Related
I bougt Nook Color this week and messed it up very first day.I rooted it and installe CM7.1.WhenI try to connect to Windows7 pc ,the computer immediately crashes.
2.When I try to use nook it boots in CM7 ok but I keep gettig message "android.process.acore stopped unexpectedly try again_ Force close"every 2-3 seconds and can not get rid of it.I reinstalled CM 7 several times with no effect.I accidently deleted fctory recovery partition and can not go back to original state.I am left with display of bothersome message showing again and again.
Please suggest any answers .
If you are having that many problems already I would start from scratch. If you are able to flash the stock image in CWM but if you cant use this thread. You nook does boot but the thread shows you how to restore it to stock without CWM.
http://forum.xda-developers.com/showthread.php?t=949699
once you can boot into your nook successfully I would check if your nook has the new partitions vs the old ones. Did the box it came in have a blue dot sticker on it?
This post has the steps for the newer and older partitions. Make sure you have the latest versions of everything, would be my advice.
Some people get that error when Gmail is syncing. You might try to turn off Gmail autosyncing to see if the error persists.
Nook Color does boot alright in CM7 but the annoying message I mentioned keeps coming on every 2-3 seconds.
Try flashing the current nightly. Its pretty stable for me
some problems resolved
Thanks everybody,I tried everyting you people suggested and did not resolve anything and I was almost ready to throw it in trash since I had wiped B&N factoryrecovery partition by mistake and could not go back.Then I wiped out CM7 and installed Honeycomb V2 version Now everything is working .That disgusting message is gone.My pc was crashing because I was connecting Nook to USB3 port.I connected to USB2 port and it does not crash but Nook is not recognised by pc.Windows 7 tries to install drivers for Nook but fails as it can not find drivers.Any suggestions please.
akramarshad said:
I connected to USB2 port and it does not crash but Nook is not recognised by pc.Windows 7 tries to install drivers for Nook but fails as it can not find drivers.Any suggestions please.
Click to expand...
Click to collapse
This link may help: http://forum.xda-developers.com/showthread.php?t=882751
I tried this,downloaded the driver and installed it.PC says Nook is installed and working properly and even seen in devices but does not show up in my computer in windows explorer so I can not access it.
What's a "prble"? Is it anything like one of these guys?
akramarshad said:
I tried this,downloaded the driver and installed it.PC says Nook is installed and working properly and even seen in devices but does not show up in my computer in windows explorer so I can not access it.
Click to expand...
Click to collapse
I had similar experience - last week - and learned I just wasn't familiar with the device..
On bottom of Nook Screen - there is a task bar of sorts with a little USB icon that pops up on the NC when plugged into PC (WIN 7 here). Drag the window open from bottom - select option to copy / transfer files to your computer - and then turn on USB storage and your device should show up on pC as MyNOOKcolor - and SD card.
After you're done transferring files, eject both drives individually from your PC ( I do SD card eject 1st - and MyNOOKcolor 2nd ) - and it should close your USB storage on your device and you should be good to go..
Hi,
I’m running into an odd problem.
I have a Google Nexus 7 Tablet. I’ve unlocked and rooted it with the Toolkit. I’m attaching it via USB on a Windows 7, 64 bit system. I’ve installed the PDANet drivers.
I’ve made a back up of my tablet using Titanium Backup. Within the Titanium Backup directory are many small files, that I’d like to copy back onto my desktop for safe keeping.
However every time I copy the directory over to my PC using Windows Explorer, only a fraction of files get copied, I’d say about 20%. I’ve tried it several times, but, can’t seem to get it to do a complete copy. I’ve tried selecting the entire directory and the all the files (select all) without success.
When you plug in the micro USB cable to your tablet, does it automatically go into mass storage mode (though I have selected Mass Storage mode as my option).
I’m coming from several Samsung devices and I know there are a few ways to enable mass storage mode on them, and at a minimum, you have to choose to mount the SD card. Is there something similar with Asus devices?
What am I missing?
Thanks!
