly the power button, the display light switchs off. If I press again any other button (volume, home or power), the display light turns on but never asks for any method of unlocking. What to do? Does anyone else have the same issue?
Not happening here. Try a hard-reset after flashing a new ROM.
I have swipe unlock by default and it works. Screen does not power on when you press volume button, only if you press power or home button.
Thanks vcespon for your quick response. I tried hard reset via "Volume UP + Home + Power" method, I wiped cache, I tried hard reset via changing the CSC, I restored it to factory settings from menu, nothing worked. Any other oppinion?
LE: I found another issue, maybe is related with the first one. When I want to switch off the phone, I press (for 2 seconds) the power button and it just go to Samsung logo and swhitches off, without asking me those two questions about what I want to do (to can choose beetween flight mode, silent and power off) and if I'm sure that I want to power off the phone.
LE2: Tryed also Indian version (N7000DDLP8), no improvements.
ludiconiric said:
Thanks vcespon for your quick response. I tried hard reset via "Volume UP + Home + Power" method, I wiped cache, I tried hard reset via changing the CSC, I restored it to factory settings from menu, nothing worked. Any other oppinion?
LE: I found another issue, maybe is related with the first one. When I want to switch off the phone, I press (for 2 seconds) the power button and it just go to Samsung logo and swhitches off, without asking me those two questions about what I want to do (to can choose beetween flight mode, silent and power off) and if I'm sure that I want to power off the phone.
LE2: Tryed also Indian version (N7000DDLP8), no improvements.
Click to expand...
Click to collapse
DO NOT WIPE ON LPY!!!
http://forum.xda-developers.com/showthread.php?t=1633938
DaanJordaan said:
DO NOT WIPE ON LPY!!!
http://forum.xda-developers.com/showthread.php?t=1633938
Click to expand...
Click to collapse
I already did it, not knowing that I might brick it.
Thanks for the advice, I won't do it in the future till a safe official Kernel will be released.
Any solve to the issue that I have?
After another search I can see that there are others that encounter the same problem, here is the topic http://forum.xda-developers.com/showthread.php?t=1651005
Hello Sir
Sir i am facing the same problem i have bought galaxy not n7000 and the problem i am facing is i have updated it to official ics indian rom and now i am not able to activate screen lock function and if i hold the lock buttton for 2-3 seconds the phone gets switched off, is it because of the kernel problem or anything else, i tried giving it to the samsung store but they dint fixed it. P.S i was not able to update my mobile through Kies as it said "this device can not be updated through kies" please help...
I just found a fast way to fix this problem.
1. Root your device.
2. Use this solution:
Download from Market "Terminal Emulator"
Open it and type this commands:
su
echo -n ON > /efs/imei/keystr
sync
reboot
100% works !
vcespon said:
not happening here. Try a hard-reset after flashing a new rom.
I have swipe unlock by default and it works. Screen does not power on when you press volume button, only if you press power or home button.
Click to expand...
Click to collapse
are u serious??? Never ever hard reset on the lpy!
Hello Sir
yes it worked, but will it go away if i flash it again with other rom and dont root it???
I've flashed the new Vodafone Germany 20B rom, with this rom you can't access recovery/rteset mode. Rom booted but is stuck in a mass of force closes. I can't factory reset as i can't get through the menus. ADB can't find the device... Any ideas at all?
Pretty dsure a factory reset would fix it.
ephumuris said:
I've flashed the new Vodafone Germany 20B rom, with this rom you can't access recovery/rteset mode. Rom booted but is stuck in a mass of force closes. I can't factory reset as i can't get through the menus. ADB can't find the device... Any ideas at all?
Pretty dsure a factory reset would fix it.
Click to expand...
Click to collapse
You should be able to use the stock bootloader Factory reset.
Power off by holding the power button down for about 15 secs. Hold the power button and Vol down until the LG logo appears, then release both briefly and press both again. Follow the on-screen instructions.
LenAsh said:
You should be able to use the stock bootloader Factory reset.
Power off by holding the power button down for about 15 secs. Hold the power button and Vol down until the LG logo appears, then release both briefly and press both again. Follow the on-screen instructions.
Click to expand...
Click to collapse
Read my post again Unfortunately that button combo doesn't work anymore on this update. I tried multiple button combinations with no luck.
In the end i downgraded to a Jellybean KDZ, still got the force closes but this time i could reset using the button combo. Then updated to the German Voda release.
Just a warning for anyone updating to it... Make a full factory reset/data wipe first or you may end up in my situation!
ephumuris said:
Read my post again Unfortunately that button combo doesn't work anymore on this update. I tried multiple button combinations with no luck.
In the end i downgraded to a Jellybean KDZ, still got the force closes but this time i could reset using the button combo. Then updated to the German Voda release.
Just a warning for anyone updating to it... Make a full factory reset/data wipe first or you may end up in my situation!
Click to expand...
Click to collapse
Read your post again - sorry can't see any reference to hardware/physical buttons.
Anyhow - glad you sorted it.