KK Not entirely sure how it happened. Aware of just how difficult it is to actually brick an android device but until I can sort this out thats precisely what I've got.
Was following the guide to downgrade from Steve's 2.2 (fresh from QDLTools) to 1.6, successfully downgraded to 2.1. Then Followed the instructions to 1.6, but after hitting the apply update.pkg it worked for a bit, then went to reboot and nothing happened. device wouldnt turn on, or do much of anything. Pulled battery and whatnot, then it would turn on and go to the dell logo...and nothing else. Can't load recovery, can't get into fastboot, or anything else. Any ideas what I did and how to fix?
I had an issue recently where I was stuck at th Dell logo. I ended up using using QDLTools from scratch. Make sure you leave the battery out for at least a minute before trying to get it into fastboot.
QDL hung on reboot every time, buddy at BBY told me to bring it in amd exchange it since its only a couppe days old so I went ahead and did that.
Related
I just rooted my streak as normal and now it will not boot.
When I turn it on, it just displays ''dell'' but stays there forever.
I flashed it before and it was fine but now it is stuck.
Any way I can fix this?
i am no expert, but you'll have to give a lot more information than that
16.?
2.1 ?
versions
how did you flash?
how did you root?
to "fix" your Streak, reverting back to the Update.pkg should get you back working
grizlore said:
i am no expert, but you'll have to give a lot more information than that
16.?
2.1 ?
versions
how did you flash?
how did you root?
to "fix" your Streak, reverting back to the Update.pkg should get you back working
Click to expand...
Click to collapse
2.1
Build 6267
How can I flash it when there is no superboot 6267 version yet?
Basically What happened is I upgraded my streak from 1.6 to 2.1
I downloaded root explorer but it would NOT work as my streak was not rooted.
I then rooted my streak using superboot but it was for the old version 3883.
The phone did not boot after this. I then tried superboot for build 4399, same thing the streak gets stuck on the dell logo.
I then looked for build 6267 which is what I have but it does not exist.
I wanted to root my streak with the new 2.1 version but it failed and ever since I'm stuck with the dell logo.
I know I can simply reinstall 2.1 but I will have to reinstall all my apps and set my phone up again.
Is there any way I can recover or somehow go back to the build of 6267 WITHOUT losing anything or reinstalling?
The last thing I want to do is reinstall 2.1 all over again...
I just reinstalled 2.1
Works fine now only I need to put all my apps back on as well as configure/setup all the settings...
I am noob in phone flashing. but after goin thru all sources online.. I tried flashing my Streak 5.
I tried rooting with "SuperOneClick2.2", but it was not detecting phone model or so.. So I tried Superboot... after android interface drivers installation.. phone was decteced in FASTBOOT mode and message in phone showed root installed.
After that, my phone is continually flashing the buttons & showing DELL's white logo on the black background.
All procedures were followed to the dot. However, as suggested in the post & elsewhere, I "factory-resetted" the device. Not worked. I then reverted back to the Android 2.2 "Update.pkg" I had in the sd card. Update was done as usual. But the phone just didn't get ON.
That was yesterday. Well today, all of a sudden, when I tried to on the phone, it started!!!!
But new problem, the phone is not rooted. Checked out with the Android emulator. Tried the whole procedure. Went through the same steps. Problem repeated. Solved. Again & again.. the phone refuses to be ROOTED!!!
What could be the problem?
First of all dont bump a year old thread,
secondly superboot will brick the streak as it's designed for a different rom,
thirdly use the guides on xda/wiki to reinstall with a update.pkg,
fourthly there's a guide halfway down the page currently in the dev section on how to root correctly
Use superone click
One click rooting methods are not infallible. The recommended way to root is to manually install StreakMod Recovery then Superuser.zip.
So, I got my new replacement EVO after loosing my first one.
So, first thing I wanted to do was get it rooted.
This time I wanted to try the unrevoked method. I did the other method before and had some issues, but it worked out in the end.
So, I got all the files I needed. And started my process.
I ran the reflash_package.exe and at the end it said this was a triumph...
So, I went and tried to go to recovery mode so I can run the unrevoked_forever.zip. However, I just got a fail. Didn't work.
So, I said, whatever, same issue I had before, let me just do the old fashioned manual way. Got all my files and went and did everything.
http://forum.xda-developers.com/showthread.php?t=765496
Followed that method, which worked for me before.. everything was going well, until the PC36IMG.zip update. First
Hboot 2.02
S- is still on S-On
Bootloaded - Bypassed
Radio_v2 - Failed PU
Everything else OK
I also get 5 vibrates when it tries to update the Radio.
When I try to boot to recovery, I get the red triangle...
When I try to boot normally, I am stuck on the white HTC EVO 4G screen.