I rarely send files via the USB port... normally just use the wifi connection. Just sent all the TI backup files via AndFTP to a server over WiFi and it only a little more than 5 minutes.
I then for the first time, hooked up the N7 to my USB to transfer the files to my notebook.
Didn't make any changes.
Created a new directory on my Notebook (Win7Pro) and then opened the drive on the N7, found the TitaniumBackup directory and selected all the file (not the directory holding them).
Took about 5 mins to move the files which was about the same as the Wifi transfer.
Not errors, and all the files got there.
Not sure if that helps you...
Oh. the N7 is rooted with TWRP recovery on it but otherwise Stock.
BTW.. this morning I tried this app which is a sync app between my workstation at home and the Droid. Worked good enough I upgraded and now have a number of manual syncs setup (droid to computer)
https://play.google.com/store/apps/details?id=com.jrtstudio.SyncFolders
krelvinaz said:
....
Didn't make any changes.
...
Not errors, and all the files got there.
Oh. the N7 is rooted with TWRP recovery on it but otherwise Stock.
Click to expand...
Click to collapse
krelvinaz said:
BTW.. this morning I tried this app which is a sync app between my workstation at home and the Droid. Worked good enough I upgraded and now have a number of manual syncs setup (droid to computer)
https://play.google.com/store/apps/details?id=com.jrtstudio.SyncFolders
Click to expand...
Click to collapse
Hi krelvinaz,
Thanks for taking the time to test that for me. I did exactly the same procedure as you. I'll play with it some more and see if it was just a bad driver install or something. Perhaps I'll try it on my laptop at work...
And thanks very much for the link... that app does look promising indeed. I really appreciate that it doesn't sync with the cloud, but with my pc. That's great.
Thanks again for your help!
Update:
Ok, well I tried to copy the same files on my work laptop, which is running XP, and without any additional drivers, and it stopped at exactly the same place, at one particular file.
I then deleted that one backup file, and tried to copy the directly again, and it worked. I then tried again on my Windows 7, 64 bit desktop and it too was successful!
I guess that file was corrupted or something.
I'm glad I figured it out, and thanks again krelvinaz.
I got my N7 today. Just plugged in USB to my computer and copied my "backup-apps" folder and my MP3 folder from my phone. Moved very fast, now I have about 150 .apk's I can install if I have recognition problems with the Play store, and 2000 songs.... using up my "16" gb fast... about time to root and add stickmount.
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Use a different cable or usb port. Something is causing the phone to stop communicating with the computer. Also, make sure you don't have any power saving features enabled that may be turning of power to the usb port in Windows.
I've tried that and it still has the same issue.
Just unrooted and performed a factory reset. My phone is totally stock and doesn't allow me to copy any files onto it.
Does anyone have any idea?
[SOLVED]
Solved this by taking out my SD card, restarting my phone, putting the SD card back in and formatting it.
You can format by going into Settings > More > Storage > (Scroll to bottom) Format SD Card
That's right, it was not easy to find... Thanks!
cruise350 said:
Use a different cable or usb port. Something is causing the phone to stop communicating with the computer. Also, make sure you don't have any power saving features enabled that may be turning of power to the usb port in Windows.
Click to expand...
Click to collapse
Effectively, you have to turn off the ENERGIE ECO on your Tablet.
another way to see that the SDCARD is not responding, is to browse inside the Folders. They seems to be empty.
regards:good:
connection problem solved
FeversMirrors said:
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Click to expand...
Click to collapse
i was getting the same problem,so i uninstalled the driver and then connected the mobile .
secondly i also have installed wondershare mogile go on my mobile and pc , so when i connected my mobile to pc after uninstalling the driver the mobile go pop up came up for usb installation and it asked for installing the usb driver for mobile go ,it asked me to swithonn the usb debugging ,and it installed the driver then it just worked fine .
may be it was a mobile go problem (any software) or Driver Problem but it helped so no need to format,reset or remove your card . just try this and tell wat helped.thank you.
This is a Driver Problem.
All I had to do was plug the usb cable into the usb port that i installed the device to. My PC won't read the phone right from any other USB port. I hope this helps
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
it didn't work for me
you have to fix permissions
it happened to me on my gt-n7100 (Galaxy Note II ) with android 4.4.2, you have to install TWRP (Team Win Recovery Project see how then reboot into recovery select ''advanced'' hen ''Fix Permissions'' that worked for me
you can use chmod to fix this it works too
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
:good::good::good:thanks a lot bruh, here i was thinkin i did somethin wrong on my phone but it was the file that had the problem, and the reason for the error
midoucaca said:
it happened to me on my gt-n7100 (Galaxy Note II ) with android 4.4.2, you have to install TWRP (Team Win Recovery Project see how then reboot into recovery select ''advanced'' hen ''Fix Permissions'' that worked for me
you can use chmod to fix this it works too
Click to expand...
Click to collapse
!!!
This did it for me. I already had TWRP installed and after quickly doing this I was able to copy to/from my SD card. It also fixed the problems I was having copying/moving things from internal storage to the SD card using ES.
FYI, It also caused XPosed to break until I rebooted again.
THANKS SO MUCH!
Doing this now, thanks so much! Wonder why that happens.
Didn't work unfortunately. Other files seem to be moving over just fine. All except this 1.6GB file (checked space, that's not the issue), where I cannot send either to Internal or SD Card. Maybe it's a corrupt file?
JJ
eNonsense said:
!!!
This did it for me. I already had TWRP installed and after quickly doing this I was able to copy to/from my SD card. It also fixed the problems I was having copying/moving things from internal storage to the SD card using ES.
FYI, It also caused XPosed to break until I rebooted again.
THANKS SO MUCH!
Click to expand...
Click to collapse
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
Yeah! Exactly! I was trying to copy an unfinished movie that was still downloading in torrent. It was stuck at 98.8% and it was playing fine in my computer. Only this file was not copying in my phone. and anyways i couldn't get it to my phone because it never downloaded 100% due to lack of peers, and i could copy other files. This means MTP mode does not allow to copy corrupt or half files and there is no mass transfer mode now a days...
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
I was able to copy the unfinished file by mounting External SD in TWRP btw....
FeversMirrors said:
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Click to expand...
Click to collapse
I've changed the file type which was a (.zip) to a (.mp3) and transferred the file. It worked.
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
This is the answer to this thread!
Guys this is dumb but instead of moving the file that wasn't working onto my SD card, I just moved it to my phone and it worked the first time.
Another fix - go to usb options, set to use as USB 3.0 device
Since this is the first thread that seems to come up when I googled the issue, I'll post the fix here...
though I'm on a Galaxy S5, not the S4. I'm guessing it's the same deal.
When I plugged in with USB and tried to copy a 1.2 gig file, it gave me the error message, though many large files had worked in the past.
I tried a reboot, pulling the SD card, and making sure my USB hubs didn't have the "let windows shut this off to save power" option checked.
So I tried pressing the "Connected as a media device via USB" notification when I slide the notification bar down. There are 3 options, MTP, PTP, or USB 3.0.
I changed to USB 3.0 and the file copied fine, and much faster too, about 1.5 or 2 minutes for 1.2 gigs.
This actually works.... - Raj
Hello!
I just started having issues with my android phone and the ability to select the USB connection type (Charge, MTP, PTP, etc...)
I was getting the notification fine 10 minutes ago. But now it doesnt appear anymore....
I might have something to do with this issue.
I was trying to move files over to the phone and the file transfer froze and wasnt responding on windows PC.
I unplugged the phone and the transfer screen went away, tried to plug it in again and windows listed it as an unknown device.
Both of my windows PCs are having this problem. The USB cord still works as I have tested it on other devices. I have tried enabling USB debug mode and that didn't help.
My phone boots, all the apps seem to be working fine.
I have a samsung 64 gb micro sd inserted into the phone and it it formatted for marshmallow. (currently using this ROM: [ROM][Lux][XT1563/2] ֍ Marshmallux ֍ Stock based rom 6.0 [MPD24.65-18])
Couldnt find another post about this issue so Any help would be super.
So i figured out its something to do with windows 10.