Cant do adb shell or anything.
I have already tried to take the card out, put it in a reader, reformat it, replace the PC36IMG.zip, same.
Now the phone is stuck and unusable. What do to? I am unfortunately, out of town for the moment. Stuck in Chicago with no phone.
Anyone please have any ideas how to get out of this loop?
Okay, so more digging and I finally was able to get myself out of the hole I dugmyself into.
http://forum.xda-developers.com/showthread.php?t=829045
Saved my butt. Just rebooted into recovery and let it stand at the red triangle and continued from step 10.
So, S-Off now.. and flashing to Calkulin's as I type...
Hello all. Ok, I had my Streak on Froyo 2.2 via Dells 318 rom. I decided to do a factory whipe. When I booted the phone back up, I was stuck on the Dell Boot Screen forever. I cant figure anything out. I have the 309 recovery image and did all of this with Fastboot. It seems like when I put the phone in fastboot, it goes in fine. I also have the StreakMod recovery I believe it is on the phone as well. Im trying to do everything and cant get my phone past the Dell boot screen. I tried searching everywhere. The thing that gets me is that when I plug the phone into my computer, the comp doesnt bring up a drive to recognize the SD card? I have no way of accessing it through the phone. I have a card reader and can get to the files from that.
Can someone please give me a step by step on what to do here? I went from ATT 1.6 to O2 1.6-2.1 then 2.2. Its been a couple of hours now and I just cant seem to figure this out? Please someone help me? THank you
You can not have 2 recovery's on at the same time its aether 309 recovery or streak mod recovery
If i was you i would re flash the 309 recovery then reinstall the 308 package
the 308 package will only install if you have 309 recovery
Good luck man. I went thru a nightmare like this last night. I ended up getting qdl tool to work and finaly got it to boot. I "THINK", if you can get qdl tool working you might be able to save alot of headache.
I was on the ota 319 and went back to att 1.6 so i could get it setup with 318. Im still confused on how i actualy got it to work.
I've been ROM-hopping, trying Synergy, Alliance, Myn, and several others. On the last one, MikG 2.3, I had it loaded up and working fine. I started installing apps from the Android Market. That, too, was going fine, until it suddenly rebooted in the middle of an app download/install.
It went to the white screen with HTC EVO 4G on it, and then went black, then back to the white screen, over and over.
Six hours later, I'm still stuck in the loop. To make matters worse, I accidentally lost root (I see "S-ON" at the top). So now I'm stuck without root until GB is rooted successfully, which hopefully isn't tooooo far off in the future.
But that's the least of my concerns. I would be extremely happy with a stock install of any sort at this point, but I can't get anything to load. No recovery, no ROMs, but I can get into HBOOT so I'm able to try to load any PC36IMG.zip files. The last one I tried was the "PC36IMG_SuperSonic_GB_Sprint_WWE_4.24.651.1_Radio_2.15.00.05.02_NV_2.15_release_199233_signed.zip" (renamed to just PC36IMG.zip, of course). It appears to load just fine and in the end says "Update Complete... Do you want to reboot device?"
I choose yes, it reboots... and we're back in the loop. I have no idea what to do or try at this point. Any help anyone can provide would be greatly appreciated! My next step is to take it to the Sprint store, but that's over an hour away and will have to wait till the weekend.
Thanks everyone!! If you need any more information, let me know. Believe me, I'll be monitoring this thread closely!
/Kevin
I'm sure uve heard this before and prob won't work but worth a try....try reformatting ur SD card and then flashing the file in bootliader again. Could be a corrupt SD card
Papa Smurf151 said:
I'm sure uve heard this before and prob won't work but worth a try....try reformatting ur SD card and then flashing the file in bootliader again. Could be a corrupt SD card
Click to expand...
Click to collapse
Yeah, I tried. I have several SD cards of varying sizes (4GB, 8GB, and my primary 16GB). Formatted the 4- and 8GB ones and tried from each, but no go. Thanks for the try though!
/Kevin
Reset phone to recovery (stock), choose fastboot. Plug in USB to computer.
Look for the correct ruu exe file and ruu it via exe method
trim81 said:
Reset phone to recovery (stock), choose fastboot. Plug in USB to computer.
Look for the correct ruu exe file and ruu it via exe method
Click to expand...
Click to collapse
Just did it and the process went well, said it was successful... but it's still stuck in the same loop. I'm thinking the phone is beyond repair. Thanks for trying, though. It really looked like it might work for a second.
/Kevin
what was the app?
That's what I want to know and how do you get accidentally to S-On?
Put the phone in a refrigerator ... as crazy as it sounds, it might be the infamous overheating issue.