I plugged my phone into a windows 7 pc i have and it worked as it did before.
solved
A simple restart did the trick.
Wasn't sure why this would help since i was having the issue on two windows 10 devices.
This seems like a really small problem so moderators can choose to delete this if the post is redundant.
Hi. I am a Windows Phone transplant. I got my Nokia 6 from Amazon and I am connecting it up via USB to put my music collection on the SD card. When I connect, it mounts as a CD and there is a setup for what looks to be the drivers there. When I run setup, nothing happens. The computer is Win 10. When I took the phone out of the box (from Amazon US), I noticed that the Amazon preloaded app took me to the Chinese Amazon site. so I think that this version is based heavily on the Chinese ROM. Does anyone have a direct link to the USB drivers for the PC? The ones I have seen on searching all look very dubious.
It was pretty cool turning this phone into an Android powered/Microsoft Services phone.
thanks
The Amazon app is just configured for Chinese. You can select another language, just go to the link next to the flag, drop down box, find the USA flag.
For the USB connection, after you connect the phone to the PC, on the phone, swipe down from the top and you should see a notification "USB *****". The "****" could be PTP, charging, MTP, etc. You want to use MTP to transfer files to the phone.
I am using MTP to connect, but has I mentioned, The phone is opening as a CD-ROM on the computer where there is a setup program with Drivers on it and it is write protected. If I try to run the setup program that it presents, Nothing happens. It starts, and gives me the Admin make changes screen, but after that nothing. This is the drivers that I think need to be on my computer to mount the phone properly to transfer files.
Mine did the same but as the previous poster said change it to mpt on the phone then in file explorer Nokia 6 appeared and when I clicked on it both the internal and sd cards showed up and I copied my music folder directly to sd card
Sent from my SM-T800 using XDA Free mobile app
I have the same issue. I tried choosing the MTP, even PTP as well, from the USB options, but still no luck in seeing the internal storage of my phone. Maybe this is a Windows 10 issue? I tried connecting my phone on my windows 8.1 PC and it worked fine. Anybody has a workaround on this?
my phone always have a pop-up ask me if I want to enable file transfer when I connect to a pc, maybe check if yours have the same pop-up.
Sent from my TA-1003 using XDA Labs
Phone does not show as drive
When I connect my Nokia 6 via USB, I get a popup asking what i want to do (charge, charge and transfer and two I can't remember at the moment). It does not show up as a (USB) drive (i.e. it is not assigned a drive letter), but among the Libraries (like Downloads, Pictures, etc.). I see the CD-ROM drive with the USB driver setup as well, but I guess you only need that when the phone does not show up right away. (Maybe on older versions of Windows?)
I can write to the phone and the SD card. I have a 64 GB Samsung class 10 card, it writes at only 12 MB/s; is that normal?
When I clicked 'Properties' on the SD Card, I saw that it was formatted as FAT32, so that explains why I can't write large (>4 GB) video files to it. Shame. Does anyone have an idea if this is ever gonna change?. I tried formatting the card to ExFat, but then the phone just says 'incompatible file system' or something like that.
Can't get access to my phone data mother internal nor external
I am using MTP to connect, but has I mentioned, The phone is opening as a CD-ROM on the computer where there is a setup program with Drivers on it and it is write protected. If I try to run the setup program that it presents, Nothing happens. It starts, and gives me the Admin make changes screen, but after that nothing happens. Pls help me guy's......
I have the same problem on Windows 8.1 x64
Nevermind, I found the solution for my device, I can't guarantee it's the same for you.
Open your settings on your phone
Go to About Phone
Repeatedly tap on Build number untill a message pops
up saying that you're a developer now.
Go back into settings and open Developer options now
Scroll down and find USB Debugging and turn it on.
That's it, you should be able to manage your files now
Finally Nokia is making Andorid based phones now. Because Android is the kind of OS people need today. With tons of application choice.
You can download the ADB driver for your Nokia in this link:
https://dl-ssl.google.com/android/repository/latest_usb_driver_windows.zip
change your cable. That's what the problem is