Put in refrigerator, for about 5min
The app was "Kid Zone" (Zoodles), but I'm not blaming the app by any means. I've used it for a long time, it's highly-rated in the market, etc. I'm sure it's just a coincidence.
As far as getting back to S-ON, I think it must have been when I flashed the stock recovery. I was flashing so many things out of desperation that I can't swear to that, but I'm pretty sure that's what did it. Now that it looks like I'm heading to the Sprint store tomorrow, I guess it's a GOOD thing it's back to S-ON. Heh.
Pretty sure it's not heat-related. My phone was off all night (since it's not usable) in an air conditioned room, so it's cool to the touch. I tried the RUU process again with the same results. (I'm not sticking it in the refrigerator, because I'm afraid of activating the water-damage sensor -- I don't want any excuses from Sprint when I bring it in tomorrow!)
Appreciate the help!!
/Kevin
That sucks, but tbh, I have yet to see one case of anyone at Sprint checking a bootloader to see if a phone is S-On. MOF, I bet if it doesn't boot at all, or is a stock ROM , they wouldn't even know the difference.
HipKat said:
That sucks, but tbh, I have yet to see one case of anyone at Sprint checking a bootloader to see if a phone is S-On. MOF, I bet if it doesn't boot at all, or is a stock ROM , they wouldn't even know the difference.
Click to expand...
Click to collapse
I hear ya. I haven't run into any techs at my local stores that are knowledgeable about this kind of stuff. (I know others have, so you never know, but I have yet to see one.)
/Kevin
To conclude this: I went to the Sprint store today where they assured me they would reload the software but it would take 1.5 hours. I came back 1.5 hours later... and they handed me a new (refurb) EVO. They said they weren't able to load anything on the phone.
So, no surprise with the outcome there. I was fairly certain they were going to have to replace the EVO, and they did.
Thanks to everyone who tried to help, but it was just beyond help!
/Kevin
I had that same problem with my phone back in November. Continues boot loop. Finally, having boot loop for 8hrs, I took it to Sprint and they replaced my phone. They called it a power cycle issue. $35 new refurbished phone works well. Never had a problem since.
ok, so i have the verizon lg g2, i have flashed numerous phones before and never had anything like this happen. First off, it took me hours to just get the thing rooted after going thru about 15 different walkthrus before one worked.
Then i decided i wanted Malladus ROM so i tried flashing twrp recovery with loki, didnt work, went thru damn near every forum about it coming out with nothing....until...found one talking about flashify and everyone said it worked fine. So i do it, took about 1 second and said it worked, restarted and nothing had changed, except now i cannot enter download mode! When i do it just shows "firmware update" it never changes, left it on all night still at 0%.
I have unrooted it (even though it still says its rooted, but no longer have permissions) and i did a full reset, NOTHING works!!
So before you guys chime in, let me tell you what i have tried....EVERYTHING lol .....I know the only way to fix my phone to fully unroot it is to flash back to original rom, so i went to http://forum.xda-developers.com/showthread.php?t=2448960 and that wont work because 1. cant get into dl mode, and 2 it wont let me open the flash tool (did everything right, researched and came up with nothing)
then i went to http://forum.xda-developers.com/showthread.php?t=2432476 cant get that to work either because cant get into dl mode, so now i have TWO 2.2gb rom files on my comp that i cant use,
And just to be clear, I KNOW HOW to go to dl mode lol, i have wrote it several forums and all people keep saying is the stuff ive already said.
Oh and i cant push with adb either...that is how i originally tried twrp and after 3 hours of trying to figure it out i finally got it to go thru (it was wrong i think but it worked) and that may be what has caused it to crash the dl screen.
Ive never used adb before and after reading 7 diff forums beginning to end (bout a 1000 pages) i realized they were all the same but do not actually explain enough for someone who has never one it. It said to push, well idk what that meant! lol I need step by step instructions in order to fix this, even the tiniest of things may be something i would miss.
PLEASE HELP ME!!!! Thanks guys!
Download mode should work... The first night I got my G2 it was about 4 in the morning, and I immediately installed TWRP on it (3.2 is what you want 3.3 doesn't work), and promptly erased everything on my phone... Partition, data, and everything.
But download mode was still intact, and that first thread you linked worked just fine for me. If you're having issues with that flash tool and being stuck at a login screen, you missed the part where it tells you to download a DLL file and place it the flash tool install directory. That file will bypass the system login and let you use the program.
I don't know how long you've been up, but I'd say take a break and come back to it in a bit. If you still can't download mode to work, have a friend come over and look up how to get in download mode, then have them try it. I've done that many times... Thought I was doing everything right and a second pair of fresh eyes found some tiny thing I overlooked in the process.
I hope you get your phone working man, sorry I can't be of more specific help.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.